Installation Material from OBO Bettermann

Hammerkopfschraube mit Feder zur Verwendung mit Profilschienen MS4121 und MS4141.
Sales unit: 50 pieces
Lieske Part No.: 2146268

Hammerkopfschraube mit Feder zur Verwendung mit Profilschienen MS4121 und MS4141.
Sales unit: 25 pieces
Lieske Part No.: 2146267

Hammerkopfschraube mit Feder zur Verwendung mit Profilschienen MS4121 und MS4141.
Sales unit: 50 pieces
Lieske Part No.: 2146271

Hammerkopfschraube mit Feder zur Verwendung mit Profilschienen MS4121 und MS4141.
Sales unit: 25 pieces
Lieske Part No.: 2146269

Hammerkopfschraube mit Feder zur Verwendung mit Profilschienen MS4121 und MS4141.
Sales unit: 50 pieces
Lieske Part No.: 2146266

Hammer head screw for use with profile rails MS4121 and MS4141
Sales unit: 50 pieces
Lieske Part No.: 1023847

Hammer head screw for use with profile rails MS4121 and MS4141
Sales unit: 50 pieces
Lieske Part No.: 102435

Hammer head screw for use with profile rails MS4121 and MS4141
Sales unit: 50 pieces
Lieske Part No.: 102439

Hammer head screw for use with profile rails MS4121 and MS4141
Sales unit: 25 pieces
Lieske Part No.: 102450

Hammer head screw for use with profile rails MS4121 and MS4141
Sales unit: 50 pieces
Lieske Part No.: 102478

Hammerkopfschraube zur Verwendung mit Profilschienen MS4121 und MS4141
Sales unit: 25 pieces
Lieske Part No.: 1356693

Hammer head screw for use with profile rails MS4121 and MS4141
Sales unit: 20 pieces
Lieske Part No.: 1057869

Hammerkopfschraube mit Feder zur Verwendung mit Profilschienen MS4121 und MS4141
Sales unit: 25 pieces
Lieske Part No.: 630393

Hammer head screw with spring for use with profile rails MS4121 and MS4141
Sales unit: 50 pieces
Lieske Part No.: 630430

Hook screw for fastening cable trays to the boom.
Sales unit: 100 pieces
Lieske Part No.: 628611

U-clamp with RS foot, metal pressure tray with rounded edges for cable protection. For vertical and horizontal mounting of 1 single cable on round profiles or pipes. With 1-start screw on pressure tray, universal hexagon screw head SW10, with slot and Phillips. Suitable for all round profile irons or pipes with a diameter of up to 22 mm. Suitable for indoor and outdoor mounting. The use of a counter tray is recommended.
Sales unit: 100 pieces
Lieske Part No.: 2094328

U-clamp with RS foot, metal pressure tray with rounded edges for cable protection. For vertical and horizontal mounting of 1 single cable on round profiles or pipes. With 1-start screw on pressure tray, universal hexagon screw head SW10, with slot and Phillips. Suitable for all round profile irons or pipes with a diameter of up to 22 mm. Suitable for indoor and outdoor mounting. The use of a counter tray is recommended.
Sales unit: 100 pieces
Lieske Part No.: 2094329

U-clamp with RS foot, metal pressure tray with rounded edges for cable protection. For vertical and horizontal mounting of 1 single cable on round profiles or pipes. With 1-start screw on pressure tray, universal hexagon screw head SW10, with slot and Phillips. Suitable for all round profile irons or pipes with a diameter of up to 22 mm. Suitable for indoor and outdoor mounting. The use of a counter tray is recommended.
Sales unit: 100 pieces
Lieske Part No.: 2094330

U-clamp with RS foot, metal pressure tray with rounded edges for cable protection. For vertical and horizontal mounting of 1 single cable on round profiles or pipes. With 1-start screw on pressure tray, universal hexagon screw head SW10, with slot and Phillips. Suitable for all round profile irons or pipes with a diameter of up to 22 mm. Suitable for indoor and outdoor mounting. The use of a counter tray is recommended.
Sales unit: 100 pieces
Lieske Part No.: 2094331

U-clamp with RS foot, metal pressure tray with rounded edges for cable protection. For vertical and horizontal mounting of 1 single cable on round profiles or pipes. With 1-start screw on pressure tray, universal hexagon screw head SW10, with slot and Phillips. Suitable for all round profile irons or pipes with a diameter of up to 22 mm. Suitable for indoor and outdoor mounting. The use of a counter tray is recommended.
Sales unit: 100 pieces
Lieske Part No.: 2094332

U-clamp with RS foot, metal pressure tray with rounded edges for cable protection. For vertical and horizontal mounting of 1 single cable on round profiles or pipes. With 1-start screw on pressure tray, universal hexagon screw head SW10, with slot and Phillips. Suitable for all round profile irons or pipes with a diameter of up to 22 mm. Suitable for indoor and outdoor mounting. The use of a counter tray is recommended.
Sales unit: 100 pieces
Lieske Part No.: 2094333

U-clamp with RS foot, metal pressure tray with rounded edges for cable protection. For vertical and horizontal mounting of 1 single cable on round profiles or pipes. With 1-start screw on pressure tray, universal hexagon screw head SW10, with slot and Phillips. Suitable for all round profile irons or pipes with a diameter of up to 22 mm. Suitable for indoor and outdoor mounting. The use of a counter tray is recommended.
Sales unit: 100 pieces
Lieske Part No.: 2094334

U-clamp with RS foot, metal pressure tray with rounded edges for cable protection. For vertical and horizontal mounting of 1 single cable on round profiles or pipes. With 1-start screw on pressure tray, universal hexagon screw head SW10, with slot and Phillips. Suitable for all round profile irons or pipes with a diameter of up to 22 mm. Suitable for indoor and outdoor mounting. The use of a counter tray is recommended.
Sales unit: 100 pieces
Lieske Part No.: 2094335

U-clamp with RS foot, metal pressure tray with rounded edges for cable protection. For vertical and horizontal mounting of 1 single cable on round profiles or pipes. With 1-start screw on pressure tray, universal hexagon screw head SW10, with slot and Phillips. Suitable for all round profile irons or pipes with a diameter of up to 22 mm. Suitable for indoor and outdoor mounting. The use of a counter tray is recommended.
Sales unit: 100 pieces
Lieske Part No.: 2094336

Clamp with N-foot, metal pressure tray with rounded edges for cable protection. For electrical connection of the shield braid of shielded cables. For vertical and horizontal mounting of 1 single cable on C-profile rail. For slot width 11 - 12 mm. With 1-start screw on pressure tray, universal hexagon screw head SW10, with slot and Phillips. Suitable for indoor and outdoor installation. The cable shield can also be used for potential equalization if both ends are connected to the reference potential. Counter tray included in delivery.
Sales unit: 50 pieces
Lieske Part No.: 110293

Clamp with N-foot, metal pressure tray with rounded edges for cable protection. For electrical connection of the shield braid of shielded cables. For vertical and horizontal mounting of 1 single cable on C-profile rail. For slot width 11 - 12 mm. With 1-start screw on pressure tray, universal hexagon screw head SW10, with slot and Phillips. Suitable for indoor and outdoor installation. The cable shield can also be used for potential equalization if both ends are connected to the reference potential. Counter tray included in delivery.
Sales unit: 50 pieces
Lieske Part No.: 2094337

Clamp with N-foot, metal pressure tray with rounded edges for cable protection. For electrical connection of the shield braid of shielded cables. For vertical and horizontal mounting of 1 single cable on C-profile rail. For slot width 11 - 12 mm. With 1-start screw on pressure tray, universal hexagon screw head SW10, with slot and Phillips. Suitable for indoor and outdoor installation. The cable shield can also be used for potential equalization if both ends are connected to the reference potential. Counter tray included in delivery.
Sales unit: 50 pieces
Lieske Part No.: 2094338

Clamp with N-foot, metal pressure tray with rounded edges for cable protection. For electrical connection of the shield braid of shielded cables. For vertical and horizontal mounting of 1 single cable on C-profile rail. For slot width 11 - 12 mm. With 1-start screw on pressure tray, universal hexagon screw head SW10, with slot and Phillips. Suitable for indoor and outdoor installation. The cable shield can also be used for potential equalization if both ends are connected to the reference potential. Counter tray included in delivery.
Sales unit: 50 pieces
Lieske Part No.: 2094339

Clamp with N-foot, metal pressure tray with rounded edges for cable protection. For electrical connection of the shield braid of shielded cables. For vertical and horizontal mounting of 1 single cable on C-profile rail. For slot width 11 - 12 mm. With 1-start screw on pressure tray, universal hexagon screw head SW10, with slot and Phillips. Suitable for indoor and outdoor installation. The cable shield can also be used for potential equalization if both ends are connected to the reference potential. Counter tray included in delivery.
Sales unit: 50 pieces
Lieske Part No.: 2094340

For attaching strip earthing strips up to 30 mm wide to profile rails, suitable for all
C-profile rails with 16 - 17 mm slot width.
Sales unit: 25 pieces
Lieske Part No.: 915290

Clamp body, screw and counter plate made of hot-dip galvanized steel, pressure and counter pan made of polypropylene, halogen-free, light grey RAL 7035.
Supplied complete with counter plate and counter pans.
Sales unit: 25 pieces
Lieske Part No.: 617702

Clamp body, screw and counter plate made of hot-dip galvanized steel, pressure and counter pan made of polypropylene, halogen-free, light grey RAL 7035.
Supplied complete with counter plate and counter pans.
Sales unit: 25 pieces
Lieske Part No.: 569943

Clamp body, screw and counter plate made of hot-dip galvanized steel, pressure and counter pan made of polypropylene, halogen-free, light grey RAL 7035.
Supplied complete with counter plate and counter pans.
Sales unit: 25 pieces
Lieske Part No.: 982419

Clamp body, screw and counter plate made of hot-dip galvanized steel, pressure and counter pan made of polypropylene, halogen-free, light grey RAL 7035.
Supplied complete with counter plate and counter pans.
Sales unit: 25 pieces
Lieske Part No.: 907034

Clamp body, screw and counter plate made of hot-dip galvanized steel, pressure and counter pan made of polypropylene, halogen-free, light grey RAL 7035.
Supplied complete with counter plate and counter pans.
Sales unit: 25 pieces
Lieske Part No.: 615213

Clamp body, screw and counter plate made of hot-dip galvanized steel, pressure and counter pan made of polypropylene, halogen-free, light grey RAL 7035.
Supplied complete with counter plate and counter pans.
Sales unit: 25 pieces
Lieske Part No.: 572470

Clamp body, screw and counter plate made of hot-dip galvanized steel, pressure and counter pan made of polypropylene, halogen-free, light grey RAL 7035.
Supplied complete with counter plate and counter pans.
Sales unit: 25 pieces
Lieske Part No.: 890428

Clamp body, screw and counter plate made of hot-dip galvanized steel, pressure and counter pan made of polypropylene, halogen-free, light grey RAL 7035.
Supplied complete with counter plate and counter pans.
Sales unit: 25 pieces
Lieske Part No.: 699336

Clamp body, screw and counter plate made of hot-dip galvanized steel, pressure and counter pan made of polypropylene, halogen-free, light grey RAL 7035.
Supplied complete with counter plate and counter pans.
Sales unit: 25 pieces
Lieske Part No.: 764715

U-clamp with hammer head base, metal pressure tray with rounded edges for cable protection. For vertical and horizontal mounting of 1 single cable on C-profile rail. For slot width 16 - 17 mm. With 1-start screw on pressure tray, universal hexagon screw head SW10, with slot and Phillips. Suitable for indoor and outdoor installation. Counter tray must be ordered separately.
Lieske Part No.: 2072114

U-clamp with hammer head base, metal pressure tray with rounded edges for cable protection. For vertical and horizontal mounting of 2 individual cables on C-profile rail. For slot width 16 - 17 mm. With 1-start screw on pressure tray, universal hexagon screw head SW10, with slot and Phillips. Suitable for indoor and outdoor installation. Multiple cables should be separated by double trays. The use of a counter tray is recommended.
Lieske Part No.: 2072115

U-clamp with hammer head base, metal pressure tray with rounded edges for cable protection. For vertical and horizontal mounting of 3 individual cables on C-profile rail. For slot width 16 - 17 mm. With 1-start screw on pressure tray, universal hexagon screw head SW10, with slot and Phillips. Suitable for indoor and outdoor installation. Multiple cables should be separated by double trays. The use of a counter tray is recommended.
Sales unit: 50 pieces
Lieske Part No.: 2072116

U-clamp with hammer head base, metal pressure tray with rounded edges for cable protection. For vertical and horizontal mounting of 1 single cable on C-profile rail. For slot width 16 - 17 mm. With 1-start screw on pressure tray, universal hexagon screw head SW10, with slot and Phillips. Suitable for indoor and outdoor installation. Counter tray must be ordered separately.
Lieske Part No.: 2072117

U-clamp with hammer head base, metal pressure tray with rounded edges for cable protection. For vertical and horizontal mounting of 2 individual cables on C-profile rail. For slot width 16 - 17 mm. With 1-start screw on pressure tray, universal hexagon screw head SW10, with slot and Phillips. Suitable for indoor and outdoor installation. Multiple cables should be separated by double trays. The use of a counter tray is recommended.
Sales unit: 50 pieces
Lieske Part No.: 1102697

U-clamp with hammer head base, metal pressure tray with rounded edges for cable protection. For vertical and horizontal mounting of 3 individual cables on C-profile rail. For slot width 16 - 17 mm. With 1-start screw on pressure tray, universal hexagon screw head SW10, with slot and Phillips. Suitable for indoor and outdoor installation. Multiple cables should be separated by double trays. The use of a counter tray is recommended.
Sales unit: 50 pieces
Lieske Part No.: 1102698

U-clamp with hammer head base, metal pressure tray with rounded edges for cable protection. For vertical and horizontal mounting of 1 single cable on C-profile rail. For slot width 16 - 17 mm. With 1-start screw on pressure tray, universal hexagon screw head SW10, with slot and Phillips. Suitable for indoor and outdoor installation. Counter tray must be ordered separately.
Lieske Part No.: 2072256

U-clamp with hammer head base, metal pressure tray with rounded edges for cable protection. For vertical and horizontal mounting of 2 individual cables on C-profile rail. For slot width 16 - 17 mm. With 1-start screw on pressure tray, universal hexagon screw head SW10, with slot and Phillips. Suitable for indoor and outdoor installation. Multiple cables should be separated by double trays. The use of a counter tray is recommended.
Sales unit: 50 pieces
Lieske Part No.: 1102699

Bügelschelle mit Hammerkopf-Fuß, Metalldruckwanne mit gerundeten Kanten für Kabelschutz. Zur vertikalen und horizontalen Montage von 3 Einzelkabeln an C-Profilschiene. Für Schlitzweite 16 - 17 mm. Mit 1-gängiger Schraube an Druckwanne, universeller Sechskant-Schraubenkopf SW10, mit Schlitz und Kreuzschlitz. Geeignet für Montage im Innen- und Außenbereich. Mehrere Kabel sollten durch Doppelwannen getrennt werden. Der Einsatz einer Gegenwanne wird empfohlen.
Sales unit: 50 pieces
Lieske Part No.: 2145461

U-clamp with hammer head base, metal pressure tray with rounded edges for cable protection. For vertical and horizontal mounting of 1 single cable on C-profile rail. For slot width 16 - 17 mm. With 1-start screw on pressure tray, universal hexagon screw head SW10, with slot and Phillips. Suitable for indoor and outdoor installation. Counter tray must be ordered separately.
Lieske Part No.: 2072257

Bügelschelle mit Hammerkopf-Fuß, Metalldruckwanne mit gerundeten Kanten für Kabelschutz. Zur vertikalen und horizontalen Montage von 2 Einzelkabeln an C-Profilschiene. Für Schlitzweite 16 - 17 mm. Mit 1-gängiger Schraube an Druckwanne, universeller Sechskant-Schraubenkopf SW10, mit Schlitz und Kreuzschlitz. Geeignet für Montage im Innen- und Außenbereich. Mehrere Kabel sollten durch Doppelwannen getrennt werden. Der Einsatz einer Gegenwanne wird empfohlen.
Sales unit: 50 pieces
Lieske Part No.: 871578