Installation Material from Erico

Pipe diameter 35-42 mm flange thickness: 3-8 mm Type: 2 M24SM item:
ST.
Sales unit: 100 pieces
Lieske Part No.: 506738

For suspending installations from grid ceiling profiles. No tools required for installation. Fast, easy and safe twist installation. To reduce scratches on grid ceiling profiles. Nut sold separately.
Sales unit: 100 pieces
Lieske Part No.: 866156

Chest tube clamp
lockable, EPZ
Flange thickness: 3-8 mm

Type: 16EM24
Package: 10 PCS.
Sales unit: 50 pieces
Lieske Part No.: 283877

For securing conduits/pipes or cables from support flanges. The clamp can be rotated a full 360°. Only requires a hammer for installation.
Sales unit: 100 pieces
Lieske Part No.: 1427780

Chest tube clamp closed, EPZ flange thickness: 3-8 mm Type: 2 EM24 item:
ST.
Sales unit: 50 pieces
Lieske Part No.: 808096

Quick and easy to install clip for a threaded pin fixing point in acoustic T-grid applications. For 24 mm T-grid with M6 x 11 mm threaded pin, white.
Sales unit: 100 pieces
Lieske Part No.: 768152

CADDY EM-SM clip
with grub screw M 6 x 11
ERICO zinc coating
Also available in stainless steel
Flange thickness: 14-20 mm
Max load 45 kg

Type: EM912SM
Quantity: 1 unit.
Lieske Part No.: 331955

Fastening element for hammering in, for threaded pin fastening of device boxes, devices and other applications to support flanges. Spring steel fastening, is attached to flanges from 21 to 28 mm, with M6 x 11 mm threaded pin.
Sales unit: 50 pieces
Lieske Part No.: 2068469

For suspending installations from grid ceiling profiles. No tools required for installation. Fast, easy and safe twist installation. To reduce scratches on grid ceiling profiles. Nut sold separately.
Sales unit: 100 pieces
Lieske Part No.: 536098

CADDY 4G
6M clip ERICO zinc coating, painted white. Flange width 24-26 mm flange thickness
, 5 mm screw M 6 x
6 mm Type: 4G
6M
6 item:
ST.
Sales unit: 100 pieces
Lieske Part No.: 781553

Chest tube clamp
lockable, EPZ
Flange thickness: 8-14 mm

Type: 20EM58
Package: 10 PCS.
Lieske Part No.: 281803

Chest tube clamp
closed, EPZ
Flange thickness: 3-8 mm

Type: 24EM24
Package: 10 PCS.
Sales unit: 50 pieces
Lieske Part No.: 658532

Chest tube clamp closed, EPZ flange thickness: 8 -
4 mm Type: 24EM58 item: 5 ea.
Sales unit: 50 pieces
Lieske Part No.: 807221

Zur Befestigung von Kabelschutzrohren/Rohren oder Kabeln von Trägerflanschen. Die Schelle kann um vollständige 360° gedreht werden. Erfordert nur einen Hammer zur Installation.
Sales unit: 100 pieces
Lieske Part No.: 997778

CADDY EM-SM clamp
with screw M6 x 11
ERICO zinc coating
Also available in stainless steel
Flange thickness: 8-14 mm
Maximum load: 45 kg Type: EM58SM


Quantity: 1 unit.
Lieske Part No.: 243223

Requires only a hammer for installation. Available for EMT, rigid, IMT and aluminum conduit. Rotates 360°.
Sales unit: 100 pieces
Lieske Part No.: 541967

Spring steel fastener with push-in system that supports the conduit below or above the flange. 1/2¿ EMT or 18 to 22 mm conduit to 5/16¿-1/2¿ or 8 to 14 mm flange, mounting on the lower flange.
Sales unit: 100 pieces
Lieske Part No.: 675291

Can be used to attach junction boxes, fasteners or other applications to beam flanges. Multiple attachment points available to reduce inventory. Only requires a hammer for installation.
Sales unit: 25 pieces
Lieske Part No.: 247236

Can be used to attach junction boxes, fasteners or other applications to beam flanges. Multiple attachment points available to reduce inventory. Only requires a hammer for installation.
Sales unit: 250 pieces
Lieske Part No.: 318148

Can be used to attach junction boxes, fasteners or other applications to beam flanges. Captive set screw minimizes the need for additional components. Multiple attachment points available to reduce inventory. Only requires a hammer for installation.
Sales unit: 100 pieces
Lieske Part No.: 103302

Can be used to attach junction boxes, fasteners or other applications to beam flanges. Captive set screw minimizes the need for additional components. Multiple attachment points available to reduce inventory. Only requires a hammer for installation.
Lieske Part No.: 359384

For attaching nVent CADDY Speed Link assemblies, wire, S-hook or chain from ceiling grid profiles. Fast, easy and secure twist-on installation. To reduce scratches on ceiling grid profiles. No tools required for installation.
Sales unit: 25 pieces
Lieske Part No.: 845099

For suspending installations from grid ceiling profiles. No tools required for installation. Fast, easy and safe twist installation. To reduce scratches on grid ceiling profiles. Nut sold separately.
Sales unit: 250 pieces
Lieske Part No.: 306864

Hammer-on fastener for attaching various chain or wire applications to steel support members. Attaches to 3-8mm flanges, with 7.1mm hole for attachment point. Small pack.
Lieske Part No.: 397621

Drop-in fastener for attaching various chain or wire applications to steel support members. Attaches to 8-14mm flanges, with 7.1mm hole for attachment point. Small pack.
Lieske Part No.: 989246

Attaches cables to the top of the flange. Only requires a hammer to install.
Sales unit: 250 pieces
Lieske Part No.: 1316767

Provides attachment for wire, nVent CADDY Speed Link or other assemblies to flanges and extrusions. Fits most beams. Installs easily with a hammer.
Sales unit: 250 pieces
Lieske Part No.: 493845

For hanging chains, perforated tape or the like.
Sales unit: 250 pieces
Lieske Part No.: 1311234

Easy installation on beam flanges. A 10.5 mm diameter through hole allows the use of M6, M8 or M10 threaded rod and carries static loads up to 450 N. Features three M6 threaded holes for attaching junction boxes to the side or underneath steel beams.
Sales unit: 250 pieces
Lieske Part No.: 703775

Beam clamp for installation on steel beams. Pipes can be easily inserted and locked into place without tools using the snap lock. 23.4-35mm OD, 16mm max. flange.
Sales unit: 100 pieces
Lieske Part No.: 928928

Easy installation on support flanges. Eliminates the need for compensating bends in the cable duct. Cable duct clamp rotates 360°.
Sales unit: 50 pieces
Lieske Part No.: 777523

Easy installation on support flanges. Eliminates the need for compensating bends in the cable duct. Cable duct clamp rotates 360°.
Sales unit: 50 pieces
Lieske Part No.: 1427572

Easy installation on support flanges. Eliminates the need for compensating bends in the cable duct. Cable duct clamp rotates 360°.
Sales unit: 50 pieces
Lieske Part No.: 2068141

Easy installation on support flanges. Eliminates the need for compensating bends in the cable duct. Cable duct clamp rotates 360°.
Sales unit: 100 pieces
Lieske Part No.: 291984

Beam clamp for installation on steel beams. Pipes can be easily inserted and locked into place without tools using the snap lock. 23.4-35mm OD, 16mm Max. FL.
Sales unit: 100 pieces
Lieske Part No.: 702030

Easy installation on support flanges. Eliminates the need for compensating bends in the cable duct. Cable duct clamp rotates 360°.
Sales unit: 50 pieces
Lieske Part No.: 1427566

Easy installation on support flanges. Eliminates the need for compensating bends in the cable duct. Cable duct clamp rotates 360°.
Sales unit: 50 pieces
Lieske Part No.: 1427567

Easy installation on support flanges. Eliminates the need for compensating bends in the cable duct. Cable duct clamp rotates 360°.
Sales unit: 50 pieces
Lieske Part No.: 1427568

Combine open eyebolts with other nVent CADDY fasteners to support cables through flanges, purlins, louvres, T-grids, etc.
Sales unit: 100 pieces
Lieske Part No.: 985540

Combine open eyebolts with other nVent CADDY fasteners to support cables through flanges, purlins, louvres, T-grids, etc.
Sales unit: 100 pieces
Lieske Part No.: 671613

For attaching cable trays up to 100 mm wide to threaded rods.
Sales unit: 50 pieces
Lieske Part No.: 1427570

Threaded rod support. Threaded insert for easy installation.
Sales unit: 100 pieces
Lieske Part No.: 1262621

Trapezoidal ceiling suspension clip with threaded insert. M10 thread.
Sales unit: 100 pieces
Lieske Part No.: 1317455

CADDY H-ST-clamp ERICO zinc coating flange thickness: 2-3 mm Max load: 75 kg Type: 2H4ST3 item:
ST.
Sales unit: 100 pieces
Lieske Part No.: 523312

Chest tube clamp
lockable, EPZ
Flange thickness: 14-20 mm

Type: 16EM912
Item: 50 ST.
Sales unit: 50 pieces
Lieske Part No.: 437946

Chest tube clamp closed, EPZ Flange:
4-2 mm Type: 2 EM9
2 Quantity: 5 PCS.
Sales unit: 50 pieces
Lieske Part No.: 541285

For securing conduits/pipes or cables from support flanges. The clamp can be rotated a full 360°. Only requires a hammer for installation.
Sales unit: 50 pieces
Lieske Part No.: 883894

For securing conduits/pipes or cables from support flanges. The clamp can be rotated a full 360°. Only requires a hammer for installation.
Sales unit: 50 pieces
Lieske Part No.: 818868

For securing conduits/pipes or cables from support flanges. The clamp can be rotated a full 360°. Only requires a hammer for installation.
Sales unit: 50 pieces
Lieske Part No.: 112276

For securing conduits/pipes or cables from support flanges. The clamp can be rotated a full 360°. Only requires a hammer for installation.
Sales unit: 50 pieces
Lieske Part No.: 539228