Starter holder material: PC, white, T110, nominal value: 2/250 Single plug-in terminals: 0.5-1qmm, single-wire Rear split pins for wall thickness up to 1.2mm Side split pins for wall thickness up to 1mm Split pin connection starter holder rear/luminaire body: IP40 Weight: 3.7g Type: 43210 Mounting type: plug-in mounting Socket: other Material: plastic Version: plug-in socket Color: white With starter holder: yes
Lieske Part No.: 303849

Edison sockets E
4 thermoplastic sockets rated value 2/25, flumes coat sleeve lock E
4 candles versions rated value 2/25, foot galvanized nipple with thread M
x
Model: height 65 mm type:
98
3 item:
ST.
Lieske Part No.: 875231

Edison lampholders
E14 thermoplastic lampholders
rated value 2/250, flumes coat sleeve lock
E 14 candles versions
rated value 2/250, foot galvanized nipple with thread M 10 x 1
Model: height 85 mm type: 109814


Quantity: 1 unit.
Lieske Part No.: 599443

Edison sockets E
4 thermoplastic sockets rated value 2/25, flumes coat sleeve lock E
4 candles versions rated value 2/25, foot galvanized nipple with thread M
x
Model: height
mm Type:
98
5 item:
ST.
Lieske Part No.: 806245

Socket terminals Material: Porcelain Socket: E27 Color: white
Lieske Part No.: 599891

SP 230/10 K luminaire protection module
For electronic control gear
When operating electronic components in lighting, it is often necessary to provide increased protection for the components against voltage peaks.
These overvoltages, also known as transients, can have a variety of causes.
They can occur when switching inductive loads or through atmospheric discharges such as lightning strikes in the network or soil.
They can also be caused by induced voltages from neighboring cables in phase control.
The protection module reduces the overvoltage at the connection terminal of the electronic components. The remaining residual voltage is reduced to an appropriate protection level
depending on the discharge current . Max. permissible housing temperature: 80°C Min. permissible ambient temperature: -30 °C Suitable for luminaires of protection class II Dimensions: 32 x 22 x 13 mm Weight: 20 g Connection: wires, solid, length: 50 mm
Lieske Part No.: 340509

Lieske Part No.: 1087064

Partially covered G4 socket Housing: PPS, black, T240 Nominal value: 4/24 Multi-point contacts: Cu NiZn Cables: Cu tinned, multi-wire 0.75qmm Si insulation, max. 180°C, length: 140mm Through holes for M3 screws Weight: 5.8g Type: 30400 Color: black Nipple thread: none Material: plastic Fastening type: plug-in fastening Socket: G4/G6.35 Version: Edison socket With starter holder: No
Lieske Part No.: 663813

E27 illumination sockets Standard cover with one-way screw For lamps max. 40Wm Material: PBT GF, black Nominal value: 4/250 Cutting contacts for illumination cable H05RN H2-F 2x1.5 Only to be used with protective cover Weight: 17 g Type: 83297 Fastening type: Screw fastening Material: Plastic Socket: E27 Color: black With starter holder: No Design: Illumination socket
Sales unit: 50 pieces
Lieske Part No.: 920709

E27 illumination sockets Cover with through holes for M4 screws, with one-way screws For lamps max. 40Wm Material: PBT GF, black Nominal value: 4/250 Cutting contacts for illumination cable H05RN H2-F 2X1.5 Only to be used with protective cover Weight: 17.5g Type: 83297, Mounting type: screw fastening, nipple thread: other, Material: plastic, Socket: E27, Color: black, With starter holder: No, Design: illumination socket
Sales unit: 50 pieces
Lieske Part No.: 1311615

Lamp holder for lamps D16mm Material: PC, white, UV-stabilized Insert foot for cutout D5, 5mm Weight: 1g Type: 84001, Material: Plastic, Design: Connection element and socket, Socket: G5, Color: white, With starter holder: No
Lieske Part No.: 843806

E27 sockets, for plug-on caps, smooth casing, black Housing: PET GF, T210 Nominal value: 4/250 Double plug-in terminals: 0.5-2.5qmm Through holes for M4 screws Weight: 17.4g Type: 64401, With starter holder: No Material: Plastic Socket: E27 Color: black Fastening type: Screw fastening Design: Edison socket
Lieske Part No.: 1316095

Caps for G9 socket 502004m Material: LCP, natural External thread 28x2 IEC 60399 Mounting holes for screws M3 Weight: 4.6g Molded thread: M10x1 Type: 97268 Nipple thread: other Socket: other Material: plastic Design: connection element and socket Color: white
Lieske Part No.: 673708

G9 socket housing: ceramic, cover plate: LCP, natural T270, nominal value: 2/250 double plug-in terminals for multi-wire cables with wire end ferrule D1, 4-1.8mm through holes for M3 screws weight: 14.4g type: 33500, design: connection element and socket, fastening type: screw fastening, socket: other, material: ceramic, color: white, with starter holder: no
Lieske Part No.: 176641

Snap-on caps for sockets 502111/502112 External thread 32x2m Material: LCP, natural Type: 97320 Weight: 6g Molded thread: M10x1 Design: Connection element and socket Material: Plastic Nipple thread: Other Socket: Other With starter holder: No Color: white
Lieske Part No.: 461137

Lampholders for mains voltage halogen lamps
GU / GZ 10 versions
Push-in twin terminals, through-holes for screws M3
Model: GU / GZ 10 version

Type: 502111
Quantity: 1 unit.
Lieske Part No.: 121900

G8.5 sockets Single plug-in terminals for multi-wire cables with wire end ferrules Through holes for M3 screws Type: 33600 Housing: LCP, black, T270 Weight: 5g, Mounting type: screw mounting, Socket: other, Material: plastic, Design: plug-in socket, Color: black, With starter holder: No
Lieske Part No.: 704079

Screw ring for products with external thread 32x2 D38.9mm, height: 7.5mm Material: PPS, black Weight: 2.3g Type: 97282, Material: plastic, Color: black, Type of accessory: screw ring
Lieske Part No.: 969544

Screw ring for products with external thread 28x2m Material: PPS, black D34mm, Height: 7.5mm Weight: 1.9g Type: 05202, Design: other, Socket: other, Color: black, Nipple thread: without, Material: plastic, With starter holder: No
Lieske Part No.: 534779

G24q-3/GX24q-3 sockets External thread 40x2.5 IEC 60399 Housing: PBT GF, white, T140, Nominal value: 2/500 Double plug-in terminals: 0.5-1qmm (lamp circuit) Single plug-in terminals: 0.5-1qmm (starter circuit) Front through holes for M3 screws Central through hole for M3 screw Anti-twist cams For push-on caps For screw rings, Design: screw socket, Fastening type: screw fastening, Material: plastic, Socket: other, Color: white, With starter holder: No
Lieske Part No.: 611366

E27 socket For luminaires of protection class II Profiled, smooth Inclination of the lamp axis: 3°, Material: Plastic, Socket: E27, Design: Edison socket, Fastening type: Screw fastening, With starter holder: No, Color: white
Lieske Part No.: 640891

Back St3, 9 LPH 21mm, Type of accessory: spacer
Lieske Part No.: 577458

E27 sockets, one-piece, for push-on caps Profiled, external thread 40x2.5 IEC 60399 Housing: PET GF, T210, Nominal value: 4/250 Double plug-in terminals: 0.5-2.5qmm Through holes for M3 screws Holes on the back for self-tapping screws in accordance with ISO 1481/7049-ST3, 9-C/F Weight: 14.9g Type: 64719, black, Color: black Socket: E27 Material: Plastic Fastening type: Screw fastening Design: Edison socket With starter holder: No,
Lieske Part No.: 429624

E27 sockets white, one-piece, for push-on caps Profiled, external thread 40x2.5 IEC 60399 Housing: PET GF, T210, Nominal value: 4/250 Double plug-in terminals: 0.5-2.5qmm Through holes for M3 screws Holes on the back for self-tapping screws in accordance with ISO 1481/7049-ST3, 9-C/F Weight: 14.8g Type: 64719, Material: Plastic Socket: E27 Fastening type: Screw fastening Design: Edison socket Color: white With starter holder: No
Lieske Part No.: 456498

GU10, GZ10 sockets For lamps of protection class II Housing: LCP, natural, T270, nominal value: 2/250 Cables: Cu nickel-plated, multi-wire 0.75qmm, double PTFE insulation, length: 150mm Through holes for M3 screws Weight: 12.6g Type: 31020 Fastening type: screw fastening Design: connection element and socket Socket: other Material: plastic Color: white With starter holder: No
Lieske Part No.: 691584

Strain relief/cover for GX53-1 sockets For cables H03VVH2-F 2x0.75, tinned cable ends For luminaires of protection class IImAterial: PC, white Weight: 1.6g Type: 97278, Socket: other, Material: plastic, Design: connection element and socket, Color: white, With starter holder: No
Lieske Part No.: 802543

Encased PG12-1 socket for push-on caps Housing: PPS, black, T220 Nominal value: 4/500/5kV, Contacts: CrNi Single plug-in terminals for cables with wire end ferrules max. D1.8mm or for tinned cable ends: 0.5-1qmm Through holes for M3 screws Weight: 23g Height: 15mm Type: 31980, Fastening type: screw fastening, Color: black, Design: plug-in socket, Socket: other, Material: plastic, With starter holder: No
Lieske Part No.: 871383

Encased PG12-1 socket Housing: PPS, black, T220 Nominal value: 4/500/5kV, Contacts: CrNi Single plug-in terminals for cables with wire end ferrules max. D1, 8mm or for tinned cable ends: 0.5-1qmm Fastening holes for M4 screws Weight: 20.2g Height: 17mm Type: 31981 Color: black, Design: plug-in socket Socket: other Material: plastic Fastening type: screw fastening With starter holder: No
Lieske Part No.: 379402

PG12-2 socket Housing: PPS, black, T220 Nominal value: 4/500/5kV, Contacts: CrNi Single plug-in terminals for cables with wire end ferrules max. D1, 8mm or for tinned cable ends: 0.5-1qmm Mounting holes for M4 screws Weight: 23g Height 17mm Type: 31983, Color: black, Design: plug-in socket, Material: plastic, Socket: other, Mounting type: screw mounting, With starter holder: No
Lieske Part No.: 189140

Encased PG12-3 socket Housing: PPS, black, T220 Nominal value: 4/500/5kV, Contacts: CrNi Single plug-in terminals for cables with wire end ferrules max. D1, 8mm or for tinned cable ends: 0.5-1qmm Mounting holes for M4 screws Weight: 20.2g Height 17mm Type: 31985, Material: Plastic, Socket: other, Design: Plug-in socket, Color: black, Mounting type: Screw mounting, With starter holder: No
Lieske Part No.: 682365

Coupling for extending pre-assembled connecting cables Type: WU-VB-KP-1-1, Suitable for: other, Type: other, With screw connectors: No
Lieske Part No.: 346807

Type WU-VB-BU-6m Material: PBT GF The connector creates a locking and polarity-protected connection between the cable and LED system components. The connection to the cable is made via insulation displacement contacts. Since the connector can be mounted at any point on the cable, a very flexible system topology is possible. not assembled, design: plug
Lieske Part No.: 478603

E27 sockets for discharge lamps, for plug-on caps PET GF, black, T210 profiled, external thread 40x2.5 IEC 60399 Nominal value: 4/250/5 kV Double plug-in terminals: 0.5-2.5qmm Through holes for M3 screws Holes on the back for self-tapping screws in accordance with ISO 1481/7049-ST3, 9-C/F Weight: 15g Type: 64719, With starter holder: No, Design: Plug-in socket, Color: black, Socket: E27, Material: Plastic, Fastening type: Screw fastening,
Lieske Part No.: 583061

G5 built-in socket Housing: PBT GF, white, Rotor: PBT GF, white T140, Nominal value: 2/500 Double plug-in terminals: 0.5-1qmm Lateral locking lugs Weight: 2.8g Type: 09404, Material: Plastic, Socket: G5, Fastening type: Plug-in fastening, Design: Built-in socket, With starter holder: No, Color: white
Lieske Part No.: 655839

G5 built-in sockets Housing: PBT GF, white, Rotor: PBT GF, white T140, Nominal value: 2/500 Double plug-in terminals: 0.5-1qmm Rear split pins for wall thickness up to 1.2mm Weight: 2.9g Type: 09405 Design: Built-in socket Mounting type: Plug-in mounting Socket: G5 Material: Plastic With starter holder: No Color: white
Lieske Part No.: 112047

G5 built-in sockets Housing: PBT GF, white, Rotor: PBT GF, white T140, Nominal value: 2/500 Double plug-in terminals: 0.5-1qmm Rear split pins for wall thickness up to 1.2mm with spring-loaded length compensation Weight: 3.3g Type: 09406 Mounting: G5 Mounting type: Plug-in mounting Design: Built-in socket Material: Plastic Color: white With starter holder: No
Lieske Part No.: 367618

G5 built-in sockets Housing: PBT GF, white, Rotor: PBT GF, white T140, Nominal value: 2/500 Double plug-in terminals: 0.5-1qmm Rear split pins for wall thickness up to 1.2mm Weight: 2.9g Type: 09415, Design: Built-in socket, Fastening type: Plug-in fastening, Socket: G5, Material: Plastic, Color: white, With starter holder: No
Lieske Part No.: 915745

G5 push-through sockets Housing: PBT GF, white, Rotor: PBT GF, white T140, Nominal value: 2/500, Light point height: 15mm Double plug-in terminals: 0.5-1qmm Side locking lugs for wall thickness 0.5-1.5mm with cam Weight: 3.5g with cam Type: 09420, Material: Plastic, Design: Push-through socket, Mounting type: Plug-in mounting, Socket: G5, Color: white, With starter holder: No
Lieske Part No.: 300212

G5 push-through sockets Housing: PBT GF, white, Rotor: PBT GF, white T140, Nominal value: 2/500, Light point height: 15mm Double plug-in terminals: 0.5-1qmm Side locking lugs for wall thickness 0.5-1.5mm without cams Weight: 3.4g Type: 09421, Material: Plastic, Fastening type: Plug-in fastening, Design: Push-through socket, Socket: G5, Color: white, With starter holder: No
Lieske Part No.: 427730

G5 plug-in socket Light point height: 14mm Housing: PBT GF, white, Rotor: PBT GF, white T140, Nominal value: 2/500 Double plug-in terminals: 0.5-1qmm Rear locking lug for wall thickness 0.6-1mm Cable routing underneath or to the side Weight: 3.3g Type: 09440, Color: white, Design: Plug-in socket, Material: Plastic, Mounting type: Plug-in mounting, Socket: G5, With starter holder: No
Lieske Part No.: 239270

G5 plug-in socket Light point height: 15mm Housing: PBT GF, white, Rotor: PBT GF, white T140, Nominal value: 2/500 Double plug-in terminals: 0.5-1qmm Bottom split pins for wall thickness 0.6-1mm Weight: 3.4g Type: 09450, Design: Plug-in socket Material: Plastic Socket: G5 Mounting type: Plug-in mounting With starter holder: No Color: white
Lieske Part No.: 362552

Snap-on cap for G9 socket 502004m Material: LCP, natural External thread 28x2 IEC 60399 Mounting holes for screws M3 Nipple thread: M10x1, aluminum, white for E14 screw ring Weight: 8.7g Type: 83310, Socket: other, Material: plastic, Design: connection element and socket, Color: white
Lieske Part No.: 414504

E14 sockets, for push-on caps Profiled, short external thread 28x2 IEC 60399 Housing: PET GF, T210, black Nominal value: 2/250 Double plug-in terminals: 0.5-1.5qmm Mounting holes on the back for self-tapping screws in accordance with ISO 1481/7049-ST2, 9-C/F Weight: 7.7g Type: 64370 With starter holder: No Color: black, Material: plastic Socket: E14 Design: Edison socket Mounting type: screw fastening
Lieske Part No.: 365573

E14 sockets, white Profiled, short external thread 28x2 IEC 60399 Housing: PET GF, T210, Nominal value: 2/250 Double plug-in terminals: 0.5-1.5qmm For clipping in Weight: 6.6g Type: 64360 Design: Edison socket Fastening type: Plug-in fastening Socket: E14 Material: Plastic Color: white With starter holder: No
Lieske Part No.: 205086

E14 sockets, black profiled, short external thread 28x2 IEC 60399 Housing: PET GF, T210, Nominal value: 2/250 Double plug-in terminals: 0.5-1.5qmm For clipping in Weight: 6.8g Type: 64360, Design: Edison socket, Fastening type: Plug-in fastening, Color: black, Socket: E14, Material: Plastic, With starter holder: No
Lieske Part No.: 973509

Screw rings For products with external thread 20.8x2 Weight: 1.4g Type: 97257 LCP, natural Color: other Material: plastic Socket: GX5.3 Fastening type: screw fastening Design: connection element and socket With starter holder: No
Lieske Part No.: 115964

Insert bracket for two G5 recessed sockets 505732mMaterial: PC, white Light point height: 20mm Light point spacing: 24mm Insert foot for wall thickness 0.5-1mm Weight: 3.5g Type: 97677, Material: Plastic, Nipple thread: without, Socket: G5, Fastening type: Plug-in fastening, Design: recessed socket, Color: white, With starter holder: No
Lieske Part No.: 537693

G5 built-in/plug-in socket Light point height: 11.8mm Housing: PBT GF, white, Rotor: PBT GF, white T140, Nominal value: 2/500 Double plug-in terminals: 0.5-1qmm Rear split pins for wall thickness up to 1.2mm Bottom split pins for wall thickness up to 1mm Cable routing on the side Weight: 3.2g Type: 09465, With starter holder: No, Material: Plastic, Socket: G5, Design: Built-in socket, Fastening type: Plug-in fastening, Color: white
Lieske Part No.: 1315359

Screw ring
For products with external thread 28x2
Material: LCP, natural
Ø 34 mm, height: 7.5 mm
Weight: 1.9 g
Type: 05202
Lieske Part No.: 997217

Caps for G9 sockets Type 337 Bayonet fastening Material: PPS, black Weight: 2.5g Type: 97359 Moulded thread: M10x1 Material: Plastic Socket: other Colour: black Fastening type: screw fastening Design: connection element and socket Nipple thread: M10x1 With starter holder: No
Lieske Part No.: 613488