Installation Material from HellermannTyton

The high shrink ratio TF31 of Permits to shrink-large diameter differences. Only six sizes cover cable Diameters from 1mm to 33mm, so did a reduced procurement costs and reduced space requirement results. TF31 is so Characterized by good fire-protection properties and is UL . approved RV1 . The rolls of 30m are particularly suitable for the average needs Type: TF31-9/3 item: 30 MTR
Sales unit: 30 meters
Lieske Part No.: 161045

Type: TF34-9/3 PEX CL 30 M
Sales unit: 30 MTR
Sales unit: 60 meters
Lieske Part No.: 985522

Type: TF31-9/3-YE
Sales unit: 30 MTR
Sales unit: 30 meters
Lieske Part No.: 821537

Dünnwandig: flexibel, leicht, platzsparend. 3:1 deckt größeren Anwendungsbereich ab, erhöhter Anpressdruck. Sehr gute Brandschutzeigenschaften. Schnell schrumpfend. Niedrige Schrumpftemperatur. Große Vielfalt an Farben und Größen. TF31 findet dort Verwendung, wo erhöhte Anforderungen an den Brandschutz gestellt werden. Er kann zur Isolierung und Ummantelung von Kabeln und Leitungen verwendet werden. Verkaufseinheit: 30 MTR
Sales unit: 30 meters
Lieske Part No.: 500225

Type: TF31-9/3 30 M BU PEX item: 30 MTR
Sales unit: 30 meters
Lieske Part No.: 252076

Quantity: 30 MTR
Sales unit: 30 meters
Lieske Part No.: 938487

Thin-walled: flexible, lightweight, space-saving. 3:1 covers a larger application area, increased contact pressure. Very good fire protection properties. Fast shrinking. Low shrink temperature. Wide variety of colors and sizes. TF31 is used where increased fire protection requirements are required. It can be used for insulating and sheathing cables and lines.
Sales unit: 30 meters
Lieske Part No.: 2056042

Type: TF31-12/4-BK-30M
Sales unit: 30 MTR
Sales unit: 30 meters
Lieske Part No.: 797607

Quantity: 30 MTR
Sales unit: 30 meters
Lieske Part No.: 472408

The highly flexible, halogen-free heat-shrink tubing TF34 has very good insulating properties. TF34 is optimal for protecting identification solutions, as the hose remains transparent even after complete shrinkage.
Type: TF34-12 / 4-CL
Quantity: 30 MTR
Sales unit: 60 meters
Lieske Part No.: 353148

The high shrink ratio of TF31 it possible to shrink-large differences in diameter.
Typical applications include the isolation and identification of cables and wires, and protection against duty harnesses. Inventory can be reduced significantly as only a few sizes cover a wide number of cable diameters.
Type: TF31-12 / 4-YE
Quantity: 30 MTR
Sales unit: 30 meters
Lieske Part No.: 564677

Sales unit: 1 MTR
Sales unit: 30 meters
Lieske Part No.: 197720

Thin-walled: flexible, lightweight, space-saving. 3:1 covers a larger application area, increased contact pressure. Very good fire protection properties. Fast shrinking. Low shrink temperature. Wide variety of colors and sizes. TF31 is used where increased fire protection requirements are required. It can be used for insulating and sheathing cables and lines.
Sales unit: 30 meters
Lieske Part No.: 1324301

Type: TF31-12/4 PEX 30 M
Sales unit: 30 MTR
Sales unit: 30 meters
Lieske Part No.: 456000

Type: TF31-12/4 PEX WH 30 M
Sales unit: 30 MTR
Sales unit: 30 meters
Lieske Part No.: 735091

The high shrink ratio of TF31 it possible to shrink-large diameter differences. But six sizes cover cable diameters from 1mm to 33mm, so that a reduced procurement costs and reduced space requirement results. TF31 is also characterized by very good fire protection properties and is approved according to UL VW1. The rolls of 30m are particularly suitable for the average needs.
Type: TF31-18 / 6-BK-30M
Quantity: 30 MTR
Sales unit: 30 meters
Lieske Part No.: 996550

Quantity: 30 MTR
Sales unit: 30 meters
Lieske Part No.: 472420

Type: TF34-18 / 6 PEX CL 30 M sales unit: 1 MTR
Sales unit: 60 meters
Lieske Part No.: 166467

The high shrink ratio of TF31 it possible to shrink-large diameter differences.
Typical applications include the isolation and identification of cables and wires, and protection against duty harnesses. Inventory can be reduced significantly as only a few sizes cover a wide number of cable diameters.
Type: TF31-18 / 6-YE
Quantity: 30 MTR
Sales unit: 30 meters
Lieske Part No.: 184105

Sales unit: 1 MTR
Sales unit: 30 meters
Lieske Part No.: 197527

Thin-walled: flexible, lightweight, space-saving. 3:1 covers a larger application area, increased contact pressure. Very good fire protection properties. Fast shrinking. Low shrink temperature. Wide variety of colors and sizes. TF31 is used where increased fire protection requirements are required. It can be used for insulating and sheathing cables and lines.
Sales unit: 30 meters
Lieske Part No.: 2056043

Thin-walled: flexible, lightweight, space-saving. 3:1 covers a larger application area, increased contact pressure. Very good fire protection properties. Fast shrinking. Low shrink temperature. Wide variety of colors and sizes. TF31 is used where increased fire protection requirements are required. It can be used for insulating and sheathing cables and lines.
Sales unit: 30 meters
Lieske Part No.: 1241688

Thin-walled: flexible, lightweight, space-saving. 3:1 covers a larger application area, increased contact pressure. Very good fire protection properties. Fast shrinking. Low shrink temperature. Wide variety of colors and sizes. TF31 is used where increased fire protection requirements are required. It can be used for insulating and sheathing cables and lines.
Sales unit: 30 meters
Lieske Part No.: 2056044

Type: TF31-24/8 PEX BK 30 M
Sales unit: 30 MTR
Sales unit: 30 meters
Lieske Part No.: 762743

Sales unit: 1 MTR
Sales unit: 30 meters
Lieske Part No.: 197410

The highly flexible, halogen free heat shrink tubing TF34 provides very good insulation. TF34 is ideal for the protection of identification solutions, because the hose remains transparent even after complete shrinkage. Type: TF34-24 / 8-CL item: 30 MTR
Sales unit: 60 meters
Lieske Part No.: 777116

Quantity: 30 MTR
Sales unit: 30 meters
Lieske Part No.: 197391

The high shrink ratio of TF31 it possible to shrink-large differences in diameter.
Typical applications include the isolation and identification of cables and wires, and protection against duty harnesses. Inventory can be reduced significantly as only a few sizes cover a wide number of cable diameters.
Type: TF31-24 / 8-GN
Quantity: 30 MTR
Sales unit: 30 meters
Lieske Part No.: 497770

Type: TF31-24/8-BU
Sales unit: 30 MTR
Sales unit: 30 meters
Lieske Part No.: 900489

Type: TF31-24 / 8 PEX 30 M item: 30 MTR
Sales unit: 30 meters
Lieske Part No.: 524208

Thin-walled: flexible, lightweight, space-saving. 3:1 covers a larger application area, increased contact pressure. Very good fire protection properties. Fast shrinking. Low shrink temperature. Wide variety of colors and sizes. TF31 is used where increased fire protection requirements are required. It can be used for insulating and sheathing cables and lines.
Sales unit: 30 meters
Lieske Part No.: 2056045

The high shrink ratio TF31 of permits for shrink to large differences in diameter. Only six sizes cover cable diameter from 1mm to 33mm, so that a reduced procurement costs and reduced space requirement. TF31 is also characterized by very good fire protection properties and is UL approved RV1. The roles of 30m are particularly suitable for the average needs. Type: TF31-40 / 13-BK-30M item: 30 MTR
Sales unit: 30 meters
Lieske Part No.: 713043

The high shrink ratio TF31 of permits for shrink to large differences in diameter. Typical applications include, among others, the isolation and identification of wires and cables, and protection against light duty harnesses. Inventory can be reduced significantly as only a few sizes cover a wide number of cable diameters. Type: TF31-40 / 13 RD-item: 30 MTR
Sales unit: 30 meters
Lieske Part No.: 817183

Type: TF34-40/13 PEX CL 30 M
Sales unit: 30 MTR
Sales unit: 30 meters
Lieske Part No.: 851297

Type: TF31-40/13 PEX YE 30 M
Sales unit: 30 MTR
Sales unit: 30 meters
Lieske Part No.: 925263

Type: TF31-40/13 PEX GN 30 M
Sales unit: 30 MTR
Sales unit: 30 meters
Lieske Part No.: 679387

The high shrink ratio of TF31 it possible to shrink-large differences in diameter.
Typical applications include the isolation and identification of cables and wires, and protection against duty harnesses. Inventory can be reduced significantly as only a few sizes cover a wide number of cable diameters.
Type: TF31-40 / 13-BU
Quantity: 30 MTR
Sales unit: 30 meters
Lieske Part No.: 658827

Type: TF31-40/13 PEX 30 M
Sales unit: 30 MTR
Sales unit: 30 meters
Lieske Part No.: 163778

Type: TF31-40/13 PEX WH 30 M
Sales unit: 30 MTR
Sales unit: 30 meters
Lieske Part No.: 157809

Type: TF31-3/1 PEX BK 150 M
Sales unit: 150 MTR
Sales unit: 150 meters
Lieske Part No.: 988609

Type: TF31-6/2-BK
Sales unit: 150 MTR
Sales unit: 150 meters
Lieske Part No.: 455332

The high shrink ratio TF31 of permits for shrink to large differences in diameter. Typical applications include, among others, the isolation and identification of wires and cables, and protection against light duty harnesses. Inventory can be reduced significantly as only a few sizes cover a wide number of cable diameters. Type: TF31-18 / 6-BK item: 60 MTR
Sales unit: 60 meters
Lieske Part No.: 720933

Quantity: 60 MTR
Sales unit: 60 meters
Lieske Part No.: 910259

Type: TFE2-30-1220-PTFE-CL
Sales unit: 50 pc
Sales unit: 50 pieces
Lieske Part No.: 949548

Type: TFE2-28-1220-PTFE-CL
Sales unit: 50 pc
Sales unit: 50 pieces
Lieske Part No.: 795317

Thin-walled: lightweight, space-saving. Extreme mechanical and chemical resistance at very high temperatures. Very smooth PTFE surface ensures good sliding properties and easy cleaning. TFE2 and TFE4 offer excellent sliding properties coupled with exceptional chemical resistance and a very high operating temperature.
Sales unit: 200 pieces
Lieske Part No.: 1581159

Thin-walled: lightweight, space-saving. Extreme mechanical and chemical resistance at very high temperatures. Very smooth PTFE surface ensures good sliding properties and easy cleaning. TFE2 and TFE4 offer excellent sliding properties coupled with exceptional chemical resistance and a very high operating temperature.
Sales unit: 100 pieces
Lieske Part No.: 562150

Thin-walled: lightweight, space-saving. Extreme mechanical and chemical resistance at very high temperatures. Very smooth PTFE surface ensures good sliding properties and easy cleaning. TFE2 and TFE4 offer excellent sliding properties coupled with exceptional chemical resistance and a very high operating temperature.
Sales unit: 50 pieces
Lieske Part No.: 786736

Thin-walled: lightweight, space-saving. Extreme mechanical and chemical resistance at very high temperatures. Very smooth PTFE surface ensures good sliding properties and easy cleaning. TFE2 and TFE4 offer excellent sliding properties coupled with exceptional chemical resistance and a very high operating temperature.
Sales unit: 100 pieces
Lieske Part No.: 1425856

Type: TFE2-14-1220-PTFE-CL
Sales unit: 50 pc
Sales unit: 50 pieces
Lieske Part No.: 799499