Installation Material from HellermannTyton

Curved design for additional cable protection. Easy installation using a screw or bolt. High security, especially in areas with high vibration. Various sizes and materials available. Specially designed for securing heavy cable bundles, these mounting bases can be used in many industries from agriculture to truck manufacturing. They offer a very secure fastening and can be used in combination with cable ties up to 8.3 mm wide.
Sales unit: 5000 pieces
Lieske Part No.: 1131362

Sales Unit: 100 ST.
Sales unit: 5000 pieces
Lieske Part No.: 172127

Type: CTM3-PA66-WH-C1 item: 5000 ST.
Sales unit: 7000 pieces
Lieske Part No.: 565588

Curved design for additional cable protection. Easy installation using a screw or bolt. High security, especially in areas with high vibration. Various sizes and materials available. Specially designed for securing heavy cable bundles, these mounting bases can be used in many industries from agriculture to truck manufacturing. They offer a very secure fastening and can be used in combination with cable ties up to 8.3 mm wide.
Sales unit: 10000 pieces
Lieske Part No.: 1131361

These bases are used wherever cables and wires with larger diameters need to be attached, e.g. B. in agricultural machinery or truck construction. They can be combined with cable ties up to 8.3 mm wide. Sales unit: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 1131360

Compact, flat design. Suitable for applications with minimal space. Can be combined with cable ties up to 5 mm wide. 4-way looping direction for use in line or at a 90° angle. Due to their small dimensions, the robust CTAM bases with 4-way cable tie holder are particularly suitable for limited space, e.g. in telecommunications, in control cabinets and in equipment or plant construction.
Sales unit: 100 pieces
Lieske Part No.: 2048842

Compact, flat design. Suitable for applications with minimal space. Can be combined with cable ties up to 5 mm wide. 4-way looping direction for use in line or at a 90° angle. Due to their small dimensions, the robust CTAM bases with 4-way cable tie holder are particularly suitable for limited space, e.g. in telecommunications, in control cabinets and in equipment or plant construction.
Sales unit: 100 pieces
Lieske Part No.: 1596655

Type: CTAM2-PA66-NA-C1 item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 297584

For applications with tight installation situations. Secure fastening using the expansion anchor. The TM1SF fastening element is used to hold a cable tie in tight spaces. It is used wherever a simple and quick fastening is required.
Sales unit: 100 pieces
Lieske Part No.: 350796

Type: AT1-N66-BK-C1
Sales unit: 10000 pc
Sales unit: 100 pieces
Lieske Part No.: 339440

Sales Unit: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 734497

Type: AT2-N66-BK-C1
Sales unit: 100 pc
Sales unit: 100 pieces
Lieske Part No.: 339539

Identification signs and arrows for fastening with cable ties. Labeling using a T82 marker pen or fitting with Ovalgrip. AT1 for 7 Ovalgrip identification grommets of size 50. AT2 for 8 Ovalgrip identification grommets of size 85. AT3 for 14 Ovalgrip identification grommets of size 85. Individually printed signs and arrows available on request. The identification signs and plates are suitable for marking cable harnesses, cable bundles and other objects before and after assembly. Cable ties of any length can be used to attach the items to the bundle.
Sales unit: 100 pieces
Lieske Part No.: 564369

Identification signs and arrows for fastening with cable ties. Labeling using a T82 marker pen or fitting with Ovalgrip. AT1 for 7 Ovalgrip identification grommets of size 50. AT2 for 8 Ovalgrip identification grommets of size 85. AT3 for 14 Ovalgrip identification grommets of size 85. Individually printed signs and arrows available on request. The identification signs and plates are suitable for marking cable harnesses, cable bundles and other objects before and after assembly. Cable ties of any length can be used to attach the items to the bundle.
Sales unit: 100 pieces
Lieske Part No.: 1189953

Identification signs and arrows for fastening with cable ties. Labeling using a T82 marker pen or fitting with Ovalgrip. AT1 for 7 Ovalgrip identification grommets of size 50. AT2 for 8 Ovalgrip identification grommets of size 85. AT3 for 14 Ovalgrip identification grommets of size 85. Individually printed signs and arrows available on request. The identification signs and plates are suitable for marking cable harnesses, cable bundles and other objects before and after assembly. Cable ties of any length can be used to attach the items to the bundle.
Sales unit: 100 pieces
Lieske Part No.: 381112

IT and IMP plates for marking cables and pipes with large diameters. Also for marking flat surfaces. Labeling with printable labels or with marker pens from the T82 series. Fastening with cable ties or rivets. Individually printed plates available on request. The IT and IMP plates are suitable for marking cables and pipes before and after assembly. They can be used regardless of the size of the bundled goods, as they can be fastened with cable ties of any length (width up to 4.8 mm). Alternatively, fastening with rivets is possible. The plates can be labeled manually with the marker pens from the T82 series.
Sales unit: 100 pieces
Lieske Part No.: 592323

Sales Unit: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 287293

Type: IMP2 PA66 NA 100 ST item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 165550

Type: IMP2.5-
9
PA66 NA
ST sales unit:
ST.
Sales unit: 100 pieces
Lieske Part No.: 783424

IT and IMP plates for marking cables and pipes with large diameters. Also for marking flat surfaces. Labeling with printable labels or with marker pens from the T82 series. Fastening with cable ties or rivets. Individually printed plates available on request. The IT and IMP plates are suitable for marking cable harnesses, cable bundles and other objects before and after assembly. Cable ties of any length (width up to 4.8 mm) can be used to fasten them to the bundled goods. Alternatively, fastening with rivets is possible. The plates can be labeled manually with the marker pens from the T82 series or provided with suitable labels.
Sales unit: 5000 pieces
Lieske Part No.: 362440

IT and IMP plates for marking cables and pipes with large diameters. Also for marking flat surfaces. Labeling with printable labels or with marker pens from the T82 series. Fastening with cable ties or rivets. Individually printed plates available on request. The IT and IMP plates are suitable for marking cable harnesses, cable bundles and other objects before and after assembly. Cable ties of any length (width up to 4.8 mm) can be used to fasten them to the bundled goods. Alternatively, fastening with rivets is possible. The plates can be labeled manually with the marker pens from the T82 series or provided with suitable labels.
Sales unit: 100 pieces
Lieske Part No.: 313110

Screwable mounting bases. Bundled goods to the side for screwing. Compact design. Can be combined with cable ties up to 4.6 mm wide. Secure hold even with larger bundle diameters. Due to the lateral guidance of the cable and line bundle, these bases are ideal for installation in tight spaces, especially for fastening in corners and on edges, as the hole can be offset by a few millimeters.
Sales unit: 500 pieces
Lieske Part No.: 970743

Screwable mounting bases. Bundled goods to the side for screwing. Compact design. Can be combined with cable ties up to 4.6 mm wide. Secure hold even with larger bundle diameters. Due to the lateral routing of the cable and line bundle, these bases are ideal for installation in tight spaces. Particularly for fastening in corners and on edges, as the hole can be offset by a few millimeters.
Sales unit: 500 pieces
Lieske Part No.: 567364

Screwable mounting bases. Bundled goods to the side for screwing. Compact design. Can be combined with cable ties up to 4.6 mm wide. Secure hold even with larger bundle diameters. Due to the lateral routing of the cable and line bundle, these bases are ideal for installation in tight spaces. Particularly for fastening in corners and on edges, as the hole can be offset by a few millimeters.
Sales unit: 500 pieces
Lieske Part No.: 426612

For single or multiple cables. Simply place cables in the square holder. Lockable to prevent accidental removal. Expansion anchors for easy and safe installation. The WPC holders are used in many industrial areas, including in the frame profiles of control cabinets or inside household appliances, where they can be installed without losing space.
Lieske Part No.: 2054886

For single or multiple cables. Simply place cables in the square holder. Lockable to prevent accidental removal. Expansion anchors for easy and safe installation. The WPC holders are used in many industrial areas, including in the frame profiles of control cabinets or inside household appliances, where they can be installed without losing space.
Sales unit: 500 pieces
Lieske Part No.: 2054884

For single or multiple cables. Simply place cables in the square holder. Lockable to prevent accidental removal. Expansion anchors for easy and safe installation. The WPC holders are used in many industrial areas, including in the frame profiles of control cabinets or inside household appliances, where they can be installed without losing space.
Sales unit: 500 pieces
Lieske Part No.: 818186

For single or multiple cables. Simply place cables in the square holder. Lockable to prevent accidental removal. Expansion anchors for easy and safe installation. The WPC holders are used in many industrial areas, including in the frame profiles of control cabinets or inside household appliances, where they can be installed without losing space.
Sales unit: 500 pieces
Lieske Part No.: 2054885

For many materials such as concrete, bricks and wood. Can be combined with cable ties up to 9 mm wide. Simply hammer into hole (7-8 mm). LOK01B is intended for soft masonry and 6 mm holes. LOK05 with spacing to guide bundles at a distance from the masonry. The LOK wall plug is used in combination with a cable tie for the efficient laying and fastening of cables and lines in buildings.
Sales unit: 100 pieces
Lieske Part No.: 311572

Ideal for routing cable bundles in parallel. For cable ties up to 9 mm wide. The LOK04 ring offers an easy way to bundle cables and lines and route them in parallel at the same time.
Sales unit: 20000 pieces
Lieske Part No.: 2058193

Type: LOK01B PA6HIR BK 100 ST
Sales unit: 9000 pc
Sales unit: 100 pieces
Lieske Part No.: 478333

Type: TY5K2 PA66HS NA 100 ST sales unit: 1 unit.
Lieske Part No.: 586606

Time-saving fastening solution. Base consists of two parts. Simply push into the fastening hole. Can be combined with cable ties of different widths. The TY5 wedge bases are used wherever efficient fastening and high fastening security are required, even under vibrations. The two-part wedge remains firmly anchored in the drill hole after insertion.
Sales unit: 100 pieces
Lieske Part No.: 940230

Time-saving fastening solution. Base consists of two parts. Simply push into the fastening hole. Can be combined with cable ties of different widths. The TY5 wedge bases are used wherever efficient fastening and high fastening security are required, even under vibrations. The two-part wedge remains firmly anchored in the drill hole after insertion.
Sales unit: 100 pieces
Lieske Part No.: 490322

Type: TY5K3 PA66W BK 100 ST sales unit: 1 ST.
Sales unit: 2000 pieces
Lieske Part No.: 646455

Easy attachment of ribbon cables. Made of PVC (polyvinyl chloride).
Sales unit: 5000 pieces
Lieske Part No.: 2050603

CTC corrugated pipe holders for different nominal dimensions. Various sheet thicknesses are used with a single slatted base part. Also for blind holes with thread. Safe guidance of the pipe by simply clicking in. Axial displacement is prevented by the profile in the corrugated pipe holder. These holders are used in the automotive industry, cable assembly and electrical industry, for example, especially where corrugated pipes need to be fastened in a time-saving and safe manner.
Sales unit: 500 pieces
Lieske Part No.: 2055563

The head of the divider takes up a defined position when assembled. Easy assembly, no tools required. Bundled goods run at a defined distance from the surface directly above the welding stud. Primarily developed for the automotive industry, these welding stud holders are also used in all other areas where cables and lines need to be safely guided using welding or threaded studs.
Sales unit: 500 pieces
Lieske Part No.: 455249

Type: CTC7.5FT9 PA66HIRHS BK 500 ST Package: 4000 ST.
Sales unit: 500 pieces
Lieske Part No.: 420484

2-part cable tie with EdgeClip, pre-assembled. The head of the tie can be moved to the optimal bundle position. Type EC9, EC10, EC21 and EC22 for bundle diameters from 1 mm. For edges of 1-3 mm. Elements from the EdgeClip series are a very good alternative wherever holes and weld studs cannot be drilled and adhesives cannot be used due to higher temperatures. The EdgeClip series is used for bundling and fastening cable harnesses and hoses, mainly in the automotive, construction and electrical industries, as well as in cable harness production.
Sales unit: 500 pieces
Lieske Part No.: 2058132

Pre-assembled two-part fastening ties with EdgeClip. The head of the cable tie can still be moved after fastening. For the smallest bundle diameters from 1 mm. For edges of 3 - 6 mm. The combination of cable ties and EdgeClip is suitable wherever holes cannot be drilled or where bonding fails due to high temperatures. These solutions are widely used for fastening and bundling cables, lines and pipes, e.g. in the automotive, construction and electrical industries as well as in cable harness production.
Sales unit: 500 pieces
Lieske Part No.: 325608

Type: T50ROSEC24 PA66HS,PA66HIRHS BK 500 ST
Sales unit: 3000 pc
Sales unit: 500 pieces
Lieske Part No.: 842027

2-part cable tie with EdgeClip, pre-assembled. The head of the tie can be moved to the optimal bundle position. Type EC9, EC10, EC21 and EC22 for bundle diameters from 1 mm. For edges of 1-3 mm. Elements from the EdgeClip series are a very good alternative wherever holes and weld studs cannot be drilled and adhesives cannot be used due to higher temperatures. The EdgeClip series is used for bundling and fastening cable harnesses and hoses, mainly in the automotive, construction and electrical industries, as well as in cable harness production.
Sales unit: 500 pieces
Lieske Part No.: 446943

2-part cable tie with EdgeClip, pre-assembled. The head of the tie can be moved to the optimal bundle position. Type EC9, EC10, EC21 and EC22 for bundle diameters from 1 mm. For edges of 1-3 mm. Elements from the EdgeClip series are a very good alternative wherever holes and weld studs cannot be drilled and adhesives cannot be used due to higher temperatures. The EdgeClip series is used for bundling and fastening cable harnesses and hoses, mainly in the automotive, construction and electrical industries, as well as in cable harness production.
Sales unit: 500 pieces
Lieske Part No.: 1216592

Quantity: 4000 ST.
Sales unit: 500 pieces
Lieske Part No.: 438109

Type: T50SOSEC21 PA66HS, PA66HIRHS BK 500 ST Package: 4000 ST.
Sales unit: 500 pieces
Lieske Part No.: 127229

2-part cable tie with EdgeClip, pre-assembled. The head of the tie can be moved to the optimal bundle position. Type EC9, EC10, EC21 and EC22 for bundle diameters from 1 mm. For edges of 1 - 3 mm. Elements from the EdgeClip series are a very good alternative wherever holes and weld studs cannot be drilled and adhesives cannot be used due to higher temperatures. The EdgeClip family is used for bundling and fastening cable harnesses and hoses, primarily in the automotive, construction and electrical industries, as well as in cable harness production.
Sales unit: 500 pieces
Lieske Part No.: 2055564

Type: T50ROSEC20-MC5-BK-D1
Sales unit: 500 pc
Sales unit: 500 pieces
Lieske Part No.: 466192

2-part cable tie with slatted base, pre-assembled. The head of the tie can be moved to the optimal bundle position. Easy assembly, no tools required. Protects against dirt and dust penetration through plates. Various sheet thicknesses can be used with a single slatted base part. Also for blind holes with threads. The tie was developed primarily for fastening cable harnesses in the automotive industry. Due to its simple and user-friendly application, the fastening tie is also used in other industries, e.g. in aviation, switchgear and in the manufacture of household appliances.
Sales unit: 500 pieces
Lieske Part No.: 2058135

2-part cable tie with EdgeClip, pre-assembled. Easy assembly, no tools required. The head of the tie can be moved to the optimal bundling position. For edges of 1 - 2.5 mm or 1 - 3 mm. Rotatable cable tie for flexible cable routing. This combination of cable tie and Edge Clip is suitable wherever holes cannot be drilled or where an adhesive fails due to high temperatures. These solutions are widely used for fastening and bundling cables, lines and pipes, e.g. in the automotive, construction and electrical industries as well as in cable harness production.
Sales unit: 500 pieces
Lieske Part No.: 2048215