Installation Material from OBO Bettermann

Lock nut according to DIN 46319, with metric thread according to IEC 423.
Sales unit: 50 pieces
Lieske Part No.: 372421

Lock nut according to DIN 46319, with metric thread according to IEC 423.
Sales unit: 25 pieces
Lieske Part No.: 649434

Lock nut according to DIN 46319, with metric thread according to IEC 423.
Sales unit: 25 pieces
Lieske Part No.: 2013108

Lock nut according to DIN 46319, with metric thread according to IEC 423.
Sales unit: 25 pieces
Lieske Part No.: 827997

Locknut according to DIN 46319, with metric thread according to IEC 423.
Note: Only tighten locknuts made of polystyrene moderately due to the risk of stress cracking!
Sales unit: 100 pieces
Lieske Part No.: 687520

Locknut according to DIN 46319, with metric thread according to IEC 423.
Note: Only tighten locknuts made of polystyrene moderately due to the risk of stress cracking!
Lieske Part No.: 884740

Locknut according to DIN 46319, with metric thread according to IEC 423.
Note: Only tighten locknuts made of polystyrene moderately due to the risk of stress cracking!
Lieske Part No.: 152682

Locknut according to DIN 46319, with metric thread according to IEC 423.
Note: Only tighten locknuts made of polystyrene moderately due to the risk of stress cracking!
Lieske Part No.: 541017

Locknut according to DIN 46319, with metric thread according to IEC 423.
Note: Only tighten locknuts made of polystyrene moderately due to the risk of stress cracking!
Lieske Part No.: 504290

Locknut according to DIN 46319, with metric thread according to IEC 423.
Note: Only tighten locknuts made of polystyrene moderately due to the risk of stress cracking!
Lieske Part No.: 849315

Locknut according to DIN 46319, with metric thread according to IEC 423.
Note: Only tighten locknuts made of polystyrene moderately due to the risk of stress cracking!
Lieske Part No.: 963175

Locknut according to DIN 46319, with metric thread according to IEC 423.
Note: Only tighten locknuts made of polystyrene moderately due to the risk of stress cracking!
Lieske Part No.: 810187

OBO V-TEC EX M Cable Glands

metric

Cable gland with EC Type Examination

certificate for equipment and protective systems

intended for use in potentially explosive

atmospheres Directive 94/9/EC



EC-Type Examination Certificate Number: PTB 99 ATEX 3112X and ... 3113X



with metric connecting thread to IEC 423 robust

Cap-nut cable gland with large sealing area and

Strain relief and torsion protection for high sealing demands

- Seal of Chloroprene-/Nitrilkautschuk molded sealing ribs

therefore, no connection thread sealing ring needed

- VDE-tested



IP 68 at 5 bar

Material: PA polyamide, black, flame retardant to

VDE 0471/IEC 695 Part 2-1,

Test temperature 750 ° C

Type: VTEC EX M32 SW item: 1 ST.
Sales unit: 20 pieces
Lieske Part No.: 243551

Cable gland with hexagonal intermediate socket, form C4 according to DIN 46320 with PG connection thread according to DIN 40430.
Pressure rings made of steel, galvanized and transparently passivated.
Sealing ring made of NR/SBR.
Protection class: with connection thread sealing ring IP65, without connection thread sealing ring IP54.
With simple sealing ring, with small inner diameter.

• Prices according to DEL quotation.

Sales unit: 50 pieces
Lieske Part No.: 911950

Cable gland with hexagonal intermediate socket, form C4 according to DIN 46320 with PG connection thread according to DIN 40430.
Pressure rings made of steel, galvanized and transparently passivated.
Sealing ring made of NR/SBR.
Protection class: with connection thread sealing ring IP65, without connection thread sealing ring IP54.
With cut-in ring.

• Prices according to DEL quotation.

Sales unit: 50 pieces
Lieske Part No.: 944712

Cable gland with hexagonal intermediate socket, form C4 according to DIN 46320 with PG connection thread according to DIN 40430.
Pressure rings made of steel, galvanized and transparently passivated.
Sealing ring made of NR/SBR.
Protection class: with connection thread sealing ring IP65, without connection thread sealing ring IP54.
With cut-in ring.

• Prices according to DEL quotation.

Sales unit: 50 pieces
Lieske Part No.: 307625

Cable gland with hexagonal intermediate socket, form C4 according to DIN 46320 with PG connection thread according to DIN 40430.
Pressure rings made of steel, galvanized and transparently passivated.
Sealing ring made of NR/SBR.
Protection class: with connection thread sealing ring IP65, without connection thread sealing ring IP54.
With cut-in ring.

• Prices according to DEL quotation.

Sales unit: 50 pieces
Lieske Part No.: 281810

Cable gland with hexagonal intermediate socket, form C4 according to DIN 46320 with PG connection thread according to DIN 40430.
Pressure rings made of steel, galvanized and transparently passivated.
Sealing ring made of NR/SBR.
Protection class: with connection thread sealing ring IP65, without connection thread sealing ring IP54.
With cut-in ring.

• Prices according to DEL quotation.

Sales unit: 25 pieces
Lieske Part No.: 607965

Cable gland with hexagonal intermediate socket, form C4 according to DIN 46320 with PG connection thread according to DIN 40430.
Pressure rings made of steel, galvanized and transparently passivated.
Sealing ring made of NR/SBR.
Protection class: with connection thread sealing ring IP65, without connection thread sealing ring IP54.
With cut-in ring.

• Prices according to DEL quotation.

Sales unit: 25 pieces
Lieske Part No.: 570860

Cable gland with hexagonal intermediate socket, form C4 according to DIN 46320 with PG connection thread according to DIN 40430.
Pressure rings made of steel, galvanized and transparently passivated.
Sealing ring made of NR/SBR.
Protection class: with connection thread sealing ring IP65, without connection thread sealing ring IP54.
With cut-in ring.

• Prices according to DEL quotation.

Sales unit: 10 pieces
Lieske Part No.: 795638

Cable gland with hexagonal intermediate socket, form C4 according to DIN 46320 with PG connection thread according to DIN 40430.
Pressure rings made of steel, galvanized and transparently passivated.
Sealing ring made of NR/SBR.
Protection class: with connection thread sealing ring IP65, without connection thread sealing ring IP54.
With cut-in ring.

• Prices according to DEL quotation.

Sales unit: 10 pieces
Lieske Part No.: 968412

Cable gland with hexagonal intermediate socket, form C4 according to DIN 46320 with metric connection thread according to DIN EN 60423 or ISO 68. Pressure rings made of steel, galvanized and transparently passivated. Sealing ring made of NR/SBR.
Protection class: with connection thread sealing ring IP65, without connection thread sealing ring IP54.
With cut-in ring.

• Prices according to DEL quotation.

Sales unit: 50 pieces
Lieske Part No.: 637380

Cable gland with hexagonal intermediate socket, form C4 according to DIN 46320 with metric connection thread according to DIN EN 60423 or ISO 68. Pressure rings made of steel, galvanized and transparently passivated. Sealing ring made of NR/SBR.
Protection class: with connection thread sealing ring IP65, without connection thread sealing ring IP54.
With cut-in ring.

• Prices according to DEL quotation.

Sales unit: 25 pieces
Lieske Part No.: 208347

Cable gland with hexagonal intermediate socket, form C4 according to DIN 46320 with metric connection thread according to DIN EN 60423 or ISO 68. Pressure rings made of steel, galvanized and transparently passivated. Sealing ring made of NR/SBR.
Protection class: with connection thread sealing ring IP65, without connection thread sealing ring IP54.
With cut-in ring.

• Prices according to DEL quotation.

Sales unit: 25 pieces
Lieske Part No.: 307793

Cable gland with hexagonal intermediate socket, form C4 according to DIN 46320 with metric connection thread according to DIN EN 60423 or ISO 68. Pressure rings made of steel, galvanized and transparently passivated. Sealing ring made of NR/SBR.
Protection class: with connection thread sealing ring IP65, without connection thread sealing ring IP54.
With cut-in ring.

• Prices according to DEL quotation.

Sales unit: 10 pieces
Lieske Part No.: 1427584

Cable gland with hexagonal intermediate socket, form C4 according to DIN 46320 with metric connection thread according to DIN EN 60423 or ISO 68. Pressure rings made of steel, galvanized and transparently passivated. Sealing ring made of NR/SBR.
Protection class: with connection thread sealing ring IP65, without connection thread sealing ring IP54.
With cut-in ring.

• Prices according to DEL quotation.

Sales unit: 10 pieces
Lieske Part No.: 560543

Cap nut type cable gland with large sealing range as well as strain relief and anti-twisting protection for high sealing requirements, with PG connection thread in accordance with DIN 40430. Clamping insert made of polyamide, sealing ring made of chloroprene nitrile rubber, with pre-assembled O-ring on the connection thread.
Protection class IP68 at 5 bar/1 h, tested in accordance with VDE 0619,
connection thread length 'normal', based on DIN 46320.

• Prices according to DEL quotation.

Sales unit: 50 pieces
Lieske Part No.: 159904

Cap nut type cable gland with large sealing range as well as strain relief and anti-twisting protection for high sealing requirements, with PG connection thread in accordance with DIN 40430. Clamping insert made of polyamide, sealing ring made of chloroprene nitrile rubber, with pre-assembled O-ring on the connection thread.
Protection class IP68 at 5 bar/1 h, tested in accordance with VDE 0619,
connection thread length 'normal', based on DIN 46320.

• Prices according to DEL quotation.

Sales unit: 50 pieces
Lieske Part No.: 126277

Cap nut type cable gland with large sealing range as well as strain relief and anti-twisting protection for high sealing requirements, with PG connection thread in accordance with DIN 40430. Clamping insert made of polyamide, sealing ring made of chloroprene nitrile rubber, with pre-assembled O-ring on the connection thread.
Protection class IP68 at 5 bar/1 h, tested in accordance with VDE 0619,
connection thread length 'normal', based on DIN 46320.

• Prices according to DEL quotation.

Sales unit: 50 pieces
Lieske Part No.: 624737

Cap nut type cable gland with large sealing range as well as strain relief and anti-twisting protection for high sealing requirements, with PG connection thread in accordance with DIN 40430. Clamping insert made of polyamide, sealing ring made of chloroprene nitrile rubber, with pre-assembled O-ring on the connection thread.
Protection class IP68 at 5 bar/1 h, tested in accordance with VDE 0619,
connection thread length 'normal', based on DIN 46320.

• Prices according to DEL quotation.

Sales unit: 50 pieces
Lieske Part No.: 104721

Cap nut type cable gland with large sealing range as well as strain relief and anti-twisting protection for high sealing requirements, with PG connection thread in accordance with DIN 40430. Clamping insert made of polyamide, sealing ring made of chloroprene nitrile rubber, with pre-assembled O-ring on the connection thread.
Protection class IP68 at 5 bar/1 h, tested in accordance with VDE 0619,
connection thread length 'normal', based on DIN 46320.

• Prices according to DEL quotation.

Sales unit: 25 pieces
Lieske Part No.: 647683

Cap nut type cable gland with large sealing range as well as strain relief and anti-twisting protection for high sealing requirements, with PG connection thread in accordance with DIN 40430. Clamping insert made of polyamide, sealing ring made of chloroprene nitrile rubber, with pre-assembled O-ring on the connection thread.
Protection class IP68 at 5 bar/1 h, tested in accordance with VDE 0619,
connection thread length 'normal', based on DIN 46320.

• Prices according to DEL quotation.

Sales unit: 25 pieces
Lieske Part No.: 905623

Cap nut type cable gland with large sealing range as well as strain relief and anti-twisting protection for high sealing requirements, with PG connection thread in accordance with DIN 40430. Clamping insert made of polyamide, sealing ring made of chloroprene nitrile rubber, with pre-assembled O-ring on the connection thread.
Protection class IP68 at 5 bar/1 h, tested in accordance with VDE 0619,
connection thread length 'normal', based on DIN 46320.

• Prices according to DEL quotation.

Sales unit: 20 pieces
Lieske Part No.: 185360

Cap nut type cable gland with large sealing range as well as strain relief and anti-twisting protection for high sealing requirements, with PG connection thread in accordance with DIN 40430. Clamping insert made of polyamide, sealing ring made of chloroprene nitrile rubber, with pre-assembled O-ring on the connection thread.
Protection class IP68 at 5 bar/1 h, tested in accordance with VDE 0619,
connection thread length 'normal', based on DIN 46320.

• Prices according to DEL quotation.

Sales unit: 10 pieces
Lieske Part No.: 931059

Cap nut type cable gland with large sealing range as well as strain relief and anti-twisting protection for high sealing requirements, with PG connection thread in accordance with DIN 40430. Clamping insert made of polyamide, sealing ring made of chloroprene nitrile rubber, with pre-assembled O-ring on the connection thread.
Protection class IP68 at 5 bar/1 h, tested in accordance with VDE 0619,
connection thread length 'normal', based on DIN 46320.

• Prices according to DEL quotation.

Sales unit: 5 pieces
Lieske Part No.: 780640

Cap nut type cable gland with large sealing range as well as strain relief and anti-twisting protection for high sealing requirements with long PG connection thread in accordance with DIN 40430, for thicker housing walls in conjunction with a lock nut.
Clamping insert made of polyamide.
Sealing ring made of chloroprene/nitrile rubber.
O-ring pre-mounted on the connection thread.
Protection class IP68 at 5 bar/1 h.
Tested in accordance with VDE 0619.
With long connection thread.

• Prices according to DEL quotation.

Sales unit: 10 pieces
Lieske Part No.: 2013123

Robust cable gland with metric connection thread according to IEC 423 in cap nut design for high sealing requirements. Strain relief, anti-twist protection and tightness over the entire clamping range. Sealing ring made of neoprene. Clamping insert made of polyamide. With pre-assembled sealing ring on the connection thread, VDE-tested according to DIN EN 50262, protection class IP68 at 5 bar/1h, temperature range -20 to +100°C.

• Prices according to DEL quotation.

Sales unit: 50 pieces
Lieske Part No.: 373810

Robust cable gland with metric connection thread according to IEC 423 in cap nut design for high sealing requirements. Strain relief, anti-twist protection and tightness over the entire clamping range. Sealing ring made of neoprene. Clamping insert made of polyamide. With pre-assembled sealing ring on the connection thread, VDE-tested according to DIN EN 50262, protection class IP68 at 5 bar/1h, temperature range -20 to +100°C.

• Prices according to DEL quotation.

Sales unit: 50 pieces
Lieske Part No.: 827826

Robust cable gland with metric connection thread according to IEC 423 in cap nut design for high sealing requirements. Strain relief, anti-twist protection and tightness over the entire clamping range. Sealing ring made of neoprene. Clamping insert made of polyamide. With pre-assembled sealing ring on the connection thread, VDE-tested according to DIN EN 50262, protection class IP68 at 5 bar/1h, temperature range -20 to +100°C.

• Prices according to DEL quotation.

Sales unit: 25 pieces
Lieske Part No.: 173714

Robust cable gland with metric connection thread according to IEC 423 in cap nut design for high sealing requirements. Strain relief, anti-twist protection and tightness over the entire clamping range. Sealing ring made of neoprene. Clamping insert made of polyamide. With pre-assembled sealing ring on the connection thread, VDE-tested according to DIN EN 50262, protection class IP68 at 5 bar/1h, temperature range -20 to +100°C.

• Prices according to DEL quotation.

Sales unit: 25 pieces
Lieske Part No.: 949712

Robust cable gland with metric connection thread according to IEC 423 in cap nut design for high sealing requirements. Strain relief, anti-twist protection and tightness over the entire clamping range. Sealing ring made of neoprene. Clamping insert made of polyamide. With pre-assembled sealing ring on the connection thread, VDE-tested according to DIN EN 50262, protection class IP68 at 5 bar/1h, temperature range -20 to +100°C.

• Prices according to DEL quotation.

Sales unit: 20 pieces
Lieske Part No.: 368249

Robust cable gland with metric connection thread according to IEC 423 in cap nut design for high sealing requirements. Strain relief, anti-twist protection and tightness over the entire clamping range. Sealing ring made of neoprene. Clamping insert made of polyamide. With pre-assembled sealing ring on the connection thread, VDE-tested according to DIN EN 50262, protection class IP68 at 5 bar/1h, temperature range -20 to +100°C.

• Prices according to DEL quotation.

Sales unit: 5 pieces
Lieske Part No.: 310574

Robust cable gland with metric connection thread according to IEC 423 in cap nut design for high sealing requirements. Strain relief, anti-twist protection and tightness over the entire clamping range. Sealing ring made of neoprene. Clamping insert made of polyamide. With pre-assembled sealing ring on the connection thread, VDE-tested according to DIN EN 50262, protection class IP68 at 5 bar/1h, temperature range -20 to +100°C.

• Prices according to DEL quotation.

Sales unit: 5 pieces
Lieske Part No.: 577283

Robust cable gland with metric connection thread according to IEC 423 in cap nut design for high sealing requirements. Strain relief, anti-twist protection and tightness over the entire clamping range. Sealing ring made of neoprene. Clamping insert made of polyamide. With pre-assembled sealing ring on the connection thread, VDE-tested according to DIN EN 50262, protection class IP68 at 5 bar/1h, temperature range -20 to +100°C.

• Prices according to DEL quotation.

Sales unit: 5 pieces
Lieske Part No.: 433589

Robust cable gland with metric connection thread according to IEC 423 in cap nut design for high sealing requirements. Strain relief, anti-twist protection and tightness over the entire clamping range. For thicker housing walls in conjunction with a lock nut. Sealing ring made of neoprene. Clamping insert made of polyamide. With pre-assembled sealing ring on the connection thread, VDE-tested according to DIN EN 50262, protection class IP68 at 5 bar/1 h.
With long connection thread.

• Prices according to DEL quotation.

Sales unit: 50 pieces
Lieske Part No.: 670343

Robust cable gland with metric connection thread according to IEC 423 in cap nut design for high sealing requirements. Strain relief, anti-twist protection and tightness over the entire clamping range. For thicker housing walls in conjunction with a lock nut. Sealing ring made of neoprene. Clamping insert made of polyamide. With pre-assembled sealing ring on the connection thread, VDE-tested according to DIN EN 50262, protection class IP68 at 5 bar/1 h.
With long connection thread.

• Prices according to DEL quotation.

Lieske Part No.: 258948

Robust cable gland with metric connection thread according to IEC 423 in cap nut design for high sealing requirements. Strain relief, anti-twist protection and tightness over the entire clamping range. For thicker housing walls in conjunction with a lock nut. Sealing ring made of neoprene. Clamping insert made of polyamide. With pre-assembled sealing ring on the connection thread, VDE-tested according to DIN EN 50262, protection class IP68 at 5 bar/1 h.
With long connection thread.

• Prices according to DEL quotation.

Sales unit: 25 pieces
Lieske Part No.: 436564

Robust cable gland with metric connection thread according to IEC 423 in cap nut design for high sealing requirements. Strain relief, anti-twist protection and tightness over the entire clamping range. For thicker housing walls in conjunction with a lock nut. Sealing ring made of neoprene. Clamping insert made of polyamide. With pre-assembled sealing ring on the connection thread, VDE-tested according to DIN EN 50262, protection class IP68 at 5 bar/1 h.
With long connection thread.

• Prices according to DEL quotation.

Sales unit: 25 pieces
Lieske Part No.: 683306

Robust cable gland with metric connection thread according to IEC 423 in cap nut design for high sealing requirements. Strain relief, anti-twist protection and tightness over the entire clamping range. For thicker housing walls in conjunction with a lock nut. Sealing ring made of neoprene. Clamping insert made of polyamide. With pre-assembled sealing ring on the connection thread, VDE-tested according to DIN EN 50262, protection class IP68 at 5 bar/1 h.
With long connection thread.

• Prices according to DEL quotation.

Sales unit: 10 pieces
Lieske Part No.: 535132

Robust cable gland with metric connection thread according to IEC 423 in cap nut design for high sealing requirements. Strain relief, anti-twist protection and tightness over the entire clamping range. For thicker housing walls in conjunction with a lock nut. Sealing ring made of neoprene. Clamping insert made of polyamide. With pre-assembled sealing ring on the connection thread, VDE-tested according to DIN EN 50262, protection class IP68 at 5 bar/1 h.
With long connection thread.

• Prices according to DEL quotation.

Sales unit: 5 pieces
Lieske Part No.: 206892