Clamps in Fixing hardware

Antenna pipe clamp according to DIN EN 62561-1, for connecting pipes to the protective and functional equipotential bonding according to DIN VDE 0100-410/540 and the lightning protection equipotential bonding according to DIN EN 62305-3 (VDE 0185-305-3). Complete with continuously adjustable clamping band made of stainless steel, for connecting 1 conductor Rd D10 mm or 1-2 conductors Rd D6-8 mm or 4-50 mm² (single-/multi-wire).
Lieske Part No.: 271910

Dutchclamp® SE cable clamps were specially developed for the short-circuit-proof fastening of single-core or multi-core medium and high-voltage cables. SE types are available in 7 models and are suitable for cables with a diameter of 15mm to 170mm.
Dutchclamp® SE cable clamps are unique in their kind. The surfaces on which the cables are laid are free of sharp edges and therefore ensure perfect pressure distribution and maximum hold. This way there are no point loads on
the cables and the cables are not damaged. Dutchclamp SE cable clamps are made from glass fiber reinforced polyamide of the highest quality. This makes them ideal for use in systems in which very high short-circuit forces are released.
The unique raw material used to manufacture the cable clamps makes them resistant to corrosion, ozone, frost, heat, oil, acids, salts, aggressive chemicals, UV radiation and nuclear radiation. At temperatures between -40 °C and +125 °C
(briefly up to 225 °C) there is no reduction in strength. Sales unit: 1 ST.
Lieske Part No.: 556916

Non-continuous cable management solution with a wide base and smooth beveled edges. Provides optimal support for high-performance data cables, including CAT7 and fiber optic cables. 33 mm (1 5/16¿) diameter.
Sales unit: 50 pieces
Lieske Part No.: 1264075

Easy installation to support flanges. Provides optimal support for high performance data cables up to and including Cat 5e, Cat 6, Cat 6A, Cat 7 and fiber optic. Offers superior fill capacity and load bearing capacity beyond most other single bracket alternatives. Rounded edges on the J-hooks allow support of the appropriate bend radius of high performance data cables. Cost effective alternative to expensive cable trays. Conforms to EN 50174-2. Conforms to ISO®/IEC 14763-2, ANSI®/TIA 568 and ANSI®/TIA 569.
Sales unit: 50 pieces
Lieske Part No.: 1263608

Easy installation to support flanges. Pivot bearing to support various cable directions. Provides optimal support for high performance data cables up to and including Cat 5e, Cat 6, Cat 6A, Cat 7 and fiber optic. Offers superior fill capacity and load bearing capacity beyond most other single bracket alternatives. Rounded edges on the J-hooks allow support of the appropriate bend radius of high performance data cables. Cost effective alternative to expensive cable trays. Conforms to EN 50174-2. Conforms to ISO®/IEC 14763-2, ANSI®/TIA 568 and ANSI®/TIA 569.
Sales unit: 50 pieces
Lieske Part No.: 1263620

Easy installation to support flanges. Pivot bearing to support various cable directions. Provides optimal support for high performance data cables up to and including Cat 5e, Cat 6, Cat 6A, Cat 7 and fiber optic. Offers superior fill capacity and load bearing capacity beyond most other single bracket alternatives. Rounded edges on the J-hooks allow support of the appropriate bend radius of high performance data cables. Cost effective alternative to expensive cable trays. Conforms to EN 50174-2. Conforms to ISO®/IEC 14763-2, ANSI®/TIA 568 and ANSI®/TIA 569.
Sales unit: 50 pieces
Lieske Part No.: 1264062

Non-continuous cable management solution combined with CADDY attachment to threaded rods. 33 mm (1 5/16¿) J-hook with multifunctional M4-M8 (1/4¿) threaded rod hanger that combines optimal support and easy installation.
Sales unit: 50 pieces
Lieske Part No.: 1264105

With insert, the metal cable bracket achieves a functional integrity of E30 according to DIN 4102-12.
Sales unit: 50 pieces
Lieske Part No.: 2068517

Verkaufseinheit: 50 ST.
Sales unit: 50 pieces
Lieske Part No.: 683620

Verkaufseinheit: 50 ST.
Sales unit: 50 pieces
Lieske Part No.: 683621

For attaching cables or plastic cable protection pipes to ceilings. The snap clip for attaching to the ceiling. For mounting in two different orientations. Fits into any hole of 6 mm or larger.
Sales unit: 100 pieces
Lieske Part No.: 1261415

For attaching cables or plastic cable protection pipes to ceilings. The snap clip for attaching to the ceiling. For mounting in two different orientations. Fits into any hole of 6 mm or larger.
Sales unit: 100 pieces
Lieske Part No.: 1261141

For attaching cables or plastic cable protection pipes to ceilings. The snap clip for attaching to the ceiling. For mounting in two different orientations. Fits into any hole of 6 mm or larger.
Sales unit: 100 pieces
Lieske Part No.: 1261140

The clever way to attach cables and cable ducts to support flanges. Only requires a hammer for installation.
Sales unit: 100 pieces
Lieske Part No.: 1427786

Spring steel cable clip that supports the cable or PVC conduit on or under the support flanges. 10-11mm cable for 4-7mm flange, slide onto the flange for installation.
Sales unit: 100 pieces
Lieske Part No.: 1261760

The clever way to attach cables and cable ducts to support flanges. Only requires a hammer for installation.
Sales unit: 100 pieces
Lieske Part No.: 1261416

The clever way to attach cables and cable ducts to support flanges. Only requires a hammer for installation.
Sales unit: 100 pieces
Lieske Part No.: 1261152

The clever way to attach cables and cable ducts to support flanges. Only requires a hammer for installation.
Sales unit: 100 pieces
Lieske Part No.: 1427799

The clever way to attach cables and cable ducts to support flanges. Only requires a hammer for installation.
Sales unit: 100 pieces
Lieske Part No.: 1427784

For attaching cables or plastic cable protection pipes to ceilings. The snap clip for attaching to the ceiling. For mounting in two different orientations. Fits into any hole of 6 mm or larger.
Sales unit: 100 pieces
Lieske Part No.: 1261142

The clever way to attach cables and cable ducts to support flanges. Only requires a hammer for installation.
Sales unit: 100 pieces
Lieske Part No.: 1261178

The clever way to attach cables and cable ducts to support flanges. Only requires a hammer for installation.
Sales unit: 100 pieces
Lieske Part No.: 1261417

Captive threaded pin minimizes the need for additional components.
Sales unit: 100 pieces
Lieske Part No.: 1264096

Sales unit: 1 PC.
Lieske Part No.: 2116241

Galvanized pipe clamp with threaded combination nut and soundproofing insert, for use with non-insulated metal pipes. Use with pipe 15-19mm M8/M10 thread.
Sales unit: 100 pieces
Lieske Part No.: 326589

Galvanized pipe clamp with threaded combination nut and soundproofing insert, for use with non-insulated metal pipes. Use with pipe 19-25mm M8/M10 thread.
Sales unit: 100 pieces
Lieske Part No.: 326593

Galvanized pipe clamp with threaded combination nut and soundproofing insert, for use with non-insulated metal pipes. Use with pipe 31-37mm M8/M10 thread.
Sales unit: 100 pieces
Lieske Part No.: 468814

Galvanized pipe clamp with threaded combination nut and soundproofing insert, for use with non-insulated metal pipes. Use with pipe 58-68mm M8/M10 thread.
Sales unit: 50 pieces
Lieske Part No.: 2068418

Galvanized pipe clamp with threaded combination nut and soundproofing insert, for use with non-insulated metal pipes. Use with pipe 68-78mm M8/M10 thread.
Sales unit: 25 pieces
Lieske Part No.: 2068419

The rolled edge on the clamp body prevents the rubber insert from slipping and avoids corrections during installation. Plastic washers prevent the screws from falling out during installation. Screws with a combination head for slotted or Phillips screwdrivers and an external hexagon. The longer flanges make it easier to access the screws when tightening. The combination nut with M8 and M10 internal thread ensures versatile application options. The screw lengths are adapted to the expanded clamping ranges, thus optimizing storage. Noise reduction category II according to DIN EN ISO 3822-1. Complies with DIN 4109 for noise insulation design. In accordance with DIN EN 13501-1, the fire behavior is classified as E.
Sales unit: 25 pieces
Lieske Part No.: 2068420

The rolled edge on the clamp body prevents the rubber insert from slipping and avoids corrections during installation. Plastic washers prevent the screws from falling out during installation. Screws with a combination head for slotted or Phillips screwdrivers and an external hexagon. The longer flanges make it easier to access the screws when tightening. The combination nut with M8 and M10 internal thread ensures versatile application options. The screw lengths are adapted to the expanded clamping ranges, thus optimizing storage. Noise reduction category II according to DIN EN ISO 3822-1. Complies with DIN 4109 for noise insulation design. In accordance with DIN EN 13501-1, the fire behavior is classified as E.
Sales unit: 25 pieces
Lieske Part No.: 1052627

The rolled edge on the clamp body prevents the rubber insert from slipping and avoids corrections during installation. Plastic washers prevent the screws from falling out during installation. Screws with a combination head for slotted or Phillips screwdrivers and an external hexagon. The longer flanges make it easier to access the screws when tightening. The combination nut with M8 and M10 internal thread ensures versatile application options. The screw lengths are adapted to the expanded clamping ranges, thus optimizing storage. Noise reduction category II according to DIN EN ISO 3822-1. Complies with DIN 4109 for noise insulation design. In accordance with DIN EN 13501-1, the fire behavior is classified as E.
Sales unit: 25 pieces
Lieske Part No.: 1054975

The rolled edge on the clamp body prevents the rubber insert from slipping and avoids corrections during installation. Plastic washers prevent the screws from falling out during installation. Screws with a combination head for slotted or Phillips screwdrivers and an external hexagon. The longer flanges make it easier to access the screws when tightening. The combination nut with M8 and M10 internal thread ensures versatile application options. The screw lengths are adapted to the expanded clamping ranges, thus optimizing storage. Noise reduction category II according to DIN EN ISO 3822-1. Complies with DIN 4109 for noise insulation design. In accordance with DIN EN 13501-1, the fire behavior is classified as E.
Sales unit: 10 pieces
Lieske Part No.: 1054976

The increased opening angle is suitable for all standard pipe diameters. The quick-release system prevents accidental opening when the pipe is moved or adjusted. The quick-release system can be easily closed with one hand. The flanged edge on the clamp body prevents the rubber insert from slipping and avoids corrections during installation. The pressed thread section at the tip of the screw prevents it from falling out during installation. Screws with combination head for slotted or Phillips screwdriver and external hexagon. The longer flanges make it easier to access the screws when tightening. The combination nut with M8 and M10 internal thread ensures versatile application. The screw lengths are adapted to the extended clamping ranges, thus optimizing storage. Noise reduction category II according to DIN EN ISO 3822-1. Complies with DIN 4109 for noise insulation design. In accordance with
Sales unit: 50 pieces
Lieske Part No.: 2036062

Sales unit: 1 PC.
Lieske Part No.: 2116242

Sales unit: 1 PC.
Lieske Part No.: 2116243

Sales unit: 1 PC.
Lieske Part No.: 2116244

Sales unit: 1 PC.
Lieske Part No.: 2116245

Sales unit: 1 PC.
Lieske Part No.: 2116246

Consists of two brackets, nut and bolt. Fits into the open side of the strut mounting rail. Conforms to Manufacturers Standardization Society (MSS) SP-58 (Type 59).
Sales unit: 50 pieces
Lieske Part No.: 2068394

Consists of two brackets, nut and bolt. Fits into the open side of the strut mounting rail. Conforms to Manufacturers Standardization Society (MSS) SP-58 (Type 59).
Sales unit: 50 pieces
Lieske Part No.: 2068395

Consists of two brackets, nut and bolt. Fits into the open side of the strut mounting rail. Conforms to Manufacturers Standardization Society (MSS) SP-58 (Type 59).
Sales unit: 50 pieces
Lieske Part No.: 1264057

Lieske Part No.: 542512

Lieske Part No.: 542513

Lieske Part No.: 984211

Lieske Part No.: 610060

Mit dem fischer Einschlagnagel ED werden die fischer Befestigungsschellen und fischer Lochbänder ohne Vorbohren in Beton eingeschlagen. Für die Montage wird der fischer Einschlagnagel in das Setzeisen SZE eingesetzt. Der Haltering fixiert während des Setzvorganges den Nagel. Mit wenigen Hammerschlägen sitzt der Einschlagnagel fest im Beton. Verkaufseinheit: 200 ST.
Sales unit: 200 pieces
Lieske Part No.: 1240763

Die fischer Befestigungsschelle BSM ist eine einlaschige Schelle aus Metall zur Befestigung von Elektrokabeln, Kunststoff-Isolierrohren und Stahlpanzerrohren. Zur Montage werden die Rohre oder die Kabel in die Schelle eingelegt. In Beton ist die Befestigung mit dem fischer Einschlagnagel zu empfehlen, in Holz mit einer Holz- oder Spanplattenschraube und in allen anderen Baustoffen mit einer Kombination aus Schraube und Dübel. Verkaufseinheit: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 1354923

Die fischer Befestigungsschelle BSM ist eine einlaschige Schelle aus Metall zur Befestigung von Elektrokabeln, Kunststoff-Isolierrohren und Stahlpanzerrohren. Zur Montage werden die Rohre oder die Kabel in die Schelle eingelegt. In Beton ist die Befestigung mit dem fischer Einschlagnagel zu empfehlen, in Holz mit einer Holz- oder Spanplattenschraube und in allen anderen Baustoffen mit einer Kombination aus Schraube und Dübel. Verkaufseinheit: 1 ST.
Lieske Part No.: 1354924

Die fischer Befestigungsschelle BSM ist eine einlaschige Schelle aus Metall zur Befestigung von Elektrokabeln, Kunststoff-Isolierrohren und Stahlpanzerrohren. Zur Montage werden die Rohre oder die Kabel in die Schelle eingelegt. In Beton ist die Befestigung mit dem fischer Einschlagnagel zu empfehlen, in Holz mit einer Holz- oder Spanplattenschraube und in allen anderen Baustoffen mit einer Kombination aus Schraube und Dübel. Verkaufseinheit: 50 ST.
Sales unit: 50 pieces
Lieske Part No.: 1354915