Installation Material from HellermannTyton

Type: HA67-88,9/17,1-PEX-B
Sales unit: 1 pc
Sales unit: 2 pieces
Lieske Part No.: 427163

Thick-walled: very good abrasion, kinking and cut protection. 6:1 covers a very wide range of applications, very high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Resistant to solvents, acids and alkalis. Halogen-free. HA67 is particularly suitable for mechanical protection, insulation and sealing with large diameter differences, complex connector configurations or difficult geometric shapes.
Lieske Part No.: 1235999

Thick-walled: very good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Resistant to solvents, acids and alkalis. Halogen-free. Packed in a sturdy display box. Barcode labeling per tube for quick and error-free billing. TREDUX HA47 is a thick-walled 4:1 shrink tube with thermoplastic inner adhesive. All TREDUX shrink tubes are offered in 1 m lengths in practical boxes for the TREDUX display. TREDUX HA47 is available in 6 sizes from 19 mm to 85 mm in display boxes. Even components with large diameter differences can be shrunk with TREDUX HA47 thanks to the advantageous 4:1 shrink ratio. In addition to resistance to solvents, acids and alkalis, TREDUX HA47 offers very good mechanical strength.
Lieske Part No.: 893760

Thick-walled: very good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Resistant to solvents, acids and alkalis. Halogen-free. Packed in a sturdy display box. Barcode labeling per tube for quick and error-free billing. TREDUX HA47 is a thick-walled 4:1 shrink tube with thermoplastic inner adhesive. All TREDUX shrink tubes are offered in 1 m lengths in practical boxes for the TREDUX display. TREDUX HA47 is available in 6 sizes from 19 mm to 85 mm in display boxes. Even components with large diameter differences can be shrunk with TREDUX HA47 thanks to the advantageous 4:1 shrink ratio. In addition to resistance to solvents, acids and alkalis, TREDUX HA47 offers very good mechanical strength.
Lieske Part No.: 102785

Medium wall: good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Very good fire protection properties. Resistant to solvents, acids and alkalis. UV and weather resistant. Approved for shipping. MA40 is a medium wall 4:1 shrink tubing with inner adhesive for the optimal protection and insulation of cables and lines in shipbuilding and maritime applications. In addition to good fire protection properties, MA40 offers good UV, weather and salt water resistance.
Sales unit: 10 meters
Lieske Part No.: 2057424

Medium wall: good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Very good fire protection properties. Resistant to solvents, acids and alkalis. UV and weather resistant. Approved for shipping. MA40 is a medium wall 4:1 shrink tubing with inner adhesive for the optimal protection and insulation of cables and lines in shipbuilding and maritime applications. In addition to good fire protection properties, MA40 offers good UV, weather and salt water resistance.
Sales unit: 5 meters
Lieske Part No.: 991331

Medium wall: good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Very good fire protection properties. Resistant to solvents, acids and alkalis. UV and weather resistant. Approved for shipping. MA40 is a medium wall 4:1 shrink tubing with inner adhesive for the optimal protection and insulation of cables and lines in shipbuilding and maritime applications. In addition to good fire protection properties, MA40 offers good UV, weather and salt water resistance.
Sales unit: 4 meters
Lieske Part No.: 991338

Medium wall: good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Very good fire protection properties. Resistant to solvents, acids and alkalis. UV and weather resistant. Approved for shipping. MA40 is a medium wall 4:1 shrink tubing with inner adhesive for the optimal protection and insulation of cables and lines in shipbuilding and maritime applications. In addition to good fire protection properties, MA40 offers good UV, weather and salt water resistance.
Sales unit: 3 meters
Lieske Part No.: 1134306

Medium wall: good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Very good fire protection properties. Resistant to solvents, acids and alkalis. UV and weather resistant. Approved for shipping. MA40 is a medium wall 4:1 shrink tubing with inner adhesive for the optimal protection and insulation of cables and lines in shipbuilding and maritime applications. In addition to good fire protection properties, MA40 offers good UV, weather and salt water resistance.
Sales unit: 2 meters
Lieske Part No.: 1327346

Sales Unit: 240 ST.
Sales unit: 20 pieces
Lieske Part No.: 547862

Medium-walled shrink tubing. Shrinkage ratio 4:1 for a wide range of applications and high contact pressure. Thermoplastic inner adhesive for protection against moisture and for strain relief. Halogen-free. Resistant to solvents, acids and alkalis. Bar stock with a length of 1m. MA47 is a medium-walled 4:1 shrink tubing and is characterized by particularly good mechanical strength. The high shrinkage ratio and the inner adhesive protect plug-cable transitions from environmental influences and corrosion as well as from dust and dirt and also ensure high strain relief. MA47 offers protection for cables and lines against higher mechanical stress, e.g. above and below ground.
Lieske Part No.: 135233

Schrumpfschlauch mittelwandig. Schrumpfrate 4:1 für großen Anwendungsbereich und hohen Anpressdruck. thermoplastischer Innenkleber zum Schutz vor Feuchtigkeit und zur Zugentlastung. halogenfrei. Beständig gegen Lösungsmittel, Säuren und Laugen. Stangenware mit einer Länge von 1m. MA47 ist ein mittelwandiger 4:1 Schrumpfschlauch und zeichnet sich durch besonders gute mechanische Festigkeit aus. Das hohe Schrumpfverhältnis und der Innenkleber schützen Stecker-Kabel-Übergänge vor Umgebungseinflüssen und Korrosion sowie vor Staub und Schmutz und sorgen zudem für eine hohe Zugentlastung. MA47 bietet Schutz für Kabel und Leitungen vor höheren mechanischen Beanspruchungen, z. B. auf und unter der Erde. Verkaufseinheit: 24 ST.
Sales unit: 24 pieces
Lieske Part No.: 514725

The wall tubing MA47 medium wall is resistant to solvents, acids and alkaline solutions and offers especially good mechanical strength. The thermoplastic adhesive liner provides good moisture sealing and weathering.
TREDUX MA47 is packed in display boxes. The favorable length of 1 m sections allows individual configuration of the required hose sizes. Type: TREDUX-MA47-50/16, 1M item: 2 ST.
Sales unit: 2 pieces
Lieske Part No.: 112280

Medium wall: good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Resistant to solvents, acids and alkalis. Halogen-free. Packed in a sturdy display box. Barcode labeling per tube for quick and error-free billing. TREDUX MA47 is a medium wall 4:1 shrink tube with thermoplastic inner adhesive. All TREDUX shrink tubes are offered in 1 m lengths in practical boxes for the TREDUX display. TREDUX MA47 is available in 8 sizes from 12 mm to 95 mm in display boxes. Even components with large diameter differences can be shrunk with TREDUX MA47 thanks to the advantageous 4:1 shrink ratio. In addition to resistance to solvents, acids and alkalis, TREDUX MA47 offers good mechanical strength.
Sales unit: 2 pieces
Lieske Part No.: 195114

Medium wall: good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Resistant to solvents, acids and alkalis. Halogen-free. Packed in a sturdy display box. Barcode labeling per tube for quick and error-free billing. TREDUX MA47 is a medium wall 4:1 shrink tube with thermoplastic inner adhesive. All TREDUX shrink tubes are offered in 1 m lengths in practical boxes for the TREDUX display. TREDUX MA47 is available in 8 sizes from 12 mm to 95 mm in display boxes. Even components with large diameter differences can be shrunk with TREDUX MA47 thanks to the advantageous 4:1 shrink ratio. In addition to resistance to solvents, acids and alkalis, TREDUX MA47 offers good mechanical strength.
Sales unit: 2 pieces
Lieske Part No.: 704311

Medium wall: good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Resistant to solvents, acids and alkalis. Halogen-free. Packed in a sturdy display box. Barcode labeling per tube for quick and error-free billing. TREDUX MA47 is a medium wall 4:1 shrink tube with thermoplastic inner adhesive. All TREDUX shrink tubes are offered in 1 m lengths in practical boxes for the TREDUX display. TREDUX MA47 is available in 8 sizes from 12 mm to 95 mm in display boxes. Even components with large diameter differences can be shrunk with TREDUX MA47 thanks to the advantageous 4:1 shrink ratio. In addition to resistance to solvents, acids and alkalis, TREDUX MA47 offers good mechanical strength.
Lieske Part No.: 902620

Viton ®-E is a robust high performance hose of very flexible fluoroelastomer, which is characterized by extremely high temperature resistance. It remains flexible even at low temperatures. It has excellent electrical, chemical and mechanical properties and is resistant to fuels and lubricants. The hose is VG-approved. Type: VITONE-1/8-FPM-BK item: 50 MTR
Sales unit: 50 meters
Lieske Part No.: 393900

Viton ®-E is a robust high performance pants of very flexible fluoroelastomer, Which is Characterized by extremely high temperature resistance. It remains flexible even at low temperatures. It has excellent electrical, chemical and mechanical properties and is resistant to fuels and lubricants. The pant is VG-approved. Type: VITONE-1/4-FPM-BK item: 50 MTR
Sales unit: 50 meters
Lieske Part No.: 694580

Viton ®-E is a robust high performance hose of very flexible fluoroelastomer, which is characterized by extremely high temperature resistance. It remains flexible even at low temperatures. It has excellent electrical, chemical and mechanical properties and is resistant to fuels and lubricants. The hose is VG-approved. Type: VITONE-3/8-FPM-BK item: 25 MTR
Sales unit: 25 meters
Lieske Part No.: 390590

Standard wall (between thin and medium wall). Excellent mechanical and chemical resistance at very high temperatures. Highly resistant to fuels and lubricants. Very good fire protection properties. Approved for military technology. Viton-E is ideally suited for use in motorsports and generally in the engine compartment of vehicles due to its excellent mechanical and chemical resistance at high temperatures. Due to its excellent properties under extreme loads, the shrink tubing can be used in many different ways, e.g. in aviation and military technology.
Sales unit: 25 meters
Lieske Part No.: 524196

Viton ®-E is a robust high performance hose of very flexible fluoroelastomer, which is characterized by extremely high temperature resistance. It remains flexible even at low temperatures. It has excellent electrical, chemical and mechanical properties and is resistant to fuels and lubricants. The hose is VG-approved. Type: VITONE-3/4-FPM-BK item: 25 MTR
Sales unit: 25 meters
Lieske Part No.: 879057

Viton ®-E is a robust high performance hose of very flexible fluoroelastomer, which is characterized by extremely high temperature resistance. It remains flexible even at low temperatures. It has excellent electrical, chemical and mechanical properties and is resistant to fuels and lubricants. The hose is VG-approved. Type: VITONE-
FPM-BK-item: 25 MTR
Sales unit: 25 meters
Lieske Part No.: 803711

Standard wall (between thin and medium wall). Excellent mechanical and chemical resistance at very high temperatures. Highly resistant to fuels and lubricants. Very good fire protection properties. Approved for military technology. Viton-E is ideally suited for use in motorsports and generally in the engine compartment of vehicles due to its excellent mechanical and chemical resistance at high temperatures. Due to its excellent properties under extreme loads, the shrink tubing can be used in many different ways, e.g. in aviation and military technology.
Sales unit: 75 meters
Lieske Part No.: 2054883

Viton ®-E is a robust high performance hose of very flexible fluoroelastomer, which is characterized by extremely high temperature resistance. It remains flexible even at low temperatures. It has excellent electrical, chemical and mechanical properties and is resistant to fuels and lubricants. The hose is VG-approved. Type: VITONE-2-FPM-BK Quantity:
5 MTR
Sales unit: 75 meters
Lieske Part No.: 806931

Quantity: 25 ST.
Sales unit: 125 pieces
Lieske Part No.: 914894

Type: TF31-1.5/0.5 PEX BK 300 M
Sales unit: 300 MTR
Sales unit: 300 meters
Lieske Part No.: 132971

Thin-walled: flexible, lightweight, space-saving. 3:1 covers a larger application area, increased contact pressure. Very good fire protection properties. Fast shrinking. Low shrink temperature. Wide variety of colors and sizes. TF31 is used where increased fire protection requirements are required. It can be used for insulating and sheathing cables and lines.
Sales unit: 150 meters
Lieske Part No.: 2055817

Type: TF31-12/4 PEX BK 100 M
Sales unit: 100 MTR
Sales unit: 100 meters
Lieske Part No.: 854495

Type: TF31-40/13 PEX BK 60 M
Sales unit: 60 MTR
Sales unit: 60 meters
Lieske Part No.: 356838

Sales unit: 1 MTR
Sales unit: 30 meters
Lieske Part No.: 221321

Thin-walled: flexible, lightweight, space-saving. 3:1 covers a larger application area, increased contact pressure. Very good fire protection properties. Fast shrinking. Low shrink temperature. Wide variety of colors and sizes. TF31 is used where increased fire protection requirements are required. It can be used for insulating and sheathing cables and lines.
Sales unit: 30 meters
Lieske Part No.: 1324302

Thin-walled: flexible, light, space-saving. 3:1 covers a larger application area, increased contact pressure. Transparent even after complete shrinkage. Good mechanical and chemical resistance. Protects markings optimally. High dielectric strength. Halogen-free. TF34 is ideal for protecting markings and remains transparent even after complete shrinkage. Possible mechanical and chemical damage to the markings is prevented and the marking remains legible for longer.
Sales unit: 30 meters
Lieske Part No.: 1241691

Thin-walled: flexible, lightweight, space-saving. 3:1 covers a larger application area, increased contact pressure. Very good fire protection properties. Fast shrinking. Low shrink temperature. Wide variety of colors and sizes. TF31 is used where increased fire protection requirements are required. It can be used for insulating and sheathing cables and lines.
Sales unit: 30 meters
Lieske Part No.: 1565144

Thin-walled: flexible, lightweight, space-saving. 3:1 covers a larger application area, increased contact pressure. Very good fire protection properties. Fast shrinking. Low shrink temperature. Wide variety of colors and sizes. TF31 is used where increased fire protection requirements are required. It can be used for insulating and sheathing cables and lines.
Sales unit: 30 meters
Lieske Part No.: 1241690

The high shrink ratio of TF3
it possible to shrink-large diameter differences. Only six sizes cover cable diameter
mm from up to 33mm, so that a reduced procurement costs and reduced space requirement results. TF3
is also characterized by good fire-protection properties and is UL VW
admitted.The roles of 3 m are particularly suitable for the average needs. Type: TF3
-3 /
3-BK-M item: 3 MTR
Sales unit: 30 meters
Lieske Part No.: 105374

The high shrink ratio of TF31 it possible to shrink-large differences in diameter.
Typical applications include the isolation and identification of cables and wires, and protection against duty harnesses. Inventory can be reduced significantly as only a few sizes cover a wide number of cable diameters.
Type: TF31-3 / 1-RD
Quantity: 30 MTR
Sales unit: 30 meters
Lieske Part No.: 367817

Thin-walled: flexible, light, space-saving. 3:1 covers a larger application area, increased contact pressure. Transparent even after complete shrinkage. Good mechanical and chemical resistance. Protects markings optimally. High dielectric strength. Halogen-free. TF34 is ideal for protecting markings and remains transparent even after complete shrinkage. Possible mechanical and chemical damage to the markings is prevented and the marking remains legible for longer.
Sales unit: 150 meters
Lieske Part No.: 977087

Type: TF31-3/1 PEX YE 30 M
Sales unit: 30 MTR
Sales unit: 30 meters
Lieske Part No.: 664936

The high shrink ratio of TF31 it possible to shrink-large differences in diameter.
Typical applications include the isolation and identification of cables and wires, and protection against duty harnesses. Inventory can be reduced significantly as only a few sizes cover a wide number of cable diameters.
Type: TF31-3 / 1-GN
Quantity: 30 MTR
Sales unit: 30 meters
Lieske Part No.: 137345

Type: TF3
-3 /
PEX BU 3 M item: 3 MTR
Sales unit: 30 meters
Lieske Part No.: 930349

Quantity: 30 MTR
Sales unit: 150 meters
Lieske Part No.: 932969

Thin-walled: flexible, lightweight, space-saving. 3:1 covers a larger application area, increased contact pressure. Very good fire protection properties. Fast shrinking. Low shrink temperature. Wide variety of colors and sizes. TF31 is used where increased fire protection requirements are required. It can be used for insulating and sheathing cables and lines.
Sales unit: 30 meters
Lieske Part No.: 1241689

The high shrink ratio TF31 of permits for shrink to large differences in diameter. Only six sizes cover cable diameter from 1mm to 33mm, so that a reduced procurement costs and reduced space requirement. TF31 is also characterized by very good fire protection properties and is UL approved RV1. The roles of 30m are particularly suitable for the average needs. Type: TF31-6 / 2-BK-30M item: 30 MTR
Sales unit: 30 meters
Lieske Part No.: 669537

Thin-walled: flexible, lightweight, space-saving. 3:1 covers a larger application area, increased contact pressure. Very good fire protection properties. Fast shrinking. Low shrink temperature. Wide variety of colors and sizes. TF31 is used where increased fire protection requirements are required. It can be used for insulating and sheathing cables and lines.
Sales unit: 30 meters
Lieske Part No.: 2056041

The highly flexible, halogen-free heat-shrink tubing TF34 has very good insulating properties. TF34 is optimal for protecting identification solutions, as the hose remains transparent even after complete shrinkage.
Type: TF34-6 / 2-CL
Quantity: 30 MTR
Sales unit: 60 meters
Lieske Part No.: 921016

Type: TF31-6 / 2 PEX YE 30 M item: 30 MTR
Sales unit: 30 meters
Lieske Part No.: 769546

Sales unit: 1 MTR
Sales unit: 30 meters
Lieske Part No.: 973420

Thin-walled: flexible, lightweight, space-saving. 3:1 covers a larger application area, increased contact pressure. Very good fire protection properties. Fast shrinking. Low shrink temperature. Wide variety of colors and sizes. TF31 is used where increased fire protection requirements are required. It can be used for insulating and sheathing cables and lines.
Sales unit: 30 meters
Lieske Part No.: 1565143

Dünnwandig: flexibel, leicht, platzsparend. 3:1 deckt größeren Anwendungsbereich ab, erhöhter Anpressdruck. Sehr gute Brandschutzeigenschaften. Schnell schrumpfend. Niedrige Schrumpftemperatur. Große Vielfalt an Farben und Größen. TF31 findet dort Verwendung, wo erhöhte Anforderungen an den Brandschutz gestellt werden. Er kann zur Isolierung und Ummantelung von Kabeln und Leitungen verwendet werden. Verkaufseinheit: 30 MTR
Sales unit: 30 meters
Lieske Part No.: 500224

The high shrink ratio of TF31 it possible to shrink-large diameter differences.
Typical applications include the isolation and identification of cables and wires, and protection against duty harnesses. Inventory can be reduced significantly as only a few sizes cover a wide number of cable diameters.
Type: TF31-6 / 2-WH
Quantity: 30 MTR
Sales unit: 30 meters
Lieske Part No.: 550888