Solution for simultaneous bundling and fastening. Optimal combination of material and design. Wide variety of fastening elements for different applications. Removable and reusable. Including bundling and fastening of cable harnesses and hoses in control cabinet construction, in the automotive industry and the aerospace industry.
Sales unit: 3000 pieces
Lieske Part No.: 1580427

Easy to install, no tools required. The head of the one-piece takes up a defined position when installed. Expansion anchors lock into place with an audible and tangible click. Wings enable a safe and secure hold in confined spaces. The tie was developed primarily for fastening cable harnesses, pipes and hoses in the automotive industry. Due to its simple and user-friendly application, the fastening tie is also used in other industries, such as aviation, switchgear and the manufacture of household appliances.
Sales unit: 100 pieces
Lieske Part No.: 679567

Easy installation, no tools required. Fastening tie with expansion anchor without wings. Expansion anchors lock into place with an audible and tangible click. The head of the divider assumes a defined position when installed. This fastening tie is particularly suitable for installation in tight spaces due to its very slim geometry.
Sales unit: 500 pieces
Lieske Part No.: 1580389

Easy installation, no tools required. Expansion anchors lock into place with an audible and tangible click. High pull-out and holding force, even when subjected to loads from different directions. Plates protect against dirt and dust penetration. KSFT variants with rounded expansion anchors for minimized installation height. The T50SST5 variant offers support against axial displacement. Fastening ties with expansion anchors are used to securely bundle and fasten cable harnesses and hoses in control cabinet construction, the automotive industry and the aerospace industry. This fastening solution is used to secure cable harnesses. We offer a variety of plate thicknesses and hole sizes for every application.
Sales unit: 100 pieces
Lieske Part No.: 521259

Type: T50RFT7-HS-BK-D1
Sales unit: 2500 pc
Sales unit: 500 pieces
Lieske Part No.: 897034

Type: T120R-V0-WH-C1
Sales unit: 100 pc
Sales unit: 100 pieces
Lieske Part No.: 885365

MLT series cable ties made of stainless steel SS316 (V4A). Simple and effective locking system, partially removable. Plastic coating protects against contact corrosion. MLT series metal cable ties are equipped with a folding lock. Bending the webs creates a very firm hold on the bundled goods. Even rigid bundles can be easily fixed with MLT cable ties. Metal cable ties are the first choice for all applications that have increased requirements for holding force, temperature and/or chemical resistance. In the event of a fire, cables, lines or pipes are held securely in place. The use of metal cable ties prevents emergency exits from being blocked by falling cables.
Sales unit: 1000 pieces
Lieske Part No.: 1133531

Type: T18R PA66V0 WH 100 ST sales unit: 1000 ST.
Sales unit: 100 pieces
Lieske Part No.: 427642

Type: LFPC70 PO BK 25 M item: 25 MTR
Sales unit: 25 meters
Lieske Part No.: 560476

Type: T30R-V0-WH-C1
Sales unit: 500 pc
Sales unit: 100 pieces
Lieske Part No.: 639075

MBT cable ties made of stainless steel SS304 (V2A). With non-detachable locking head. Easy to loop through the forked band end. Excellent chemical resistance. Corrosion and weather resistant. High temperature resistant. Non-flammable. Metal cable ties are ideal for all areas with high demands on holding power, durability and fire protection. MBT metal cable ties are used in the chemical industry, on oil platforms, as well as in shipbuilding, mining and rail vehicle construction. The MBT series is a guarantee of safety in lighting technology in stage and exhibition construction.
Sales unit: 100 pieces
Lieske Part No.: 291142

Type: MBT5S SS316 100 ST
Sales unit: 100 pc
Sales unit: 100 pieces
Lieske Part No.: 732150

MBT cable ties made of stainless steel SS304 (V2A). With non-detachable locking head. Easy to loop through the forked band end. Excellent chemical resistance. Corrosion and weather resistant. High temperature resistant. Non-flammable. Metal cable ties are ideal for all areas with high demands on holding power, durability and fire protection. MBT metal cable ties are used in the chemical industry, on oil platforms, as well as in shipbuilding, mining and rail vehicle construction. The MBT series is a guarantee of safety in lighting technology in stage and exhibition construction.
Sales unit: 100 pieces
Lieske Part No.: 171903

MBT cable ties made of stainless steel SS316L (V4A). Permanent locking head. Forked band end for easy looping. Excellent chemical resistance. Corrosion and weather resistant. High temperature resistant. Non-flammable. Metal cable ties are ideal for all areas with high demands on holding power, durability and fire protection. MBT metal cable ties are used in the chemical industry, on oil platforms, as well as in shipbuilding, mining and rail vehicle construction. The MBT series is a guarantee of safety in lighting technology in stage and exhibition construction.
Sales unit: 100 pieces
Lieske Part No.: 140616

MBT cable ties made of stainless steel SS304 (V2A). With non-detachable locking head. Easy to loop through the forked band end. Excellent chemical resistance. Corrosion and weather resistant. High temperature resistant. Non-flammable. Metal cable ties are ideal for all areas with high demands on holding power, durability and fire protection. MBT metal cable ties are used in the chemical industry, on oil platforms, as well as in shipbuilding, mining and rail vehicle construction. The MBT series is a guarantee of safety in lighting technology in stage and exhibition construction.
Sales unit: 100 pieces
Lieske Part No.: 419303

Type: MBT14S SS316 ML 100 ST
Sales unit: 100 pc
Sales unit: 100 pieces
Lieske Part No.: 696394

MBT cable ties made of stainless steel SS304 (V2A). With non-detachable locking head. Easy to loop through the forked band end. Excellent chemical resistance. Corrosion and weather resistant. High temperature resistant. Non-flammable. Metal cable ties are ideal for all areas with high demands on holding power, durability and fire protection. MBT metal cable ties are used in the chemical industry, on oil platforms, as well as in shipbuilding, mining and rail vehicle construction. The MBT series is a guarantee of safety in lighting technology in stage and exhibition construction.
Sales unit: 100 pieces
Lieske Part No.: 476044

MBT cable ties made of stainless steel SS316L (V4A). Permanent locking head. Forked band end for easy looping. Excellent chemical resistance. Corrosion and weather resistant. High temperature resistant. Non-flammable. Metal cable ties are ideal for all areas with high demands on holding power, durability and fire protection. MBT metal cable ties are used in the chemical industry, on oil platforms, as well as in shipbuilding, mining and rail vehicle construction. The MBT series is a guarantee of safety in lighting technology in stage and exhibition construction.
Sales unit: 100 pieces
Lieske Part No.: 2054004

MBT cable ties made of stainless steel SS304 (V2A). With non-detachable locking head. Easy to loop through the forked band end. Excellent chemical resistance. Corrosion and weather resistant. High temperature resistant. Non-flammable. Metal cable ties are ideal for all areas with high demands on holding power, durability and fire protection. MBT metal cable ties are used in the chemical industry, on oil platforms, as well as in shipbuilding, mining and rail vehicle construction. The MBT series is a guarantee of safety in lighting technology in stage and exhibition construction.
Sales unit: 100 pieces
Lieske Part No.: 229989

Type: MBT27S SS316 ML 100 ST sales unit: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 232252

MBT cable ties made of stainless steel SS304 (V2A). With non-detachable locking head. Easy to loop through the forked band end. Excellent chemical resistance. Corrosion and weather resistant. High temperature resistant. Non-flammable. Metal cable ties are ideal for all areas with high demands on holding power, durability and fire protection. MBT metal cable ties are used in the chemical industry, on oil platforms, as well as in shipbuilding, mining and rail vehicle construction. The MBT series is a guarantee of safety in lighting technology in stage and exhibition construction.
Sales unit: 100 pieces
Lieske Part No.: 715648

MBT cable ties made of stainless steel SS316L (V4A). Permanent locking head. Forked band end for easy looping. Excellent chemical resistance. Corrosion and weather resistant. High temperature resistant. Non-flammable. Metal cable ties are ideal for all areas with high demands on holding power, durability and fire protection. MBT metal cable ties are used in the chemical industry, on oil platforms, as well as in shipbuilding, mining and rail vehicle construction. The MBT series is a guarantee of safety in lighting technology in stage and exhibition construction.
Sales unit: 100 pieces
Lieske Part No.: 2054012

Type: LFPC103 PO BK 25 M
Sales unit: 25 MTR
Sales unit: 25 meters
Lieske Part No.: 111696

MBT cable ties made of stainless steel SS304 (V2A). With non-detachable locking head. Easy to loop through the forked band end. Excellent chemical resistance. Corrosion and weather resistant. High temperature resistant. Non-flammable. Metal cable ties are ideal for all areas with high demands on holding power, durability and fire protection. MBT metal cable ties are used in the chemical industry, on oil platforms, as well as in shipbuilding, mining and rail vehicle construction. The MBT series is a guarantee of safety in lighting technology in stage and exhibition construction.
Sales unit: 100 pieces
Lieske Part No.: 649868

Type: MBT8H-316-SS-NA-L1
Sales unit: 50 pc
Sales unit: 100 pieces
Lieske Part No.: 775473

MBT cable ties made of stainless steel SS304 (V2A). With non-detachable locking head. Easy to loop through the forked band end. Excellent chemical resistance. Corrosion and weather resistant. High temperature resistant. Non-flammable. Metal cable ties are ideal for all areas with high demands on holding power, durability and fire protection. MBT metal cable ties are used in the chemical industry, on oil platforms, as well as in shipbuilding, mining and rail vehicle construction. The MBT series is a guarantee of safety in lighting technology in stage and exhibition construction.
Sales unit: 100 pieces
Lieske Part No.: 176526

MBT cable ties made of stainless steel SS316L (V4A). Permanent locking head. Forked band end for easy looping. Excellent chemical resistance. Corrosion and weather resistant. High temperature resistant. Non-flammable. Metal cable ties are ideal for all areas with high demands on holding power, durability and fire protection. MBT metal cable ties are used in the chemical industry, on oil platforms, as well as in shipbuilding, mining and rail vehicle construction. The MBT series is a guarantee of safety in lighting technology in stage and exhibition construction.
Sales unit: 100 pieces
Lieske Part No.: 484104

MLT series cable ties made of stainless steel SS316 (V4A). Simple and effective locking system, partially removable. Plastic coating protects against contact corrosion. MLT series metal cable ties are equipped with a folding lock. Bending the webs creates a very firm hold on the bundled goods. Even rigid bundles can be easily fixed with MLT cable ties. Metal cable ties are the first choice for all applications that have increased requirements for holding force, temperature and/or chemical resistance. In the event of a fire, cables, lines or pipes are held securely in place. The use of metal cable ties prevents emergency exits from being blocked by falling cables.
Sales unit: 100 pieces
Lieske Part No.: 1131178

MBT cable ties made of stainless steel SS304 (V2A). With non-detachable locking head. Easy to loop through the forked band end. Excellent chemical resistance. Corrosion and weather resistant. High temperature resistant. Non-flammable. Metal cable ties are ideal for all areas with high demands on holding power, durability and fire protection. MBT metal cable ties are used in the chemical industry, on oil platforms, as well as in shipbuilding, mining and rail vehicle construction. The MBT series is a guarantee of safety in lighting technology in stage and exhibition construction.
Sales unit: 100 pieces
Lieske Part No.: 773564

MBT cable ties made of stainless steel SS316L (V4A). Permanent locking head. Forked band end for easy looping. Excellent chemical resistance. Corrosion and weather resistant. High temperature resistant. Non-flammable. Metal cable ties are ideal for all areas with high demands on holding power, durability and fire protection. MBT metal cable ties are used in the chemical industry, on oil platforms, as well as in shipbuilding, mining and rail vehicle construction. The MBT series is a guarantee of safety in lighting technology in stage and exhibition construction.
Sales unit: 100 pieces
Lieske Part No.: 236191

Sales Unit: 1 ST.
Sales unit: 50 pieces
Lieske Part No.: 289811

Type: MBT27H SS316 ML 50 ST
Sales unit: 50 pc
Sales unit: 100 pieces
Lieske Part No.: 947377

Sales Unit: 1 ST.
Sales unit: 100 pieces
Lieske Part No.: 289707

Type: MBT33H SS316 ML 50 ST
Sales unit: 500 pc
Sales unit: 100 pieces
Lieske Part No.: 958936

LFPC protective profile made of polyolefin. For the MBT, MST, MLT and AMT series. Smooth surface protects bundled goods even when subjected to vibration. Halogen-free material. Low development of toxic gases and corrosive acids. Low smoke development, flame retardant. The LFPC protective profile made of polyolefin is suitable for the cable ties of the MBT, MST, MLT and AMT series and can protect the bundled goods from abrasion and damage even when subjected to vibration. Ideal for use under difficult conditions, for example on ships, oil platforms or in industrial plants.
Sales unit: 300 meters
Lieske Part No.: 2054874

Type: T50R-V0-WH-C1
Sales unit: 6000 pc
Sales unit: 100 pieces
Lieske Part No.: 960089

Sales Unit: 1 ST.
Sales unit: 100 pieces
Lieske Part No.: 289831

MBT cable ties made of stainless steel SS316L (V4A). Permanent locking head. Forked band end for easy looping. Excellent chemical resistance. Corrosion and weather resistant. High temperature resistant. Non-flammable. Metal cable ties are ideal for all areas with high demands on holding power, durability and fire protection. MBT metal cable ties are used in the chemical industry, on oil platforms, as well as in shipbuilding, mining and rail vehicle construction. The MBT series is a guarantee of safety in lighting technology in stage and exhibition construction.
Sales unit: 100 pieces
Lieske Part No.: 221730

Sales Unit: 1 ST.
Sales unit: 100 pieces
Lieske Part No.: 289813

Type: MBT20XH-316-SS-NA-L1 item: 1 ST.
Sales unit: 100 pieces
Lieske Part No.: 423626

Sales Unit: 1 ST.
Sales unit: 100 pieces
Lieske Part No.: 289776

MBT cable ties made of stainless steel SS316L (V4A). Permanent locking head. Forked band end for easy looping. Excellent chemical resistance. Corrosion and weather resistant. High temperature resistant. Non-flammable. Metal cable ties are ideal for all areas with high demands on holding power, durability and fire protection. MBT metal cable ties are used in the chemical industry, on oil platforms, as well as in shipbuilding, mining and rail vehicle construction. The MBT series is a guarantee of safety in lighting technology in stage and exhibition construction.
Sales unit: 100 pieces
Lieske Part No.: 2054875

Sales Unit: 1 ST.
Sales unit: 500 pieces
Lieske Part No.: 289618

MBT cable ties made of stainless steel SS316L (V4A). Permanent locking head. Forked band end for easy looping. Excellent chemical resistance. Corrosion and weather resistant. High temperature resistant. Non-flammable. Metal cable ties are ideal for all areas with high demands on holding power, durability and fire protection. MBT metal cable ties are used in the chemical industry, on oil platforms, as well as in shipbuilding, mining and rail vehicle construction. The MBT series is a guarantee of safety in lighting technology in stage and exhibition construction.
Sales unit: 100 pieces
Lieske Part No.: 2054876

Made from polyamide 11, a sustainable plastic based on vegetable oil. External teeth and rounded head geometry. Low looping force enables processing by hand. High loop holding force with single or double bar. Gentle on the bundled goods thanks to soft material. High UV resistance for outdoor applications. Properties are retained even at low temperatures. Conditionally resistant to acids, bases and oxidizing agents. Low water absorption ensures long-term technical performance. Integrated pre-locking function on the rear, upper head area. The Robusto cable ties made of polyamide 11 (PA11) have many technical advantages. They are characterized by excellent chemical resistance in the most difficult environments such as offshore, oil drilling rigs or construction vehicles. In addition, the very good UV resistance is a compelling argument for use in cable routing on solar systems.
Sales unit: 100 pieces
Lieske Part No.: 1242284

Quantity: 4000 ST.
Sales unit: 4000 pieces
Lieske Part No.: 956559

Impact-modified material for more flexibility. Good holding power with single or double web. Externally toothed cable ties with a smooth inner side to the bundle. Wide contact surface protects the insulation from damage. Flat head geometry for tight spaces. Parallel looping band. The LPH cable ties are made of PA66. The externally toothed design means the smooth inner side lies against the bundle, so that damage to the insulation can be avoided. The flat geometry of the LPH series enables use in tight spaces. The cable ties are mainly used in the electrical industry, but are also ideal for the construction industry, for heavy-duty applications or the automotive industry.
Sales unit: 3000 pieces
Lieske Part No.: 1426087

The cable ties are made entirely of plastic, making them easy to recycle. The internal teeth of the head guarantees a secure grip fixing. The cable ties can be easily processed by hand or for a process-safe use of a tool (see Chapter 6). The slightly bent tip allows for easy insertion of the tape to the head. Type: T18R-N66-NA-C1 item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 557502

Very large selection of materials and sizes. High holding power with very low looping force. Use of high-quality plastic. Supports our customers' recycling goals. Internal teeth for a secure hold on the bundle. Convenient looping thanks to the angled band end. Easy to process by hand or with tools (process-reliable). T-series cable ties can be used in a wide variety of ways. They are used wherever cables, lines or hoses need to be bundled and fastened. The variety of materials used in the cable ties enables the T-series to be used universally in a wide range of applications.
Sales unit: 100 pieces
Lieske Part No.: 206934

Type: T30R-N66-BK-C1
Sales unit: 100 pc
Sales unit: 100 pieces
Lieske Part No.: 373917