clipfix-UV white is a plastic clamp made of modified polypropylene, in white (RAL 9010), non-flame-propagating. This plastic clamp is used for the white plastic straight pipe FPKu-EM-F-UV and for all corrugated pipes. The clamps can be attached and lined up on a C-profile rail (10mm). When fastening under extreme conditions such as vibration, high temperatures, overhead, heavy weights, etc., the specified clamp spacing must be greatly reduced or replaced with metal U-clamps (ASG-E). UV-stable for up to 10 years.
Sales unit: 50 pieces
Lieske Part No.: 705130

clipfix-UV white is a plastic clamp made of modified polypropylene, in white (RAL 9010), non-flame-propagating. This plastic clamp is used for the white plastic straight pipe FPKu-EM-F-UV and for all corrugated pipes. The clamps can be attached and lined up on a C-profile rail (10mm). When fastening under extreme conditions such as vibration, high temperatures, overhead, heavy weights, etc., the specified clamp spacing must be greatly reduced or replaced with metal U-clamps (ASG-E). UV-stable for up to 10 years.
Sales unit: 50 pieces
Lieske Part No.: 769812

clipfix-UV grey is a plastic clamp made of modified polypropylene, in grey (RAL 7035), non-flame-propagating. This plastic clamp is used for the grey plastic straight pipe FPKu-ES-F-UV and for all corrugated pipes. Clipfix safety brackets are included with the nominal widths 40 and 50. The clamps can be attached and lined up on a C-profile rail (10mm). When fastening under extreme conditions such as vibration, high temperatures, overhead, heavy weights, etc., the specified clamp spacing must be greatly reduced or replaced with metal bracket clamps (ASG-E). UV-stable for up to 10 years.
Sales unit: 50 pieces
Lieske Part No.: 161050

clipfix-UV grey is a plastic clamp made of modified polypropylene, in grey (RAL 7035), non-flame-propagating. This plastic clamp is used for the grey plastic straight pipe FPKu-ES-F-UV and for all corrugated pipes. Clipfix safety brackets are included with the nominal widths 40 and 50. The clamps can be attached and lined up on a C-profile rail (10mm). When fastening under extreme conditions such as vibration, high temperatures, overhead, heavy weights, etc., the specified clamp spacing must be greatly reduced or replaced with metal bracket clamps (ASG-E). UV-stable for up to 10 years.
Sales unit: 50 pieces
Lieske Part No.: 776186

The clipfix-UV 32 grey is a high-quality plastic clamp made of modified polypropylene, manufactured in grey (RAL 7035) and non-flame spread. It is designed for the secure fastening of the grey plastic conduit FPKu-ES-F-UV as well as all corrugated pipes, and features high UV stability up to 10 years. The clamp can be mounted both in-line and stacked on a C-profile rail with a width of 10 mm, enabling flexible and quick installation in various scenarios. In case of extreme conditions such as vibration, high temperatures, overhead mounting, or heavy loads, reducing the spacing between clamps or using metal hanger clamps (ASG-E) is recommended to ensure stability and safety. The clamp is particularly suitable for use in electrical and building services, where reliable and durable fastening of cables and pipes is required.
Sales unit: 50 pieces
Lieske Part No.: 878074

clipfix-UV grey is a plastic clamp made of modified polypropylene, in grey (RAL 7035), non-flame-propagating. This plastic clamp is used for the grey plastic straight pipe FPKu-ES-F-UV and for all corrugated pipes. Clipfix safety brackets are included with the nominal widths 40 and 50. The clamps can be attached and lined up on a C-profile rail (10mm). When fastening under extreme conditions such as vibration, high temperatures, overhead, heavy weights, etc., the specified clamp spacing must be greatly reduced or replaced with metal bracket clamps (ASG-E). UV-stable for up to 10 years.
Sales unit: 25 pieces
Lieske Part No.: 115860

clipfix-UV grey is a plastic clamp made of modified polypropylene, in grey (RAL 7035), non-flame-propagating. This plastic clamp is used for the grey plastic straight pipe FPKu-ES-F-UV and for all corrugated pipes. Clipfix safety brackets are included with the nominal widths 40 and 50. The clamps can be attached and lined up on a C-profile rail (10mm). When fastening under extreme conditions such as vibration, high temperatures, overhead, heavy weights, etc., the specified clamp spacing must be greatly reduced or replaced with metal bracket clamps (ASG-E). UV-stable for up to 10 years.
Sales unit: 25 pieces
Lieske Part No.: 886568

FIPLOCK® Befestigungsclip COPA-S aus speziell modifiziertem Polyamid 6, halogenfrei. Der wiederverschließbare Deckel ist direkt am Clip angebracht. Passend für C-Montageschienen.
Sales unit: 10 pieces
Lieske Part No.: 702361

FIPLOCK® Befestigungsclip COPA-S aus speziell modifiziertem Polyamid 6, halogenfrei. Der wiederverschließbare Deckel ist direkt am Clip angebracht. Passend für C-Montageschienen.
Sales unit: 10 pieces
Lieske Part No.: 702363

FIPLOCK® Befestigungsclip mit Sockel COPA-H mit Sockel aus speziell modifiziertem Polyamid 6, halogenfrei. Durch seine verstärkte Bodenplatte bietet er einen hervorragenden und verdreh sicheren Halt. Der wiederverschließbare Deckel ist direkt am Clip angebracht.
Sales unit: 10 pieces
Lieske Part No.: 834565

FIPLOCK® Befestigungsclip COPA-S aus speziell modifiziertem Polyamid 6, halogenfrei. Der wiederverschließbare Deckel ist direkt am Clip angebracht. Passend für C-Montageschienen.
Sales unit: 6 pieces
Lieske Part No.: 2144891

FIPLOCK® Befestigungsclip COPA-S aus speziell modifiziertem Polyamid 6, halogenfrei. Der wiederverschließbare Deckel ist direkt am Clip angebracht. Passend für C-Montageschienen.
Sales unit: 6 pieces
Lieske Part No.: 702366

FIPLOCK® Befestigungsclip mit Sockel COPA-H mit Sockel aus speziell modifiziertem Polyamid 6, halogenfrei. Durch seine verstärkte Bodenplatte bietet er einen hervorragenden und verdreh sicheren Halt. Der wiederverschließbare Deckel ist direkt am Clip angebracht.
Sales unit: 4 pieces
Lieske Part No.: 834566

FIPLOCK® Rohrschelle mit Lasche und Fixierungsrippe CPPA aus speziell modifiziertem Polyamid 6, halogenfrei.
Sales unit: 10 pieces
Lieske Part No.: 834568

FIPLOCK® pipe clamp with double tab and fixing rib CUPA made of specially modified polyamide 6, halogen-free.
Sales unit: 6 pieces
Lieske Part No.: 673505

FIPLOCK® Rohrschelle mit Lasche CPSZ aus galvanisch verzinktem Stahl mit EPDM Schutz.
Sales unit: 50 pieces
Lieske Part No.: 834570

Fixing clamp for Co-flex PP and PA6, fixed in the axial direction, non-flame, PA6, halogen free, self extinguishing Resistant to: fuels, mineral oils, fats, alkalis, common solvents, type: COS DN

ST.
Sales unit: 100 pieces
Lieske Part No.: 524578

Fixing clamp for Co-flex PP and PA6, fixed in the axial direction, non-flame, PA6, halogen free, self extinguishing Resistant to: fuels, mineral oils, fats, alkalis, common solvents, type: COS DN 14



Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 635655

Fixing clamp for Co-flex PP and PA6, fixed in the axial direction, non-flame, PA6, halogen free, self extinguishing Resistant to: fuels, mineral oils, fats, alkalis, common solvents,


Type: COS DN20
Quantity: 1 unit.
Sales unit: 50 pieces
Lieske Part No.: 344844

COS is a fastening clamp with an integrated rib made of polyamide 66. This is halogen-free, non-flame-propagating and available in black. The fastening clamp is used to fix the Co-flex corrugated pipes. It is provided with a web that prevents the pipe from slipping in the clamp. Special eyelets allow the pipe to be fixed using cable ties. Temperature resistance according to LV312-3: -30° C to +105° C. Flammability: UL 94 V2 / FMVSS 302.
Sales unit: 50 pieces
Lieske Part No.: 177081

Fixing clamp for Co-flex PP and PA6, fixed in the axial direction, non-flame, PA6, halogen free, self extinguishing Resistant to: fuels, mineral oils, fats, alkalis, common solvents, Type: CO-DN37 item:
ST.
Sales unit: 20 pieces
Lieske Part No.: 527519

FIPSPLIT® Kunststoff-Befestigungsclip 2CNPA aus speziell formuliertem Polyamid 6, halogenfrei, zur Befestigung von teilbaren Wellrohren. Seitlich angebrachte Schlitze in den Klammern ermöglichen bei Bedarf eine zusätzliche Sicherung der Wellrohre mit Kabelbinder.
Sales unit: 10 pieces
Lieske Part No.: 834573

FIPSPLIT® Kunststoff-Befestigungsclip 2CNPA aus speziell formuliertem Polyamid 6, halogenfrei, zur Befestigung von teilbaren Wellrohren. Seitlich angebrachte Schlitze in den Klammern ermöglichen bei Bedarf eine zusätzliche Sicherung der Wellrohre mit Kabelbinder.
Sales unit: 10 pieces
Lieske Part No.: 834574

For mounting recessed spotlights in drywall and acoustic construction. Suitable for panels and plasterboard. Offers thermal and mechanical advantages. Can be retrofitted in old and new buildings. For recesses of 62 to 90 mm in diameter. Maximum height of recessed lights limited to 70 mm. Safe distance between recessed light, vapor barrier film and insulation material. Reduces the risk of overheating and heat build-up. Can have a positive effect on the service life of the lamp. Tested in accordance with EN 60598-1 and EN 60598-2-2. SpotClip-I is a new product development for mounting lights in drywall and acoustic construction. The innovative four-legged spacer for recessed spotlights has numerous advantages and is suitable for use in both panels and plasterboard (GKP). SpotClip-I is made of non-flammable, glass fiber reinforced polyamide. This offers a range of thermal and mechanical advantages and can also be retrofitted. This opens up a wide range of possible applications in both old and new buildings.
Lieske Part No.: 637360

Flaches Design für Anwendungen mit engen Platzverhältnissen. Selbstklebende Sockel zur schnellen und einfachen Montage. Wird ohne zusätzlichen Kabelbinder verwendet. Bietet Potential zur Prozessoptimierung. Verschiedene Größen für verschiedene Bündeldurchmesser erhältlich. Kostengünstige Lösung und einfache Installation. Geeignet für Anwendungen auf glatten, sauberen Oberflächen. Die selbstklebenden Sockel der RB-Serie bieten eine größere Führungsfreiheit und reduzieren das Korrosionsrisiko im Vergleich zu Schraubbefestigungen. Sie eignen sich hervorragend für die werkzeuglose Installation und können wieder geöffnet und erneut verwendet werden. Dies ist vor allem dann hilfreich, wenn Bündel schnell und einfach ausgetauscht werden müssen. Die RB-Serie kann ohne Kabelbinder verwendet werden und bietet Prozessoptimierungspotential für eine Vielzahl von Anwendungen.
Sales unit: 100 pieces
Lieske Part No.: 176049

Low profile design for applications where space is limited. Self-adhesive bases for quick and easy installation. Used without additional cable ties. Offers potential for process optimization. Various sizes available for different bundle diameters. Cost-effective solution and easy installation. Suitable for applications on smooth, clean surfaces. The RB series self-adhesive bases offer greater routing freedom and reduce the risk of corrosion compared to screw fastenings. They are ideal for tool-free installation and can be reopened and reused. This is especially useful when bundles need to be replaced quickly and easily. The RB series can be used without cable ties and offers process optimization potential for a wide range of applications.
Sales unit: 1400 pieces
Lieske Part No.: 1129381

Fastening element with rounded expansion anchor. For minimized installation height behind the hole, space-saving. Defined bundle diameter. For subsequent assembly of bundled goods. These holders can be ideally used wherever space-saving work is required. In the event of maintenance, the pipes and cable harnesses can be replaced.
Sales unit: 2500 pieces
Lieske Part No.: 2058148

für ein oder zwei Solarleitungen. sicherer Halt der Leitungen. einfaches tauschen der Leitungen im Wartungsfall. für Kanten 1,0 - 3,0 mm. Unser EC1-3SPDHC6-6 ist perfekt für die Verlegung von Solarleitungen. Der Artikel kann durch einfaches aufstecken per Hand auf Solarmodule appliziert werden. Danach können bis zu zwei Leitungen durch einfaches eindrücken in den Halter sicher geführt werden.
Sales unit: 1000 pieces
Lieske Part No.: 1567624

Low profile design for applications where space is limited. Self-adhesive bases for quick and easy installation. Used without additional cable ties. Offers potential for process optimization. Various sizes available for different bundle diameters. Cost-effective solution and easy installation. Suitable for applications on smooth, clean surfaces. The RB series self-adhesive bases offer greater routing freedom and reduce the risk of corrosion compared to screw fastenings. They are ideal for tool-free installation and can be reopened and reused. This is especially useful when bundles need to be replaced quickly and easily. The RB series can be used without cable ties and offers process optimization potential for a wide range of applications.
Sales unit: 1000 pieces
Lieske Part No.: 982589

Flaches Design für Anwendungen mit engen Platzverhältnissen. Selbstklebende Sockel zur schnellen und einfachen Montage. Wird ohne zusätzlichen Kabelbinder verwendet. Bietet Potential zur Prozessoptimierung. Verschiedene Größen für verschiedene Bündeldurchmesser erhältlich. Kostengünstige Lösung und einfache Installation. Geeignet für Anwendungen auf glatten, sauberen Oberflächen. Die selbstklebenden Sockel der RB-Serie bieten eine größere Führungsfreiheit und reduzieren das Korrosionsrisiko im Vergleich zu Schraubbefestigungen. Sie eignen sich hervorragend für die werkzeuglose Installation und können wieder geöffnet und erneut verwendet werden. Dies ist vor allem dann hilfreich, wenn Bündel schnell und einfach ausgetauscht werden müssen. Die RB-Serie kann ohne Kabelbinder verwendet werden und bietet Prozessoptimierungspotential für eine Vielzahl von Anwendungen.
Sales unit: 100 pieces
Lieske Part No.: 176044

Low profile design for applications where space is limited. Self-adhesive bases for quick and easy installation. Used without additional cable ties. Offers potential for process optimization. Various sizes available for different bundle diameters. Cost-effective solution and easy installation. Suitable for applications on smooth, clean surfaces. The RB series self-adhesive bases offer greater routing freedom and reduce the risk of corrosion compared to screw fastenings. They are ideal for tool-free installation and can be reopened and reused. This is especially useful when bundles need to be replaced quickly and easily. The RB series can be used without cable ties and offers process optimization potential for a wide range of applications.
Sales unit: 50 pieces
Lieske Part No.: 1135033

Easy attachment of ribbon cables. Made of PVC (polyvinyl chloride).
Sales unit: 5000 pieces
Lieske Part No.: 2050603

Fastening clips can be freely rotated by 360°. Simply clip onto hose, pipe or cable. For parallel guidance of two bundles at a defined distance. Also suitable for subsequent installation. This particularly easy-to-install series connects two bundled goods of different sizes and types. The mobility of the fastening element offers a secure hold even under difficult conditions, such as vibrations, and protects the cables or bundles.
Sales unit: 4000 pieces
Lieske Part No.: 2058150

The bases and clips for Helawrap are flexible and efficient. They enclose the protective tube for a firm hold. Each clip can be attached to each other or to a mounting plate. Each clip is freely movable. Easy to attach and reusable. Various Helawrap clips in the right sizes are used to complete the Helawrap cable management system. The clips and mounting bases can be coupled together as desired and mounted either with screws or conveniently with an adhesive base.
Sales unit: 50 pieces
Lieske Part No.: 382989

The bases and clips for Helawrap are flexible and efficient. They enclose the protective tube for a firm hold. Each clip can be attached to each other or to a mounting plate. Each clip is freely movable. Easy to attach and reusable. Various Helawrap clips in the right sizes are used to complete the Helawrap cable management system. The clips and mounting bases can be coupled together as desired and mounted either with screws or conveniently with an adhesive base.
Sales unit: 50 pieces
Lieske Part No.: 748543

The bases and clips for Helawrap are flexible and efficient. They enclose the protective tube for a firm hold. Each clip can be attached to each other or to a mounting plate. Each clip is freely movable. Easy to attach and reusable. Various Helawrap clips in the right sizes are used to complete the Helawrap cable management system. The clips and mounting bases can be coupled together as desired and mounted either with screws or conveniently with an adhesive base.
Sales unit: 50 pieces
Lieske Part No.: 892150

The bases and clips for Helawrap are flexible and efficient. They enclose the protective tube for a firm hold. Each clip can be attached to each other or to a mounting plate. Each clip is freely movable. Easy to attach and reusable. Various Helawrap clips in the right sizes are used to complete the Helawrap cable management system. The clips and mounting bases can be coupled together as desired and mounted either with screws or conveniently with an adhesive base.
Sales unit: 50 pieces
Lieske Part No.: 695532

The bases and clips for Helawrap are flexible and efficient. They enclose the protective tube for a firm hold. Each clip can be attached to each other or to a mounting plate. Each clip is freely movable. Easy to attach and reusable. Various Helawrap clips in the right sizes are used to complete the Helawrap cable management system. The clips and mounting bases can be coupled together as desired and mounted either with screws or conveniently with an adhesive base.
Sales unit: 50 pieces
Lieske Part No.: 488993

One-piece. Rotating hose thread. Vibration and tensile resistant. Large inner diameter. Inner grommet protects cable. Good resistance to chemicals. Straight fitting with rotating hose thread. Meets IP54 with FlexiGuard FG protective conduits.
Sales unit: 10 pieces
Lieske Part No.: 345620

One-piece. Rotating hose thread. Vibration and tensile resistant. Large inner diameter. Inner grommet protects cable. Good resistance to chemicals. Straight fitting with rotating hose thread. Meets IP54 with FlexiGuard FG protective conduits.
Sales unit: 10 pieces
Lieske Part No.: 606126

One-piece. Rotating hose thread. Vibration and tensile resistant. Large inner diameter. Inner grommet protects cable. Good resistance to chemicals. Straight fitting with rotating hose thread. Meets IP54 with FlexiGuard FG protective conduits.
Sales unit: 10 pieces
Lieske Part No.: 132648

One-piece. Rotating hose thread. Vibration and tensile resistant. Large inner diameter. Inner grommet protects cable. Good resistance to chemicals. Straight fitting with rotating hose thread. Meets IP54 with FlexiGuard FG protective conduits.
Sales unit: 10 pieces
Lieske Part No.: 412474

One-piece. Rotating hose thread. Vibration and tensile resistant. Large inner diameter. Inner grommet protects cable. Good resistance to chemicals. Straight fitting with rotating hose thread. Meets IP54 with FlexiGuard FG protective conduits.
Sales unit: 10 pieces
Lieske Part No.: 869670

Compatible with the IWS corrugated pipes. Safe and secure hold of the corrugated pipe. Easy to close and reopen the lid. Cable tie holder on both sides. Pre-fixing of the corrugated pipe in the open state. Can be fixed with screws and matched to the mounting rails of the control cabinets. Additional laying of a ground cable, for example, on the corrugated pipe is possible (through a recess in the lid). Self-extinguishing according to UL94 HB. The CTCC IWS corrugated pipe holders are used in the control cabinet to attach and guide the IWS corrugated pipes.
Sales unit: 20 pieces
Lieske Part No.: 1056071

Compatible with the IWS corrugated pipes. Safe and secure hold of the corrugated pipe. Easy to close and reopen the lid. Cable tie holder on both sides. Pre-fixing of the corrugated pipe in the open state. Can be fixed with screws and matched to the mounting rails of the control cabinets. Additional laying of a ground cable, for example, on the corrugated pipe is possible (through a recess in the lid). Self-extinguishing according to UL94 HB. The CTCC IWS corrugated pipe holders are used in the control cabinet to attach and guide the IWS corrugated pipes.
Sales unit: 20 pieces
Lieske Part No.: 1056072

Compatible with the IWS corrugated pipes. Safe and secure hold of the corrugated pipe. Easy to close and reopen the lid. Cable tie holder on both sides. Pre-fixing of the corrugated pipe in the open state. Can be fixed with screws and matched to the mounting rails of the control cabinets. Additional laying of a ground cable, for example, on the corrugated pipe is possible (through a recess in the lid). Self-extinguishing according to UL94 HB. The CTCC IWS corrugated pipe holders are used in the control cabinet to attach and guide the IWS corrugated pipes.
Sales unit: 20 pieces
Lieske Part No.: 1055134

Compatible with the IWS corrugated pipes. Safe and secure hold of the corrugated pipe. Easy to close and reopen the lid. Cable tie holder on both sides. Pre-fixing of the corrugated pipe in the open state. Can be fixed with screws and matched to the mounting rails of the control cabinets. Additional laying of a ground cable, for example, on the corrugated pipe is possible (through a recess in the lid). Self-extinguishing according to UL94 HB. The CTCC IWS corrugated pipe holders are used in the control cabinet to attach and guide the IWS corrugated pipes.
Sales unit: 20 pieces
Lieske Part No.: 1055135

Detachable and reusable clamps. Self-locking. For process-safe installation: processing with tools recommended. Unlocking by pushing the wings apart from the side. For high operating temperatures: glass fiber reinforced PA66 material. Our Snapper series made of plastic can be used instead of metal pipe clamps. As a hose fastener, the Snapper's application ranges from use in the automotive and agricultural machinery sector to white goods, ventilation construction, pumps and hydraulics to medical technology.
Sales unit: 100 pieces
Lieske Part No.: 1133117

Quantity: 20000 ST.
Sales unit: 100 pieces
Lieske Part No.: 941367

Detachable and reusable clamps. Self-locking. For process-safe installation: processing with tools recommended. Unlocking by pushing the wings apart from the side. For high operating temperatures: glass fiber reinforced PA66 material. Our Snapper series made of plastic can be used instead of metal pipe clamps. As a hose fastener, the Snapper's application ranges from use in the automotive and agricultural machinery sector to white goods, ventilation construction, pumps and hydraulics to medical technology.
Sales unit: 2000 pieces
Lieske Part No.: 1133116