Clamps in Fixing hardware

Spacer sleeve for mounting suspended components under insulated ceilings. Prevents the insulation from being pushed in when tightening the fastening screws.
Low burr, galvanized inside and out.
Lieske Part No.: 1002522

Spacer sleeve for mounting suspended components under insulated ceilings. Prevents the insulation from being pushed in when tightening the fastening screws.
Low burr, galvanized inside and out.
Lieske Part No.: 1338427

Spacer sleeve for mounting suspended components under insulated ceilings. Prevents the insulation from being pushed in when tightening the fastening screws.
Low burr, galvanized inside and out.
Lieske Part No.: 1002524

Spacer sleeve for mounting suspended components under insulated ceilings. Prevents the insulation from being pushed in when tightening the fastening screws.
Low burr, galvanized inside and out.
Lieske Part No.: 1338426

Spacer sleeve for mounting suspended components under insulated ceilings. Prevents the insulation from being pushed in when tightening the fastening screws.
Low burr, galvanized inside and out.
Lieske Part No.: 1338425

Spacer sleeve for mounting suspended components under insulated ceilings. Prevents the insulation from being pushed in when tightening the fastening screws.
Low burr, galvanized inside and out.
Lieske Part No.: 1338424

Spacer sleeve for mounting suspended components under insulated ceilings. Prevents the insulation from being pushed in when tightening the fastening screws.
Low burr, galvanized inside and out.
Lieske Part No.: 1338423

Spacer sleeve for mounting suspended components under insulated ceilings. Prevents the insulation from being pushed in when tightening the fastening screws.
Low burr, galvanized inside and out.
Lieske Part No.: 1338422

Spacer sleeve for mounting suspended components under insulated ceilings. Prevents the insulation from being pushed in when tightening the fastening screws.
Low burr, galvanized inside and out.
Lieske Part No.: 1338421

Spacer sleeve for mounting suspended components under insulated ceilings. Prevents the insulation from being pushed in when tightening the fastening screws.
Low burr, galvanized inside and out.
Lieske Part No.: 1338420

Bend protection sleeve, for cable diameter of 4 mm ... 12 mm, Diameter: 12 mm, Color: black
Sales unit: 25 pieces
Lieske Part No.: 619183

Strain relief clamp
Sales unit: 25 pieces
Lieske Part No.: 133020

Cable clamp, for DIN rails
Sales unit: 25 pieces
Lieske Part No.: 145470

Cable clamp, for DIN rails
Sales unit: 25 pieces
Lieske Part No.: 145472

Cable clamp, for DIN rails
Sales unit: 25 pieces
Lieske Part No.: 934603

Kabelschelle, für Profilschiene Verkaufseinheit: 25 ST.
Sales unit: 25 pieces
Lieske Part No.: 501821

Fastening clip, diameter: 4 mm, colour: white
Sales unit: 100 pieces
Lieske Part No.: 1259213

Fastening clip, diameter: 6 mm, colour: white
Sales unit: 100 pieces
Lieske Part No.: 1236183

Montagebänder mit Kunststoffummantelung Eisen, gelocht, verzinkt auf Rolle à 10 m Verkaufseinheit: 10 ST.
Sales unit: 10 pieces
Lieske Part No.: 1244251

Montagebänder mit Kunststoffummantelung Eisen, gelocht, verzinkt auf Rolle à 10 m Verkaufseinheit: 1 ST.
Sales unit: 10 pieces
Lieske Part No.: 2144116

Montagebänder in Kassette Eisen, gelocht, verzinkt auf Rolle à 10 m Verkaufseinheit: 1 ST.
Sales unit: 10 pieces
Lieske Part No.: 1244111

Knotenkette nach DIN 5686 Stahl, verzinkt, 30 m Bund Verkaufseinheit: 30 MTR
Sales unit: 30 meters
Lieske Part No.: 1244340

Ersatzglied für Knotenkette Stahl, verzinkt Verkaufseinheit: 1 ST.
Sales unit: 100 pieces
Lieske Part No.: 1244262

Kabelsammelhalter Für alle Ausführungen: Material: hochschlagzähes PP, Material: halogenfrei Für Wand- und Deckenmontage. Montageabstand bei voller Belegung: zwischen 50 und 60 cm. Farbe: lichtgrau, RAL 7035 Verkaufseinheit: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 1244343

Kabelsammelhalter Für alle Ausführungen: Material: Stahlblech verzinkt Für Wand- und Deckenmontage. Montageabstand bei voller Belegung: zwischen 50 und 60 cm. Verkaufseinheit: 1 ST.
Sales unit: 25 pieces
Lieske Part No.: 1357521

Clip-Rohrschellen für metrische Rohre Material: hochschlagzähes PP halogenfrei Farbe: lichtgrau, RAL 7035 Befestigung: Schraubbefestigung mit Langloch oder Befestigung auf Schlagdübel M6 Neu: anreihbar über alle Baugrößen montierbar auf C20-Tragschienen Verkaufseinheit: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 1244328

Clip-Rohrschellen für metrische Rohre Material: hochschlagzähes PP halogenfrei Farbe: lichtgrau, RAL 7035 Befestigung: Schraubbefestigung mit Langloch oder Befestigung auf Schlagdübel M6 Neu: anreihbar über alle Baugrößen montierbar auf C20-Tragschienen Verkaufseinheit: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 1244329

Clip-Rohrschellen für metrische Rohre Material: hochschlagzähes PP halogenfrei Farbe: lichtgrau, RAL 7035 Befestigung: Schraubbefestigung mit Langloch oder Befestigung auf Schlagdübel M6 Neu: anreihbar über alle Baugrößen montierbar auf C20-Tragschienen Verkaufseinheit: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 1244345

Clip-Rohrschellen für metrische Rohre Material: hochschlagzähes PP halogenfrei Farbe: lichtgrau, RAL 7035 Befestigung: Schraubbefestigung mit Langloch oder Befestigung auf Schlagdübel M6 Neu: anreihbar über alle Baugrößen montierbar auf C20-Tragschienen Verkaufseinheit: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 1244344

Clip-Rohrschellen für metrische Rohre Material: ? hochschlagzähes PP ? halogenfrei Farbe: ? lichtgrau, RAL 7035 Befestigung: ? Schraubbefestigung mit Langloch oder ? Befestigung auf Schlagdübel M6 Neu: ? anreihbar über alle Baugrößen ? montierbar auf C20-Tragschienen Verkaufseinheit: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 1244336

Clip-Rohrschellen für metrische Rohre Material: ? hochschlagzähes PP ? halogenfrei Farbe: ? lichtgrau, RAL 7035 Befestigung: ? Schraubbefestigung mit Langloch oder ? Befestigung auf Schlagdübel M6 Neu: ? anreihbar über alle Baugrößen ? montierbar auf C20-Tragschienen Verkaufseinheit: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 1244335

Clip-Rohrschellen für metrische Rohre Material: ? hochschlagzähes PP ? halogenfrei Farbe: ? lichtgrau, RAL 7035 Befestigung: ? Schraubbefestigung mit Langloch oder ? Befestigung auf Schlagdübel M6 Neu: ? anreihbar über alle Baugrößen ? montierbar auf C20-Tragschienen Verkaufseinheit: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 1244320

Rohrabstandschellen Material: verzinkt Verkaufseinheit: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 1244326

Rohrabstandschellen Material: verzinkt Verkaufseinheit: 75 ST.
Sales unit: 75 pieces
Lieske Part No.: 1244325

Rohrabstandschellen Material: verzinkt Verkaufseinheit: 50 ST.
Sales unit: 50 pieces
Lieske Part No.: 1244324

Rohrabstandschellen Material: verzinkt Verkaufseinheit: 40 ST.
Sales unit: 40 pieces
Lieske Part No.: 1244323

Rohrabstandschellen Material: verzinkt Verkaufseinheit: 30 ST.
Sales unit: 30 pieces
Lieske Part No.: 1244297

Rohrabstandschellen Material: verzinkt Verkaufseinheit: 20 ST.
Sales unit: 20 pieces
Lieske Part No.: 1244334

The set consists of: 550 x cable supports including adhesive disc (P001) and 1 x drilling template for cavity wall box (P102).
Lieske Part No.: 683317

The set consists of: 1000 x Primoclip (P076).
Lieske Part No.: 683316

Trennkeil zum Aufkeilen und Distanzieren von Kabeladern bei Verwendung von Abzweigklemme oder Verbindern. Aus schlagfestem Kunststoff. Für Erdkabel von 50 mm² bis 185 mm² Verkaufseinheit: 1 ST.
Lieske Part No.: 498806

Bündelschellen aus hochwertigem elastischem Kunststoff zur Bündelung bei der Verlegung von Einleiterkabeln. Verkaufseinheit: 200 ST.
Sales unit: 200 pieces
Lieske Part No.: 513037

Bündelschellen aus hochwertigem elastischem Kunststoff zur Bündelung bei der Verlegung von Einleiterkabeln. Verkaufseinheit: 1 ST.
Lieske Part No.: 513032

Grey fastening clamp made of plastic/polypropylene is suitable for simple and precise fastening of steel armored pipes in accordance with DIN 49020 and heavy insulating pipes in accordance with DIN 49016. During assembly, assembly corrections can be made using a 6 mm impact dowel or wood screw through the slot. The fastening clamps can be inserted into C-profile rails with a slot width of 11 mm and can be aligned with almost all common pipe clamps.
Instructions for use 5 mm hole:
Impact assembly 5 mm nail dowel, screw assembly or assembly on M6 thread Instructions
for use 6 mm hole:
Impact assembly 6 mm nail dowel, screw assembly (head diameter 8 mm)
Sales unit: 50 pieces
Lieske Part No.: 2022251

Grey fastening clamp made of plastic/polypropylene is suitable for simple and precise fastening of steel armored pipes in accordance with DIN 49020 and heavy insulating pipes in accordance with DIN 49016. During assembly, assembly corrections can be made using a 6 mm impact dowel or wood screw through the slot. The fastening clamps can be inserted into C-profile rails with a slot width of 11 mm and can be aligned with almost all common pipe clamps.
Instructions for use 5 mm hole:
Impact assembly 5 mm nail dowel, screw assembly or assembly on M6 thread Instructions
for use 6 mm hole:
Impact assembly 6 mm nail dowel, screw assembly (head diameter 8 mm)
Sales unit: 50 pieces
Lieske Part No.: 2022252

Grey fastening clamp made of plastic/polypropylene is suitable for simple and precise fastening of steel armored pipes in accordance with DIN 49020 and heavy insulating pipes in accordance with DIN 49016. During assembly, assembly corrections can be made using a 6 mm impact dowel or wood screw through the slot. The fastening clamps can be inserted into C-profile rails with a slot width of 11 mm and can be aligned with almost all common pipe clamps.
Instructions for use 5 mm hole:
Impact assembly 5 mm nail dowel, screw assembly or assembly on M6 thread Instructions
for use 6 mm hole:
Impact assembly 6 mm nail dowel, screw assembly (head diameter 8 mm)
Sales unit: 50 pieces
Lieske Part No.: 2022253

Grey fastening clamp made of plastic/polypropylene is suitable for simple and precise fastening of steel armored pipes in accordance with DIN 49020 and heavy insulating pipes in accordance with DIN 49016. During assembly, assembly corrections can be made using a 6 mm impact dowel or wood screw through the slot. The fastening clamps can be inserted into C-profile rails with a slot width of 11 mm and can be aligned with almost all common pipe clamps.
Instructions for use 5 mm hole:
Impact assembly 5 mm nail dowel, screw assembly or assembly on M6 thread Instructions
for use 6 mm hole:
Impact assembly 6 mm nail dowel, screw assembly (head diameter 8 mm)
Sales unit: 30 pieces
Lieske Part No.: 2022254

The plug-in loop is perfect for attaching cables. It can be inserted by hand without tools and is therefore quick and easy to use. It is suitable for stone, concrete, hollow brick, sand-lime brick and aerated concrete. The plastic is halogen and silicone free. The temperature resistance is 80 °C long-term, 130 °C short-term, -10 °C during assembly and +40 °C during use. The plug-in loop is flame-retardant according to UL 84HB. The product can be used under UV exposure in dry and humid climates for at least five years without loss of its performance properties and is UV-resistant.
Sales unit: 200 pieces
Lieske Part No.: 2022256

The plug-in loop is perfect for attaching cables. It can be inserted by hand without tools and is therefore quick and easy to use. It is suitable for stone, concrete, hollow brick, sand-lime brick and aerated concrete. The plastic is halogen and silicone free. The temperature resistance is 80 °C long-term, 130 °C short-term, -10 °C during assembly and +40 °C during use. The plug-in loop is flame-retardant according to UL 84HB. The product can be used under UV exposure in dry and humid climates for at least five years without loss of its performance properties and is UV-resistant.
Sales unit: 100 pieces
Lieske Part No.: 2022257

The plug-in loop is perfect for attaching cables. It can be inserted by hand without tools and is therefore quick and easy to use. It is suitable for stone, concrete, hollow brick, sand-lime brick and aerated concrete. The plastic is halogen and silicone free. The temperature resistance is 80 °C long-term, 130 °C short-term, -10 °C during assembly and +40 °C during use. The plug-in loop is flame-retardant according to UL 84HB. The product can be used under UV exposure in dry and humid climates for at least five years without loss of its performance properties and is UV-resistant.
Sales unit: 50 pieces
Lieske Part No.: 2022258