Installation Material from OBO Bettermann

Areas of application: solid brick, concrete, wood. Excellent for areas exposed to high temperatures.
Sales unit: 100 pieces
Lieske Part No.: 335869

For attaching components to plasterboard or fiber composite panels.
Minimum panel thickness: 12 mm
for Ø 4.5 mm Golden Sprint or Sprint screws.
Sales unit: 100 pieces
Lieske Part No.: 756514

For attaching components to plasterboard or fiber composite panels.
Min. panel thickness: 5 mm
Sales unit: 100 pieces
Lieske Part No.: 195764

Areas of application: aerated concrete, lightweight concrete, Poroton, pumice, gypsum, perforated bricks and solid bricks. Can be driven into low-strength aerated concrete (aerated concrete) without drilling. Excellent for areas exposed to high temperatures.
Sales unit: 200 pieces
Lieske Part No.: 760252

Areas of application: aerated concrete, lightweight concrete, Poroton, pumice, gypsum, perforated bricks and solid bricks. Can be driven into low-strength aerated concrete (aerated concrete) without drilling. Excellent for areas exposed to high temperatures.
Sales unit: 100 pieces
Lieske Part No.: 953525

Einschlaganker zur Einzelbefestigung von nichttragenden Systemen in ungerissenem Beton und zur Mehrfachbefestigung in gerissenem und ungerissenem Beton.
Brandschutztechnisch geprüft, Feuerwiderstandsklasse R 120 gemäß Europäisch Technischer Zulassung ETA-02/0020 (Opt. 7) und Europäisch Technischer Zulassung ETA-05/0116.
Montage mit Markier- und Spreizwerkzeug. Verkaufseinheit: 50 ST.
Sales unit: 50 pieces
Lieske Part No.: 639028

Drop-in anchor for single fastening of non-load-bearing systems in non-cracked concrete and for multiple fastening in cracked and non-cracked concrete.
Fire protection tested, fire resistance class R 120 according to European Technical Approval ETA-02/0020 (Opt. 7) and European Technical Approval ETA-05/0116.
Installation with marking and spreading tool.
Sales unit: 50 pieces
Lieske Part No.: 469534

Drop-in anchor for single fastening of non-load-bearing systems in non-cracked concrete and for multiple fastening in cracked and non-cracked concrete.
Fire protection tested, fire resistance class R 120 according to European Technical Approval ETA-02/0020 (Opt. 7) and European Technical Approval ETA-05/0116.
Installation with marking and spreading tool.
Sales unit: 100 pieces
Lieske Part No.: 1055064

Drop-in anchor for single fastening of non-load-bearing systems in non-cracked concrete and for multiple fastening in cracked and non-cracked concrete.
Fire protection tested, fire resistance class R 120 according to European Technical Approval ETA-02/0020 (Opt. 7) and European Technical Approval ETA-05/0116.
Installation with marking and spreading tool.
Sales unit: 100 pieces
Lieske Part No.: 469536

Drop-in anchor for single fastening of non-load-bearing systems in non-cracked concrete and for multiple fastening in cracked and non-cracked concrete.
Fire protection tested, fire resistance class R 120 according to European Technical Approval ETA-02/0020 (Opt. 7) and European Technical Approval ETA-05/0116.
Installation with marking and spreading tool.
Sales unit: 50 pieces
Lieske Part No.: 469540

Drop-in anchor for single fastening of non-load-bearing systems in non-cracked concrete and for multiple fastening in cracked and non-cracked concrete.
Fire protection tested, fire resistance class R 120 according to European Technical Approval ETA-02/0020 (Opt. 7) and European Technical Approval ETA-05/0116.
Installation with marking and spreading tool.
Sales unit: 100 pieces
Lieske Part No.: 1055065

Drop-in anchor for single fastening of non-load-bearing systems in non-cracked concrete and for multiple fastening in cracked and non-cracked concrete.
Fire protection tested, fire resistance class R 120 according to European Technical Approval ETA-02/0020 (Opt. 7) and European Technical Approval ETA-05/0116.
Installation with marking and spreading tool.
Sales unit: 50 pieces
Lieske Part No.: 1055066

Drop-in anchor for single fastening of non-load-bearing systems in non-cracked concrete and for multiple fastening in cracked and non-cracked concrete.
Fire protection tested, fire resistance class R 120 according to European Technical Approval ETA-02/0020 (Opt. 7) and European Technical Approval ETA-05/0116.
Installation with marking and spreading tool.
Sales unit: 50 pieces
Lieske Part No.: 469542

Type: FZEA II 10X40 G
Sales unit: 100 pc
Lieske Part No.: 679369

Fire protection tested and approved steel expansion anchor for use in aerated concrete.
Sales unit: 25 pieces
Lieske Part No.: 1055067

Fire protection tested and approved steel expansion anchor for use in aerated concrete.
Sales unit: 25 pieces
Lieske Part No.: 469544

Styrene-free vinyl ester composite mortar for expansion-free anchoring of high loads with threaded anchor rods. Coaxial cartridge including 1 mixing tube, to be applied with dispensing gun type VM-P 380 Profi.
European technical approval for cracked and non-cracked concrete, as well as masonry made of solid and perforated bricks. Earthquake-proof in concrete according to category C1. Fire protection approval for concrete and masonry with fire resistance classes up to 120 minutes.
Substrate temperature during application -10°C to +40°C (concrete), ambient temperature after complete hardening -40°C to +120°C (in concrete). Shelf life at least 18 months when stored in a dark, cool and dry place.
Lieske Part No.: 1044250

Styrene-free vinyl ester composite mortar for expansion-free anchoring of high loads with threaded anchor rods. Coaxial cartridge including 1 mixing tube, to be applied with standard cartridge gun or VM-P 345 Profi.
European Technical Assessment (ETA) for cracked and non-cracked concrete, as well as masonry made of solid and perforated bricks. Earthquake-proof in concrete according to category C1. Fire protection approval for concrete and masonry with fire resistance classes up to 120 minutes.
Substrate temperature during application -10°C to +40°C (concrete), ambient temperature after complete hardening -40°C to +120°C (in concrete). Shelf life at least 18 months when stored in a dark, cool and dry place.
Lieske Part No.: 2062467

The anchor rod and matching plastic perforated sleeve are used in conjunction with the VMU plus injection mortar to attach loads to masonry walls without any expansion pressure. The system is also used for fastening in concrete ceilings. On walls made of concrete and solid brick, the anchor rod is only mounted with the VMU plus injection mortar, without a perforated sleeve.
Sales unit: 10 pieces
Lieske Part No.: 1044251

The anchor rod and matching plastic perforated sleeve are used in conjunction with the VMU plus injection mortar to attach loads to masonry walls without expansion pressure. The system is also used for fastening in concrete ceilings. On walls made of concrete and solid brick, the anchor rod is only mounted with the VMU plus injection mortar, without a perforated sleeve.
Lieske Part No.: 1350014

The anchor rod and matching plastic perforated sleeve are used in conjunction with the VMU plus injection mortar to attach loads to masonry walls without any expansion pressure. The system is also used for fastening in concrete ceilings. On walls made of concrete and solid brick, the anchor rod is only mounted with the VMU plus injection mortar, without a perforated sleeve.
Sales unit: 10 pieces
Lieske Part No.: 104426

The anchor rod and matching plastic perforated sleeve are used in conjunction with the VMU plus injection mortar to attach loads to masonry walls without any expansion pressure. The system is also used for fastening in concrete ceilings. On walls made of concrete and solid brick, the anchor rod is only mounted with the VMU plus injection mortar, without a perforated sleeve.
Sales unit: 10 pieces
Lieske Part No.: 1044260

The anchor rod and matching plastic perforated sleeve are used in conjunction with the VMU plus injection mortar to attach loads to masonry walls without expansion pressure. The system is also used for fastening in concrete ceilings. On walls made of concrete and solid brick, the anchor rod is only mounted with the VMU plus injection mortar, without a perforated sleeve.
Sales unit: 10 pieces
Lieske Part No.: 2014089

The anchor rod and matching plastic perforated sleeve are used in conjunction with the VMU plus injection mortar to attach loads to masonry walls without any expansion pressure. The system is also used for fastening in concrete ceilings. On walls made of concrete and solid brick, the anchor rod is only mounted with the VMU plus injection mortar, without a perforated sleeve.
Sales unit: 10 pieces
Lieske Part No.: 1044261

Mit der Ankerstange und dazu passender Kunststoff-Siebhülse werden Lasten, in Verbindung mit dem Injektionsmörtel VMU plus, spreizdruckfrei an Wänden aus Mauerwerk befestigt. Das System wird auch zur Befestigung in Decken aus Beton angewendet. An Wänden aus Beton und Vollstein wird die Ankerstange nur mit dem Injektionsmörtel VMU plus montiert, ohne Siebhülse. Verkaufseinheit: 10 ST.
Sales unit: 10 pieces
Lieske Part No.: 2144648

The plastic sieve sleeve is a supplement to the anchor rod or internally threaded sleeve and is used for mounting components on masonry.
Sales unit: 10 pieces
Lieske Part No.: 1044262

The plastic sieve sleeve is a supplement to the anchor rod or internally threaded sleeve and is used for mounting components on masonry.
Lieske Part No.: 1044263

The plastic sieve sleeve is a supplement to the anchor rod or internally threaded sleeve and is used for mounting components on masonry.
Sales unit: 10 pieces
Lieske Part No.: 1350012

The plastic sieve sleeve is a supplement to the anchor rod or internally threaded sleeve and is used for mounting components on masonry.
Sales unit: 10 pieces
Lieske Part No.: 2014090

Self-tapping screw for fixing the metal fire protection ducts and all molded parts to the supports during suspended installation.
Sales unit: 100 pieces
Lieske Part No.: 339283

Screw with special milling ribs for fire protection duct PYROLINE® Con D and PYROLINE® Con S, for fastening cable clamps in the duct. Required plate thickness at least 20 mm.
Sales unit: 100 pieces
Lieske Part No.: 826603

Screw anchor for direct installation without dowels in cracked and non-cracked concrete and masonry. With round head for universal fastenings. Torx drive T30.
CE-marked construction product tested in accordance with EAD with European Technical Assessment (ETA) and proof of applicability. Load-bearing capacities under fire load proven up to fire resistance class R120.
Lieske Part No.: 1101391

Sales unit: 100 pieces
Lieske Part No.: 539676

Screw anchor for direct installation without dowels in cracked and non-cracked concrete and masonry. With hexagon drive and pressed-on disc for supporting large loads. Suitable for fastening hanging supports and wall brackets.
CE-marked construction product tested in accordance with EAD with European Technical Assessment (ETA) and proof of applicability. Load-bearing capacities under fire load proven up to fire resistance class R120.
Lieske Part No.: 1343504

Self-drilling wood screw for fire-safe fastening of cable systems to load-bearing wooden components to ensure functional integrity in accordance with DIN 4102 Part 12. The disc head shape enables installation without an additional washer.
Sales unit: 200 pieces
Lieske Part No.: 1352446

Self-drilling wood screw for fire-safe fastening of cable systems to load-bearing wooden components to ensure functional integrity in accordance with DIN 4102 Part 12. The disc head shape enables installation without an additional washer.
Sales unit: 100 pieces
Lieske Part No.: 1426210

Self-drilling wood screw for fire-safe fastening of cable systems to load-bearing wooden components to ensure functional integrity in accordance with DIN 4102 Part 12. The disc head shape enables installation without an additional washer.
Sales unit: 100 pieces
Lieske Part No.: 1031814

Self-drilling wood screw for fire-safe fastening of cable systems to load-bearing wooden components to ensure functional integrity in accordance with DIN 4102 Part 12. The disc head shape enables installation without an additional washer.
Sales unit: 100 pieces
Lieske Part No.: 1031815

Self-drilling wood screw for fire-safe fastening of cable systems to load-bearing wooden components to ensure functional integrity in accordance with DIN 4102 Part 12. The disc head shape enables installation without an additional washer.
Sales unit: 50 pieces
Lieske Part No.: 1426211

Self-drilling wood screw for fire-safe fastening of cable systems to load-bearing wooden components to ensure functional integrity in accordance with DIN 4102 Part 12. The disc head shape enables installation without an additional washer.
Sales unit: 50 pieces
Lieske Part No.: 1031830

Self-drilling wood screw for fire-safe fastening of cable systems to load-bearing wooden components to ensure functional integrity in accordance with DIN 4102 Part 12. The disc head shape enables installation without an additional washer.
Lieske Part No.: 1441733

Self-drilling wood screw for fire-safe fastening of cable systems to load-bearing wooden components to ensure functional integrity in accordance with DIN 4102 Part 12. The disc head shape enables installation without an additional washer.
Sales unit: 50 pieces
Lieske Part No.: 1032118

Screw anchor for direct installation without dowels in cracked and non-cracked concrete and masonry. With hexagon drive and pressed-on disc for supporting large loads. Suitable for fastening hanging supports and wall brackets.
CE-marked construction product tested in accordance with EAD with European Technical Assessment (ETA) and proof of applicability. Load-bearing capacities under fire load proven up to fire resistance class R120.
Sales unit: 25 pieces
Lieske Part No.: 1343496

Screw anchor for direct installation without dowels in cracked and non-cracked concrete and masonry. With countersunk head for universal fastenings. Torx drive T40.
CE-marked construction product tested in accordance with EAD with European Technical Assessment (ETA) and proof of applicability. Load-bearing capacities under fire load proven up to fire resistance class R120.
Sales unit: 50 pieces
Lieske Part No.: 1101392

Schraubanker zur direkten Montage ohne Dübel in gerissenem und ungerissenem Beton sowie Mauerwerk. Mit Sechskantantrieb und angepresster Scheibe zur Aufnahme großer Lasten. Geeignet für die Befestigung von Hängestielen und Wandauslegern in Feuchträumen und im Außenbereich.
Gemäß EAD geprüftes, CE-gekennzeichnetes Bauprodukt mit Europäisch Technischer Bewertung (ETA) und Anwendbarkeitsnachweis. Tragfähigkeiten unter Brandbelastung bis zur Feuerwiderstandsklasse R120 nachgewiesen. Verkaufseinheit: 25 ST.
Sales unit: 25 pieces
Lieske Part No.: 875449

Schraubanker zur direkten Montage ohne Dübel in gerissenem und ungerissenem Beton sowie Mauerwerk. Mit Ringöse für universelle Befestigungen. Setzwerkzeug im Lieferumfang enthalten. Verkaufseinheit: 200 ST.
Sales unit: 200 pieces
Lieske Part No.: 1296812

Screw anchor for direct installation without dowels in concrete and masonry. With small countersunk head for attaching cable clamps through the threaded base.
Load-bearing capacity under fire load proven up to fire resistance class R120.
Sales unit: 200 pieces
Lieske Part No.: 136495

Lieske Part No.: 539492

Screw anchor for direct installation without dowels in cracked and non-cracked concrete and masonry. With large round head for fastening mounting and profile rails. Torx drive T30.
CE-marked construction product tested in accordance with EAD with European Technical Assessment (ETA) and proof of applicability. Load-bearing capacities under fire load proven up to fire resistance class R120.
Sales unit: 50 pieces
Lieske Part No.: 1101397

Screw anchor for direct installation without dowels in cracked and non-cracked concrete and masonry. M6 connection thread for fastening clamps with threaded base.
CE-marked construction product tested in accordance with EAD with European Technical Assessment (ETA) and proof of applicability. Load-bearing capacities under fire load proven up to fire resistance class R120.
Sales unit: 100 pieces
Lieske Part No.: 1343511