Installation Material from OBO Bettermann

Hardened steel, galvanized and coated with hostaflon. Countersunk head with Phillips (Pozidrive size 2 except Ø 6 mm Pozidrive size 3).
Using SPRINT screws results in significantly shorter screwing times
compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 342267

Hardened steel, galvanized and coated with hostaflon. Countersunk head with Phillips (Pozidrive size 2 except Ø 6 mm Pozidrive size 3).
Using SPRINT screws results in significantly shorter screwing times
compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 324190

Hardened steel, galvanized and coated with hostaflon. Countersunk head with Phillips (Pozidrive size 2 except Ø 6 mm Pozidrive size 3).
Using SPRINT screws results in significantly shorter screwing times
compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 854435

Hardened steel, galvanized and coated with hostaflon. Countersunk head with Phillips (Pozidrive size 2 except Ø 6 mm Pozidrive size 3).
Using SPRINT screws results in significantly shorter screwing times
compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 273159

Hardened steel, galvanized and coated with hostaflon. Countersunk head with Phillips (Pozidrive size 2 except Ø 6 mm Pozidrive size 3).
Using SPRINT screws results in significantly shorter screwing times
compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 822573

Hardened steel, galvanized and coated with hostaflon. Countersunk head with Phillips (Pozidrive size 2 except Ø 6 mm Pozidrive size 3).
Using SPRINT screws results in significantly shorter screwing times
compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 871917

Hardened steel, galvanized and coated with hostaflon. Countersunk head with Phillips (Pozidrive size 2 except Ø 6 mm Pozidrive size 3).
Using SPRINT screws results in significantly shorter screwing times
compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 717396

Hardened steel, galvanized and coated with hostaflon. Countersunk head with Phillips (Pozidrive size 2 except Ø 6 mm Pozidrive size 3).
Using SPRINT screws results in significantly shorter screwing times
compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 170240

Hardened steel, galvanized and hostaflon coated. Panhead with combined Phillips and screwdriver slot (Pozidrive size 2 except Ø 6 mm Pozidrive size 3).
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 268374

Golden Sprint screw 4758
zinc plated and yellow passivated, and
hardened, Hostaflon. Another
Plus: the Panhead with combined Philips and
Screwdriver
(Pozidriv size. 2, 6.0 mm Pozidriv size. 3)
3.5 mm Ø
Length: 20 mm

Type: 4758/3, 5X20
Sales Unit: 200 ST.
Sales unit: 200 pieces
Lieske Part No.: 212474

Golden Sprint screw 4758
zinc plated and yellow passivated, and
hardened, Hostaflon. Another
Plus: the Panhead with combined Philips and
Screwdriver
(Pozidriv size. 2, 6.0 mm Pozidriv size. 3)
3.5 mm Ø
Length: 25 mm

Type: X25 4758 3.5
Sales Unit: 200 ST.
Sales unit: 200 pieces
Lieske Part No.: 211182

Golden Sprint screw 4758
zinc plated and yellow passivated, and
hardened, Hostaflon. Another
Plus: the Panhead with combined Philips and
Screwdriver
(Pozidriv size. 2, 6.0 mm Pozidriv size. 3)
3.5 mm Ø
Length: 30 mm

Type: X30 4758 3.5
Sales Unit: 200 ST.
Sales unit: 200 pieces
Lieske Part No.: 263101

Golden Sprint screw 4758
zinc plated and yellow passivated, and
hardened, Hostaflon. Another
Plus: the Panhead with combined Philips and
Screwdriver
(Pozidriv size. 2, 6.0 mm Pozidriv size. 3)
Ø 3.5 mm
Length: 35 mm Type: X35 4758 3.5


Sales Unit: 200 ST.
Sales unit: 200 pieces
Lieske Part No.: 150739

4758 Golden Sprint screw, zinc plated and yellow passivated, and hardened, Hostaflon. Another plus: the Panhead with combined Philips and slotted (.. Pozidriv size 2, Ø 6 mm Pozidriv 3) 3.5 mm Ø Length: 4 mm Type: 4758/3, 5X4 item: 2 ST.
Sales unit: 200 pieces
Lieske Part No.: 795138

Hardened steel, galvanized and hostaflon coated. Panhead with combined Phillips and screwdriver slot (Pozidrive size 2 except Ø 6 mm Pozidrive size 3).
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 706539

Hardened steel, galvanized and hostaflon coated. Panhead with combined Phillips and screwdriver slot (Pozidrive size 2 except Ø 6 mm Pozidrive size 3).
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 290866

Golden Sprint screw 4758
zinc plated and yellow passivated, and
hardened, Hostaflon. Another
Plus: the Panhead with combined Philips and
Screwdriver
(Pozidriv size. 2, 6.0 mm Pozidriv size. 3)
Ø 4.0 mm
Length: 15 mm Type: 4758/4X15


Sales Unit: 200 ST.
Sales unit: 200 pieces
Lieske Part No.: 676106

Golden Sprint screw 4758
zinc plated and yellow passivated, and
hardened, Hostaflon. Another
Plus: the Panhead with combined Philips and
Screwdriver
(Pozidriv size. 2, 6.0 mm Pozidriv size. 3)
Ø 4.0 mm
Length: 20 mm Type: 4758/4X20


Sales Unit: 200 ST.
Sales unit: 200 pieces
Lieske Part No.: 627506

4758 Golden Sprint screw, zinc plated and yellow passivated, and hardened, Hostaflon. Another plus: the Panhead with combined Philips and slotted (Pozidriv size 2, Ø 6 mm Pozidriv third.) 4 mm Ø Length: 25 mm Type: 4758 4X25 item: 2 ST.
Sales unit: 200 pieces
Lieske Part No.: 771210

Golden Sprint screw 4758
zinc plated and yellow passivated, and
hardened, Hostaflon. Another
Plus: the Panhead with combined Philips and
Screwdriver
(.. Pozidriv size 2, 6.0 mm Pozidriv 3)
Ø 4.0 mm
Length: 30 mm Type: 4758 4X30


Sales Unit: 200 ST.
Sales unit: 200 pieces
Lieske Part No.: 605174

4758 Golden Sprint screw, zinc plated and yellow passivated, and hardened, Hostaflon. Another plus: the Panhead with combined Philips and slotted (Pozidriv size 2, Ø 6 mm Pozidriv third.) 4 mm Ø Length: 35 mm Type: 4758 4X35 item: 2 ST.
Sales unit: 200 pieces
Lieske Part No.: 745554

4758 Golden Sprint screw, zinc plated and yellow passivated, and hardened, Hostaflon. Another plus: the Panhead with combined Philips and slotted (Pozidriv size 2, Ø 6 mm Pozidriv third.) 4 mm Ø Length: 4 mm Type: 4758 4X4 item: 2 ST.
Sales unit: 200 pieces
Lieske Part No.: 721933

4758 Golden Sprint screw, zinc plated and yellow passivated, and hardened, Hostaflon. Another plus: the Panhead with combined Philips and slotted (Pozidriv size 2, Ø 6 mm Pozidriv third.) 4 mm Ø Length: 45 mm Type: 4758/4X45 item: 2 ST.
Sales unit: 200 pieces
Lieske Part No.: 874823

4758 Golden Sprint screw, zinc plated and yellow passivated, and hardened, Hostaflon. Another plus: the Panhead with combined Philips and slotted (Pozidriv size 2, Ø 6 mm Pozidriv third.) 4 mm Ø Length: 5 mm Type: 4758 4X5 item: 2 ST.
Sales unit: 200 pieces
Lieske Part No.: 713156

4758 Golden Sprint screw, zinc plated and yellow passivated, and hardened, Hostaflon. Another plus: the Panhead with combined Philips and slotted (Pozidriv size 2, Ø 6 mm Pozidriv third.) Ø 4.5 mm Length: 25 mm Type: X25 4758 4.5 item: 2 ST.
Sales unit: 200 pieces
Lieske Part No.: 720750

Golden Sprint screw 4758
zinc plated and yellow passivated, and
hardened, Hostaflon. Another
Plus: the Panhead with combined Philips and
Screwdriver
(Pozidriv size. 2, 6.0 mm Pozidriv size. 3)
4.5 mm Ø
Length: 30 mm

Type: X30 4758 4.5
Sales Unit: 200 ST.
Sales unit: 200 pieces
Lieske Part No.: 131734

Golden Sprint screw 4758
zinc plated and yellow passivated, and
hardened, Hostaflon. Another
Plus: the Panhead with combined Philips and
Screwdriver
(Pozidriv size. 2, 6.0 mm Pozidriv size. 3)
4.5 mm Ø
Length: 35 mm

Type: X35 4758 4.5
Sales Unit: 200 ST.
Sales unit: 200 pieces
Lieske Part No.: 227819

4758 Golden Sprint screw, zinc plated and yellow passivated, and hardened, Hostaflon. Another plus: the Panhead with combined Philips and slotted (Pozidriv size 2, Ø 6 mm Pozidriv third.) Ø 4.5 mm Length: 4 mm Type: X4 4758 4.5 item: 2 ST.
Sales unit: 200 pieces
Lieske Part No.: 889948

Golden Sprint screw 4758
zinc plated and yellow passivated, and
hardened, Hostaflon. Another
Plus: the Panhead with combined Philips and
Screwdriver
(Pozidriv size. 2, 6.0 mm Pozidriv size. 3)
4.5 mm Ø
Length: 45 mm

Type: X45 4758 4.5
Sales Unit: 200 ST.
Sales unit: 200 pieces
Lieske Part No.: 239924

Golden Sprint screw 4758
zinc plated and yellow passivated, and
hardened, Hostaflon. Another
Plus: the Panhead with combined Philips and
Screwdriver
(Pozidriv size. 2, 6.0 mm Pozidriv size. 3)
Ø 4.5 mm
Length: 50 mm Type: X50 4758 4.5


Sales Unit: 200 ST.
Sales unit: 200 pieces
Lieske Part No.: 618404

4758 Golden Sprint screw, zinc plated and yellow passivated, and hardened, Hostaflon. Another plus: the Panhead with combined Philips and slotted (Pozidriv size 2, Ø 6 mm Pozidriv third.) 5 mm Ø Length: 3 mm Type: 4758 5X3 item: 2 ST.
Sales unit: 200 pieces
Lieske Part No.: 885247

4758 Golden Sprint screw, zinc plated and yellow passivated, and hardened, Hostaflon. Another plus: the Panhead with combined Philips and slotted (Pozidriv size 2, Ø 6 mm Pozidriv third.) Ø 5 mm Length: 35 mm Type: 5X35 4758 item 2 ST.
Sales unit: 200 pieces
Lieske Part No.: 815369

4758 Golden Sprint screw, zinc plated and yellow passivated, and hardened, Hostaflon. Another plus: the Panhead with combined Philips and slotted (Pozidriv size 2, Ø 6 mm Pozidriv third.) 5 mm Ø Length: 4 mm Type: 4758 5X4 item: 2 ST.
Sales unit: 200 pieces
Lieske Part No.: 855884

Hardened steel, galvanized and hostaflon coated. Panhead with combined Phillips and screwdriver slot (Pozidrive size 2 except Ø 6 mm Pozidrive size 3).
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 594421

Golden Sprint screw 4758
zinc plated and yellow passivated, and
hardened, Hostaflon. Another
Plus: the Panhead with combined Philips and
Screwdriver
(Pozidriv size. 2, 6.0 mm Pozidriv size. 3)
Ø 5.0 mm
Length: 50 mm Type: 4758 5X50


Sales Unit: 200 ST.
Sales unit: 200 pieces
Lieske Part No.: 684765

Hardened steel, galvanized and hostaflon coated. Panhead with combined Phillips and screwdriver slot (Pozidrive size 2 except Ø 6 mm Pozidrive size 3).
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 417196

Hardened steel, galvanized and hostaflon coated. Panhead with combined Phillips and screwdriver slot (Pozidrive size 2 except Ø 6 mm Pozidrive size 3).
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 220568

Hardened steel, galvanized and hostaflon coated. Panhead with combined Phillips and screwdriver slot (Pozidrive size 2 except Ø 6 mm Pozidrive size 3).
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 348010

Golden Sprint screw 4758
zinc plated and yellow passivated, and
hardened, Hostaflon. Another
Plus: the Panhead with combined Philips and
Screwdriver
(Pozidriv size. 2, 6.0 mm Pozidriv size. 3)
6.0 mm Ø
: 6,0 x 50 mm

Type: 4758/6X50
Sales Unit: 200 ST.
Sales unit: 200 pieces
Lieske Part No.: 561418

Hardened steel, galvanized and hostaflon coated. Panhead with combined Phillips and screwdriver slot (Pozidrive size 2 except Ø 6 mm Pozidrive size 3).
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 578411

Hardened steel, galvanized and hostaflon coated. Panhead with T-bit (hexalobular socket), sizes Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 937048

Hardened steel, galvanized and hostaflon coated. Panhead with T-bit (hexalobular socket), sizes Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 662369

Hardened steel, galvanized and hostaflon coated. Panhead with T-bit (hexalobular socket), sizes Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 1426034

Hardened steel, galvanized and hostaflon coated. Panhead with T-bit (hexalobular socket), sizes Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 972219

Hardened steel, galvanized and hostaflon coated. Panhead with T-bit (hexalobular socket), sizes Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 225171

Hardened steel, galvanized and hostaflon coated. Panhead with T-bit (hexalobular socket), sizes Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 617994

Hardened steel, galvanized and hostaflon coated. Panhead with T-bit (hexalobular socket), sizes Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 285698

Hardened steel, galvanized and hostaflon coated. Panhead with T-bit (hexalobular socket), sizes Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 639576

Hardened steel, galvanized and hostaflon coated. Panhead with T-bit (hexalobular socket), sizes Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 686739

Hardened steel, galvanized and hostaflon coated. Panhead with T-bit (hexalobular socket), sizes Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25.
Using SPRINT screws results in significantly shorter screwing times compared to conventional screws. This noticeable advantage is achieved by the gripping tip with the 1st gear, which leads to the 2-start thread.
Areas of application: wood, chipboard, plasterboard, plastic dowels.
Sales unit: 200 pieces
Lieske Part No.: 162686