Installation Material from Erico

Multifunctional C-clamp for use with large flange thicknesses. Stainless steel, for 17-30 mm flanges. Can be combined with C-CR clamps for pipes, cable protection pipes or cables and with square nuts for threaded rods.
Sales unit: 100 pieces
Lieske Part No.: 857080

C-clamp. For use with cable/conduit/pipe clamp or square washer for multi-function C-clamp.
Sales unit: 50 pieces
Lieske Part No.: 353177

Square nut for C-clamp. Exact fit in C-clamp, nuts do not rotate during installation.
Sales unit: 100 pieces
Lieske Part No.: 165891

Square nut for C-clamp. Exact fit in C-clamp, nuts do not rotate during installation.
Sales unit: 100 pieces
Lieske Part No.: 482258

Square nut for C-clamp. Exact fit in C-clamp, nuts do not rotate during installation.
Sales unit: 100 pieces
Lieske Part No.: 128121

Square nut for C-clamp. Exact fit in C-clamp, nuts do not rotate during installation.
Sales unit: 100 pieces
Lieske Part No.: 997144

Protects the paintwork of steel beams.
Sales unit: 100 pieces
Lieske Part No.: 324599

Protects the paintwork of steel beams.
Sales unit: 100 pieces
Lieske Part No.: 534349

CADDY kit INC8
Version: M8 Type: INC8


Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 651551

CADDY CR-clamp
C in combination with brackets
available in stainless steel
Rohrdurchmeser: 16,0 - 20,0 mm

Type: CR17

Sales unit: 200 pieces
Lieske Part No.: 417809

CADDY CR-clamp in combination with C clips also available in stainless steel pipe diameter: 2, 4 -, 25,8 mm Type: CR2

ST.
Sales unit: 100 pieces
Lieske Part No.: 751106

CADDY CR-clamp
C in combination with brackets
available in stainless steel
Tube diameter: 26.9 to 31.8 mm

Type: CR28
Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 257952

Captive threaded pin minimizes the need for additional components.
Sales unit: 100 pieces
Lieske Part No.: 1264096

CADDY CR-clamp
in combination with C clips
also available in stainless steel
Rohrdurchmeser: 33.7 to 38.0 mm Type: CR37


Quantity: 1 unit.
Sales unit: 50 pieces
Lieske Part No.: 697311

CADDY CR-clamp
C in combination with brackets
available in stainless steel
Rohrdurchmeser: 40.0 to 44.5 mm

Type: CR42
Item: 50 ST.
Sales unit: 50 pieces
Lieske Part No.: 437038

Captive threaded pin minimizes the need for additional components.
Sales unit: 50 pieces
Lieske Part No.: 940858

CADDY CR-clamp
in combination with C clips
also available in stainless steel
Rohrdurchmeser: 59.3 to 63.5 mm Type: CR60


Quantity: 1 unit.
Sales unit: 25 pieces
Lieske Part No.: 231957

Captive threaded pin minimizes the need for additional components.
Sales unit: 200 pieces
Lieske Part No.: 699082

Captive threaded pin minimizes the need for additional components.
Sales unit: 100 pieces
Lieske Part No.: 524874

Captive threaded pin minimizes the need for additional components.
Sales unit: 100 pieces
Lieske Part No.: 666934

Captive threaded pin minimizes the need for additional components.
Sales unit: 50 pieces
Lieske Part No.: 950507

Captive threaded pin minimizes the need for additional components.
Sales unit: 50 pieces
Lieske Part No.: 607403

Pipe diameter 35-42 mm
Flange thickness: 2-3 mm

Sales unit: 25 pieces
Lieske Part No.: 1584353

Type: CR60-2

Sales unit: 250 pieces
Lieske Part No.: 221043

For fastening a single cable. For fastening to support flanges, angle irons, joists and other building elements.
Sales unit: 50 pieces
Lieske Part No.: 933723

For fastening a single cable protection pipe. For fastening to support flanges, angle irons, joists and other building elements.
Sales unit: 100 pieces
Lieske Part No.: 418548

For fastening a single cable protection pipe. For fastening to support flanges, angle irons, joists and other building elements.
Lieske Part No.: 2068184

One-piece cable/conduit clamp with protective shield. No screws or bolts to lose. Only requires a screwdriver or socket wrench to install. Fits into the open side of the strut mounting rail.
Lieske Part No.: 2068183

One-piece cable/conduit clamp with protective shield. No screws or bolts to lose. Only requires a screwdriver or socket wrench to install. Fits into the open side of the strut mounting rail.
Sales unit: 100 pieces
Lieske Part No.: 1427624

One-piece cable/conduit clamp with protective shield. No screws or bolts to lose. Only requires a screwdriver or socket wrench to install. Fits into the open side of the strut mounting rail.
Sales unit: 100 pieces
Lieske Part No.: 151946

One-piece cable/conduit clamp with protective shield. No screws or bolts to lose. Only requires a screwdriver or socket wrench to install. Fits into the open side of the strut mounting rail.
Sales unit: 50 pieces
Lieske Part No.: 559514

Fastening the junction box to the carrier.
Sales unit: 100 pieces
Lieske Part No.: 735532

Brackets for hanging and supporting signs. Sign support element for round mast, one M8 hole, with thread.
Sales unit: 50 pieces
Lieske Part No.: 545922

Straight post design, should be used when mounting on a false surface. Fastening for Fixoband. Stainless steel washers and screws included.
Sales unit: 50 pieces
Lieske Part No.: 916555

The specially flanged shape of the fastening element ensures a secure hold. Fastening for Fixoband. Rust-proof washers and screws included.
Sales unit: 50 pieces
Lieske Part No.: 195824

Straight post design, should be used when mounting on a false surface. Fastening for Fixoband. Stainless steel washers and screws included.
Sales unit: 50 pieces
Lieske Part No.: 1317012

Fastening for Fixoband.
Sales unit: 50 pieces
Lieske Part No.: 1317011

Two feet with pre-installed rail nuts and screw set for building an H-frame. This ensures better load distribution. Foam base for better protection of the roof membrane. For standard strut mounting rail profiles.
Lieske Part No.: 1261874

Single base with pre-installed rail nut to support custom framing on roofs. Provides excellent load distribution. Foam bottom for better protection of roof membrane. Accepts standard strut mounting rail profiles.
Lieske Part No.: 2068288

4-leg suspension kit, includes hardware and frame needed for a 48.5¿ (1200 mm) suspension system. Can be assembled by one person in minutes and adjusted to size and height. Integrated foam padding.
Lieske Part No.: 2068330

Ideal zur Verwendung mit Montageschienen des Typs 41x41 und Quadratrohren zur Anfertigung projektspezifischer Gerätehalterungen. Ausführung mit Langlöchern für eine schnelle und einfache Installation.
Sales unit: 20 pieces
Lieske Part No.: 514197

Installation with push-in clamps requires no additional tools or pipe clamps. Ready to use out of the box, saving installation time and labor. Plastic clamps and base are non-corrosive to pipes. Push-in clamps are available in 2 sizes to suit the project. The base has a variety of holes to accommodate different clamp sizes and configurations. Additional push-in clamps can be purchased separately to attach additional pipe runs. Foamed pad provides a low abrasion surface for better protection of the roof covering. Provides superior load distribution, even on uneven roof surfaces. Compatible with roof surfaces including single ply, bituminous materials, metal and spray foam. Available in multiple sizes and with different load capacities, the system can be customized to suit the application. Easy to transport to the roof.
Lieske Part No.: 1343704

Installation with push-in clamps requires no additional tools or pipe clamps. Ready to use out of the box, saving installation time and labor. Plastic clamps and base are non-corrosive to pipes. Push-in clamps are available in 2 sizes to suit the project. The base has a variety of holes to accommodate different clamp sizes and configurations. Additional push-in clamps can be purchased separately to attach additional pipe runs. Foamed pad provides a low abrasion surface for better protection of the roof covering. Provides superior load distribution, even on uneven roof surfaces. Compatible with roof surfaces including single ply, bituminous materials, metal and spray foam. Available in multiple sizes and with different load capacities, the system can be customized to suit the application. Easy to transport to the roof.
Sales unit: 10 pieces
Lieske Part No.: 1342344

Installation with push-in clamps requires no additional tools or pipe clamps. Ready to use out of the box, saving installation time and labor. Plastic clamps and base are non-corrosive to pipes. Push-in clamps are available in 2 sizes to suit the project. The base has a variety of holes to accommodate different clamp sizes and configurations. Additional push-in clamps can be purchased separately to attach additional pipe runs. Foamed pad provides a low abrasion surface for better protection of the roof covering. Provides superior load distribution, even on uneven roof surfaces. Compatible with roof surfaces including single ply, bituminous materials, metal and spray foam. Available in multiple sizes and with different load capacities, the system can be customized to suit the application. Easy to transport to the roof.
Sales unit: 5 pieces
Lieske Part No.: 1264418

Pedestal that uses a strut mounting rail to provide a fixed height mounting platform off the roof surface. Hot dip galvanized C-section strut mounting rail, 152mm long, 122mm high and hardware.
Sales unit: 20 pieces
Lieske Part No.: 1329280

Pedestal that provides a fixed height mounting platform on the roof surface with a strut mounting rail. Hot dip galvanized C-profile strut mounting rail, 254 mm long, 122 mm high.
Sales unit: 10 pieces
Lieske Part No.: 1329279

Pedestal that uses a strut mounting rail to provide a fixed height mounting platform away from the roof surface. Hot dip galvanized C-profile strut mounting rail, 254mm long, 163mm high.
Sales unit: 5 pieces
Lieske Part No.: 1329278

Provides superior load-bearing capacity for pipes, conduits, ducts, cable trays and equipment. Foamed overlay provides a low abrasion surface for better protection of roof covering. Compatible with roof surfaces including single ply, bituminous materials, metal and spray foam. Provides superior load distribution, even on uneven roof surfaces. Ready to use out of the box, saving installation time and labor. Available in multiple sizes and load capacities, the system can be customized to suit the application. Easy to transport to the roof. Hot-dip galvanized and UV stabilized for long life.
Sales unit: 5 pieces
Lieske Part No.: 1261730

Base with strut mounting rail profile that allows height changes away from the roof surface. Ready-to-use, immediately deployable solution with hot-dip galvanized strut mounting rail profile and hardware. 254 mm long, height adjustable 152-330 mm.
Sales unit: 5 pieces
Lieske Part No.: 1337337

Standfuß mit Strutmontageschienenprofil, die Höhenänderungen abseits der Dachfläche ermöglicht. Gebrauchsfertige, sofort einsatzber. Lösung mit feuerverz. Strutmontageschienenprofil u. Hardware. 406 mm lang, höhenverstellbar 178-457 mm.
Lieske Part No.: 514201