Installation Material from Erico

Versatile, height-adjustable suspension for quick installation on various building elements. Loop end piece on one side, keyless locking on the other side, 5 m length, 1.5 mm cable.
Sales unit: 20 pieces
Lieske Part No.: 1325639

The system includes the steel cable with tilting element and the lock. For fastening in simple through holes in a variety of components or devices. Ideal for lighting fixtures. Also available in Y configuration.
Sales unit: 20 pieces
Lieske Part No.: 873278

Versatile, height adjustable suspension for quick installation of various luminaires and low voltage equipment. Tilting element end piece on one side, keyless locking on the other side, 2m length, 1.5mm cable.
Sales unit: 20 pieces
Lieske Part No.: 873277

Versatile, height adjustable suspension for quick installation of various luminaires and low voltage equipment. Tilting element end piece on one side, keyless locking on the other side, 3m length, 1.5mm cable.
Lieske Part No.: 298443

Versatile, height adjustable suspension for quick installation of various luminaires and low voltage equipment. Tilting element end piece on one side, keyless locking on the other side, 5m length, 1.5mm cable.
Sales unit: 20 pieces
Lieske Part No.: 873274

The system includes the steel cable with tilting element and the lock. For fastening in simple through holes in a variety of components or devices. Ideal for lighting fixtures. Also available in Y configuration.
Sales unit: 20 pieces
Lieske Part No.: 1261579

Versatile, height adjustable suspension for quick installation on various metal structures. Ceiling hook end piece on one side, keyless locking on the other side, 3m length, 2mm cable.
Sales unit: 10 pieces
Lieske Part No.: 1325477

The system includes the steel cable, the fastener and the pre-assembled ceiling hook. Quick and easy attachment to trapezoidal ceilings. The spring tension allows the hook to snap securely into the hole and hold it there securely. The design reliably protects the cable from damage caused by sharp sheet metal edges.
Sales unit: 10 pieces
Lieske Part No.: 1325476

The system includes the steel cable, the lock and the pre-assembled nVent CADDY spring steel clamp. Is easily installed with a hammer. Fits most carriers.
Sales unit: 10 pieces
Lieske Part No.: 1261580

Versatile, height adjustable suspension for quick installation to various beams, joists and CADDY fittings. Hook end on one side, keyless locking on the other side, 1m length, 2mm cable.
Sales unit: 10 pieces
Lieske Part No.: 873297

Versatile, height adjustable suspension for quick installation to various beams, joists and CADDY fittings. Hook end on one side, keyless locking on the other side, 2m length, 2mm cable.
Lieske Part No.: 968797

Versatile, height adjustable suspension for quick installation to various beams, joists and CADDY fittings. Hook end on one side, keyless locking on the other side, 2m length, 3mm cable.
Lieske Part No.: 738031

Versatile, height adjustable suspension for quick installation to various beams, joists and CADDY fittings. Hook end on one side, keyless locking on the other side, 2m length, 5mm cable.
Lieske Part No.: 1325642

Versatile, height adjustable suspension for quick installation to various beams, joists and CADDY fittings. Hook end on one side, keyless locking on the other side, 10m length, 2mm cable.
Sales unit: 5 pieces
Lieske Part No.: 1325641

The system includes the steel cable with loop and the fastener. Simple and flexible fastening solution. The cable is looped around the support and simply pulled through the loop. Ideal for fastening to purlins, beams or other components. Fits into the smallest gaps. Loads can also be hooked directly into the loop, e.g. pipes.
Sales unit: 10 pieces
Lieske Part No.: 467904

The system includes the steel cable with loop and the fastener. Simple and flexible fastening solution. The cable is looped around the support and simply pulled through the loop. Ideal for fastening to purlins, beams or other components. Fits into the smallest gaps. Loads can also be hooked directly into the loop, e.g. pipes.
Sales unit: 10 pieces
Lieske Part No.: 467906

Versatile, height adjustable suspension for quick installation of various lights and cable trays. Y-hook end piece 500mm on one side, keyless locking on the other, 2m length, 2mm cable.
Sales unit: 10 pieces
Lieske Part No.: 466381

The system includes the steel cable with 2 hooks and the fastener. For fastening to building elements and for hooking into cable trays or suitable supporting elements. The spring clip holds the cable securely in the hook. The design allows a hook to be temporarily released in order to carry out maintenance work or to remove or add cables to a cable tray. The single cable with the double hook increases the stability of the system. Also available with a single hook.
Sales unit: 10 pieces
Lieske Part No.: 1325636

The system includes the steel cable with 2 hooks and the fastener. For fastening to building elements and for hooking into cable trays or suitable supporting elements. The spring clip holds the cable securely in the hook. The design allows a hook to be temporarily released in order to carry out maintenance work or to remove or add cables to a cable tray. The single cable with the double hook increases the stability of the system. Also available with a single hook.
Sales unit: 10 pieces
Lieske Part No.: 1325459

The system includes the steel cable with 2 tilting elements and the lock. For fastening in simple through holes in a variety of components or devices. Ideal for lighting fixtures.
Sales unit: 10 pieces
Lieske Part No.: 2068327

The system includes the steel cable, the lock and the pre-assembled threaded screw. For fastening to components with threaded anchors or other machine threads. For direct connection to mounting trapezes, lighting fixtures, signs or SHKL elements.
Sales unit: 10 pieces
Lieske Part No.: 467913

The system includes the steel cable, the lock and the pre-assembled threaded screw. For fastening to components with threaded anchors or other machine threads. For direct connection to mounting trapezes, lighting fixtures, signs or SHKL elements.
Sales unit: 10 pieces
Lieske Part No.: 467915

The system includes the steel cable, the lock and the pre-assembled threaded screw. For fastening to components with threaded anchors or other machine threads. For direct connection to mounting trapezes, lighting fixtures, signs or SHKL elements.
Sales unit: 20 pieces
Lieske Part No.: 1325638

The system includes the steel cable, the lock and the pre-assembled threaded screw. For fastening to components with threaded anchors or other machine threads. For direct connection to mounting trapezes, lighting fixtures, signs or SHKL elements.
Sales unit: 20 pieces
Lieske Part No.: 1325622

Easy to use keyless lock for wire rope suspension systems. Tool free, compatible with 1.5 and 2 mm steel cable.
Sales unit: 200 pieces
Lieske Part No.: 1337332

The system includes the steel cable with loop and the fastener. Simple and flexible fastening solution. The cable is looped around the support and simply pulled through the loop. Ideal for fastening to purlins, beams or other components. Fits into the smallest gaps. Loads can also be hooked directly into the loop, e.g. pipes.
Sales unit: 20 pieces
Lieske Part No.: 1337333

Das System beinhaltet das Stahlseil mit Schlaufe und den Verschluss. Einfache und flexible Befestigungslösung. Das Seil wird um den Träger geschlungen und einfach durch die Schlaufe gezogen. Ideal zur Befestigung an Pfetten, Trägern oder anderen Bauteilen. Passt in kleinste Zwischenräume. Lasten können auch direkt in die Schlaufe eingehängt werden z.B. Rohre. Verkaufseinheit: 20 ST.
Sales unit: 20 pieces
Lieske Part No.: 514203

The system includes the steel cable with loop and the fastener. Simple and flexible fastening solution. The cable is looped around the support and simply pulled through the loop. Ideal for fastening to purlins, beams or other components. Fits into the smallest gaps. Loads can also be hooked directly into the loop, e.g. pipes.
Sales unit: 10 pieces
Lieske Part No.: 349774

The system includes the steel cable with hook and the fastener. Can be combined with many nVent CADDY fasteners. To attach to the building or an object, the cable is simply looped around and the hook is attached to the cable. Can be easily removed again. The spring tab holds the cable securely in the hook. The hook can also be used as an end stop when the cable is fed through openings. Also available in Y-hook configuration.
Sales unit: 15 pieces
Lieske Part No.: 1343701

Das System beinhaltet das Stahlseil mit Haken und den Verschluss. Kann mit vielen nVent CADDY Befestigungselementen kombiniert werden. Zum Befestigen am Gebäude oder eines Gegenstandes wird das Seil einfach herumgeschlungen und der Haken am Seil eingehängt. Kann einfach wieder entfernt werden. Die Federlasche hält das Seil sicher im Haken. Der Haken kann auch als Endanschlag benutzt werden, wenn das Seil durch Öffnungen geführt wird. Auch in Y-Haken Konfiguration verfügbar. Verkaufseinheit: 30 ST.
Sales unit: 30 pieces
Lieske Part No.: 2144586

The system includes the steel cable, fastener and bolt anchor from Powers Fasteners, Inc. Fastens quickly and easily in cracked and uncracked concrete. No special tools required.
Lieske Part No.: 2068519

The system includes the steel cable, fastener and bolt anchor from Powers Fasteners, Inc. Fastens quickly and easily in cracked and uncracked concrete. No special tools required.
Lieske Part No.: 2068520

The system includes the steel cable, the fastener and the pre-assembled ceiling hook. Quick and easy attachment to trapezoidal ceilings. The spring tension allows the hook to snap securely into the hole and hold it there securely. The design reliably protects the cable from damage caused by sharp sheet metal edges.
Sales unit: 20 pieces
Lieske Part No.: 2068521

The system includes the steel cable, the fastener and the pre-assembled ceiling hook. Quick and easy attachment to trapezoidal ceilings. The spring tension allows the hook to snap securely into the hole and hold it there securely. The design reliably protects the cable from damage caused by sharp sheet metal edges.
Lieske Part No.: 2068522

The system includes the steel cable with hook and the fastener. Can be combined with many nVent CADDY fasteners. To attach to the building or an object, the cable is simply looped around and the hook is attached to the cable. Can be easily removed again. The spring tab holds the cable securely in the hook. The hook can also be used as an end stop when the cable is fed through openings. Also available in Y-hook configuration.
Sales unit: 10 pieces
Lieske Part No.: 591660

The system includes the steel cable with hook and the fastener. Can be combined with many nVent CADDY fasteners. To attach to the building or an object, the cable is simply looped around and the hook is attached to the cable. Can be easily removed again. The spring tab holds the cable securely in the hook. The hook can also be used as an end stop when the cable is fed through openings. Also available in Y-hook configuration.
Sales unit: 10 pieces
Lieske Part No.: 1334623

The system includes the steel cable with hook and the fastener. Can be combined with many nVent CADDY fasteners. To attach to the building or an object, the cable is simply looped around and the hook is attached to the cable. Can be easily removed again. The spring tab holds the cable securely in the hook. The hook can also be used as an end stop when the cable is fed through openings. Also available in Y-hook configuration.
Sales unit: 10 pieces
Lieske Part No.: 604594

The system includes the steel cable with hook and the fastener. Can be combined with many nVent CADDY fasteners. To attach to the building or an object, the cable is simply looped around and the hook is attached to the cable. Can be easily removed again. The spring tab holds the cable securely in the hook. The hook can also be used as an end stop when the cable is fed through openings. Also available in Y-hook configuration.
Sales unit: 5 pieces
Lieske Part No.: 591916

Das System beinhaltet das Stahlseil mit Schlaufe und den Verschluss. Einfache und flexible Befestigungslösung. Das Seil wird um den Träger geschlungen und einfach durch die Schlaufe gezogen. Ideal zur Befestigung an Pfetten, Trägern oder anderen Bauteilen. Passt in kleinste Zwischenräume. Lasten können auch direkt in die Schlaufe eingehängt werden z.B. Rohre. Verkaufseinheit: 10 ST.
Sales unit: 10 pieces
Lieske Part No.: 1356756

The system includes the steel cable, the lock and the pre-assembled angle connector. Ideal for fastening to concrete, steel, threaded rods or wooden surfaces. Simple alternative to chains and their accessories.
Sales unit: 10 pieces
Lieske Part No.: 1343692

The system includes the steel cable, the lock and the pre-assembled angle connector. Ideal for fastening to concrete, steel, threaded rods or wooden surfaces. Simple alternative to chains and their accessories.
Sales unit: 5 pieces
Lieske Part No.: 1343699

Easy to use keyless lock for wire rope suspension systems. Tool free, compatible with 3mm steel cable.
Sales unit: 200 pieces
Lieske Part No.: 1334634

The system includes the steel cable, fastener and bolt anchor from Powers Fasteners, Inc. Fastens quickly and easily in cracked and uncracked concrete. No special tools required.
Sales unit: 10 pieces
Lieske Part No.: 1343683

The system includes the steel cable, fastener and bolt anchor from Powers Fasteners, Inc. Fastens quickly and easily in cracked and uncracked concrete. No special tools required.
Sales unit: 10 pieces
Lieske Part No.: 2068372

The single cable entry closure allows for quick prefabrication of mounting rails. The slip-on nut connects the closure simply and securely to the mounting rail or fastener and simplifies installation. When hand-tightened, the closure is held securely in position without the need for tools. Can be installed in strut mounting rail profiles without having to insert fingers or tools into the strut mounting rail. The guide on the slip-on nut guides the cable safely into the closure mechanism and stabilizes the suspension. The mounting rail can be installed with the opening facing up or down.
Sales unit: 50 pieces
Lieske Part No.: 2068374

The single cable entry closure allows for quick prefabrication of mounting rails. The slip-on nut connects the closure simply and securely to the mounting rail or fastener and simplifies installation. When hand-tightened, the closure is held securely in position without the need for tools. Can be installed in strut mounting rail profiles without having to insert fingers or tools into the strut mounting rail. The guide on the slip-on nut guides the cable safely into the closure mechanism and stabilizes the suspension. The mounting rail can be installed with the opening facing up or down.
Lieske Part No.: 2068375

The system includes the steel cable with hook and the lock. Can be combined with many nVent CADDY fasteners. To attach to the building or an object, the cable is simply looped around and the hook is attached to the cable. Can be easily removed again. The spring tab holds the cable securely in the hook. The hook can also be used as an end stop when the cable is fed through openings. When hand-tightened, the lock is held securely in position, without the need for tools. Can be installed in strut mounting rail profiles without having to insert fingers or tools into the strut mounting rail.
Lieske Part No.: 2068376

The system includes the steel cable with hook and the lock. Can be combined with many nVent CADDY fasteners. To attach to the building or an object, the cable is simply looped around and the hook is attached to the cable. Can be easily removed again. The spring tab holds the cable securely in the hook. The hook can also be used as an end stop when the cable is fed through openings. When hand-tightened, the lock is held securely in position, without the need for tools. Can be installed in strut mounting rail profiles without having to insert fingers or tools into the strut mounting rail.
Lieske Part No.: 2068377

The system includes the steel cable with hook and the lock. Can be combined with many nVent CADDY fasteners. To attach to the building or an object, the cable is simply looped around and the hook is attached to the cable. Can be easily removed again. The spring tab holds the cable securely in the hook. The hook can also be used as an end stop when the cable is fed through openings. When hand-tightened, the lock is held securely in position, without the need for tools. Can be installed in strut mounting rail profiles without having to insert fingers or tools into the strut mounting rail.
Lieske Part No.: 2068379

The system includes the steel cable with hook and the lock. Can be combined with many nVent CADDY fasteners. To attach to the building or an object, the cable is simply looped around and the hook is attached to the cable. Can be easily removed again. The spring tab holds the cable securely in the hook. The hook can also be used as an end stop when the cable is fed through openings. When hand-tightened, the lock is held securely in position, without the need for tools. Can be installed in strut mounting rail profiles without having to insert fingers or tools into the strut mounting rail.
Lieske Part No.: 2068380