These sockets allow the use of lamps with different bases. However, it must be noted that a lamp with a smaller pin diameter should never be used if a lamp with a larger pin diameter has already been used. G4, GY6.35 sockets GX5.3, GZ6.35 connection elements Housing: ceramic, cover plate: mica T350, nominal value: 10/24, contacts: Ni Cables: nickel-plated copper, multi-wire 0.75qmm, PTFE insulation, max. 250°C Through holes for M3 screws Type: 324 Cable length: 500mm, wire end ferrules Material: ceramic Design: connection element and socket Color: white With starter holder: No
Lieske Part No.: 815364

E40 socket, one-piece material: Porcelain, white, T270 with lamp fuse Nominal value: 18/500/5 kV Head contact terminals: 1.5-4qmm compression spring under center contact Long holes for M5 screws Weight: 229.3g Type: 12801 with lamp fuse, socket: E40, material: Porcelain, design: Edison socket, fastening type: screw fastening, color: white, with starter holder: no
Lieske Part No.: 769640

Socket E40 With lamp fuse, Material: Porcelain, Socket: E40, Design: Bar socket, Color: white, With starter holder: No
Lieske Part No.: 262938

E40 socket, one-piece material: Porcelain, white, T270 with lamp fuse Nominal value: 18/500/5kV Head contact terminals: 1.5-4qmm Pressure spring under center contact Fastening bar with slots for M5 screws Weight: 243g Type: 12811 With starter holder: No Socket: E40 Nipple thread: without Material: Porcelain, Fastening type: screw fastening Design: Edison socket Color: white
Lieske Part No.: 903520

G13 plug-in sockets with starter holder for lamps T8, light point height: 25mm large rotor T130, nominal value: 5/500 Side and bottom plug-in terminals: 0.5-1qmm Plug-in base for luminaire cutout 10x20mm with wall thickness 0.4-1mm Weight: 8.5g Type: 28920 Material: Plastic Design: Plug-in socket Socket: G13, Mounting type: Plug-in mounting Color: white With starter holder: Yes
Lieske Part No.: 303958

large rotor Light point height: 25mm without starter holder Material: Plastic Design: Plug-in socket Mounting type: Plug-in mounting Socket: G13 Colour: white With starter holder: No
Lieske Part No.: 1316156

These sockets allow the use of lamps with different bases. However, it must be noted that a lamp with a smaller pin diameter should never be used if a lamp with a larger pin diameter has already been used. G4, GY6.35 sockets GX5.3, GZ6.35 connection elements Housing: ceramic, cover plate: mica T350, nominal value: 10/24, contacts: Ni Cables: nickel-plated copper, multi-wire 0.75qmm, PTFE insulation, max. 250°C through holes for M3 screws Type: 324 Cable length: 1050mm, wire end ferrules Design: connection element and socket Material: ceramic Color: white With starter holder: No
Lieske Part No.: 242550

G13 plug-in socket for lamps T8/T12 Housing: PC, inner part: PBT GF, T140 Nominal value: 2/500 Single plug-in terminals: 0.5-1qmm Snap-in lugs for wall thickness 1.4-2mm With slotted inlet Weight: 14.5g Housing gray dust-/waterproof Material: plastic Design: plug-in socket Color: gray Socket: G13 With starter holder: No
Lieske Part No.: 221051

E27 socket Axis inclination 3° Profiled, smooth Housing: PET GF, T210 Nominal value: 4/250 Double plug-in terminals: 0.5-2.5qmm Side mounting hole for M4 screw Mounting type: Screw mounting Design: Edison socket Material: Plastic Socket: E27 Color: white With starter holder: No
Lieske Part No.: 204330

LPH selectable: 33/40/46/51/56 or 43mm (side lamp guide) Insert foot for wall thickness 0.5-1mm Weight: 6g, Nipple thread: without, Color: gray, Material: plastic, Design: built-in socket, Mounting type: plug-in mounting, Socket: G13, With starter holder: No
Lieske Part No.: 860539

G13 double sockets for lamps T8 and T12, light point height: 25mm, light point spacing: 76mm housing: PC, white, rotor: PBT GF, white, T130, nominal value: 2/500, double plug-in terminals on the underside: 0.5-1qmm (lamp circuit) single plug-in terminals on the underside: 0.5-1qmm (starter circuit) plug-in foot for wall thickness 0.6-1mm weight: 21g without starter holder. with cams, material: plastic, socket: G13, fastening type: plug-in fastening, design: double socket, colour: white, with starter holder: no,
Lieske Part No.: 998309

Lamp holder for TC-L lamps Material: PC, white, UV-stabilized Insert base for wall thickness up to 1mm Weight: 0.7g, Design: Connection element and socket, Fastening type: Plug-in fastening, Nipple thread: without, Socket: 2G11, Material: Plastic, Color: white, With starter holder: No
Lieske Part No.: 458130

G4-/GZ4 Usage pack 1000!! Design: Connection element and socket Fastening type: Plug-in fastening Socket: G4/GZ4 Material: Plastic Color: black With starter holder: No
Lieske Part No.: 150419

GR10q plug-in socket material: PC, white, T110 Nominal value: 2/250 Side single plug-in terminals: 0.5-1qmm Bottom split pins for wall thickness 0.6-1mm Weight: 7.2g Type: 35540, With starter holder: No, Fastening type: Plug-in fastening, Socket: Other, Material: Plastic, Design: Plug-in socket, Color: white
Lieske Part No.: 199232

E27 sockets, for push-on caps, smooth casing, white Housing: PET GF, T210 Nominal value: 4/250 Double plug-in terminals: 0.5-2.5qmm Through holes for M4 screws Weight: 17.4g Type: 64401, Socket: E27 Material: Plastic Fastening type: Screw fastening Design: Edison socket Color: white With starter holder: No
Lieske Part No.: 931319

E27 socket, one-piece, white Profiled, smooth Housing: PET GF, T210 Nominal value: 4/250 Double plug-in terminals: 0.5-2.5qmm Through holes for M3 screws Holes on the back for self-tapping screws in accordance with ISO 1481/7049-ST3, 9-C/F Weight: 13.5g Type: 64770, With starter holder: No, Material: Plastic, Socket: E27, Fastening type: Screw fastening, Design: Edison socket, Color: white
Lieske Part No.: 303934

E27 sockets, for plug-on caps, external thread 40x2.5 IEC 60399 white Housing: PET GF, T210 Nominal value: 4/250 Double plug-in terminals: 0.5-2.5qmm Through holes for M4 screws Weight: 19.1g Type: 64501, Design: Edison socket, Fastening type: Screw fastening, Socket: E27, Material: Plastic, Color: white, With starter holder: No
Lieske Part No.: 270342

G13 double sockets, protection class IP54, for converting IP20 lights to IP54 lights With plug-in foot for standard cut-out 13.3x25.5mm Locking lugs for wall thickness 0.7mm for lamps D26mm Material: PC, white, inner part: PBT GF, T140 Max. permissible temperature on the back of the socket: Tm 110°C Nominal value: 2/500 Single plug-in terminals: 0.5-1qmm Large rotor made of heat-resistant PBT GF Pin support for secure contact Spring-loaded length compensation For lights of protection class I or II Weight: 67g Type: 16201, Socket: G13, Mounting type: Plug-in mounting, Design: Double socket, Material: Plastic, Color: white, With starter holder: No
Lieske Part No.: 352078

G13 double sockets, protection class IP54, for converting IP20 lights to IP54 lights With plug-in foot for standard cut-out 13.3x25.5mm Locking lugs for wall thickness 0.7mm for protective tubes D50mmm Material: PC, white, inner part: PBT GF, T140 Max. permissible temperature on the back of the socket: Tm 110°C Nominal value: 2/500 Single plug-in terminals: 0.5-1qmm Large rotor made of heat-resistant PBT GF Pin support for secure contact Spring-loaded length compensation For lights of protection class I or II Weight: 124g Type: 16203, Material: Plastic, Design: Double socket, Mounting type: Plug-in mounting, Socket: G13, Color: white, With starter holder: No
Lieske Part No.: 1316153

G 13 versions, IP67 / IP54
Dust and water proof, for luminaires of protection class I or II plug-in terminals, white, springy length adjustment, silicone seal
with Push-17.6 x 25.5 mm
Type: T 8 (26 mm)

Type: 108973
Quantity: 1 unit.
Lieske Part No.: 326153

G
3 sockets, IP67 / IP54 dust and water proof, for luminaires of protection class I or II plug-in terminals, white, springy length adjustment, silicone gasket with Push-
7.6 x 25.5 mm Type: T
2 (38 mm) Type:
8974 Quantity:
ST.
Lieske Part No.: 872823

G13 double sockets, protection class IP67 With plug-in foot for cut-out 17.6x25.5mm Locking lugs for wall thickness 1 4-2mm for lamps D26mm Material: PC, white, inner part: PBT GF, T140 Max. permissible temperature on the back of the socket: Tm 110°C Nominal value: 2/500 Single plug-in terminals: 0.5-1qmm Large rotor made of heat-resistant PBT GF Pin support for secure contact Spring-loaded length compensation For lamps of protection class I or II Weight: 68g Type: 16401 Material: Plastic Design: Double socket, fastening type: plug-in fastening Socket: G13 Color: white With starter holder: No
Lieske Part No.: 215481

G13 double sockets, protection class IP67 With plug-in foot for cut-out 17.6x25.5mm Locking lugs for wall thickness 1.4-2mm for lamps D38mmmMaterial: PC, white, inner part: PBT GF, T140Max. permissible temperature on the back of the socket: Tm 110°C Nominal value: 2/500 Single plug-in terminals: 0.5-1qmm Large rotor made of heat-resistant PBT GF Pin support for secure contact Spring-loaded length compensation For lamps of protection class I or II Weight: 77g Type: 16402, Socket: G13, Mounting type: Plug-in mounting, Design: Double socket, Material: Plastic, With starter holder: No, Color: white
Lieske Part No.: 643738

G13 double sockets, protection class IP67 With plug-in foot for cut-out 17.6x25.5mm Locking lugs for wall thickness 1.4-2mm for protective tubes D50mmmMaterial: PC, white, inner part: PBT GF, T140Max. permissible temperature on the back of the socket: Tm 110°C Nominal value: 2/500 Single plug-in terminals: 0.5-1qmm Large rotor made of heat-resistant PBT GF Pin support for secure contact Spring-loaded length compensation For lights of protection class I or II Weight: 125g Type: 16403, Material: Plastic, Socket: G13, Design: Double socket, Mounting type: Plug-in mounting, With starter holder: No, Color: white
Lieske Part No.: 828161

Clip-on caps, white For one-piece E27 sockets Material: PA GF Round hole: D10.5mm Anti-twist cross groove: outside Through holes for M4 screws Weight: 5.4g Type: 97511 Socket: E27, Material: Plastic Fastening type: Screw fastening Design: Edison socket Color: white With starter holder: No
Lieske Part No.: 472370

Snap-on caps, black For one-piece E27 sockets Material: PA GF Round hole: D10.5mm Anti-twist cross groove: outside Through holes for M4 screws Weight: 5.5g Type: 97511, Color: black Material: plastic Socket: E27 Version: Edison socket Fastening type: screw fastening With starter holder: No
Lieske Part No.: 958350

Clip-on cap, white For one-piece E27 sockets Material: PA GF Nipple thread: M10x1 Weight: 9.6g Type: 85070, Design: Edison socket, Nipple thread: M10x1, Fastening type: Screw fastening, Socket: E27, Material: Plastic, Color: white, With starter holder: No
Lieske Part No.: 114536

Clip-on cap, white For one-piece E14 sockets Material: PA GF Nipple thread: M10x1 Weight: 7.6g Type: 85075 Nipple thread: M10x1 Design: Edison socket Fastening type: Screw fastening Material: Plastic Socket: E14 Color: white With starter holder: No
Lieske Part No.: 958351

Snap-on cap, black For one-piece E14 sockets Material: PA GF Nipple thread: M10x1 Weight: 8.8g Type: 85075 Colour: black Socket: E14 Material: Plastic Fastening type: Screw fastening Nipple thread: M10x1 Version: Edison socket With starter holder: No
Lieske Part No.: 1316152

Clip-on cap, white For one-piece E14 sockets Material: PA GF Profile hole: D10.5x8.6mm Through holes for M3 screws Weight: 4.4g Type: 97635, Nipple thread: without, Material: Plastic, Socket: E14, Design: Edison socket, Fastening type: Screw fastening, Color: white, With starter holder: No
Lieske Part No.: 793007

Clip-on cap, white roof shape For one-piece E27 sockets With integrated strain relief For cables H03VV-F 2x0.5 or H03VV-F 2x0.75m Material: PA GF Weight: 10.6g Type: 83282, Material: Plastic, Socket: E27, Design: Edison socket, Fastening type: Screw fastening, With starter holder: No, Color: white
Lieske Part No.: 100567

E 27 Thermoplasfassungen rating 4/25, socket screw ring terminals Thermoplastic E
4 Ø, 43 mm height
5 mm Colour: black Type:
9
62 Quantity:
ST.
Lieske Part No.: 715391

E 27 Thermoplasfassungen rating 4/25, socket screw ring terminals Thermoplastic E
4 Ø, 43 mm height
5 mm Color: brass color type:
9
64 Quantity:
ST.
Lieske Part No.: 891887

Plastic screw rings, black For E14 sockets D34mm, height: 7.5mm Type: 05202, With starter holder: No, Socket: E14, Material: Plastic, Color: black, Nipple thread: without, Fastening type: Screw fastening, Design: Edison socket
Lieske Part No.: 393676

2G7 plug-in socket Housing: PBT GF, white, T140, nominal value: 2/250 Double plug-in terminals: 0.5-1qmm (lamp circuit) Single plug-in terminals: 0.5-1qmm (starter circuit) Rear hole for self-tapping screw in accordance with ISO 1481/7049-ST4, 2-C/F Front through holes for M3 screws Socket locking by 15° rotation Weight: 13.7g Type: 35610 Material: Plastic Design: Plug-in socket Socket: 2G7 Mounting type: Screw fastening Color: white With starter holder: No
Lieske Part No.: 941385

Lampholders for compact fluorescent lamps
2 G 7 versions
for 11W TC-SEL 5.7 and Anschraubfuß with back and side holes for self-tapping screws
Version: Anschraubfuß

Type: 109238
Quantity: 1 unit.
Lieske Part No.: 257323

2G7 surface-mounted socket Housing: PBT GF, white, T140, nominal value: 2/250 Double plug-in terminals: 0.5-1qmm (lamp circuit) Single plug-in terminals: 0.5-1qmm (starter circuit) Rear hole for self-tapping screws in accordance with ISO 1481/7049-ST4, 2-C/F Front through holes for M3 screws Weight: 14g Type: 35612 Socket: 2G7 Material: Plastic Design: Surface-mounted socket Fastening type: Screw fastening Color: white With starter holder: No
Lieske Part No.: 638242

Clamping nipple For cables H03VV-F and H03VVH2-F 2X0.5 or 2X0.75m Material: PA Threaded attachment: M10x1 Length: 11mm With locking screw Weight: 1.6g Nipple thread: M10x1 Fastening type: screw fastening, Material: plastic Version: other Color: white
Lieske Part No.: 878291

Nipple for E14 caps with molded thread: M10x1 Cross groove: external material: PA, white Thread attachment: M10x1, with hexagon collar Weight: 0.5g Length: 10mm, Design: connection element and socket, nipple thread: M10x1, Fastening type: screw fastening, Material: plastic, Socket: E14, Color: white, With starter holder: No
Lieske Part No.: 450835

Clamping nipple for cables H03VV-F and H03VVH2-F 2X0.5 or 2X0.75m Material: PA Threaded attachment: M10x1 Length: 11mm With locking screw Weight: 1.5g Type: 09701, Fastening type: screw fastening, Nipple thread: M10x1, Material: plastic, Design: other, Color: black
Lieske Part No.: 1262446

Lampholders for mains voltage halogen lamps R7s sockets aluminum, M3 screws through holes, temperature concentration camp. T3 Usable cable length 35 mm Type: Line
, Mm ² Type:
9265 sales unit:
ST.
Lieske Part No.: 960579

E 27 Thermoplasfassungen rating 4/25, socket screw ring terminals Thermoplastic E 27 Ø, 55 mm height
5 mm Colour: black Type:
9285 sales unit:
ST.
Lieske Part No.: 505531

E 27 Thermoplasfassungen rating 4/25, socket screw ring terminals Thermoplastic E 27 Ø, 55 mm height
5 mm Color: brass color Type:
9289 Quantity:
ST.
Lieske Part No.: 829628

G13 push-through sockets for lamps T8 and T12 Light point height: 23mm with cams Housing: PC, white, Front plate: PBT GF, white T140, Nominal value: 2/500 Plug-in terminals: 0.5-1qmm Side locking lugs for wall thickness 0.4-2mm Weight: 6g Type: 27700, With starter holder: No, Design: Push-through socket, Fastening type: Plug-in fastening, Socket: G13, Material: Plastic, Color: white
Lieske Part No.: 784714

G13 push-through sockets for lamps T8 and T12 Light point height: 23mm without cams Housing: PC, white, Front plate: PBT GF, white T140, Nominal value: 2/500 Plug-in terminals: 0.5-1qmm Side locking lugs for wall thickness 0.4-2mm Weight: 6g Type: 27701, Design: Push-through socket, Mounting type: Plug-in mounting, Socket: G13, Material: Plastic, With starter holder: No, Color: white
Lieske Part No.: 578699

E14 sockets, for push-on caps, smooth casing, black Housing: PET GF, T210, nominal value: 2/250 Double plug-in terminals: 0.5-1.5qmm Mounting holes on the back for self-tapping screws in accordance with ISO 1481/7049-ST2, 9-C/F Weight: 11.4g Type: 64001 Mounting type: plug-in mounting Design: Edison socket, socket: E14 Material: plastic Color: black With starter holder: No
Lieske Part No.: 661336

E14 sockets, for push-on caps, black External thread 28x2 IEC 60399 Housing: PET GF, T210, nominal value: 2/250 Double plug-in terminals: 0.5-1.5qmm Mounting holes on the back for self-tapping screws in accordance with ISO 1481/7049-ST2, 9-C/F Weight: 12.2g Type: 64101 Mounting type: Plug-in mounting Design: Edison socket Socket: E14 Material: Plastic Color: black With starter holder: No
Lieske Part No.: 872708

E14 sockets, for push-on caps, white External thread 28x2 IEC 60399 Housing: PET GF, T210, Nominal value: 2/250 Double plug-in terminals: 0.5-1.5qmm Mounting holes on the back for self-tapping screws in accordance with ISO 1481/7049-ST2, 9-C/F Weight: 12.5g Type: 64101, Material: Plastic, Socket: E14, Mounting type: Plug-in mounting, Design: Edison socket, With starter holder: No, Color: white
Lieske Part No.: 405019

Snap-on caps for GU10, GZ10 sockets Material: PA GF, black molded thread M8x1 Mounting holes for screws M3 Weight: 3.8g Type: 97243, Design: other, Socket: other, Material: plastic, Color: black, Nipple thread: other, Fastening type: screw fastening, With starter holder: No
Lieske Part No.: 702894

Snap-on caps for GU10, GZ10 sockets type 310mMaterial: PA GF, black molded thread: M10x1 mounting holes for M3 screws Weight: 3.4g Type: 97244, Color: black, Socket: other, Version: other, Material: plastic, Fastening type: screw fastening, Nipple thread: M10x1, With starter holder: No
Lieske Part No.: 313206