Versions in Accessories

Through-wiring made of heat-resistant individual cables. For use in combination with lamp D2/H2 and lamp D2/H2 as well as lamp D2/H2 with coupling (ZLK SAN) D/H1 or D/H2 and lamp D2/H2 with dummy module D/H (BL) L60 or L75 or L150 as well as in combination with lamp D1/H1 with dummy module D/H (BL) L150. For use in combination with lamp D1/H1 and lamp D2/H2. With this combination, the through-wiring must be cut to length. 3-core version, Ø 1.5 mm2. Packaging unit 1 set. Accessories available for 10 years after the invoice date subject to reasonable changes in the interest of progress.
Lieske Part No.: 1053492

Transparent power cable with integrated snap-in strain relief. 3-core version, Ø 1.5 mm2. Cable length 1000 mm. Packaging unit consisting of 1 piece. Width 130 mm, height 150 mm. Accessories available for 10 years after the invoice date subject to reasonable changes in the interest of progress.
Lieske Part No.: 1053494

Transparent power cable with integrated snap-in strain relief. 3-core version, Ø 1.5 mm2. Cable length 2000 mm. Packaging unit consisting of 1 piece. Width 130 mm, height 150 mm. Accessories available for 10 years after the invoice date subject to reasonable changes in the interest of progress.
Lieske Part No.: 1053495

Transparent power cable with integrated snap-in strain relief. 5-core version, Ø 1.5 mm2. Cable length 1000 mm. Packaging unit consisting of 1 piece. Width 130 mm, height 150 mm. Accessories available for 10 years after the invoice date subject to reasonable changes in the interests of progress.
Lieske Part No.: 1053496

Transparent power cable with integrated snap-in strain relief. 7-core version, Ø 1.5 mm2. Cable length 2000 mm. Packaging unit consisting of 1 piece. Width 130 mm, height 150 mm. Accessories available for 10 years after the invoice date subject to reasonable changes in the interest of progress.
Lieske Part No.: 2092885

Y-cable suspension for suspension lengths up to: 2000 mm. Packaging unit consisting of 1 piece. Accessories available for 10 years after the invoice date subject to reasonable changes in the interest of progress.
Lieske Part No.: 1053499

Mounting frame for ceiling mounting. For use in combination with a luminaire from the series: ArimoFit G2 M84... . Made of sheet steel, white powder-coated (RAL 9016). Dimensions (L x W): 622 mm x 622 mm, H = 57 mm. For flush mounting in the ceiling. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 2051735

Mounting frame for ceiling mounting. For use in combination with a luminaire from the series: ArimoFit G2 M59... . Made of sheet steel, white powder-coated (RAL 9016). Dimensions (L x W): 1547 mm x 310 mm, H = 57 mm. For flush mounting in the ceiling. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 2062580

Mounting accessories for installation in sawn ceiling openings. For luminaires from the Arimo Fit M84 G2 / M57 G2 series.
Lieske Part No.: 2051738

Mounting accessories for installation in sawn ceiling openings. For luminaires from the Arimo Fit M59 G2 series.
Lieske Part No.: 2062581

End cap made of thermoplastically fused ASA / TPE with a high-quality, matt surface structure and surface quality in accordance with VDI30. For protection class-compliant power supply (IP66), the end cap is equipped with 3 self-sealing membranes for cable cross-sections 7 mm - 13 mm and 3 pre-stamped power supply points for PG screw connections (M20 / M25). For replacement or exchange. Packaging unit 2 pieces. Color light gray. Module length 75 mm. Accessories available 10 years after the invoice date subject to reasonable changes in the interest of progress.
Lieske Part No.: 2037159

Renovation plate for covering existing ceiling cutouts in renovation applications. For round downlights of the 2325 G3 C07 series... . For ceiling cutouts Ø 220 -250 mm.
Lieske Part No.: 2069758

Renovation plate for covering existing ceiling cutouts in renovation applications. For round downlights of the 2325 G3 C05... series. For ceiling cutouts Ø 160 -200 mm.
Lieske Part No.: 2069757

Mounting frame for ceiling mounting of recessed luminaires Siella G8... M84 / Valineo G4... M84.
Lieske Part No.: 2128707

Accessories, mounting bracket, mounting accessories for WLS27 line lights, snap bracket for WLS27 line light, material: polycarbonate, 5.3 mm hole for fastening, contains: 2x snap clips
Lieske Part No.: 1920125

E14 sockets, three-part smooth jacket, jacket lock, black material: PET GF, T190, nominal value: 2/250 socket terminals: 0.5-2.5qmm molded thread: M10x1 weight: 23g type: 54000, design: Edison socket, nipple thread: M10x1, fastening type: screw fastening, socket: E14, material: plastic, color: white, with starter holder: no
Lieske Part No.: 461467

E14 sockets, three-part external thread jacket 28x2 IEC 399mAntel lock, whiteMaterial: PET GF, T190, Nominal value: 2/250 Socket terminals: 0.5-2.5qmm Molded thread: M10x1 Weight: 23g Type: 54100, Design: Edison socket Nipple thread: M10x1 Fastening type: Screw fastening Color: black, Socket: E14 Material: Plastic With starter holder: No
Lieske Part No.: 211898

E27 sockets, three-part smooth jacket, jacket lock Material: PET GF, T190, Nominal value: 4/250 Socket terminals: 0.5-2.5qmm Molded thread: M10x1 Weight: 34g Type: 52800 black Color: black Socket: E27 Material: plastic Nipple thread: M10x1 Design: Edison socket Mounting type: screw fastening, With starter holder: No
Lieske Part No.: 450644

E27 sockets, three-part smooth jacket, jacket lock material: PET GF, T190, nominal value: 4/250 socket terminals: 0.5-2.5qmm nipple thread: M10x1 weight: 34g type: 52800 brass-colored, design: Edison socket, nipple thread: M10x1, fastening type: screw fastening, socket: E27, color: brass, material: plastic, with starter holder: no
Lieske Part No.: 1324204

E27 sockets, three-part external thread jacket 40x2.5 IEC 399mAntel lock, whiteMaterial: PET GF, T190, Nominal value: 4/250 Socket terminals: 0.5-2.5qmm Molded thread: M10x1 Weight: 34g Type: 52900, Design: Edison socket Nipple thread: M10x1 Fastening type: Screw fastening Socket: E27, Material: Plastic Color: white With starter holder: No
Lieske Part No.: 1324203

Fc2 socket Housing: Ceramic, T250 Nominal value: 10/250/5kV, Contacts: Ni Cable: Cu tinned, fine-stranded 1qmm, Si insulation max. D3.6mm, length: 300mm Fastening screws M4, captive Weight: 102g rigid fastening Type: 02574 When using sockets for lamps with ignition pulses max. 20kV, the lamp manufacturer is responsible for compliance with creepage distances and clearances. Material: Ceramic, Design: Screw socket Fastening type: Screw fastening Socket: Fc2 With starter holder: No Color: white
Lieske Part No.: 286007

Fc2 socket Housing: Ceramic, T250 Nominal value: 10/250/5kV, Contacts: Ni Cable: Cu tinned, fine-stranded 1qmm, Si insulation max. D3.6mm, length: 300mm Fastening screws M4, captive Weight: 102g Movable fastening type 02575 When using sockets for lamps with ignition pulses max. 20kV, the lamp manufacturer is responsible for compliance with creepage distances and clearances. Material: Ceramic, Socket: Fc2, Fastening type: Screw fastening, Design: Screw socket, Color: white, With starter holder: No
Lieske Part No.: 356327

E 27 Thermoplasfassungen
Nominal value 4/250, socket terminals
Screw rings Thermoplastic
E 14 Ø 43.0 mm height 15 mm
Color: white

Type: 100125
Quantity: 1 unit.
Lieske Part No.: 412217

Candle sleeves for E14 candle sockets Material: plastic, white Height: 65mm Weight: 6.5g Type: 05310 with drop, Design: Edison socket, Material: plastic, Socket: E14, Color: white, With starter holder: No
Lieske Part No.: 533192

Candle sleeves for E14 candle sockets Material: Plastic, white Height: 85mm Weight: 7.5g Type: 05311 with drop Design: Edison socket Material: Plastic Socket: E14 With starter holder: No Color: white
Lieske Part No.: 129894

Candle sleeves for E14 candle sockets Material: plastic, white Height: 100mm Weight: 8g Type: 05312 with drop, Design: Edison socket, Material: plastic, Socket: E14, With starter holder: No, Color: white
Lieske Part No.: 644663

Candle sleeves for E14 candle holders Material: Plastic, white Height: 85mm Weight: 7.5g Type: 05314 without drops Material: Plastic Socket: E14 Version: Edison socket With starter holder: No Color: white
Lieske Part No.: 797552

Candle sleeves for E14 candle sockets Material: plastic, white Height: 100mm Weight: 8g Type: 05315 without drop Design: Edison socket Socket: E14 Material: plastic Color: white With starter holder: No
Lieske Part No.: 864379

Metal screw rings
Ø 14 E, 40.0 mm, height 12.5 mm
Color: chrome Type: 100194


Quantity: 1 unit.
Lieske Part No.: 119834

Metal screw rings e
4 Ø, 4 mm, height
2.5 mm Color: brass color type:

96 Quantity:
ST.
Lieske Part No.: 975126

Metal screw rings
E 27 Ø 54.0 mm, height 14.0 mm
Color: chrome

Type: 100217
Quantity: 1 unit.
Lieske Part No.: 290418

E metal screw rings Ø 27, 54, mm, height
4 mm Color: brass color type:
2
9 item:
ST.
Lieske Part No.: 104996

E 27 Thermoplasfassungen rating 4/25, socket screw ring terminals Thermoplastic E 27 Ø, 55 mm height
5 mm Colour: white Type:
27 Quantity:
ST.
Lieske Part No.: 907832

G 5 through-hole and surface mount
lateral. Locking lugs, screw terminals, with slot for screw fastening
Color: white

Type: 100305
Quantity: 1 unit.
Lieske Part No.: 623707

G5 built-in socket Housing: PC, white, T110 Nominal value: 2/500 Single plug-in terminals: 0.5-1qmm Rear split pins for wall thickness up to 1.2mm Weight: 2.6g Type: 09205 With starter holder: No Material: Plastic, Design: Built-in socket Mounting type: Plug-in mounting Socket: G5 Color: white
Lieske Part No.: 804320

Starterholders
For starters, DIN, screw terminals, Durchgengslöcher for screws M3 & M4 Type: 100315


Quantity: 1 unit.
Lieske Part No.: 607685

G
3 sockets, IP67 / IP54 dust and water proof, for luminaires of protection class I or II plug-in terminals, white, springy length adjustment, silicone gasket with Anschraubfuß execution: T
2 (38 mm) Type:
384 sales unit:
ST.
Lieske Part No.: 913313

G
3 sockets, IP67 / IP54 dust and water proof, for luminaires of protection class I or II plug-in terminals, white, springy length adjustment, silicone gasket with Anschraubfuß Type: T 8 (26 mm) Type:
387 Quantity:
ST.
Lieske Part No.: 796801

Lampholders for compact fluorescent lamps
Lamp holder for T Lamps
Steel zinc plated through hole M4 / M3, 5
Type: T 8 (26 mm)

Type: 100442
Quantity: 1 unit.
Lieske Part No.: 498774

Lampholders for compact fluorescent lamp holder for T-light steel zinc plated through hole M4 / M3, 5 Execution: T
2 (38 mm) Type:
444 sales unit:
ST.
Lieske Part No.: 904352

Material: plastic, type of accessories: other
Lieske Part No.: 980187

G13 double sockets for lamps T8 and T12, light point height: 25mm, light point spacing: 76mm housing: PC, white, rotor: PBT GF, white, T130, nominal value: 2/500, double plug-in terminals on the underside: 0.5-1qmm (lamp circuit) single plug-in terminals on the underside: 0.5-1qmm (starter circuit) plug-in foot for wall thickness 0.6-1mm weight: 21g with starter holder. without cam, design: double socket, color: white, with starter holder: no, socket: G13, fastening type: plug-in fastening, material: plastic, nipple thread: without
Lieske Part No.: 133661

G13 double sockets for lamps T8 and T12, light point height: 25mm, light point spacing: 76mm Housing: PC, white, rotor: PBT GF, white, T130, nominal value: 2/500, double plug-in terminals on the underside: 0.5-1qmm (lamp circuit) single plug-in terminals on the underside: 0.5-1qmm (starter circuit) plug-in foot for wall thickness 0.6-1mm Weight: 21g without starter holder. without cams, material: plastic, fastening type: plug-in fastening, socket: G13, design: double socket, colour: white, with starter holder: no
Lieske Part No.: 195892

Lampholders for compact fluorescent lamps

G 13 double version

Einsteckfuß, double-clamp terminals, with starter intake

Features: without cams

Model: 100548 Package: 1 PC.
Lieske Part No.: 392769

Ballasts

super flat design: 18 x 41 mm

with socket for TC, TC-D, 230V / 50Hz



Lamp power (Watts): 2 x 5-9 W

Model: 100552 Package: 1 PC.
Lieske Part No.: 149793

G13 socket light point height: 23.5mm Gr-Rotor, mounting type: plug-in mounting, socket: G13, design: plug-in socket, material: plastic, colour: white, with starter holder: yes
Lieske Part No.: 229108

G13 surface-mounted socket for lamps T8 and T12 Light point height: 25.5mm Housing, PC, white, Rotor: PBT GF, white, T130 Nominal value: 2/500 Double plug-in terminals: 0.5-1qmm Through hole: D3.8mm Type: 27722, Material: Plastic Fastening type: Plug-in fastening Design: Surface-mounted socket Socket: G13 With starter holder: No Color: white
Lieske Part No.: 295592

Ballasts

Standard Design: 28 x 41 mm

For TC, TC-D, TC-T, TC-DD, TC-F, TC-S, TC-L, 230 V / 50 Hz





Lamp power (watts): 18 W

Model: 100579 Package: 1 PC.
Lieske Part No.: 152832

Ballasts
super slim design: 18 x 41 mm
with setting for TC, TC-D, 230V / 50Hz
Lamp power (watts): 2 x 5-9 W
Type: 100583
Sales Unit: 1 ST.
Lieske Part No.: 910515

Sales unit: 1 ST.
Lieske Part No.: 607577