Versions in Accessories

Suspension bracket for rope suspensions, screw and nut included, Material: Aluminium
Standards: CE, RoHS
Dimensions (LxWxH): 25 x 24 x 20 mm
Weight: 0.013 kg
Lieske Part No.: 1056729

Double wire rope suspension (2 pieces) for Excis, material: sheet steel, easy screw mounting on luminaire and ceiling
Standards: CE, RoHS
Length: 2500 mm
Weight: 0.300 kg
Lieske Part No.: 1714648

Adapter for 3-phase power rail (suitable for wire rope suspension), housing made of polycarbonate, tensile load: max. 50 N, bending moment: max. 2.5 Nm, mechanical locking and phase selection, on/off switch, cable diameter: max. 7.5 mm
Standards: UKCA, CE, RoHS
Dimensions (LxWxH): 68 x 52 x 70 mm
Weight: 0.051 kg
Lieske Part No.: 2069739

MIDI MOUNTING PROFILE made of aluminium, black, similar to RAL 9005,
Lieske Part No.: 1778857

MIDI CORNER PROFILE made of aluminium, black, similar to RAL 9005,
Lieske Part No.: 1778856

MAXI CORNER PROFILE made of aluminium, black, similar to RAL 9005,
Lieske Part No.: 1778855

MIDI ACCESSORIES made of plastic, black,
Lieske Part No.: 1778839

MAXI ACCESSORIES made of plastic, black,
Lieske Part No.: 1778853

MIDI COVER made of plastic, PMMA cover satin finish,
Lieske Part No.: 1778868

MIDI COVER made of plastic, PMMA cover satin finish,
Lieske Part No.: 1778851

MAXI COVER made of plastic, PMMA cover satin finish,
Lieske Part No.: 1778850

MIDI ACCESSORIES made of aluminum, stainless steel,
Lieske Part No.: 1778849

Sales unit: 1 ST.
Lieske Part No.: 1955461

Sprengring für C 3830 und C 1830 Verkaufseinheit: 1 ST.
Lieske Part No.: 1244185

Luminaire for ceiling and wall mounting made of plastic with LEDs. Can be used in work pits for maintenance and repair work. Suitable for production facilities and suppliers in the food and beverage industry, work pits, underpasses, underground and suburban train stations and footbridges. Acid, alkali and fuel-resistant luminaire housing made of glass fiber reinforced plastic, similar to RAL 9010. Can be used indoors and outdoors in accordance with protection class IP 65 and IP 66. Lamp and equipment compartment thermally separated. Short sealing system consisting of age-resistant, dimensionally stable silicone/synthetic rubber. Lamp cover made of PMMA Transopal® (impact-resistant) or PC Tropal® (shatter-proof), with internal aluminum reflector (MIRO-SILVER®). Luminaire ready for installation and connection. Two M20 cable glands on the front and 4 x 1.5 mm² through-wiring. Built-in 230 V AC/DC control gear. 2 kV transient filter. Single or strip mounting. Ceiling, wall or corner mounting using two stainless steel mounting plates.
Lieske Part No.: 1780793

Spotlight with LED array. Can be used in industrial plants at different light point heights and, among other things, for illuminating buildings and advertising spaces and illuminating parking lots. Luminaire housing made of weatherproof and UV-resistant, glass fiber reinforced plastic and reflector housing made of die-cast aluminum, similar to RAL 9005. Reflector housing can be swiveled and locked by 90°. Lamp and device compartment thermally separated. Sealing system consisting of age-resistant, dimensionally stable silicone/synthetic rubber. Can be used indoors and outdoors in accordance with protection class IP 65. Protection class II. Cover pane made of single-pane safety glass (ESG) or PC (shatterproof), crystal clear with internal aluminum reflector (MIRO-SILVER®). Luminaire ready for installation and connection. Built-in operating device, supply voltage 230-240 V AC/DC. Two M20 cable membranes on the front. Two additional, concealed M20 cable membranes on the rear. Ceiling or wall mounting using an aluminum mounting bracket.
Lieske Part No.: 1894994

Spotlight with LED array. Can be used in industrial plants at different light point heights and, among other things, for illuminating buildings and advertising spaces and illuminating parking lots. Luminaire housing made of weatherproof and UV-resistant, glass fiber reinforced plastic and reflector housing made of die-cast aluminum, similar to RAL 9005. Reflector housing can be swiveled and locked by 90°. Lamp and device compartment thermally separated. Sealing system consisting of age-resistant, dimensionally stable silicone/synthetic rubber. Can be used indoors and outdoors in accordance with protection class IP 65. Protection class II. Cover pane made of single-pane safety glass (ESG) or PC (shatterproof), crystal clear with internal aluminum reflector (MIRO-SILVER®). Luminaire ready for installation and connection. Built-in operating device, supply voltage 230-240 V AC/DC. Two M20 cable membranes on the front. Two additional, concealed M20 cable membranes on the rear. Ceiling or wall mounting using an aluminum mounting bracket.
Lieske Part No.: 1956023

Spotlight with LED array. Can be used in industrial plants at different light point heights and, among other things, for illuminating buildings and advertising spaces and illuminating parking lots. Luminaire housing made of weatherproof and UV-resistant, glass fiber reinforced plastic and reflector housing made of die-cast aluminum, similar to RAL 9005. Reflector housing can be swiveled and locked by 90°. Lamp and device compartment thermally separated. Sealing system consisting of age-resistant, dimensionally stable silicone/synthetic rubber. Can be used indoors and outdoors in accordance with protection class IP 65. Protection class II. Cover pane made of single-pane safety glass (ESG) or PC (shatterproof), crystal clear with internal aluminum reflector (MIRO-SILVER®). Luminaire ready for installation and connection. Built-in operating device, supply voltage 230-240 V AC/DC. Two M20 cable membranes on the front. Two additional, concealed M20 cable membranes on the rear. Ceiling or wall mounting using an aluminum mounting bracket.
Lieske Part No.: 1956024

Mounting hardware for easy mounting to existing installations (no new screw holes required). Accessory product of the Apollo.
Sales unit: 3 pieces
Lieske Part No.: 1053133

Mounting hardware for easy mounting to existing installations (no new screw holes required). Apollo accessory product.
Sales unit: 2 pieces
Lieske Part No.: 1593877

Suspension set, accessory product of the Slim Panel Basic G2.
Lieske Part No.: 2070767

Installation springs, accessory product of the Slim Panel Basic G2 Sq595/Sq620.
Lieske Part No.: 2092032

Accessory product of the Slim Panel Performer. Emergency lighting luggage.
Lieske Part No.: 1594027

Accessory product of the Slim Panel Performer. Emergency lighting luggage.
Lieske Part No.: 1594026

Accessory product of the trunking quick mounting light strip. Cover sensor.
Lieske Part No.: 1598772

Accessory product for the Trunking quick-mount light strip. End feed.
Lieske Part No.: 1048541

Accessory product for the Trunking quick-mount light strip. Feed-in.
Lieske Part No.: 1048681

Accessory product of the Trunking quick-mount light strip. End plate.
Lieske Part No.: 1048694

Accessory product of the Trunking quick-mount light strip. Chain hanger.
Lieske Part No.: 1048693

Accessory product for the Trunking quick-assembly light strip. Rope suspension.
Lieske Part No.: 2090747

Accessory product for the Trunking quick-mount light strip. Ceiling mounting.
Lieske Part No.: 2090752

Accessory product for the Trunking quick-mount light strip. Cable gland.
Lieske Part No.: 1048692

Ceiling mounting frame, accessory product of the Slim Panel family. Ceiling cut-out: 620 x 620 mm.
Lieske Part No.: 1780060

Ceiling mounting frame, accessory product of the Slim Panel family. Ceiling cut-out: 646 x 646 mm.
Lieske Part No.: 1780075

Ceiling mounting frame, accessory product of the Slim Panel family. Ceiling cut-out: 1212 x 320 mm.
Lieske Part No.: 1780061

Accessory product of the Trunking quick-mount light strip. End plate.
Lieske Part No.: 1594025

Feed-in box, accessory product of the Trunking quick-mounting light strip.
Lieske Part No.: 2091472

Mounting frame kit, accessory product of the Slim Panel family.
Lieske Part No.: 1780073

Mounting frame kit, accessory product of the Slim Panel family.
Lieske Part No.: 1780072

Mounting frame kit, accessory product of the Slim Panel family.
Lieske Part No.: 1780071

Lieske Part No.: 1055554

Hanging kit, accessory product for Slim Panel Performer.
Lieske Part No.: 680225

Connector kit. IP 68 accessories.
Lieske Part No.: 2092040

Accessory product of the Highbay Performer G4 80W/115W.
Lieske Part No.: 2091475

Optional mounting brackets for Highbay Ecomax.
Lieske Part No.: 2093268

Smart Sensor Module. NEW: also available for our Smart Lighting solution (BLE).
Lieske Part No.: 1714252

Hanging kit with transparent cable, accessory product for Lima. Hanging length 1.5 m.
Lieske Part No.: 1003677

Ground spike for LED spotlights, serves for easy installation of the lights by simply inserting them into the ground with the spike.
Lieske Part No.: 2093039

Cross-braced frames for surface mounting of panel lights. Product features: Frame made of extruded aluminum. Product advantages: Ready to install thanks to pre-assembled magnetic corners. Cross bracing for increased stability.
Lieske Part No.: 1349977

Suspension set for DALI pendant light. Product features: Complete suspension set (junction box, 2 plug connections, suspension steel cables and transparent cable). Screwless plug connection for a quick and easy electrical connection. Adjustable steel cables, maximum length of each: 1.5 m. Junction box in the color of the light made of powder-coated steel, with screwless plug terminal. Connection with 5-pin double plug connection terminal. Product advantages: Complete suspension set for quick and easy installation of a light. Steel cable length adjustable thanks to quick-release clamp.
Lieske Part No.: 1263473