Installation Material from OBO Bettermann

Can be screwed onto M10 thread. Size 27 FT is suitable for M25. Size 48.5 FT is suitable for M50. Size 60 FT is suitable for M63.
Sales unit: 25 pieces
Lieske Part No.: 1315347

Can be screwed onto M10 thread. Size 27 FT is suitable for M25. Size 48.5 FT is suitable for M50. Size 60 FT is suitable for M63.
Sales unit: 15 pieces
Lieske Part No.: 285501

For attaching cables to tensioning cables. With screw M4x13.
Sales unit: 50 pieces
Lieske Part No.: 233297

Tension wire clamp for rope 4-9mm 11-16mm. With V4A screw M4x14.
Sales unit: 50 pieces
Lieske Part No.: 222201

For attaching cables to tensioning cables. With screw M4x13.
Sales unit: 50 pieces
Lieske Part No.: 197788

Tension wire clamp for rope 4-9mm 14-18mm. With V4A screw M4x14.
Sales unit: 50 pieces
Lieske Part No.: 889760

For attaching cables to tensioning cables. With screw M4x13.
Sales unit: 50 pieces
Lieske Part No.: 945056

Tension wire clamp for rope 4-9mm 19-28mm. With V4A screw M4x14.
Sales unit: 50 pieces
Lieske Part No.: 854052

Rust-proof coated support clamp, screwless, with locking spring, suitable for profile rails type CML3518 and CMS3518. For quick attachment to steel profiles when installing cable trays, U-clamps, light suspensions, etc. A complete system consists of 2 support clamps and a piece of C-profile rail of any length, as well as 2 protective caps.
Sales unit: 50 pieces
Lieske Part No.: 574832

Rust-proof coated support clamp, screwless, with locking spring, suitable for profile rails type CML3518 and CMS3518. For quick attachment to steel profiles when installing cable trays, U-clamps, light suspensions, etc. A complete system consists of 2 support clamps and a piece of C-profile rail of any length, as well as 2 protective caps.
Sales unit: 50 pieces
Lieske Part No.: 521994

For quick attachment to steel profiles when installing cable trays, U-clamps, light suspensions, etc. A complete system consists of
2 support clamps and a piece of C-profile rail of any length, as well as 2 protective caps.
Sales unit: 5 pieces
Lieske Part No.: 123175

Zugentlastungsschelle 5mm
Sales unit: 100 pieces
Lieske Part No.: 208856

Strain relief clamp 6.5mm
Sales unit: 100 pieces
Lieske Part No.: 332669

Strain relief clamp 6.5mm
Sales unit: 100 pieces
Lieske Part No.: 604135

Strain relief clamp 8mm
Sales unit: 100 pieces
Lieske Part No.: 939080

Strain relief clamp 6mm
Sales unit: 100 pieces
Lieske Part No.: 600717

Strain relief clamp 8mm
Sales unit: 100 pieces
Lieske Part No.: 682738

Type: 7903 9 G
Sales unit: 100 pc
Sales unit: 100 pieces
Lieske Part No.: 327083

Strain relief clamp 6mm
Sales unit: 100 pieces
Lieske Part No.: 126515

Strain relief clamp 5mm
Sales unit: 100 pieces
Lieske Part No.: 633258

Strain relief clamp 6mm
Sales unit: 100 pieces
Lieske Part No.: 238636

In rings.
Sales unit: 200 meters
Lieske Part No.: 1321421

Perforated mounting tape with PE plastic coating, in a roll-off box.
Lieske Part No.: 2069871

Perforated mounting tape with PE plastic coating, in a roll-off box.
Lieske Part No.: 2069872

Perforated mounting tape with PE plastic coating, in a roll-off box.
Lieske Part No.: 2069873

Perforated mounting tape in corrugated form, for mounting pipes on walls and ceilings, for example. In a roll-off container.
Lieske Part No.: 2069874

Perforated mounting tape in corrugated form, for mounting pipes on walls and ceilings, for example. In a roll-off container.
Lieske Part No.: 2069875

Perforated mounting tape in corrugated form, for mounting pipes on walls and ceilings, for example. In a roll-off container.
Lieske Part No.: 2069876

Perforated mounting tape in corrugated form, for mounting pipes on walls and ceilings, for example. In a roll-off container.
Lieske Part No.: 2069877

With through hole.
Max. tightening torque: 8 Nm
Sales unit: 50 pieces
Lieske Part No.: 789822

With thread.
Max. tightening torque: 8 Nm
Sales unit: 50 pieces
Lieske Part No.: 734879

With thread.
Max. tightening torque: 18 Nm
Lieske Part No.: 140893

With thread.
Max. tightening torque: 21 Nm
Sales unit: 25 pieces
Lieske Part No.: 795616

Two-joint beam clamp for fastening to beams without welding or drilling. The maximum load depends on the direction of the load.
Sales unit: 10 pieces
Lieske Part No.: 978016

For suspending light supports or other components.
Sales unit: 25 meters
Lieske Part No.: 265330

Connecting hooks for support clamps and suspension chains.
Sales unit: 100 pieces
Lieske Part No.: 868176

Trägerklammer mit Bohrung für individuelle Montagelösungen, z. B. für die Aufnahme von S-Haken oder Ketten. Befestigung an Stahträgern durch Aufschlagen.
Sales unit: 100 pieces
Lieske Part No.: 840372

Beam clamp with hole for individual mounting solutions, e.g. for holding S-hooks or chains. Fastened to steel beams by hammering.
Sales unit: 100 pieces
Lieske Part No.: 1062707

Beam clamp with hole for individual mounting solutions, e.g. for holding S-hooks or chains. Fastened to steel beams by hammering.
Sales unit: 100 pieces
Lieske Part No.: 2135539

Beam clamp with M6 threaded bolt on the side for individual mounting solutions. Fastened to steel beams by hammering.
Sales unit: 100 pieces
Lieske Part No.: 681956

Trägerklammer mit Gewindebolzen M6 seitlich für individuelle Montagelösungen. Befestigung an Stahträgern durch Aufschlagen.
Sales unit: 100 pieces
Lieske Part No.: 641908

Trägerklammer mit Gewindebolzen M6 seitlich für individuelle Montagelösungen. Befestigung an Stahträgern durch Aufschlagen.
Sales unit: 100 pieces
Lieske Part No.: 641981

Beam clamp with M6 internal thread for individual mounting solutions. Fastened to steel beams by hammering.
Sales unit: 100 pieces
Lieske Part No.: 1103513

Beam clamp with M6 internal thread for individual mounting solutions. Fastened to steel beams by hammering.
Sales unit: 100 pieces
Lieske Part No.: 1103514

Beam clamp with M6 internal thread for individual mounting solutions. Fastened to steel beams by hammering.
Sales unit: 100 pieces
Lieske Part No.: 2135540

Beam clamp with M6 threaded bolt at the bottom for individual mounting solutions. Fastened to steel beams by hammering.
Sales unit: 100 pieces
Lieske Part No.: 1103515

Beam clamp with M6 threaded bolt at the bottom for individual mounting solutions. Fastened to steel beams by hammering.
Sales unit: 100 pieces
Lieske Part No.: 1103516

Trägerklammer für Kabelbinder zum Montieren von Kabeln und Rohren. Befestigung an Stahträgern durch Aufschlagen. Kabelbinder nicht im Lieferumfang enthalten.
Sales unit: 50 pieces
Lieske Part No.: 840373

Trägerklammer für Kabelbinder zum Montieren von Kabeln und Rohren. Befestigung an Stahträgern durch Aufschlagen. Kabelbinder nicht im Lieferumfang enthalten.
Sales unit: 50 pieces
Lieske Part No.: 873208

Trägerklammer zum Montieren von Rohren. Geschlossene Rohraufnahme seitlich. Befestigung an Stahträgern durch Aufschlagen.
Sales unit: 50 pieces
Lieske Part No.: 840350