Installation Material from Erico

Designed for permanent protection and access to critical utility infrastructure. Suitable for most earthing and lightning protection systems.
Lieske Part No.: 497022

Threadless compression connector for use with pointed copper-sheathed grounding rods. It is conical and forms an irreversible conductive connection. It is made of bronze and is used for 3/4' grounding rods.
Lieske Part No.: 1320457

Threaded coupling for use with threaded copper-sheathed grounding rods. They are corrosion-resistant couplings that ensure permanent, low-resistance Cu-Cu connections. They are used for 1/2' grounding rods.
.
Lieske Part No.: 2068281

Vorgefertigte Baugruppe einschließlich Erdungsklemme mit Anschlussstück. Sie passt zu einem Erdungsstange mit einem Durchmesser von 5/8' und 25 mm² Litzenleiter. Verkaufseinheit: 50 ST.
Sales unit: 50 pieces
Lieske Part No.: 1280053

Includes two punches with springs, nuts and washers.
Lieske Part No.: 320353

Attaching threaded rods to beam flanges. Threaded rod hanger can be moved vertically downwards. Only requires a hammer for installation.
Sales unit: 100 pieces
Lieske Part No.: 1262571

Attaching threaded rods to beam flanges. Threaded rod hanger can be moved vertically downwards. Only requires a hammer for installation.
Sales unit: 100 pieces
Lieske Part No.: 1262572

Attaching threaded rods to beam flanges. Threaded rod hanger can be moved vertically downwards. Only requires a hammer for installation.
Sales unit: 100 pieces
Lieske Part No.: 1262613

Attaching threaded rods to beam flanges. Threaded rod hanger can be moved vertically downwards. Only requires a hammer for installation.
Sales unit: 100 pieces
Lieske Part No.: 1262569

Pipe diameter 18-30 mm
Flange thickness: 3-8 mm

Type: 812M24SM
Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 558227

Pipe diameter 18-30 mm
Flange thickness: 8-14 mm

Type: 812M58SM
Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 682414

Pipe diameter 18-30 mm
Flange thickness: 14-20 mm

Type: 812M912SM
Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 357040

For securing conduits/pipes or cables from support flanges. The clamp can be rotated a full 360°. Only requires a hammer for installation.
Sales unit: 50 pieces
Lieske Part No.: 2068470

Tube diameter
8-3 mm flange thickness: 3-8 mm Type: 8
2EM24 item:
ST.
Sales unit: 50 pieces
Lieske Part No.: 879918

Tube diameter
8-3 mm flange thickness: 8 -
4 mm Type: 8
2EM58 item:
ST.
Sales unit: 10 pieces
Lieske Part No.: 790463

Pipe diameter 18-30 mm
Flange thickness: 14-20 mm

Type: 812EM912
Item: 50 ST.
Sales unit: 50 pieces
Lieske Part No.: 342946

For securing conduits/pipes or cables from support flanges. The clamp can be rotated a full 360°. Only requires a hammer for installation.
Sales unit: 100 pieces
Lieske Part No.: 1349316

Side-mounted cable protection pipe clip for use with standard flange thicknesses. 18-30mm side mounting, cable protection pipe with support clamp for max. 16mm flange.
Sales unit: 100 pieces
Lieske Part No.: 273251

Cable protection pipe clip with snap lock for use with standard flange thicknesses. 18-30mm mounting on the lower flange, cable protection pipe with support clamp for max. 16 mm flange.
Sales unit: 100 pieces
Lieske Part No.: 535869

Attachment to beams and C-roof purlins. Threaded rod support. Threaded rod hanger can be moved vertically downwards.
Sales unit: 100 pieces
Lieske Part No.: 900136

For suspending installations from grid ceiling profiles. No tools required for installation. Fast, easy and safe twist installation. To reduce scratches on grid ceiling profiles. Wing nut included.
Sales unit: 100 pieces
Lieske Part No.: 543713

Can be used to attach junction boxes, fasteners or other applications to beam flanges. Captive set screw minimizes the need for additional components. Multiple attachment points available to reduce inventory. Only requires a hammer for installation.
Sales unit: 100 pieces
Lieske Part No.: 1311246

Can be used to attach junction boxes, fasteners or other applications to beam flanges. Captive set screw minimizes the need for additional components. Multiple attachment points available to reduce inventory. Only requires a hammer for installation.
Sales unit: 100 pieces
Lieske Part No.: 1311245

Can be used to attach junction boxes, fasteners or other applications to beam flanges. Captive set screw minimizes the need for additional components. Multiple attachment points available to reduce inventory. Only requires a hammer for installation.
Sales unit: 100 pieces
Lieske Part No.: 1311237

ERICO Accessories for snap clip 24 ..
Adapter
Flange thickness: 13-20 mm

Type: SCA
Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 108662

Offers a mobile mounting hole. It is attached to the trapezoidal ceiling without drilling or punching holes. It is hung on the overlap joint of the trapezoidal sheets.
Sales unit: 100 pieces
Lieske Part No.: 985839

The fastening is carried out without drilling or punching holes in the trapezoidal ceiling. Threaded rod supports.
Sales unit: 100 pieces
Lieske Part No.: 2068220

Mounting system BTF A successful combination for laying the cable in steel beams flange thickness: 3-8 mm Type: BTF24 item:
ST.
Sales unit: 10 pieces
Lieske Part No.: 537409

BTF fixing system
A perfect combination for a
Cable laying ships of steel beams
Flange thickness: 8-14 mm

Type: BTF58
Quantity: 1 unit.
Sales unit: 10 pieces
Lieske Part No.: 192377

For quick fastening of pipes, cable ducts, MC/AC cables and tubes to wall surfaces. The cable duct is pressed into the clamp. Eliminates the need for compensating bends when laying cable ducts. The flat design minimizes the risk of collisions during further assembly or installation work. Safe with bolt setting tools, concrete screw anchors or cordless screwdrivers.
Sales unit: 100 pieces
Lieske Part No.: 1259203

Metal can with removable carrying case. Recommended for carrying tools, crucibles, welding material and propane torch for making nVent ERICO Cadweld joints.
Lieske Part No.: 1320615

Cadweld F20 welding material is mainly used for grounding and bonding. It is poured from the blue tube into the welding crucible and ignited with a flint igniter. Contents approx. 65g welding material and some starting material.
Sales unit: 20 pieces
Lieske Part No.: 1320456

Cadweld F20 welding material is mainly used for grounding and bonding. It is poured from the blue tube into the welding crucible and ignited with a flint igniter. Contents approx. 90g welding material and some starting material.
Lieske Part No.: 1320621

Cadweld F20 welding material is mainly used for grounding and bonding. It is poured from the blue tube into the welding crucible and ignited with a flint igniter. Contents approx. 115g welding material and some starting material.
Sales unit: 10 pieces
Lieske Part No.: 1320620

Cadweld F20 welding material is mainly used for grounding and bonding. It is poured from the blue tube into the welding crucible and ignited with a flint igniter. Contents approx. 150g welding material and some starting material.
Lieske Part No.: 1320619

Cadweld F20 welding material is mainly used for grounding and bonding. It is poured from the blue tube into the welding crucible and ignited with a flint igniter. Contents approx. 200g welding material and some starting material.
Sales unit: 10 pieces
Lieske Part No.: 1320618

Ideal for sealing hot or cold crucibles to prevent leakage from large stranded conductors. Extends mold life when the cable opening becomes worn. Required for certain nVent ERICO Cadweld crucibles such as Type HA, HB, HC, VG and VN.
Lieske Part No.: 1320616

ERICO CADDY H-brace zinc coating (standard) Also available in stainless steel. Flange thickness: 2-3 mm Max load: 7 kg Type: 2H4 item:
ST.
Lieske Part No.: 903492

Tool-free universal fastening for mesh cable trays to standard strut mounting rails. Works with wire diameters from 4 to 8 mm.
Sales unit: 100 pieces
Lieske Part No.: 1261875

ERICO CADDY H-brace zinc coating (standard) Also available in stainless steel. Flange thickness: 3-8 mm Max load: 9 kg Type: 4H24 sales unit:
ST.
Lieske Part No.: 868365

CADDY H-brace
ERICO zinc coating (standard)
Also available in stainless steel.
Flange thickness: 8-14 mm
Max Load: 90 kg Type: 4H58 item: 100 ST.
Lieske Part No.: 110156

CADDY H-brace
ERICO zinc coating (standard)
Also available in stainless steel.
Flange thickness: 14-20 mm
Maximum load: 90 kg

Type: 4H912
Item: 100 ST.
Lieske Part No.: 403764

Provides attachment for wire, nVent CADDY Speed Link or other assemblies to flanges and extrusions. Fits most beams. Installs easily with a hammer.
Sales unit: 50 pieces
Lieske Part No.: 1349317

CADDY EM-clamp connections ERICO two zinc coating Also available in stainless steel flange thickness: 3-8 mm Max load: 45 kg Type: EM24 item:
ST.
Lieske Part No.: 950143

CADDY EM clamp
two ports
ERICO zinc coating
Also available in stainless steel
flange thickness: 8-14 mm
Max Load 45 kg Type: EM58 sales unit: 1 unit.
Lieske Part No.: 110181

CADDY EM-clamp connections ERICO two zinc coating available in stainless steel flange thickness:
4-2 mm Max load: 45 kg Type: EM9
2 Quantity:
ST.
Lieske Part No.: 983118

Can be used to attach junction boxes, fasteners or other applications to beam flanges. Multiple attachment points available to reduce inventory. Only requires a hammer for installation.
Lieske Part No.: 2068468

Can be used for both vertical and horizontal installations. Eliminates the need for compensating bends when installing conduit. Finger tightens, no tools required.
Lieske Part No.: 2068139

Can be used to attach junction boxes, fasteners or other applications to beam flanges. Captive set screw minimizes the need for additional hardware. Fits most beams. Requires only a hammer for installation.
Sales unit: 100 pieces
Lieske Part No.: 565492

CADDY Hi bracket
ERICO zinc coating
Flange thickness: 3-8 mm
Max load: 15 kg

Type: 4H24I
Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 618316