Installation Material from HellermannTyton

HP fastening clamps made of polyamide. Good temperature resistance and high load capacity. Available in various sizes. Can be used without cable ties. The HP plastic clamps are used in many industries for permanent or temporary cable fastenings. Their low weight makes the clamps particularly suitable for the aviation or automotive industries. They ensure that the overall weight is minimized while maintaining a strong fastening solution.
Sales unit: 1000 pieces
Lieske Part No.: 169855

HP fastening clamps made of polyamide. Good temperature resistance and high load capacity. Available in various sizes. Can be used without cable ties. The HP plastic clamps are used in many industries for permanent or temporary cable fastenings. Their low weight makes the clamps particularly suitable for the aviation or automotive industries. They ensure that the overall weight is minimized while maintaining a strong fastening solution.
Sales unit: 1000 pieces
Lieske Part No.: 632546

HP fastening clamps made of polyamide. Good temperature resistance and high load capacity. Available in various sizes. Can be used without cable ties. The HP plastic clamps are used in many industries for permanent or temporary cable fastenings. Their low weight makes the clamps particularly suitable for the aviation or automotive industries. They ensure that the overall weight is minimized while maintaining a strong fastening solution.
Sales unit: 1000 pieces
Lieske Part No.: 121334

HP fastening clamps made of polyamide. Good temperature resistance and high load capacity. Available in various sizes. Can be used without cable ties. The HP plastic clamps are used in many industries for permanent or temporary cable fastenings. Their low weight makes the clamps particularly suitable for the aviation or automotive industries. They ensure that the overall weight is minimized while maintaining a strong fastening solution.
Sales unit: 1000 pieces
Lieske Part No.: 609313

HP fastening clamps made of polyamide. Good temperature resistance and high load capacity. Available in various sizes. Can be used without cable ties. The HP plastic clamps are used in many industries for permanent or temporary cable fastenings. Their low weight makes the clamps particularly suitable for the aviation or automotive industries. They ensure that the overall weight is minimized while maintaining a strong fastening solution.
Sales unit: 1000 pieces
Lieske Part No.: 595131

HP fastening clamps made of polyamide. Good temperature resistance and high load capacity. Available in various sizes. Can be used without cable ties. The HP plastic clamps are used in many industries for permanent or temporary cable fastenings. Their low weight makes the clamps particularly suitable for the aviation or automotive industries. They ensure that the overall weight is minimized while maintaining a strong fastening solution.
Sales unit: 1000 pieces
Lieske Part No.: 621935

HP fastening clamps made of polyamide. Good temperature resistance and high load capacity. Available in various sizes. Can be used without cable ties. The HP plastic clamps are used in many industries for permanent or temporary cable fastenings. Their low weight makes the clamps particularly suitable for the aviation or automotive industries. They ensure that the overall weight is minimized while maintaining a strong fastening solution.
Sales unit: 1000 pieces
Lieske Part No.: 402498

HP fastening clamps made of polyamide. Good temperature resistance and high load capacity. Available in various sizes. Can be used without cable ties. The HP plastic clamps are used in many industries for permanent or temporary cable fastenings. Their low weight makes the clamps particularly suitable for the aviation or automotive industries. They ensure that the overall weight is minimized while maintaining a strong fastening solution.
Sales unit: 1000 pieces
Lieske Part No.: 197370

Type: H9P-N66-NA-M1
Sales unit: 1000 pc
Sales unit: 1000 pieces
Lieske Part No.: 277063

HP fastening clamps made of polyamide. Good temperature resistance and high load capacity. Available in various sizes. Can be used without cable ties. The HP plastic clamps are used in many industries for permanent or temporary cable fastenings. Their low weight makes the clamps particularly suitable for the aviation or automotive industries. They ensure that the overall weight is minimized while maintaining a strong fastening solution.
Sales unit: 1000 pieces
Lieske Part No.: 551459

Type: H11P-N66-NA-M1
Sales unit: 1000 pc
Sales unit: 1000 pieces
Lieske Part No.: 725103

HP fastening clamps made of polyamide. Good temperature resistance and high load capacity. Available in various sizes. Can be used without cable ties. The HP plastic clamps are used in many industries for permanent or temporary cable fastenings. Their low weight makes the clamps particularly suitable for the aviation or automotive industries. They ensure that the overall weight is minimized while maintaining a strong fastening solution.
Sales unit: 1000 pieces
Lieske Part No.: 828374

Type: H13P-N66-NA-D1
Sales unit: 500 pc
Sales unit: 500 pieces
Lieske Part No.: 753678

HP fastening clamps made of polyamide. Good temperature resistance and high load capacity. Available in various sizes. Can be used without cable ties. The HP plastic clamps are used in many industries for permanent or temporary cable fastenings. Their low weight makes the clamps particularly suitable for the aviation or automotive industries. They ensure that the overall weight is minimized while maintaining a strong fastening solution.
Sales unit: 500 pieces
Lieske Part No.: 241753

HP fastening clamps made of polyamide. Good temperature resistance and high load capacity. Available in various sizes. Can be used without cable ties. The HP plastic clamps are used in many industries for permanent or temporary cable fastenings. Their low weight makes the clamps particularly suitable for the aviation or automotive industries. They ensure that the overall weight is minimized while maintaining a strong fastening solution.
Sales unit: 500 pieces
Lieske Part No.: 599758

Type: H16P PA66 NA 500 ST
Sales unit: 500 pc
Sales unit: 500 pieces
Lieske Part No.: 182471

Type: H17P-N66-NA-G1
Sales unit: 250 pc
Sales unit: 250 pieces
Lieske Part No.: 706951

HP fastening clamps made of polyamide. Good temperature resistance and high load capacity. Available in various sizes. Can be used without cable ties. The HP plastic clamps are used in many industries for permanent or temporary cable fastenings. Their low weight makes the clamps particularly suitable for the aviation or automotive industries. They ensure that the overall weight is minimized while maintaining a strong fastening solution.
Sales unit: 250 pieces
Lieske Part No.: 239161

Type: 4D10 POM BK 100 ST
Sales unit: 10000 pc
Sales unit: 10000 pieces
Lieske Part No.: 387565

Screwable D-clips available in three sizes. Time- and cost-saving fastening. Simply push the cable into the holder. The bundled goods can be removed later. Three different drill diameters available.
Sales unit: 6000 pieces
Lieske Part No.: 2057134

Screwable D-clips available in three sizes. Time- and cost-saving fastening. Simply push the cable into the holder. The bundled goods can be removed later. Three different drill diameters available.
Sales unit: 8000 pieces
Lieske Part No.: 1133157

Schraubbare D-Clips in drei Größen erhältlich. Zeit- und kostensparende Befestigung. Einfaches Eindrücken des Kabels in den Halter. Späteres Entfernen des Bündelgutes möglich. Drei verschiedene Bohrdurchmesser lieferbar. Verkaufseinheit: 12000 ST.
Sales unit: 12000 pieces
Lieske Part No.: 1279840

Screwable D-clips available in three sizes. Time- and cost-saving fastening. Simply push the cable into the holder. The bundled goods can be removed later. Three different drill diameters available.
Sales unit: 60000 pieces
Lieske Part No.: 986172

Screwable D-clips available in three sizes. Time- and cost-saving fastening. Simply push the cable into the holder. The bundled goods can be removed later. Three different drill diameters available.
Sales unit: 12000 pieces
Lieske Part No.: 1236686

Screwable D-clips available in three sizes. Time- and cost-saving fastening. Simply push the cable into the holder. The bundled goods can be removed later. Three different drill diameters available.
Sales unit: 7800 pieces
Lieske Part No.: 2057135

Screwable D-clips available in three sizes. Time- and cost-saving fastening. Simply push the cable into the holder. The bundled goods can be removed later. Three different drill diameters available.
Sales unit: 8000 pieces
Lieske Part No.: 1565555

The Klam-Klip holds and guides lines twist and stable. It consists of an upper and a lower part which are connected to a flap. This facilitates handling and protects against loss of the two parts. An additional pass stop ensures that the top and bottom part does not rotate during the screwing each other. Type: CC1-N66-BK-D1 item: 500 ST.
Sales unit: 500 pieces
Lieske Part No.: 557376

The Klam-Klip holds and guides lines twist and stable. It consists of an upper and a lower part which are connected to a flap. This facilitates handling and protects against loss of the two parts. An additional pass stop ensures that the top and bottom part does not rotate during the screwing each other. Type: CC2-N66-BK-D1 item: 500 ST.
Sales unit: 500 pieces
Lieske Part No.: 677748

Twist-proof routing of cables. Upper and lower sections connected by a tab. Easy handling including twist protection. Strain relief clamps for routing cables with a bundle diameter of up to 8.5 mm. The strain relief clamp is attached to the corresponding mounting surface using an M4 screw.
Sales unit: 500 pieces
Lieske Part No.: 438335

TY3P1 and TY8P1 (one-piece), with integrated pin for pressing in. TY8P2 (two-piece), with mushroom head design for better assembly. Expanding rivets can be used wherever quick assembly and low weight offer advantages, e.g. in series production and in control cabinet construction.
Sales unit: 10000 pieces
Lieske Part No.: 1580412

Type: G51PAA PE NA 1 RO
Sales unit: 1 pc
Lieske Part No.: 874604

Flexiform edge protection
Highly flexible edge protection for applications where cables or wires
through sharp-edged cut-outs (eg sheets) must be performed.
edge protection, polyethylene
Color: Natural
for sheet metal thickness: 1,3-2,4 Type: G51P-B-PE-NA


Quantity: 1 unit.
Lieske Part No.: 621448

Of the U-profile open toothed, highly flexible edge protection is simply applied to the panel edge and pass-to-bumper processed without sticking. With the tight shape of the rail Flexiform edge protection for cables, mechanical protection is achieved. Type: G51P-D-PE-NA Quantity: 1 ea.
Lieske Part No.: 366809

Very flexible. Easy and safe to process without glue. Offers effective and visually clean protection. Flexiform G51P made of polyethylene (PE) is the all-purpose edge protection. Flexiform G51N made of polyamide 6 (PA6) offers very good abrasion protection. Flexiform G51T made of polytetrafluoroethylene (PTFE) has excellent resistance to high temperatures and many chemicals. Flexiform edge protection is used to protect cables or lines that have to be routed through sheet metal cuts or hard-edged punched outlets in chassis or device construction.
Lieske Part No.: 964875

Of the U-profile open toothed, highly flexible edge protection is simply applied to the panel edge and pass-to-bumper processed without sticking. With the tight shape of the rail Flexiform edge protection for cables, mechanical protection is achieved. Type: G5
PG-PE-NA Quantity:
ST.
Lieske Part No.: 780634

Of the U-profile open toothed, highly flexible edge protection is simply applied to the panel edge and pass-to-bumper processed without sticking. With the tight shape of the rail Flexiform edge protection for cables, mechanical protection is achieved. Type: G5
PH-PE-NA Quantity:
ST.
Lieske Part No.: 968116

Very flexible. Easy and safe to process without adhesive. Very good abrasion resistance. Tight-fitting molded rail. Visually clean protection. Flexiform edge protection is used to protect cables or lines that have to be routed through sheet metal cuts or hard-edged punching exits in chassis or device construction.
Lieske Part No.: 359692

Very flexible. Easy and safe to process without adhesive. Very good abrasion resistance. Tight-fitting molded rail. Visually clean protection. Flexiform edge protection is used to protect cables or lines that have to be routed through sheet metal cuts or hard-edged punching exits in chassis or device construction.
Lieske Part No.: 733158

Very flexible. Easy and safe to process without adhesive. Very good abrasion resistance. Tight-fitting molded rail. Visually clean protection. Flexiform edge protection is used to protect cables or lines that have to be routed through sheet metal cuts or hard-edged punching exits in chassis or device construction.
Lieske Part No.: 556303

Very flexible. Easy and safe to process without adhesive. Very good abrasion resistance. Tight-fitting molded rail. Visually clean protection. Flexiform edge protection is used to protect cables or lines that have to be routed through sheet metal cuts or hard-edged punching exits in chassis or device construction.
Lieske Part No.: 443739

Very flexible. Easy and safe to process without adhesive. Very good abrasion resistance. Tight-fitting molded rail. Visually clean protection. Flexiform edge protection is used to protect cables or lines that have to be routed through sheet metal cuts or hard-edged punching exits in chassis or device construction.
Lieske Part No.: 148313

Type: G51NF PA6 NA 1 RO
Sales unit: 1 pc
Lieske Part No.: 957947

Very flexible. Easy and safe to process without adhesive. Very good abrasion resistance. Tight-fitting molded rail. Visually clean protection. Flexiform edge protection is used to protect cables or lines that have to be routed through sheet metal cuts or hard-edged punching exits in chassis or device construction.
Sales unit: 10 pieces
Lieske Part No.: 1580405

Type: G51TA PTFE NA 1 RO
Sales unit: 1 pc
Lieske Part No.: 951930

Very flexible. Easy and safe to process without adhesive. Excellent protection at high temperatures. Resistant to a wide range of chemicals. Tight-fitting molded rail. Visually clean protection. Flexiform edge protection is used to protect cables or lines that have to be routed through sheet metal cuts or hard-edged punching exits in chassis or device construction.
Lieske Part No.: 511604

Type: G51TC PTFE NA 1 RO
Sales unit: 1 pc
Lieske Part No.: 734329

Of the U-profile open toothed, highly flexible edge protection is simply applied to the panel edge and pass-on-shock processed without sticking. With the tight shape of the rail Flexiform edge protection for cables, mechanical protection is achieved. Type: G5
TG-PTFE-NA Quantity:
ST.
Lieske Part No.: 108000

HIS Service Station offers space for 5 HIS boxes. Light and stable. Practical storage at the workplace. Can be attached to the wall. Special scissors make it easier to cut the hoses to length. HIS offers a complete range of 2:1 and 3:1 shrink tubing in small packages for practical storage in the HIS Service Station. All HIS shrink tubing is available in 3 m to 10 m lengths in practical dispenser boxes for the HIS Service Station. This means that the type, color and size of the hoses required can be selected quickly and easily and put together individually.
Lieske Part No.: 916166

HIS-Service-Station bietet Platz für 6 HIS-Boxen. leicht und stabil. Ideale Aufbewahrung am Arbeitsplatz. Befestigung an der Wand möglich. Spezialschere erleichtert das Ablängen der Schläuche. Praktisches Lineal auf dem Label für das exakte Ablängen von Schrumpfschlauchabschnitten. HIS bietet ein vollständiges Sortiment an 2:1 und 3:1 Schrumpfschläuchen in Kleinstverpackungen zur praktischen Aufbewahrung in der HIS-Service-Station. Alle HIS-Schrumpfschläuche werden in 3 m bis 10 m Längen in praktischen Spender Kartons für die HIS-Service-Station angeboten. So können Typ, Farbe und Größe der benötigten Schläuche schnell und einfach ausgewählt und individuell zusammengestellt werden. Verkaufseinheit: 1 ST.
Lieske Part No.: 157050

Special packs HIS
Material: Polyolefin (PEX), cross-linked
Color: various
Change after shrinkage: - 5% max.
Operating temperature: -55 ° C to +135 ° C
Shrink temperature: From +120 ° C
Insulation class: B (VDE 0530)
Dielectric strength to IEC 684 P2 25kV/mm
Flammability: self-extinguishing

These radiation-crosslinked polyolefin shrink tubing are also 5 m
and 10 m rolls available in cardboard boxes. The product com-
st six different colors and diameter of 1.2 to 25.4 mm.
The thin, flexible tubes are self-extinguishing.

Applications
HIS Universal shrink reliably isolate and protect
against corrosion and mechanical influences. The handy packaging
for the small and medium demand makes the application site
particularly easy. In sturdy HIS rack made of metal with chained
Special scissors are different sizes and colors at your fingertips.
His pack black
Color: black
Degree n completely empty. Shrinkage Ø D max. / W. nom: 0.6 / 0.4
Size: 3/162,6 cm ( 64 inch )

Type: HIS-3/64-PEX-BK
Quantity: 1 unit.
Lieske Part No.: 424465