Installation Material from OBO Bettermann

Surface-mounted clamp for holding metric steel armored pipes, light and heavy insulation pipes and Quick-Pipe electrical installation pipes. Universal fastening options on walls and ceilings indoors and in protected outdoor areas. With slotted hole for lateral alignment when mounting with wood screw or impact anchor. Tool-free pipe mounting. Can also be mounted in series with OBO Multi-Quick or starQuick clamps. Sizes M16 - M32 can be screwed onto M6 thread. Fastening distance 50 - 60 cm, max. pull-out values F at 20° C room temperature, see table.
Lieske Part No.: 495512

Surface-mounted clamp for holding metric steel armored pipes, light and heavy insulation pipes and Quick-Pipe electrical installation pipes. Universal fastening options on walls and ceilings indoors and in protected outdoor areas. With slotted hole for lateral alignment when mounting with wood screw or impact anchor. Tool-free pipe mounting. Can also be mounted in series with OBO Multi-Quick or starQuick clamps. Sizes M16 - M32 can be screwed onto M6 thread. Fastening distance 50 - 60 cm, max. pull-out values F at 20° C room temperature, see table.
Lieske Part No.: 151992

Surface-mounted clamp for holding metric steel armored pipes, light and heavy insulation pipes and Quick-Pipe electrical installation pipes. Universal fastening options on walls and ceilings indoors and in protected outdoor areas. With slotted hole for lateral alignment when mounting with wood screw or impact anchor. Tool-free pipe mounting. Can also be mounted in series with OBO Multi-Quick or starQuick clamps. Sizes M16 - M32 can be screwed onto M6 thread. Fastening distance 50 - 60 cm, max. pull-out values F at 20° C room temperature, see table.
Sales unit: 50 pieces
Lieske Part No.: 284233

Surface-mounted clamp for holding metric steel armored pipes, light and heavy insulation pipes and Quick-Pipe electrical installation pipes. Universal fastening options on walls and ceilings indoors and in protected outdoor areas. With slotted hole for lateral alignment when mounting with wood screw or impact anchor. Tool-free pipe mounting. Can also be mounted in series with OBO Multi-Quick or starQuick clamps. Sizes M16 - M32 can be screwed onto M6 thread. Fastening distance 50 - 60 cm, max. pull-out values F at 20° C room temperature, see table.
Sales unit: 25 pieces
Lieske Part No.: 369127

Surface-mounted clamp for holding metric steel armored pipes, light and heavy insulation pipes and Quick-Pipe electrical installation pipes. Universal fastening options on walls and ceilings indoors and in protected outdoor areas. With slotted hole for lateral alignment when mounting with wood screw or impact anchor. Tool-free pipe mounting. Can also be mounted in series with OBO Multi-Quick or starQuick clamps. Sizes M16 - M32 can be screwed onto M6 thread. Fastening distance 50 - 60 cm, max. pull-out values F at 20° C room temperature, see table.
Sales unit: 20 pieces
Lieske Part No.: 1324385

OBO Quick clamp type ALQ M, for all metric aluminum pipe systems as well as light and heavy insulating pipes. Suitable for holding the OBO pipe system, material: aluminum.
Pipe centering aids enable optimal insertion of the pipe and automatically rotate the clamp into the correct position.
Elongated hole for lateral alignment when mounting using a wood screw or impact dowel.
Recommended fastening distance 50-60cm.
Lieske Part No.: 1339133

OBO Quick clamp type ALQ M, for all metric aluminum pipe systems as well as light and heavy insulating pipes. Suitable for holding the OBO pipe system, material: aluminum.
Pipe centering aids enable optimal insertion of the pipe and automatically rotate the clamp into the correct position.
Elongated hole for lateral alignment when mounting using a wood screw or impact dowel.
Recommended fastening distance 50-60cm.
Sales unit: 100 pieces
Lieske Part No.: 1339145

OBO Quick clamp type ALQ M, for all metric aluminum pipe systems as well as light and heavy insulating pipes. Suitable for holding the OBO pipe system, material: aluminum.
Pipe centering aids enable optimal insertion of the pipe and automatically rotate the clamp into the correct position.
Elongated hole for lateral alignment when mounting using a wood screw or impact dowel.
Recommended fastening distance 50-60cm.
Sales unit: 100 pieces
Lieske Part No.: 1339144

OBO Quick clamp type ALQ M, for all metric aluminum pipe systems as well as light and heavy insulating pipes. Suitable for holding the OBO pipe system, material: aluminum.
Pipe centering aids enable optimal insertion of the pipe and automatically rotate the clamp into the correct position.
Elongated hole for lateral alignment when mounting using a wood screw or impact dowel.
Recommended fastening distance 50-60cm.
Sales unit: 50 pieces
Lieske Part No.: 1339143

OBO Quick clamp type ALQ M, for all metric aluminum pipe systems as well as light and heavy insulating pipes. Suitable for holding the OBO pipe system, material: aluminum.
Pipe centering aids enable optimal insertion of the pipe and automatically rotate the clamp into the correct position.
Elongated hole for lateral alignment when mounting using a wood screw or impact dowel.
Recommended fastening distance 50-60cm.
Sales unit: 50 pieces
Lieske Part No.: 1339142

OBO Quick clamp type ALQ M, for all metric aluminum pipe systems as well as light and heavy insulating pipes. Suitable for holding the OBO pipe system, material: aluminum.
Pipe centering aids enable optimal insertion of the pipe and automatically rotate the clamp into the correct position.
Elongated hole for lateral alignment when mounting using a wood screw or impact dowel.
Recommended fastening distance 50-60cm.
Lieske Part No.: 1339141

OBO Quick clamp type ALQ M, for all metric aluminum pipe systems as well as light and heavy insulating pipes. Suitable for holding the OBO pipe system, material: aluminum.
Pipe centering aids enable optimal insertion of the pipe and automatically rotate the clamp into the correct position.
Elongated hole for lateral alignment when mounting using a wood screw or impact dowel.
Recommended fastening distance 50-60cm.
Sales unit: 20 pieces
Lieske Part No.: 404656

Surface-mounted clamp for holding metric and PG pipes as well as Quick-Pipe electrical installation pipes. Flexible clamping range of several millimeters. Universal fastening options on walls and ceilings and can be used in profile rails indoors and in protected outdoor areas. Tool-free pipe installation. Can also be arranged in series with OBO Quick or starQuick clamps.
Sales unit: 100 pieces
Lieske Part No.: 394786

Surface-mounted clamp for holding metric and PG pipes as well as Quick-Pipe electrical installation pipes. Flexible clamping range of several millimeters. Universal fastening options on walls and ceilings and can be used in profile rails indoors and in protected outdoor areas. Tool-free pipe installation. Can also be arranged in series with OBO Quick or starQuick clamps.
Sales unit: 100 pieces
Lieske Part No.: 843087

Surface-mounted clamp for holding metric and PG pipes as well as Quick-Pipe electrical installation pipes. Flexible clamping range of several millimeters. Universal fastening options on walls and ceilings and can be used in profile rails indoors and in protected outdoor areas. Tool-free pipe installation. Can also be arranged in series with OBO Quick or starQuick clamps.
Sales unit: 50 pieces
Lieske Part No.: 791483

Surface-mounted clamp for holding metric and PG pipes as well as Quick-Pipe electrical installation pipes. Flexible clamping range of several millimeters. Universal fastening options on walls and ceilings and can be used in profile rails indoors and in protected outdoor areas. Tool-free pipe installation. Can also be arranged in series with OBO Quick or starQuick clamps.
Sales unit: 25 pieces
Lieske Part No.: 467875

Scissors for burr-free cutting of Quick-Pipe electrical installation pipes Ø 16 - 32 mm.
Lieske Part No.: 898484

Multi-Quick (R) clamps
- Metric
- Easy mounting
- Secure catching
- Radial arrangement
- Simplified storage
- Clamping ranges from 16-32 mm
- Universal use
- Mounting rails in 2060 OBO Type
and 2061

M-Quick ME 16/20 = PG11 / Pg 13,5 / M16 / M20
M-Quick ME 20/25 = 13.5 Pg / Pg 16 M20 / M25
M-Quick ME 25/32 = PG21 / M25 / M32

Light gray
Clamping range: 16-20 mm

Type: M-ME QUICK
Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 326175

Multi-Quick (R) clamps - Metric - simple attachment - secure engagement - Radial arrangement - Simplified storage - Clamping ranges from
6-32 mm - universally - attachment in rails OBO Type 2 6 and 2 6
M-Quick ME
6/2 = Pg / Pg 3.5 / M 6 / M 2 M-Quick ME 2/25 = Pg 3.5 / Pg 6 M2 / M25 M-Quick ME 25/32 = Pg2 / M25 / M32 light gray Clamping range: 2 -25 mm Type: M-QUICK ME2 item:







ST.
Sales unit: 50 pieces
Lieske Part No.: 102020

Surface-mounted clamp for holding metric pipes and Quick-Pipe electrical installation pipes. Flexible clamping range of several millimeters. Universal fastening options on walls and ceilings, indoors and outdoors. Tool-free pipe installation. Can also be arranged in series with OBO Quick or starQuick clamps.
Sales unit: 50 pieces
Lieske Part No.: 697523

OBO Quick (R)-The channel pipe with cap is a further development of the quick channel. The fact that he has a lockable lid, all it takes advantage of the quick channel with the advantages of the closed pipe installation. He is forced to open from the top of the clamp. Then you can insert the cable through the open lid. By turning the channel in the bracket, the lid will automatically close. This excludes that cable may protrude from the channel. Diameter:
6, 2, 25 and 32 mm Standard length: 2 m Material: polyvinyl chloride, hinge component of soft, light gray RAL 7 35 Version: 3 m Quick Pipe Type: 2953/M25 item: 3 MTR
Sales unit: 2 meters
Lieske Part No.: 955887

OBO Quick (R)-The channel pipe with cap is a further development of the quick channel. The fact that he has a lockable lid, all it takes advantage of the quick channel with the advantages of the closed pipe installation. He is forced to open from the top of the clamp. Then you can insert the cable through the open lid. By turning the channel in the bracket, the lid will automatically close. This excludes that cable may protrude from the channel. Diameter:
6, 2, 25 and 32 mm Standard length: 2 m Material: polyvinyl chloride, hinge component of soft, light gray RAL 7 35 Version: 2 m Quick Pipe Type: 2953/M32 item: 2 MTR
Sales unit: 20 meters
Lieske Part No.: 931880

Open Quick-Pipe pipe made of plastic for surface-mounted installation of cables and lines indoors and in protected outdoor areas. Installation on walls and ceilings with Quick clamp, Star-Quick clamp and Multi-Quick clamp. Can be closed and opened without tools by turning the clamp. Can be used in a temperature range from - 25° to + 60° C.
Sales unit: 50 meters
Lieske Part No.: 374865

Open Quick-Pipe pipe made of plastic for surface-mounted installation of cables and lines indoors and in protected outdoor areas. Installation on walls and ceilings with Quick clamp, Star-Quick clamp and Multi-Quick clamp. Can be closed and opened without tools by turning the clamp. Can be used in a temperature range from - 25° to + 60° C.
Sales unit: 40 meters
Lieske Part No.: 437147

Open Quick-Pipe pipe made of plastic for surface-mounted installation of cables and lines indoors and in protected outdoor areas. Installation on walls and ceilings with Quick clamp, Star-Quick clamp and Multi-Quick clamp. Can be closed and opened without tools by turning the clamp. Can be used in a temperature range from - 25° to + 60° C.
Sales unit: 30 meters
Lieske Part No.: 854198

Open Quick-Pipe pipe made of plastic for surface-mounted installation of cables and lines indoors and in protected outdoor areas. Installation on walls and ceilings with Quick clamp, Star-Quick clamp and Multi-Quick clamp. Can be closed and opened without tools by turning the clamp. Can be used in a temperature range from - 25° to + 60° C.
Sales unit: 20 meters
Lieske Part No.: 695803

Set of Quick-Pipe electrical installation pipes and Quick-Clamp surface-mounted clamps. For surface-mounted installation of cables and lines indoors and in protected outdoor areas. Universal fastening to walls and ceilings. Includes 50 m of pipe, each 2 meters long, and 156 Quick clamps. Can be used in a temperature range from - 25° to + 60° C.
Lieske Part No.: 468921

Set of Quick-Pipe electrical installation pipes and Quick-Clamp surface-mounted clamps. For surface-mounted installation of cables and lines indoors and in protected outdoor areas. Universal fastening to walls and ceilings. Includes 40 m of pipe, each 2 meters long, and 120 Quick clamps. Can be used in a temperature range from - 25° to + 60° C.
Lieske Part No.: 617018

Set of Quick-Pipe electrical installation pipes and Quick-Clamp surface-mounted clamps. For surface-mounted installation of cables and lines indoors and in protected outdoor areas. Universal fastening to walls and ceilings. Includes 30 m of pipe, each 2 meters long, and 96 Quick clamps. Can be used in a temperature range from - 25° to + 60° C.
Lieske Part No.: 747616

Set of Quick-Pipe electrical installation pipes and Quick-Clamp surface-mounted clamps. For surface-mounted installation of cables and lines indoors and in protected outdoor areas. Universal fastening to walls and ceilings. Includes 20 m of pipe, each 2 meters long, and 60 Quick clamps. Can be used in a temperature range from - 25° to + 60° C.
Lieske Part No.: 895073

Blitz-Iso clamps: Plastic clamp with metal insert, therefore also suitable for heavy-duty use, metal parts made of steel, galvanized.
3015 with elongated hole 4.5 mm.
*Sizes 6-12 and 10-17 not suitable for bolt setting tools.
Sales unit: 50 pieces
Lieske Part No.: 974384

Blitz-Iso clamps: Plastic clamp with metal insert, therefore also suitable for heavy-duty use, metal parts made of steel, galvanized.
3015 with elongated hole 4.5 mm.
*Sizes 6-12 and 10-17 not suitable for bolt setting tools.
Sales unit: 50 pieces
Lieske Part No.: 832425

Blitz-Iso clamps: Plastic clamp with metal insert, therefore also suitable for heavy-duty use, metal parts made of steel, galvanized.
3015 with elongated hole 4.5 mm.
*Sizes 6-12 and 10-17 not suitable for bolt setting tools.
Sales unit: 50 pieces
Lieske Part No.: 312519

Blitz-Iso clamps: Plastic clamp with metal insert, therefore also suitable for heavy-duty use, metal parts made of steel, galvanized.
3015 with elongated hole 4.5 mm.
*Sizes 6-12 and 10-17 not suitable for bolt setting tools.
Sales unit: 25 pieces
Lieske Part No.: 493547

Blitz-Iso clamps: Plastic clamp with metal insert, therefore also suitable for heavy-duty use, metal parts made of steel, galvanized.
Can be screwed onto M6 thread.
*Sizes 6-12 and 10-17 not suitable for bolt setting tools.
Sales unit: 50 pieces
Lieske Part No.: 318802

Blitz-Iso clamps: Plastic clamp with metal insert, therefore also suitable for heavy-duty use, metal parts made of steel, galvanized.
Can be screwed onto M6 thread.
*Sizes 6-12 and 10-17 not suitable for bolt setting tools.
Sales unit: 50 pieces
Lieske Part No.: 519994

Blitz-Iso clamps: Plastic clamp with metal insert, therefore also suitable for heavy-duty use, metal parts made of steel, galvanized.
Can be screwed onto M6 thread.
*Sizes 6-12 and 10-17 not suitable for bolt setting tools.
Sales unit: 25 pieces
Lieske Part No.: 614368

Blitz-Iso clamps: Plastic clamp with metal insert, therefore also suitable for heavy-duty use, metal parts made of steel, galvanized.
Can be screwed onto M6 thread.
*Sizes 6-12 and 10-17 not suitable for bolt setting tools.
Sales unit: 25 pieces
Lieske Part No.: 1426036

Easy-fit clip
The plug clamps are used when installing
Cables and pipes on walls and ceilings and
installation of flexible pipes on concrete
and in the floor.


Simply plug the clamps instead of nail clips in concrete and aerated concrete.
The advantage of the push-fit clips is that they are only in the borehole
must be inserted. It eliminates the use of anchors and
Screws.
Drill diameter: 6 mm
Hole depth: 35 or 40 mm
Material: polyamide PA 6, light gray RAL 7035
Clamping range: 16-23 mm

Type: 1974/23
Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 240285

The clip clamps are used for laying cables and pipes on walls and ceilings and for laying flexible pipes on concrete and in screed. The single clip clamps replace nail clips in concrete and aerated concrete. The advantage of the clip clamps is that they only have to be inserted into the drill hole. There is no need to use dowels and screws.
Sales unit: 100 pieces
Lieske Part No.: 677856

The double-fit clip-on clips are used for laying cables and pipes on walls and ceiling and the installation of flexible pipes on concrete and screed. The double push-fit clips instead of nail clips in concrete and aerated concrete. The advantage of the push-fit clips is that they have to be pushed into the wellbore. It eliminates the use of screws and plugs. Drill diameter: 6 mm Hole Depth: 35 mm and 4 mm Material: PA 6 polyamide, light gray RAL 7 35 Clamping range: 4 -
2 mm Type:
974/2X
2 Quantity:
ST.
Sales unit: 100 pieces
Lieske Part No.: 868174

The double-fit clip-on clips are used for laying cables and pipes on walls and ceiling and the installation of flexible pipes on concrete and screed. The double push-fit clips instead of nail clips in concrete and aerated concrete. The advantage of the push-fit clips is that they have to be pushed into the wellbore. It eliminates the use of screws and plugs. Drill diameter: 6 mm Hole Depth: 35 mm and 4 mm Material: PA 6 polyamide, light gray RAL 7 35 Clamping range:
2-25 mm Type:
974/2X25 item:
ST.
Sales unit: 100 pieces
Lieske Part No.: 866564

Cable clamp metal
Excellent eeigent for use in suspended ceilings because:
- High heat resistance
- No problems with halogens in case of fire
- No fire load
- Terminal height 10 mm
- Mounting hole Ø 6 mm
Version: for max. 16 conductors NYM 3 x 1.5 mm ²

Type: 2033M
Quantity: 1 unit.
Sales unit: 25 pieces
Lieske Part No.: 191336

The metal cable clamp is halogen-free and fire-load-free and offers high mechanical stability even in the event of a fire. The cable clamp is approved as a cable-specific variant for electrical functional integrity in accordance with DIN 4102 Part 12. The spacer 2033 D 15 x 3 G (order separately) increases the clamping height of cable clamps from 10 to 13 mm. The cable clamp is suitable for fire-safe installation above suspended fire protection ceilings in accordance with DIN 4102.
Sales unit: 50 pieces
Lieske Part No.: 212428

The metal cable clamp is halogen-free and fire-load-free and offers high mechanical stability even in the event of a fire. The cable clamp is approved as a cable-specific variant for electrical functional integrity in accordance with DIN 4102 Part 12. The spacer 2033 D 15 x 3 G (order separately) increases the clamping height of cable clamps from 10 to 13 mm. The cable clamp is suitable for fire-safe installation above suspended fire protection ceilings in accordance with DIN 4102.
Sales unit: 50 pieces
Lieske Part No.: 104704

With molded plug dowel 6 mm Ø.
Sales unit: 25 pieces
Lieske Part No.: 390350

OBO cable clips 2 32 for max. 8 conductors NYM 3 x
, 5 2 33 mm ² for max.
6 conductors NYM 3 x
, 5 2 34 mm ² for max. 8 conductors NYM 3 x
, 5 mm ² 2 to 2 32/SD 34/SD with pre-shock OBO plug 6 mm, required hole depth 5 mm Type: 2 32SD
25MM Quantity:
ST.
Sales unit: 50 pieces
Lieske Part No.: 808090

OBO cable clamps
2032 for max. 8 conductors NYM 3 x 1.5 mm ²
2033 max. 16 conductors NYM 3 x 1.5 mm ²
2034 for max. 8 conductors NYM 3 x 1.5 mm ²
2032/SD to 2034/SD
with pre-shock OBO plug 6 mm, required
Hole depth 50 mm

Type: 2033SD 220MM
Quantity: 1 unit.
Sales unit: 25 pieces
Lieske Part No.: 595608

With pre-assembled impact dowel 6 mm Ø.
Required drill hole depth 50 mm.
Clamping height 9 mm, with spacer 13 mm.
Mounting hole 6 mm Ø.
Sales unit: 100 pieces
Lieske Part No.: 951873

With pre-assembled impact dowel 6 mm Ø.
Required drill hole depth 50 mm.
Clamping height 9 mm, with spacer 13 mm.
Mounting hole 6 mm Ø.
Sales unit: 100 pieces
Lieske Part No.: 234083