Installation Material from HellermannTyton

Very large selection of materials and sizes. High holding power with very low looping force. Use of high-quality plastic. Supports our customers' recycling goals. Internal teeth for a secure hold on the bundle. Convenient looping thanks to the angled band end. Easy to process by hand or with tools (process-reliable). T-series cable ties can be used in a wide variety of ways. They are used wherever cables, lines or hoses need to be bundled and fastened. The variety of materials used in the cable ties enables the T-series to be used universally in a wide range of applications.
Sales unit: 100 pieces
Lieske Part No.: 371918

Type: T80I-HS-BK-C1

Sales unit: 100 pieces
Lieske Part No.: 958210

Heat-stabilized cable ties (PA66HS) for temperatures up to +105 °C. Available in a variety of sizes for almost any application. Internal serration for a secure hold on the bundle. Manual and/or pneumatic processing tools are available for greater process reliability. Available in natural and black as standard. Other colors are available on request. These internally serrated cable ties are made of heat-stabilized polyamide 6.6 (PA66HS). They can be used in environments with continuous temperatures up to +105 °C. Tightening by hand is possible. However, processing tools are recommended for consistent tying quality.
Sales unit: 100 pieces
Lieske Part No.: 370785

Type: T80I-HS-BK-M1

Sales unit: 1000 pieces
Lieske Part No.: 445979

UV-weather-resistant cable ties in a wide range of types. Made from 100% high-quality plastic, so easy to recycle. Internal teeth for a secure hold on the bundle. Easy to process by hand or with tools (process-reliable). Easy to loop through the angled end of the band. These internally toothed cable ties are made from UV-resistant polyamide 6.6 (PA66W) and are suitable for outdoor applications. Compared to conventional cable ties made from PA66, UV-stabilized cable ties withstand UV radiation for a much longer period of time. PA66W cable ties are therefore recommended for bundling and fastening cables, pipes and hoses outdoors.
Sales unit: 100 pieces
Lieske Part No.: 928050

Very large selection of materials and sizes. High holding power with very low looping force. Use of high-quality plastic. Supports our customers' recycling goals. Internal teeth for a secure hold on the bundle. Easy to process by hand or with tools (process-reliable). T-series cable ties can be used in a wide variety of ways. They are used wherever cables, lines or hoses need to be bundled and fastened. The variety of materials used in the cable ties enables the T-series to be used universally in a wide range of applications.
Sales unit: 100 pieces
Lieske Part No.: 1104101

Very large selection of materials and sizes. High holding power with very low looping force. Use of high-quality plastic. Supports our customers' recycling goals. Internal teeth for a secure hold on the bundle. Convenient looping thanks to the angled band end. Easy to process by hand or with tools (process-reliable). T-series cable ties can be used in a wide variety of ways. They are used wherever cables, lines or hoses need to be bundled and fastened. The variety of materials used in the cable ties enables the T-series to be used universally in a wide range of applications.
Sales unit: 100 pieces
Lieske Part No.: 1319302

Very large selection of materials and sizes. High holding power with very low looping force. Use of high-quality plastic. Supports our customers' recycling goals. Internal teeth for a secure hold on the bundle. Convenient looping thanks to the angled band end. Easy to process by hand or with tools (process-reliable). T-series cable ties can be used in a wide variety of ways. They are used wherever cables, lines or hoses need to be bundled and fastened. The variety of materials used in the cable ties enables the T-series to be used universally in a wide range of applications.
Sales unit: 100 pieces
Lieske Part No.: 2057126

Type: T120R(E) PA66 BK 100 ST

Sales unit: 100 pieces
Lieske Part No.: 112513

Very large selection of materials and sizes. High holding power with very low looping force. Use of high-quality plastic. Supports our customers' recycling goals. Internal teeth for a secure hold on the bundle. Convenient looping thanks to the angled band end. Easy to process by hand or with tools (process-reliable). T-series cable ties can be used in a wide variety of ways. They are used wherever cables, lines or hoses need to be bundled and fastened. The variety of materials used in the cable ties enables the T-series to be used universally in a wide range of applications.
Sales unit: 100 pieces
Lieske Part No.: 919536

Type: T120R(E) PA66HIR(S) BK 100 ST

Sales unit: 100 pieces
Lieske Part No.: 907006

Type: T120R-HS-BK-C1

Sales unit: 100 pieces
Lieske Part No.: 601108

Type: T120R(E) PA66HS NA 100 ST

Sales unit: 100 pieces
Lieske Part No.: 427695

UV-weather-resistant cable ties in a wide range of types. Made from 100% high-quality plastic, so easy to recycle. Internal teeth for a secure hold on the bundle. Easy to process by hand or with tools (process-reliable). Easy to loop through the angled end of the band. T-series cable ties have a wide range of uses. They are used wherever cables, lines or hoses need to be bundled and secured. The variety of materials used in the cable ties means that the T-series can be used universally in a wide range of applications.
Sales unit: 100 pieces
Lieske Part No.: 881122

Very large selection of materials and sizes. High holding power with very low looping force. Use of high-quality plastic. Supports our customers' recycling goals. Internal teeth for a secure hold on the bundle. Convenient looping thanks to the angled band end. Easy to process by hand or with tools (process-reliable). T-series cable ties can be used in a wide variety of ways. They are used wherever cables, lines or hoses need to be bundled and fastened. The variety of materials used in the cable ties enables the T-series to be used universally in a wide range of applications.
Sales unit: 2000 pieces
Lieske Part No.: 2057127

Very large selection of materials and sizes. High holding power with very low looping force. Use of high-quality plastic. Supports our customers' recycling goals. Internal teeth for a secure hold on the bundle. Convenient looping thanks to the angled band end. Easy to process by hand or with tools (process-reliable). T-series cable ties can be used in a wide variety of ways. They are used wherever cables, lines or hoses need to be bundled and fastened. The variety of materials used in the cable ties enables the T-series to be used universally in a wide range of applications.
Sales unit: 100 pieces
Lieske Part No.: 2054880

Very large selection of materials and sizes. High holding power with very low looping force. Use of high-quality plastic. Supports our customers' recycling goals. Internal teeth for a secure hold on the bundle. Convenient looping thanks to the angled band end. Easy to process by hand or with tools (process-reliable). T-series cable ties can be used in a wide variety of ways. They are used wherever cables, lines or hoses need to be bundled and fastened. The variety of materials used in the cable ties enables the T-series to be used universally in a wide range of applications.
Sales unit: 100 pieces
Lieske Part No.: 717917

Type: T120I-W-BK-C1

Sales unit: 100 pieces
Lieske Part No.: 659552

Flat head geometry for tight installation conditions. High flexibility due to the small band cross-section. Gentle force distribution on soft cable bundles or hoses. Firm hold on the bundle thanks to grooves in the head area. Angled band end for quick looping. Wide application range from 9.5 mm to 104 mm bundle diameter. Wide Strap cable ties are suitable for bundling cable harnesses and hoses for heavy-duty applications in the truck, rail vehicle and shipbuilding (mass transit) sectors as well as in the construction industry. The flat head geometry enables installation even in tight spaces.
Sales unit: 1200 pieces
Lieske Part No.: 2056464

Flat head geometry for tight installation conditions. High flexibility due to the small band cross-section. Gentle distribution of forces on soft cable bundles or hoses. Firm hold on the bundle thanks to grooves in the head area. Angled band end for quick looping. Wide Strap cable ties are suitable for bundling cable harnesses and hoses for heavy-duty applications in the areas of trucks, rail vehicles and shipbuilding (mass transit) as well as in the construction industry. The flat head geometry enables installation even in tight spaces.
Sales unit: 1200 pieces
Lieske Part No.: 2056465

Flat head geometry for tight installation conditions. High flexibility due to the small band cross-section. Gentle distribution of forces on soft cable bundles or hoses. Firm hold on the bundle thanks to grooves in the head area. Angled band end for quick looping. Wide Strap cable ties are suitable for bundling cable harnesses and hoses for heavy-duty applications in the areas of trucks, rail vehicles and shipbuilding (mass transit) as well as in the construction industry. The flat head geometry enables installation even in tight spaces.
Sales unit: 1200 pieces
Lieske Part No.: 2056466

Very large selection of materials and sizes. High holding power with very low looping force. Use of high-quality plastic. Supports our customers' recycling goals. Internal teeth for a secure hold on the bundle. Convenient looping thanks to the angled band end. Easy to process by hand or with tools (process-reliable). T-series cable ties can be used in a wide variety of ways. They are used wherever cables, lines or hoses need to be bundled and fastened. The variety of materials used in the cable ties enables the T-series to be used universally in a wide range of applications.
Sales unit: 15000 pieces
Lieske Part No.: 2057128

Very large selection of materials and sizes. High holding power with very low looping force. Use of high-quality plastic. Supports our customers' recycling goals. Internal teeth for a secure hold on the bundle. Convenient looping thanks to the angled band end. Easy to process by hand or with tools (process-reliable). T-series cable ties can be used in a wide variety of ways. They are used wherever cables, lines or hoses need to be bundled and fastened. The variety of materials used in the cable ties enables the T-series to be used universally in a wide range of applications.
Sales unit: 50 pieces
Lieske Part No.: 1133534

Very large selection of materials and sizes. High holding power with very low looping force. Use of high-quality plastic. Supports our customers' recycling goals. Internal teeth for a secure hold on the bundle. Convenient looping thanks to the angled band end. Easy to process by hand or with tools (process-reliable). T-series cable ties can be used in a wide variety of ways. They are used wherever cables, lines or hoses need to be bundled and fastened. The variety of materials used in the cable ties enables the T-series to be used universally in a wide range of applications.
Sales unit: 50 pieces
Lieske Part No.: 401926

UV-weather-resistant cable ties in a wide range of types. Made from 100% high-quality plastic, so easy to recycle. Internal teeth for a secure hold on the bundle. Easy to process by hand or with tools (process-reliable). Easy to loop through the angled end of the band. T-series cable ties have a wide range of uses. They are used wherever cables, lines or hoses need to be bundled and secured. The variety of materials used in the cable ties means that the T-series can be used universally in a wide range of applications.
Sales unit: 50 pieces
Lieske Part No.: 657294

Type: T120L-HS-BK-L1

Sales unit: 50 pieces
Lieske Part No.: 932150

Sehr große Material- und Größenauswahl. Hohe Haltekraft mit sehr geringer Einschlaufkraft. Verwendung von qualitativ hochwertigem Kunststoff. Innenverzahnung für sicheren Halt am Bündel. Bequemes Einschlaufen durch gewinkeltes Bandende. Einfache Verarbeitung von Hand oder mit Werkzeug (prozesssicher). Kabelbinder der T-Serie sind sehr vielfältig zu verwenden. Sie kommen überall dort zum Einsatz wo Kabel, Leitungen oder Schläuche gebündelt und befestigt werden müssen. Die Materialvielfalt der Kabelbinder ermöglicht eine universelle Verwendung der T-Serie in einem weiten Anwendungsspektrum.
Sales unit: 50000 pieces
Lieske Part No.: 1247281

Very large selection of materials and sizes. High holding power with very low looping force. Use of high-quality plastic. Supports our customers' recycling goals. Internal teeth for a secure hold on the bundle. Convenient looping thanks to the angled band end. Easy to process by hand or with tools (process-reliable). T-series cable ties can be used in a wide variety of ways. They are used wherever cables, lines or hoses need to be bundled and fastened. The variety of materials used in the cable ties enables the T-series to be used universally in a wide range of applications.
Sales unit: 15000 pieces
Lieske Part No.: 2051507

Very large selection of materials and sizes. High holding power with very low looping force. Use of high-quality plastic. Supports our customers' recycling goals. Internal teeth for a secure hold on the bundle. Convenient looping thanks to the angled band end. Easy to process by hand or with tools (process-reliable). T-series cable ties can be used in a wide variety of ways. They are used wherever cables, lines or hoses need to be bundled and fastened. The variety of materials used in the cable ties enables the T-series to be used universally in a wide range of applications.
Sales unit: 100 pieces
Lieske Part No.: 452240

Cable Ties, halogen-free
With internal teething bands in different
Dimensions, beam diameter of 294 mm,
Material: polyamide 6.6, color: natural black + (Stable weather)
Temperature range: -40 ° C
to +85 ° C,
Tape Length: 465
Bandwidth: 7.6
Color: natural

Type: T120M-N66-NA-C1
Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 162884

UV-weather-resistant cable ties in a wide range of types. Made from 100% high-quality plastic, so easy to recycle. Internal teeth for a secure hold on the bundle. Easy to process by hand or with tools (process-reliable). Easy to loop through the angled end of the band. T-series cable ties have a wide range of uses. They are used wherever cables, lines or hoses need to be bundled and secured. The variety of materials used in the cable ties means that the T-series can be used universally in a wide range of applications.
Sales unit: 100 pieces
Lieske Part No.: 702438

Very large selection of materials and sizes. High holding power with very low looping force. Use of high-quality plastic. Supports our customers' recycling goals. Internal teeth for a secure hold on the bundle. Convenient looping thanks to the angled band end. Easy to process by hand or with tools (process-reliable). T-series cable ties can be used in a wide variety of ways. They are used wherever cables, lines or hoses need to be bundled and fastened. The variety of materials used in the cable ties enables the T-series to be used universally in a wide range of applications.
Sales unit: 50 pieces
Lieske Part No.: 2056030

Very large selection of materials and sizes. High holding power with very low looping force. Use of high-quality plastic. Supports our customers' recycling goals. Internal teeth for a secure hold on the bundle. Convenient looping thanks to the angled band end. Easy to process by hand or with tools (process-reliable). T-series cable ties can be used in a wide variety of ways. They are used wherever cables, lines or hoses need to be bundled and fastened. The variety of materials used in the cable ties enables the T-series to be used universally in a wide range of applications.
Sales unit: 50 pieces
Lieske Part No.: 1239199

Very large selection of materials and sizes. High holding power with very low looping force. Use of high-quality plastic. Supports our customers' recycling goals. Internal teeth for a secure hold on the bundle. Convenient looping thanks to the angled band end. Easy to process by hand or with tools (process-reliable). T-series cable ties can be used in a wide variety of ways. They are used wherever cables, lines or hoses need to be bundled and fastened. The variety of materials used in the cable ties enables the T-series to be used universally in a wide range of applications.
Sales unit: 50 pieces
Lieske Part No.: 2054895

Heat-stabilized cable ties (PA66HS) for temperatures up to +105 °C. Available in a variety of sizes for almost any application. Internal serration for a secure hold on the bundle. Manual and/or pneumatic processing tools are available for greater process reliability. Available in natural and black as standard. Other colors are available on request. These internally serrated cable ties are made of heat-stabilized polyamide 6.6 (PA66HS). They can be used in environments with continuous temperatures up to +105 °C. Tightening by hand is possible. However, processing tools are recommended for consistent tying quality.
Sales unit: 500 pieces
Lieske Part No.: 2056987

Heat-stabilized cable ties (PA66HS) for temperatures up to +105 °C. Available in a variety of sizes for almost any application. Internal serration for a secure hold on the bundle. Manual and/or pneumatic processing tools are available for greater process reliability. Available in natural and black as standard. Other colors are available on request. These internally serrated cable ties are made of heat-stabilized polyamide 6.6 (PA66HS). They can be used in environments with continuous temperatures up to +105 °C. Tightening by hand is possible. However, processing tools are recommended for consistent tying quality.
Sales unit: 40000 pieces
Lieske Part No.: 2057129

Very large selection of materials and sizes. High holding power with very low looping force. Use of high-quality plastic. Supports our customers' recycling goals. Internal teeth for a secure hold on the bundle. Convenient looping thanks to the angled band end. Easy to process by hand or with tools (process-reliable). T-series cable ties can be used in a wide variety of ways. They are used wherever cables, lines or hoses need to be bundled and fastened. The variety of materials used in the cable ties enables the T-series to be used universally in a wide range of applications.
Sales unit: 20000 pieces
Lieske Part No.: 2056959

Very large selection of materials and sizes. High holding power with very low looping force. Use of high-quality plastic. Supports our customers' recycling goals. Internal teeth for a secure hold on the bundle. Convenient looping thanks to the angled band end. Easy to process by hand or with tools (process-reliable). T-series cable ties can be used in a wide variety of ways. They are used wherever cables, lines or hoses need to be bundled and fastened. The variety of materials used in the cable ties enables the T-series to be used universally in a wide range of applications.
Sales unit: 50 pieces
Lieske Part No.: 313349

UV-weather-resistant cable ties in a wide range of types. Made from 100% high-quality plastic, so easy to recycle. Internal teeth for a secure hold on the bundle. Easy to process by hand or with tools (process-reliable). Easy to loop through the angled end of the band. These internally toothed cable ties are made from UV-resistant polyamide 6.6 (PA66W) and are suitable for outdoor applications. Compared to conventional cable ties made from PA66, UV-stabilized cable ties withstand UV radiation for a much longer period of time. PA66W cable ties are therefore recommended for bundling and fastening cables, pipes and hoses outdoors.
Sales unit: 50 pieces
Lieske Part No.: 436667

Very large selection of materials and sizes. High holding power with very low looping force. Use of high-quality plastic. Supports our customers' recycling goals. Internal teeth for a secure hold on the bundle. Convenient looping thanks to the angled band end. Easy to process by hand or with tools (process-reliable). T-series cable ties can be used in a wide variety of ways. They are used wherever cables, lines or hoses need to be bundled and fastened. The variety of materials used in the cable ties enables the T-series to be used universally in a wide range of applications.
Sales unit: 100 pieces
Lieske Part No.: 551226

Very large selection of materials and sizes. High holding power with very low looping force. Use of high-quality plastic. Supports our customers' recycling goals. Internal teeth for a secure hold on the bundle. Convenient looping thanks to the angled band end. Easy to process by hand or with tools (process-reliable). T-series cable ties can be used in a wide variety of ways. They are used wherever cables, lines or hoses need to be bundled and fastened. The variety of materials used in the cable ties enables the T-series to be used universally in a wide range of applications.
Sales unit: 100 pieces
Lieske Part No.: 253023

UV-weather-resistant cable ties in a wide range of types. Made from 100% high-quality plastic, so easy to recycle. Internal teeth for a secure hold on the bundle. Easy to process by hand or with tools (process-reliable). Easy to loop through the angled end of the band. T-series cable ties have a wide range of uses. They are used wherever cables, lines or hoses need to be bundled and secured. The variety of materials used in the cable ties means that the T-series can be used universally in a wide range of applications.
Sales unit: 100 pieces
Lieske Part No.: 658469

Type: T150R-HS-BK-C1

Sales unit: 100 pieces
Lieske Part No.: 552052

Type: T150R-HS-NA-C1

Sales unit: 100 pieces
Lieske Part No.: 321728

Quantity: 5000 ST.
Sales unit: 4000 pieces
Lieske Part No.: 943893

Quantity: 5000 ST.
Sales unit: 4000 pieces
Lieske Part No.: 960495

UV-weather-resistant cable ties in a wide range of types. Made from 100% high-quality plastic, so easy to recycle. Internal teeth for a secure hold on the bundle. Easy to process by hand or with tools (process-reliable). Easy to loop through the angled end of the band. T-series cable ties have a wide range of uses. They are used wherever cables, lines or hoses need to be bundled and secured. The variety of materials used in the cable ties means that the T-series can be used universally in a wide range of applications.
Sales unit: 10000 pieces
Lieske Part No.: 2129558

Type: T150L-PA66-BK-Q1
Sales unit: 25 pieces
Lieske Part No.: 485853

Heat-stabilized cable ties (PA66HS) for temperatures up to +105 °C. Available in a variety of sizes for almost any application. Internal serration for a secure hold on the bundle. Manual and/or pneumatic processing tools are available for greater process reliability. Available in natural and black as standard. Other colors are available on request. These internally serrated cable ties are made of heat-stabilized polyamide 6.6 (PA66HS). They can be used in environments with continuous temperatures up to +105 °C. Tightening by hand is possible. However, processing tools are recommended for consistent tying quality.
Sales unit: 500 pieces
Lieske Part No.: 1133533

Cable Ties, halogen-free
With internal teething bands in different
Dimensions, beam diameter of 294 mm,
Material: polyamide 6.6, color: natural black + (Stable weather)
Temperature range: -40 ° C
to +85 ° C,
Tape Length: 813
Bandwidth: 8.8
Color: natural

Type: T150L-N66-NA-Q1
Item: 25 ST.
Sales unit: 25 pieces
Lieske Part No.: 240977