U-clamp with RS foot, metal pressure tray with rounded edges for cable protection. For vertical and horizontal mounting of 1 single cable on round profiles or pipes. With 1-start screw on pressure tray, universal hexagon screw head SW10, with slot and Phillips. Suitable for all round profile irons or pipes with a diameter of up to 22 mm. Suitable for indoor and outdoor mounting. The use of a counter tray is recommended.
Sales unit: 100 pieces
Lieske Part No.: 2094330

U-clamp with RS foot, metal pressure tray with rounded edges for cable protection. For vertical and horizontal mounting of 1 single cable on round profiles or pipes. With 1-start screw on pressure tray, universal hexagon screw head SW10, with slot and Phillips. Suitable for all round profile irons or pipes with a diameter of up to 22 mm. Suitable for indoor and outdoor mounting. The use of a counter tray is recommended.
Sales unit: 100 pieces
Lieske Part No.: 2094331

U-clamp with RS foot, metal pressure tray with rounded edges for cable protection. For vertical and horizontal mounting of 1 single cable on round profiles or pipes. With 1-start screw on pressure tray, universal hexagon screw head SW10, with slot and Phillips. Suitable for all round profile irons or pipes with a diameter of up to 22 mm. Suitable for indoor and outdoor mounting. The use of a counter tray is recommended.
Sales unit: 100 pieces
Lieske Part No.: 2094332

U-clamp with RS foot, metal pressure tray with rounded edges for cable protection. For vertical and horizontal mounting of 1 single cable on round profiles or pipes. With 1-start screw on pressure tray, universal hexagon screw head SW10, with slot and Phillips. Suitable for all round profile irons or pipes with a diameter of up to 22 mm. Suitable for indoor and outdoor mounting. The use of a counter tray is recommended.
Sales unit: 100 pieces
Lieske Part No.: 2094333

U-clamp with RS foot, metal pressure tray with rounded edges for cable protection. For vertical and horizontal mounting of 1 single cable on round profiles or pipes. With 1-start screw on pressure tray, universal hexagon screw head SW10, with slot and Phillips. Suitable for all round profile irons or pipes with a diameter of up to 22 mm. Suitable for indoor and outdoor mounting. The use of a counter tray is recommended.
Sales unit: 100 pieces
Lieske Part No.: 2094334

U-clamp with RS foot, metal pressure tray with rounded edges for cable protection. For vertical and horizontal mounting of 1 single cable on round profiles or pipes. With 1-start screw on pressure tray, universal hexagon screw head SW10, with slot and Phillips. Suitable for all round profile irons or pipes with a diameter of up to 22 mm. Suitable for indoor and outdoor mounting. The use of a counter tray is recommended.
Sales unit: 100 pieces
Lieske Part No.: 2094335

U-clamp with RS foot, metal pressure tray with rounded edges for cable protection. For vertical and horizontal mounting of 1 single cable on round profiles or pipes. With 1-start screw on pressure tray, universal hexagon screw head SW10, with slot and Phillips. Suitable for all round profile irons or pipes with a diameter of up to 22 mm. Suitable for indoor and outdoor mounting. The use of a counter tray is recommended.
Sales unit: 100 pieces
Lieske Part No.: 2094336

For the electrical connection of the shielding braid of shielded cables,
supplied complete with counter pan, pressure pan and counter pan made of VA.
A cable shield for protection against electromagnetic interference can also contribute to potential equalization because its two ends are connected to the reference potential.
Sales unit: 50 pieces
Lieske Part No.: 986652

Clamp with N-foot, metal pressure tray with rounded edges for cable protection. For electrical connection of the shield braid of shielded cables. For vertical and horizontal mounting of 1 single cable on C-profile rail. For slot width 11 - 12 mm. With 1-start screw on pressure tray, universal hexagon screw head SW10, with slot and Phillips. Suitable for indoor and outdoor installation. The cable shield can also be used for potential equalization if both ends are connected to the reference potential. Counter tray included in delivery.
Sales unit: 50 pieces
Lieske Part No.: 110293

Clamp with N-foot, metal pressure tray with rounded edges for cable protection. For electrical connection of the shield braid of shielded cables. For vertical and horizontal mounting of 1 single cable on C-profile rail. For slot width 11 - 12 mm. With 1-start screw on pressure tray, universal hexagon screw head SW10, with slot and Phillips. Suitable for indoor and outdoor installation. The cable shield can also be used for potential equalization if both ends are connected to the reference potential. Counter tray included in delivery.
Sales unit: 50 pieces
Lieske Part No.: 2094337

Clamp with N-foot, metal pressure tray with rounded edges for cable protection. For electrical connection of the shield braid of shielded cables. For vertical and horizontal mounting of 1 single cable on C-profile rail. For slot width 11 - 12 mm. With 1-start screw on pressure tray, universal hexagon screw head SW10, with slot and Phillips. Suitable for indoor and outdoor installation. The cable shield can also be used for potential equalization if both ends are connected to the reference potential. Counter tray included in delivery.
Sales unit: 50 pieces
Lieske Part No.: 2094338

Clamp with N-foot, metal pressure tray with rounded edges for cable protection. For electrical connection of the shield braid of shielded cables. For vertical and horizontal mounting of 1 single cable on C-profile rail. For slot width 11 - 12 mm. With 1-start screw on pressure tray, universal hexagon screw head SW10, with slot and Phillips. Suitable for indoor and outdoor installation. The cable shield can also be used for potential equalization if both ends are connected to the reference potential. Counter tray included in delivery.
Sales unit: 50 pieces
Lieske Part No.: 2094339

Clamp with N-foot, metal pressure tray with rounded edges for cable protection. For electrical connection of the shield braid of shielded cables. For vertical and horizontal mounting of 1 single cable on C-profile rail. For slot width 11 - 12 mm. With 1-start screw on pressure tray, universal hexagon screw head SW10, with slot and Phillips. Suitable for indoor and outdoor installation. The cable shield can also be used for potential equalization if both ends are connected to the reference potential. Counter tray included in delivery.
Sales unit: 50 pieces
Lieske Part No.: 2094340

For attaching strip earthing strips up to 30 mm wide to profile rails, suitable for all
C-profile rails with 16 - 17 mm slot width.
Sales unit: 25 pieces
Lieske Part No.: 915290

Clamp body, screw and counter plate made of hot-dip galvanized steel, pressure and counter pan made of polypropylene, halogen-free, light grey RAL 7035.
Supplied complete with counter plate and counter pans.
Sales unit: 25 pieces
Lieske Part No.: 617702

Clamp body, screw and counter plate made of hot-dip galvanized steel, pressure and counter pan made of polypropylene, halogen-free, light grey RAL 7035.
Supplied complete with counter plate and counter pans.
Sales unit: 25 pieces
Lieske Part No.: 569943

Clamp body, screw and counter plate made of hot-dip galvanized steel, pressure and counter pan made of polypropylene, halogen-free, light grey RAL 7035.
Supplied complete with counter plate and counter pans.
Sales unit: 25 pieces
Lieske Part No.: 982419

Clamp body, screw and counter plate made of hot-dip galvanized steel, pressure and counter pan made of polypropylene, halogen-free, light grey RAL 7035.
Supplied complete with counter plate and counter pans.
Sales unit: 25 pieces
Lieske Part No.: 907034

Clamp body, screw and counter plate made of hot-dip galvanized steel, pressure and counter pan made of polypropylene, halogen-free, light grey RAL 7035.
Supplied complete with counter plate and counter pans.
Sales unit: 25 pieces
Lieske Part No.: 615213

Clamp body, screw and counter plate made of hot-dip galvanized steel, pressure and counter pan made of polypropylene, halogen-free, light grey RAL 7035.
Supplied complete with counter plate and counter pans.
Sales unit: 25 pieces
Lieske Part No.: 572470

Clamp body, screw and counter plate made of hot-dip galvanized steel, pressure and counter pan made of polypropylene, halogen-free, light grey RAL 7035.
Supplied complete with counter plate and counter pans.
Sales unit: 25 pieces
Lieske Part No.: 890428

Clamp body, screw and counter plate made of hot-dip galvanized steel, pressure and counter pan made of polypropylene, halogen-free, light grey RAL 7035.
Supplied complete with counter plate and counter pans.
Sales unit: 25 pieces
Lieske Part No.: 699336

Clamp body, screw and counter plate made of hot-dip galvanized steel, pressure and counter pan made of polypropylene, halogen-free, light grey RAL 7035.
Supplied complete with counter plate and counter pans.
Sales unit: 25 pieces
Lieske Part No.: 764715

U-clamp with hammer head base, metal pressure tray with rounded edges for cable protection. For vertical and horizontal mounting of 1 single cable on C-profile rail. For slot width 16 - 17 mm. With 1-start screw on pressure tray, universal hexagon screw head SW10, with slot and Phillips. Suitable for indoor and outdoor installation. Counter tray must be ordered separately.
Lieske Part No.: 2072114

U-clamp with hammer head base, metal pressure tray with rounded edges for cable protection. For vertical and horizontal mounting of 2 individual cables on C-profile rail. For slot width 16 - 17 mm. With 1-start screw on pressure tray, universal hexagon screw head SW10, with slot and Phillips. Suitable for indoor and outdoor installation. Multiple cables should be separated by double trays. The use of a counter tray is recommended.
Lieske Part No.: 2072115

U-clamp with hammer head base, metal pressure tray with rounded edges for cable protection. For vertical and horizontal mounting of 3 individual cables on C-profile rail. For slot width 16 - 17 mm. With 1-start screw on pressure tray, universal hexagon screw head SW10, with slot and Phillips. Suitable for indoor and outdoor installation. Multiple cables should be separated by double trays. The use of a counter tray is recommended.
Sales unit: 50 pieces
Lieske Part No.: 2072116

U-clamp with hammer head base, metal pressure tray with rounded edges for cable protection. For vertical and horizontal mounting of 1 single cable on C-profile rail. For slot width 16 - 17 mm. With 1-start screw on pressure tray, universal hexagon screw head SW10, with slot and Phillips. Suitable for indoor and outdoor installation. Counter tray must be ordered separately.
Lieske Part No.: 2072117

U-clamp with hammer head base, metal pressure tray with rounded edges for cable protection. For vertical and horizontal mounting of 2 individual cables on C-profile rail. For slot width 16 - 17 mm. With 1-start screw on pressure tray, universal hexagon screw head SW10, with slot and Phillips. Suitable for indoor and outdoor installation. Multiple cables should be separated by double trays. The use of a counter tray is recommended.
Sales unit: 50 pieces
Lieske Part No.: 1102697

U-clamp with hammer head base, metal pressure tray with rounded edges for cable protection. For vertical and horizontal mounting of 3 individual cables on C-profile rail. For slot width 16 - 17 mm. With 1-start screw on pressure tray, universal hexagon screw head SW10, with slot and Phillips. Suitable for indoor and outdoor installation. Multiple cables should be separated by double trays. The use of a counter tray is recommended.
Sales unit: 50 pieces
Lieske Part No.: 1102698

U-clamp with hammer head base, metal pressure tray with rounded edges for cable protection. For vertical and horizontal mounting of 1 single cable on C-profile rail. For slot width 16 - 17 mm. With 1-start screw on pressure tray, universal hexagon screw head SW10, with slot and Phillips. Suitable for indoor and outdoor installation. Counter tray must be ordered separately.
Lieske Part No.: 2072256

U-clamp with hammer head base, metal pressure tray with rounded edges for cable protection. For vertical and horizontal mounting of 2 individual cables on C-profile rail. For slot width 16 - 17 mm. With 1-start screw on pressure tray, universal hexagon screw head SW10, with slot and Phillips. Suitable for indoor and outdoor installation. Multiple cables should be separated by double trays. The use of a counter tray is recommended.
Sales unit: 50 pieces
Lieske Part No.: 1102699

Bügelschelle mit Hammerkopf-Fuß, Metalldruckwanne mit gerundeten Kanten für Kabelschutz. Zur vertikalen und horizontalen Montage von 3 Einzelkabeln an C-Profilschiene. Für Schlitzweite 16 - 17 mm. Mit 1-gängiger Schraube an Druckwanne, universeller Sechskant-Schraubenkopf SW10, mit Schlitz und Kreuzschlitz. Geeignet für Montage im Innen- und Außenbereich. Mehrere Kabel sollten durch Doppelwannen getrennt werden. Der Einsatz einer Gegenwanne wird empfohlen. Verkaufseinheit: 50 ST.
Sales unit: 50 pieces
Lieske Part No.: 2145461

U-clamp with hammer head base, metal pressure tray with rounded edges for cable protection. For vertical and horizontal mounting of 1 single cable on C-profile rail. For slot width 16 - 17 mm. With 1-start screw on pressure tray, universal hexagon screw head SW10, with slot and Phillips. Suitable for indoor and outdoor installation. Counter tray must be ordered separately.
Lieske Part No.: 2072257

Bügelschelle mit Hammerkopf-Fuß, Metalldruckwanne mit gerundeten Kanten für Kabelschutz. Zur vertikalen und horizontalen Montage von 2 Einzelkabeln an C-Profilschiene. Für Schlitzweite 16 - 17 mm. Mit 1-gängiger Schraube an Druckwanne, universeller Sechskant-Schraubenkopf SW10, mit Schlitz und Kreuzschlitz. Geeignet für Montage im Innen- und Außenbereich. Mehrere Kabel sollten durch Doppelwannen getrennt werden. Der Einsatz einer Gegenwanne wird empfohlen. Verkaufseinheit: 50 ST.
Sales unit: 50 pieces
Lieske Part No.: 871578

U-clamp with hammer head base, metal pressure tray with rounded edges for cable protection. For vertical and horizontal mounting of 1 single cable on C-profile rail. For slot width 16 - 17 mm. With 1-start screw on pressure tray, universal hexagon screw head SW10, with slot and Phillips. Suitable for indoor and outdoor installation. Counter tray must be ordered separately.
Lieske Part No.: 2072258

U-clamp with hammer head base, metal pressure tray with rounded edges for cable protection. For vertical and horizontal mounting of 1 single cable on C-profile rail. For slot width 16 - 17 mm. With 1-start screw on pressure tray, universal hexagon screw head SW10, with slot and Phillips. Suitable for indoor and outdoor installation. Counter tray must be ordered separately.
Lieske Part No.: 2072259

U-clamp with hammer head base, metal pressure tray with rounded edges for cable protection. For vertical and horizontal mounting of 1 single cable on C-profile rail. For slot width 16 - 17 mm. With 1-start screw on pressure tray, universal hexagon screw head SW10, with slot and Phillips. Suitable for indoor and outdoor installation. Counter tray must be ordered separately.
Lieske Part No.: 2072260

Bügelschelle mit Hammerkopf-Fuß, Metalldruckwanne mit gerundeten Kanten für Kabelschutz. Zur vertikalen und horizontalen Montage von 3 Einzelkabeln an C-Profilschiene. Für Schlitzweite 16 - 17 mm. Mit 1-gängiger Schraube an Druckwanne, universeller Sechskant-Schraubenkopf SW10, mit Schlitz und Kreuzschlitz. Geeignet für Montage im Innen- und Außenbereich. Mehrere Kabel sollten durch Doppelwannen getrennt werden. Der Einsatz einer Gegenwanne wird empfohlen. Verkaufseinheit: 25 ST.
Sales unit: 25 pieces
Lieske Part No.: 877101

U-clamp with hammer head base, metal pressure tray with rounded edges for cable protection. For vertical and horizontal mounting of 1 single cable on C-profile rail. For slot width 16 - 17 mm. With 1-start screw on pressure tray, universal hexagon screw head SW10, with slot and Phillips. Suitable for indoor and outdoor installation. Counter tray must be ordered separately.
Lieske Part No.: 2072261

U-clamp with hammer head base, metal pressure tray with rounded edges for cable protection. For vertical and horizontal mounting of 1 single cable on C-profile rail. For slot width 16 - 17 mm. With 1-start screw on pressure tray, universal hexagon screw head SW10, with slot and Phillips. Suitable for indoor and outdoor installation. Counter tray must be ordered separately.
Sales unit: 100 pieces
Lieske Part No.: 110270

U-clamp with hammer head base, metal pressure tray with rounded edges for cable protection. For vertical and horizontal mounting of 1 single cable on C-profile rail. For slot width 16 - 17 mm. With 1-start screw on pressure tray, universal hexagon screw head SW10, with slot and Phillips. Suitable for indoor and outdoor installation. Counter tray must be ordered separately.
Sales unit: 100 pieces
Lieske Part No.: 2072262

Bügelschelle mit Hammerkopf-Fuß, Metalldruckwanne mit gerundeten Kanten für Kabelschutz. Zur vertikalen und horizontalen Montage von 2 Einzelkabeln an C-Profilschiene. Für Schlitzweite 16 - 17 mm. Mit 1-gängiger Schraube an Druckwanne, universeller Sechskant-Schraubenkopf SW10, mit Schlitz und Kreuzschlitz. Geeignet für Montage im Innen- und Außenbereich. Mehrere Kabel sollten durch Doppelwannen getrennt werden. Der Einsatz einer Gegenwanne wird empfohlen. Verkaufseinheit: 50 ST.
Sales unit: 50 pieces
Lieske Part No.: 842131

U-clamp with hammer head base, metal pressure tray with rounded edges for cable protection. For vertical and horizontal mounting of 1 single cable on C-profile rail. For slot width 16 - 17 mm. With 1-start screw on pressure tray, universal hexagon screw head SW10, with slot and Phillips. Suitable for indoor and outdoor installation. Counter tray must be ordered separately.
Sales unit: 50 pieces
Lieske Part No.: 1102700

U-clamp with hammer head base, metal pressure tray with rounded edges for cable protection. For vertical and horizontal mounting of 1 single cable on C-profile rail. For slot width 16 - 17 mm. With 1-start screw on pressure tray, universal hexagon screw head SW10, with slot and Phillips. Suitable for indoor and outdoor installation. Counter tray must be ordered separately.
Sales unit: 25 pieces
Lieske Part No.: 1102701

U-clamp with hammer head base, metal pressure tray with rounded edges for cable protection. For vertical and horizontal mounting of 1 single cable on C-profile rail. For slot width 16 - 17 mm. With 1-start screw on pressure tray, universal hexagon screw head SW10, with slot and Phillips. Suitable for indoor and outdoor installation. Counter tray must be ordered separately.
Sales unit: 25 pieces
Lieske Part No.: 1102702

U-clamp with hammer head base, metal pressure tray with rounded edges for cable protection. For vertical and horizontal mounting of 1 single cable on C-profile rail. For slot width 16 - 17 mm. With 1-start screw on pressure tray, universal hexagon screw head SW10, with slot and Phillips. Suitable for indoor and outdoor installation. Counter tray must be ordered separately.
Sales unit: 25 pieces
Lieske Part No.: 1102708

U-clamp with hammer head base, metal pressure tray with rounded edges for cable protection. For vertical and horizontal mounting of 1 single cable on C-profile rail. For slot width 16 - 17 mm. With 1-start screw on pressure tray, universal hexagon screw head SW10, with slot and Phillips. Suitable for indoor and outdoor installation. Counter tray must be ordered separately.
Sales unit: 25 pieces
Lieske Part No.: 1102709

Bügelschelle mit Hammerkopf-Fuß, Metalldruckwanne mit gerundeten Kanten für Kabelschutz. Zur vertikalen und horizontalen Montage von 1 Einzelkabel an C-Profilschiene. Für Schlitzweite 16 - 17 mm. Mit 1-gängiger Schraube an Druckwanne, universeller Sechskant-Schraubenkopf SW10, mit Schlitz und Kreuzschlitz. Geeignet für Montage im Innen-und Außenbereich. Der Einsatz einer Gegenwanne wird empfohlen. Verkaufseinheit: 50 ST.
Sales unit: 50 pieces
Lieske Part No.: 838803

U-clamp with hammer head base, metal pressure tray with rounded edges for cable protection. For vertical and horizontal mounting of 1 single cable on C-profile rail. For slot width 16 - 17 mm. With 1-start screw on pressure tray, universal hexagon screw head SW10, with slot and Phillips. Suitable for indoor and outdoor mounting. The use of a counter tray is recommended.
Sales unit: 50 pieces
Lieske Part No.: 680650

U-clamp with hammer head base, metal pressure tray with rounded edges for cable protection. For vertical and horizontal mounting of 1 single cable on C-profile rail. For slot width 16 - 17 mm. With 1-start screw on pressure tray, universal hexagon screw head SW10, with slot and Phillips. Suitable for indoor and outdoor mounting. The use of a counter tray is recommended.
Sales unit: 50 pieces
Lieske Part No.: 680655