Installation Material from HellermannTyton

Low profile design for applications where space is limited. Self-adhesive bases for quick and easy installation. Used without additional cable ties. Offers potential for process optimization. Various sizes available for different bundle diameters. Cost-effective solution and easy installation. Suitable for applications on smooth, clean surfaces. The RB series self-adhesive bases offer greater routing freedom and reduce the risk of corrosion compared to screw fastenings. They are ideal for tool-free installation and can be reopened and reused. This is especially useful when bundles need to be replaced quickly and easily. The RB series can be used without cable ties and offers process optimization potential for a wide range of applications.
Sales unit: 1000 pieces
Lieske Part No.: 982589

Sales Unit: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 176044

Low profile design for applications where space is limited. Self-adhesive bases for quick and easy installation. Used without additional cable ties. Offers potential for process optimization. Various sizes available for different bundle diameters. Cost-effective solution and easy installation. Suitable for applications on smooth, clean surfaces. The RB series self-adhesive bases offer greater routing freedom and reduce the risk of corrosion compared to screw fastenings. They are ideal for tool-free installation and can be reopened and reused. This is especially useful when bundles need to be replaced quickly and easily. The RB series can be used without cable ties and offers process optimization potential for a wide range of applications.
Sales unit: 50 pieces
Lieske Part No.: 1135033

Type: RB5 PA66 NA 100 ST
Sales unit: 100 pc
Sales unit: 100 pieces
Lieske Part No.: 383433

Type: RB8-N66-NA-H1
Sales unit: 5000 pc
Sales unit: 5000 pieces
Lieske Part No.: 825153

Type: CTC10FT6-HIRHS-BK-D1
Sales unit: 5000 pc
Sales unit: 500 pieces
Lieske Part No.: 565634

Type: CTC7.5FT6LG-HIRHS-BK
Sales unit: 500 pc
Sales unit: 500 pieces
Lieske Part No.: 523737

Ribbon cable Self-adhesive holder, halogen-free
, the FKH-Series is available in four different sizes
available can with tape an d also
be attached to a M3 screw. By the
simple clip method, can the holder
quickly and easily open and close again.
's flexible wings provide gentle
attachment of the cable. Damage
be prevented. material properties: Material: Polyamide 6.6 High Impact Modified



Color: black
Operating temp. -40 ° C to +85 ° C, intermittent +105 ° C (for 500 h)
Design: For flat cables up to 25 mm Type: FKH25A-HIR-BK-C1


Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 140962

The HellermannTyton ribbon cable holders are used for securing and guiding of flat cables and are available in four different sizes. Optionally, the FKH are secured with high-quality acrylic adhesive or M3 screws. Thanks to the practical clip fastener allows the holder quickly and easily open and close. The ribbon cable holder is made of high-quality, impact-modified polyamide 6.6 and hence can be used even in very dry areas. The rounded edges and extremely soft wings any flat cable is guided and held gently. Type: A FKH3 PA66HIR BK
ST sales unit:
ST.
Sales unit: 100 pieces
Lieske Part No.: 830204

One-piece mounting base for ribbon cables and round cables. Raised mounting surface ensures proper bonding. Quick and easy installation. Can be opened and reused. Cables are gently attached using soft holders. FKH bases are used to attach ribbon cables in information electronics, in consumer electronics or to connect sensors. Since each installation scenario is individual, FKH bases are available in different dimensions and can be supplied as self-adhesive and/or screwable versions.
Sales unit: 100 pieces
Lieske Part No.: 304235

One-piece mounting base for ribbon cables. Raised mounting surface ensures proper bonding. Quick and easy installation. Can be opened and reused. Cables are gently secured using soft holders. FKH bases are used to securely guide ribbon cables. These mounting bases are usually used in information and entertainment electronics or they are used to attach and guide sensor connections. To cover every individual application, FKH bases are available in different sizes. They can be supplied as self-adhesive or screwable versions.
Sales unit: 2000 pieces
Lieske Part No.: 2054871

One-piece mounting base for ribbon cables. Raised mounting surface ensures proper bonding. Quick and easy installation. Can be opened and reused. Cables are gently secured using soft holders. FKH bases are used to securely guide ribbon cables. These mounting bases are usually used in information and entertainment electronics or they are used to attach and guide sensor connections. To cover every individual application, FKH bases are available in different sizes. They can be supplied as self-adhesive or screwable versions.
Sales unit: 100 pieces
Lieske Part No.: 1580407

One-piece mounting base for ribbon cables. Raised mounting surface ensures proper bonding. Quick and easy installation. Can be opened and reused. Cables are gently secured using soft holders. FKH bases are used to securely guide ribbon cables. These mounting bases are usually used in information and entertainment electronics or they are used to attach and guide sensor connections. To cover every individual application, FKH bases are available in different sizes. They can be supplied as self-adhesive or screwable versions.
Sales unit: 100 pieces
Lieske Part No.: 1580406

Available as a screw or adhesive base. Optimal hold of the bundle thanks to the curved plate. The binder can be threaded in from two directions. Perfect for applications with tight installation conditions. The TY series has a rectangular design and is used primarily in the areas of telecommunications, control cabinet construction and industrial series production. The TY mounting bases are very robust and hold the bundle firmly in place even in the event of high vibrations. TY3G1 is very narrow in direct comparison with other mounting bases and can still find a place even in tight installation spaces.
Sales unit: 100 pieces
Lieske Part No.: 134333

Available as a screw or adhesive base. Optimal hold of the bundle thanks to the curved plate. The binder can be threaded in from two directions. Perfect for applications with tight installation conditions. The TY series has a rectangular design and is used primarily in the areas of telecommunications, control cabinet construction and industrial series production. The TY mounting bases are very robust and hold the bundle firmly in place even in the event of high vibrations. TY3G1 is very narrow in direct comparison with other mounting bases and can still find a place even in tight installation spaces.
Sales unit: 100 pieces
Lieske Part No.: 672809

Type: TY8H1-N66-NA-C1
Sales unit: 100 pc
Sales unit: 100 pieces
Lieske Part No.: 585054

Rational solution for parallel bundling. Installation possible with just two screws. Flexible bundle diameters by combining cable ties of different lengths. Suitable for a wide range of elongated holes. These fastening elements are used for parallel cable routing in control cabinet and mechanical engineering as well as in military systems.
Sales unit: 100 pieces
Lieske Part No.: 2054877

Curved design for additional cable protection. Easy installation using a screw or bolt. High security, especially in areas with high vibration. Various sizes and materials available. Specially designed for securing heavy cable bundles, these mounting bases can be used in many industries from agriculture to truck manufacturing. They offer a very secure fastening and can be used in combination with cable ties up to 8.3 mm wide.
Sales unit: 100 pieces
Lieske Part No.: 986167

Mounting socket screw KR6 / 8, halogen-free
, the compact mounting base KR stands
out due to the pronounced curvature, the
safe guidance of cables and
allows cable harnesses. For cable tie widths
of 6 or 8 mm. Material: polyamide 6.6, color:
nature, temperature range: -40 ° C to +85 ° C
max cable ties. Width: 6.00 mm
Dimensions (L x W): 18 x 12 Type: KR6G5-N66-NA-C1


Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 678977

Curved design for additional cable protection. Easy installation using a screw or bolt. High security, especially in areas with high vibration. Various sizes and materials available. Specially designed for securing heavy cable bundles, these mounting bases can be used in many industries from agriculture to truck manufacturing. They offer a very secure fastening and can be used in combination with cable ties up to 8.3 mm wide.
Sales unit: 100 pieces
Lieske Part No.: 720738

Mounting socket screw KR6 / 8, halogen-free KR The compact mounting base is characterized by the pronounced curvature, which allows secure management of cables and cable harnesses. For cable tie widths of 6 or 8 mm. Material: polyamide 6.6, color: nature, temperature range: -4 ° C to +85 ° C max cable ties. Width: 8 mm Dimensions (L x W): 25 x
4 Type: KR8G5-N66-NA-C
Sales unit:
ST.
Sales unit: 100 pieces
Lieske Part No.: 805595

Curved design for additional cable protection. Easy installation using a screw or bolt. High security, especially in areas with high vibration. Various sizes and materials available. Specially designed for securing heavy cable bundles, these mounting bases can be used in many industries from agriculture to truck manufacturing. They offer a very secure fastening and can be used in combination with cable ties up to 8.3 mm wide.
Sales unit: 100 pieces
Lieske Part No.: 739374

Compact design with a slight curvature. Offers a secure hold for the bundled goods. Easy installation using a screw. Particularly suitable for a secure hold in the event of vibrations. Wherever cables and lines need to be securely fastened or cable bundles are laid, these mounting bases are an optimal solution. Thanks to the curved design, the cable bundle adapts perfectly to the base and ensures that the cables are safely guided within the application.
Sales unit: 1000 pieces
Lieske Part No.: 992082

Rational solution for parallel bundling. Installation possible with just two screws. Flexible bundle diameters by combining cable ties of different lengths. Suitable for a wide range of elongated holes. These fastening elements are used for parallel cable routing in control cabinet and mechanical engineering as well as in military systems.
Sales unit: 1000 pieces
Lieske Part No.: 1232050

Rational solution for parallel bundling. Installation possible with just two screws. Flexible bundle diameters by combining cable ties of different lengths. Suitable for a wide range of elongated holes. These fastening elements are used for parallel cable routing in control cabinet and mechanical engineering as well as in military systems.
Sales unit: 1000 pieces
Lieske Part No.: 560915

Screwable mounting bases. Bundled goods to the side for screwing. Compact design. CL8 can be combined with cable ties up to 8 mm wide. Secure hold even with larger bundle diameters. Due to the lateral routing of the cable and line bundle, these bases are ideal for installation in tight spaces. Particularly for fastening in corners and on edges, as the hole can be offset by a few millimeters.
Sales unit: 8000 pieces
Lieske Part No.: 1239153

Compact design with a slight curvature. Offers a secure hold for the bundled goods. Easy installation using a screw. Particularly suitable for a secure hold in the event of vibrations. Wherever cables and lines need to be securely fastened or cable bundles are laid, these mounting bases are an ideal solution. Thanks to the curved design, the cable bundle adapts perfectly to the base and ensures that the cables are safely guided within the application.
Sales unit: 100 pieces
Lieske Part No.: 578849

Compact design with a slight curvature. Offers a secure hold for the bundled goods. Easy installation using a screw. Particularly suitable for a secure hold in the event of vibrations. Wherever cables and lines need to be securely fastened or cable bundles are laid, these mounting bases are an ideal solution. Thanks to the curved design, the cable bundle adapts perfectly to the base and ensures that the cables are safely guided within the application.
Sales unit: 100 pieces
Lieske Part No.: 261911

Type: LKCSF1 PA66 BK 100 ST item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 544035

These screw-fastening base stand next to the compact design, especially through their pronounced curvature, which allows secure management of cables and cable harnesses. The type LKCRF1 can be integrated through the rivet particularly easy to process. It is suitable for a maximum thickness of 3 mm. Type: LKCSF1-N66-NA-C1 item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 468798

Small design is ideal for tight spaces. Installation with just one screw or expanding rivet. Ensures a secure hold even in the event of high vibrations. The cable tie can be looped in from two sides. Due to their flat shape, these mounting bases can be installed in applications with limited space, such as in the telecommunications sector or in control cabinets.
Sales unit: 100 pieces
Lieske Part No.: 230296

Two-way insertion direction of the cable tie. Easy to install with a screw or a rivet. Secure hold, even in conjunction with vibration. Due to their flat shape, these mounting bases can be installed in applications with limited space, such as in the telecommunications sector or in control cabinets.
Sales unit: 100 pieces
Lieske Part No.: 963843

Two-way insertion direction of the cable tie. Easy to install with a screw or a rivet. Secure hold, even in conjunction with vibration. Due to their flat shape, these mounting bases can be installed in applications with limited space, such as in the telecommunications sector or in control cabinets.
Sales unit: 100 pieces
Lieske Part No.: 223121

Self-adhesive mounting base. Synthetic rubber adhesive for universal applications. Largest possible adhesive surface. The cable tie can be looped in from four sides for quick and flexible installation. The main areas of application for the self-adhesive MB base are in control cabinet construction, in industrial series production and in areas where the large base plate must ensure stable fastening, but screw fastening is not possible.
Sales unit: 100 pieces
Lieske Part No.: 453682

Self-adhesive base, halogen-free cable ties for (T
8R to T
5 R), 4 pages for threading cable tie width from 3.6 to 7.8 mm Material: Nylon 6.6 Color: natural temperature range: -4 ° C to +85 ° C cable tie Max. Width: 3.6 mm Dimensions (L x W):
9 x
9 Type: MB3A-N66-NA-C
Sales unit:
ST.
Sales unit: 100 pieces
Lieske Part No.: 500699

Screwable mounting base. Easy installation using standard screws. Particularly suitable for secure hold in the event of vibrations. The cable tie can be looped in from four sides for quick and flexible installation. The main areas of application are in control cabinet construction, in industrial series production and in areas where the large base plate must ensure stable fastening.
Sales unit: 100 pieces
Lieske Part No.: 768437

Self-adhesive mounting base. Synthetic rubber adhesive for universal applications. Largest possible adhesive surface. The cable tie can be looped in from four sides for quick and flexible installation. The main areas of application for the self-adhesive MB base are in control cabinet construction, in industrial series production and in areas where the large base plate must ensure stable fastening, but screw fastening is not possible.
Sales unit: 100 pieces
Lieske Part No.: 1131193

Self-adhesive mounting base. Synthetic rubber adhesive for universal applications. Largest possible adhesive surface. The cable tie can be looped in from four sides for quick and flexible installation. The main areas of application for the self-adhesive MB base are in control cabinet construction, in industrial series production and in areas where the large base plate must ensure stable fastening, but screw fastening is not possible.
Sales unit: 100 pieces
Lieske Part No.: 589041

Self-adhesive mounting base. Synthetic rubber adhesive for universal applications. Largest possible adhesive surface. The cable tie can be looped in from four sides for quick and flexible installation. The main areas of application for the self-adhesive MB base are in control cabinet construction, in industrial series production and in areas where the large base plate must ensure stable fastening, but screw fastening is not possible.
Sales unit: 500 pieces
Lieske Part No.: 573874

Self-adhesive mounting base. Synthetic rubber adhesive for universal applications. Largest possible adhesive surface. The cable tie can be looped in from four sides for quick and flexible installation. The main areas of application for the self-adhesive MB base are in control cabinet construction, in industrial series production and in areas where the large base plate must ensure stable fastening, but screw fastening is not possible.
Sales unit: 100 pieces
Lieske Part No.: 694767

Self-adhesive base, halogen-free for cable ties (T
8R to T
5 R), for threading of 4 pages tie width from 3.6 to 7.8 mm Material: Nylon 6.6 Color: natural temperature range: -4 ° C to +85 ° C Cable Ties max. Width: 5.4 mm Dimensions (L x W): 28 x 28 Type: MB4A-N66-NA-C
Sales unit:
ST.
Sales unit: 100 pieces
Lieske Part No.: 897357

Screwable mounting base. Easy installation using standard screws. Particularly suitable for secure hold in the event of vibrations. The cable tie can be looped in from four sides for quick and flexible installation. The main areas of application are in control cabinet construction, in industrial series production and in areas where the large base plate must ensure stable fastening.
Sales unit: 100 pieces
Lieske Part No.: 342055

Self-adhesive base, halogen-free
for cable tie (T18R to T150R),
4 pages for threading cable ties width 3.6
to 7.8 mm
Material: Polyamide 6.6
Color: natural
Temperature range: -40 ° C to +85 ° C
max cable ties. Width: 7.8 mm
Dimensions (L x W): 38 x 38 Type: MB5A-N66-NA-C1


Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 614549

Self-adhesive mounting base. Synthetic rubber adhesive for universal applications. Largest possible adhesive surface. The cable tie can be looped in from four sides for quick and flexible installation. The main areas of application for the self-adhesive MB base are in control cabinet construction, in industrial series production and in areas where the large base plate must ensure stable fastening, but screw fastening is not possible.
Sales unit: 100 pieces
Lieske Part No.: 818734

Parallel guidance of the bundles prevents wear and abrasion. Design enables good form-fit to the bundled goods. Can be combined with heavy-duty cable ties. Easy maintenance of the bundle is guaranteed. Made of impact-modified, heat-stabilized material. The saddle mounts are used in heavy-duty applications. They are installed between two bundles to separate them safely. Wear due to friction is prevented. The special profile allows the bundle to fit tightly, regardless of whether the bundle diameter is large or small. The heavy-duty holders of the S2 series ensure orderly cable management in a variety of applications in rail vehicle construction, the commercial vehicle and agricultural industries, and in shipbuilding.
Sales unit: 2000 pieces
Lieske Part No.: 2058130

Curved design for additional cable protection. Easy installation using a screw or bolt. High security, especially in areas with high vibration. Various sizes and materials available. Specially designed for securing heavy cable bundles, these mounting bases can be used in many industries from agriculture to truck manufacturing. They offer a very secure fastening and can be used in combination with cable ties up to 8.3 mm wide.
Sales unit: 100 pieces
Lieske Part No.: 1131276

Curved design for additional cable protection. Easy installation using a screw or bolt. High security, especially in areas with high vibration. Various sizes and materials available. Specially designed for securing heavy cable bundles, these mounting bases can be used in many industries from agriculture to truck manufacturing. They offer a very secure fastening and can be used in combination with cable ties up to 8.3 mm wide.
Sales unit: 100 pieces
Lieske Part No.: 1131206

Curved design for additional cable protection. Easy installation using a screw or bolt. High security, especially in areas with high vibration. Various sizes and materials available. Specially designed for securing heavy cable bundles, these mounting bases can be used in many industries from agriculture to truck manufacturing. They offer a very secure fastening and can be used in combination with cable ties up to 8.3 mm wide.
Lieske Part No.: 1426086

Curved design for additional cable protection. Easy installation using a screw or bolt. High security, especially in areas with high vibration. Various sizes and materials available. Specially designed for securing heavy cable bundles, these mounting bases can be used in many industries from agriculture to truck manufacturing. They offer a very secure fastening and can be used in combination with cable ties up to 8.3 mm wide.
Sales unit: 100 pieces
Lieske Part No.: 1131124

Curved design for additional cable protection. Easy installation using a screw or bolt. High security, especially in areas with high vibration. Various sizes and materials available. Specially designed for securing heavy cable bundles, these mounting bases can be used in many industries from agriculture to truck manufacturing. They offer a very secure fastening and can be used in combination with cable ties up to 8.3 mm wide.
Sales unit: 15000 pieces
Lieske Part No.: 1131615