Versions in Accessories

Studded tape for fixing the cover in the middle of light strip configurations on both sides and in the corner of configurations with corner element (2 pieces each 30cm)
Lieske Part No.: 689486

Rope suspension for the ONDARIA LED product family. Accessories consisting of 3 ropes, 4000 mm long, terminal connection, retaining plate and ceiling rosette, diameter 191 mm x 36 mm, made of white plastic. Supply cables are not included and must be ordered separately. Minimum mounting height: 400 mm (D590/D870) or 800 mm (D1150). Weight: 0.2 kg
Lieske Part No.: 415576

Knife for cutting the cover (1 piece)
Lieske Part No.: 685532

Optik roller for simplified installation of the cover (1 piece)
Lieske Part No.: 685573

Cutting template for simplified cutting of the cover (1 piece)
Lieske Part No.: 689393

Rope suspension including ceiling rosette and strain relief for suspension height 2000 mm.
Lieske Part No.: 1345872

Connectors including cables, screws and strain reliefs for suspension height 2000 mm.
Lieske Part No.: 1345871

Cover on the roll made of polycarbonate (PC) according to NORM TP(a) classified for SLOTLIGHT infinity Opal/Diffuse with black shadow gap. Dimensions: 10000 x 38 x 1 mm Weight: 2 kg
Lieske Part No.: 640937

Light strip connector for simplified connection of channels in the light strip. Consists of 2 fixing plates, which are inserted into the side of the profile, and a connector element.
Lieske Part No.: 625890

Lieske Part No.: 358361

End cap including 20mm cover plate for surface-mounted and pendant luminaires for configurations over 4 metres (2 pieces)
Lieske Part No.: 627825

Cover on the roll made of polycarbonate (PC) classified according to TP(a) for SLOTLIGHT infinity Office. Transparent cover with two films for better glare control UGR<19 and 65°<3000 cd/m². Dimensions: 10150 x 65 x 1 mm Weight: 2 kg
Lieske Part No.: 420320

Lieske Part No.: 365159

Steel cable suspension (set) with compensating eccentric for balancing, for pendulum mounting of the low-voltage power rail profile SUPERSYTEM-H, consisting of: suspension canopy in white, steel cable, compensating eccentric and patented hanger with holder for stepless height adjustment, to be inserted into the profile grooves, steel cable length 2000mm, maximum tensile load: 20kg, Note: steel cable suspension required every 2000mm!
Lieske Part No.: 2096157

Steel cable suspension (set) for pendulum mounting of the low-voltage power rail profile SUPERSYTEM-U, consisting of: suspension canopy in white, steel cable and patented hanger with holder for stepless height adjustment, to be inserted into the profile grooves, steel cable length 2000mm, maximum tensile load: 20kg, Note: steel cable suspension required every 2000mm!
Lieske Part No.: 1341346

Cover cap set with 3 cover caps each for SUPERSYSTEM outdoor in microstructure paint in charcoal, matt. Weight: 0.02 kg
Lieske Part No.: 2088869

Mounting bracket for installation in plasterboard ceilings (2 pieces)
Lieske Part No.: 631663

Ceiling fastening element for tool-free connection of the ducts using CLIX technology. (2 pieces)
Lieske Part No.: 632117

Mounting discs.(5 pieces)
Lieske Part No.: 2088865

Chain suspension (2 pieces) including fastening hooks for attaching the SLOTLIGHT Inifinty BWS light
Lieske Part No.: 2089553

Mounting accessories for rope suspension of the RESCLITE PRO IP65 surface-mounted luminaire, stepless height adjustment up to a maximum length of 5 m. Fine adjustment using adjusting sleeve
Lieske Part No.: 2090547

1 piece wall mounting bracket in black including mounting spring for SLOTLIGHT Infinity attachment (SLOIN A) and direct/indirect (DI/ID) types as well as EQL for horizontal mounting on the wall. Maximum weight per wall mounting bracket is 15kg.
Lieske Part No.: 2089552

Cover on the roll made of polycarbonate (PC) according to the NORM TP(a) classified for SLOTLIGHT infinity Opal/Diffuse with black shadow gap. Dimensions: 45 mx 38 mm x 1 mm. Weight: 8 kg
Lieske Part No.: 2089548

Cover on the roll made of polycarbonate (PC) according to the NORM according to TP(a) classified for SLOTLIGHT infinity Opal/Diffuse with black shadow gap. Dimensions: 50 mx 38 mm x 1 mm. Weight: 8.9 kg
Lieske Part No.: 2089549

Continuous TPE sealing profile in black from the roll. Length: 10 m. Guaranteed in combination with the sealing optics and the sealing end caps protection class IP65 for the entire light strip system. Must not be cut into pieces over the entire length of the light strip. Dimensions: 10 mx 81 mm x 58 mm Weight: 2.88 kg
Lieske Part No.: 1441100

Continuous TPE sealing profile in black from the roll. Length: 15 m. Guaranteed in combination with the sealing optics and the sealing end caps protection class IP65 for the entire light strip system. Must not be cut into pieces over the entire length of the light strip. Dimensions: 15 mx 81 mm x 58 mm Weight: 4.32 kg
Lieske Part No.: 2089613

Continuous TPE sealing profile in black from the roll. Length: 20 m. Guaranteed in combination with the sealing optics and the sealing end caps protection class IP65 for the entire light strip system. Must not be cut into pieces over the entire length of the light strip. Dimensions: 20 mx 81 mm x 58 mm Weight: 5.76 kg
Lieske Part No.: 2089614

Continuous TPE sealing profile in black from the roll. Length: 25 m. Guaranteed in combination with the sealing optics and the sealing end caps protection class IP65 for the entire light strip system. Must not be cut into pieces over the entire length of the light strip. Dimensions: 25 mx 81 mm x 58 mm Weight: 7.2 kg
Lieske Part No.: 2089615

Continuous TPE sealing profile in black from the roll. Length: 30 m. Guaranteed in combination with the sealing optics and the sealing end caps protection class IP65 for the entire light strip system. Must not be cut into pieces over the entire length of the light strip. Dimensions: 30 mx 81 mm x 58 mm Weight: 8.64 kg
Lieske Part No.: 2089616

Continuous TPE sealing profile in black from the roll. Length: 35 m. Guaranteed in combination with the sealing optics and the sealing end caps protection class IP65 for the entire light strip system. May not be cut into pieces over the entire length of the light strip. Dimensions: 35 mx 81 mm x 58 mm Weight: 10.08 kg
Lieske Part No.: 2089617

Continuous TPE sealing profile in black from the roll. Length: 40 m. Guaranteed in combination with the sealing optics and the sealing end caps protection class IP65 for the entire light strip system. Must not be cut into pieces over the entire length of the light strip. Dimensions: 40 mx 81 mm x 58 mm Weight: 11.52 kg
Lieske Part No.: 2089618

Continuous TPE sealing profile in black from the roll. Length: 50 m. Guaranteed in combination with the sealing optics and the sealing end caps protection class IP65 for the entire light strip system. Must not be cut into pieces over the entire length of the light strip. Dimensions: 50 mx 81 mm x 58 mm Weight: 14.4 kg
Lieske Part No.: 2089619

Blank cover strips in length = 2000 mm for a clean appearance for interrupted light strips in white made of plastic polypropylene. Dimensions: 2000 x 67 x 14 mm. Weight: 0.27 kg.
Lieske Part No.: 2089631

Blank cover strips in length = 1500 mm for a clean appearance for interrupted light strips in white made of plastic polypropylene. Dimensions: 1500 x 67 x 14 mm. Weight: 0.2 kg.
Lieske Part No.: 2089630

Blank cover strip in length = 1000 mm for a clean appearance for interrupted light strips in white made of plastic polypropylene. Dimensions: 1000 x 67 x 14 mm. Weight: 0.14 kg.
Lieske Part No.: 2089629

7-pin cutting socket for flexible tapping between the specified socket spacings when wiring with 7 poles or 11 poles. Weight: 0.02 kg
Lieske Part No.: 2089652

Additional sealing grommets M16 for the end caps. 10 pcs. Weight: 0.03 kg
Lieske Part No.: 2089620

Wire holder (10 pieces). Weight: 0.03 kg
Lieske Part No.: 2089653

Optional strain relief plate for the connection cables. Weight: 0.03 kg
Lieske Part No.: 2089651

3-part assembly tool (carrying handle, roller for the sealing profile, roller for the sealing cover) for quick, easy and safe assembly of all components (through wiring, sealing profile, sealing cover) on the roll. Can be combined flexibly and used multiple times. Weight: 4.45 kg.
Lieske Part No.: 2089612

Mounting set in white for CLARIS evolution. Complete set for single light and the first light for light strip mounting. Consists of 1 ceiling canopy in white, 1 ceiling fastening element, 2 suspension cables in length 1200 mm white, 1 strain relief, 4 connection terminals, 1 transparent connection cable, 5x1.5mm2 (not halogen-free).
Lieske Part No.: 1104950

Mounting set in white for CLARIS evolution. Complete set for single light and the first light for light strip mounting. Consists of 1 ceiling canopy in white, 1 ceiling fastening element, 2 suspension cables in length 3100 mm white, 1 strain relief, 4 connection terminals, 1 transparent connection cable, 5x1.5mm2 (not halogen-free).
Lieske Part No.: 1104949

Black electrical feed made of profiled sheet steel for the electrical connection of the light strip. Plug-in connection terminals for 5 power cables, 2 x 2 emergency lighting cables and 2 control cables. Contact protection for current conducting profile and end caps included. Dimensions: 344 x 63 x 56 mm, weight: 0.68 kg
Lieske Part No.: 1104935

Support rail made of profiled sheet steel in black. 11 conductors embedded in an integrated current conducting profile. 5 power cables (5 x 2.5mm²/16A) and 2 x 2 conductors (4 x 1.5mm²/10A) for the integration of emergency lighting using two independently separated circuits and 2 conductors (2 x 1.5mm²/10A) as a control cable. Tool-free connection via electrical feed-in set. Dimensions: 4001 x 69 x 60 mm, weight: 6.9 kg
Lieske Part No.: 1104936

Socket element in black: 250mm long, fused with 6.3 amps. Weight: 0.25 kg
Lieske Part No.: 2090572

Cover strip for the mounting rail or cable duct made of plastic polypropylene in black. Dimensions: 1498 x 46 x 10 mm Weight: 0.1 kg
Lieske Part No.: 2090595

Cover strip for the mounting rail or cable duct made of plastic polypropylene in black. Dimensions: 1997 x 46 x 10 mm Weight: 0.14 kg
Lieske Part No.: 2090596

End caps made of polycarbonate (PC) in white for cover strips. For uninterrupted light strips, one pair of end caps is required per light strip. Weight: 0.1 kg per pair
Lieske Part No.: 2090592

End caps made of polycarbonate (PC) in silver for cover strips. For uninterrupted light strips, one pair of end caps is required per light strip. Weight: 0.1 kg per pair
Lieske Part No.: 2090591

End caps made of polycarbonate (PC) in black for cover strips. For uninterrupted light strips, one pair of end caps is required per light strip. Weight: 0.1 kg per pair
Lieske Part No.: 2090590