Cable Ties in Fixing hardware

The head of the divider takes up a defined position when assembled. Easy assembly, no tools required. High pull-out and holding force, even when subjected to loads from different directions. Protects against the ingress of dirt and dust. Various sheet thicknesses can be used with a single slatted base part. Also for blind holes with threads. DOP versions for oval holes serve as anti-twisting protection. Originally developed for fastening cable harnesses in the automotive industry, but due to their simplicity and user-friendliness, these parts are also used in other industries, for example in aviation, switchgear manufacturers, household appliance manufacturers.
Sales unit: 500 pieces
Lieske Part No.: 558087

Type: T30RFT5 PA66HS, PA66HIRHS BK ST 500 item: 500 ST.
Sales unit: 500 pieces
Lieske Part No.: 174696

Type: T50RFT5-MC1-BKGY-D1
Sales unit: 500 pc
Sales unit: 500 pieces
Lieske Part No.: 880753

2-part cable tie with welding bolt holder, pre-assembled. For parallel routing of cables, lines and hoses. The head of the tie can be moved into the optimal bundle position. Easy assembly, no tools required. For 5 mm welding bolts and M5 threaded bolts. The fastening base is often used to secure cables, pipes and hoses in automobile and truck construction. It is simply pushed onto a bolt with a diameter of 5 mm.
Sales unit: 500 pieces
Lieske Part No.: 351890

2-part cable tie with EdgeClip, pre-assembled. The head of the tie can be moved to the optimal bundle position. Type EC9, EC10, EC21 and EC22 for bundle diameters from 1 mm. For edges of 1 - 3 mm. Elements from the EdgeClip series are a very good alternative wherever holes and weld studs cannot be drilled and adhesives cannot be used due to higher temperatures. The EdgeClip family is used for bundling and fastening cable harnesses and hoses, primarily in the automotive, construction and electrical industries, as well as in cable harness production.
Sales unit: 500 pieces
Lieske Part No.: 140314

Type: T30REC4B PA66HS,PA66HIRHS BK 500 ST
Sales unit: 500 pc
Sales unit: 500 pieces
Lieske Part No.: 288758

Type: T30REC4A PA66HS, PA66HIRHS BK ST 500 item: 500 ST.
Sales unit: 500 pieces
Lieske Part No.: 365766

2-part cable tie with EdgeClip, pre-assembled. The head of the tie can be moved to the optimal bundle position. Type EC9, EC10, EC21 and EC22 for bundle diameters from 1 mm. For edges of 1 - 3 mm. Elements from the EdgeClip series are a very good alternative wherever holes and weld studs cannot be drilled and adhesives cannot be used due to higher temperatures. The EdgeClip family is used for bundling and fastening cable harnesses and hoses, primarily in the automotive, construction and electrical industries, as well as in cable harness production.
Sales unit: 500 pieces
Lieske Part No.: 2054013

Sales Unit: 500 ST.
Sales unit: 500 pieces
Lieske Part No.: 757987

2-part cable tie with EdgeClip, pre-assembled. The head of the tie can be moved to the optimal bundle position. Type EC9, EC10, EC21 and EC22 for bundle diameters from 1 mm. For edges of 1 - 3 mm. Elements from the EdgeClip series are a very good alternative wherever holes and weld studs cannot be drilled and adhesives cannot be used due to higher temperatures. The EdgeClip family is used for bundling and fastening cable harnesses and hoses, primarily in the automotive, construction and electrical industries, as well as in cable harness production.
Sales unit: 500 pieces
Lieske Part No.: 183758

2-part cable tie with slatted base, pre-assembled. The head of the tie can be moved to the optimal bundle position. Easy assembly, no tools required. Protects against dirt and dust penetration through plates. Various sheet thicknesses can be used with a single slatted base part. Also for blind holes with thread. These fastening ties are used wherever efficient work combined with high holding forces is required. They can be used in control cabinet and vehicle construction, for example.
Sales unit: 500 pieces
Lieske Part No.: 1232045

Type: T50RFT6-MC5-BK-D1
Sales unit: 500 pc
Sales unit: 500 pieces
Lieske Part No.: 873934

2-part cable tie with slatted base, pre-assembled. The head of the tie can be moved to the optimal bundle position. Easy assembly, no tools required. Protects against dirt and dust penetration through plates. Various sheet thicknesses can be used with a single slatted base part. Also for blind holes with thread. These fastening ties are used wherever efficient work combined with high holding forces is required. They can be used in control cabinet and vehicle construction, for example.
Sales unit: 500 pieces
Lieske Part No.: 1314990

Quantity: 500 ST.
Sales unit: 500 pieces
Lieske Part No.: 969211

Easy installation, no tools required. Expansion anchors lock into place with an audible and tangible click. High pull-out and holding force, even when subjected to loads from different directions. Plates protect against dirt and dust penetration. KSFT variants with rounded expansion anchors for minimized installation height. The T50SST5 variant offers support against axial displacement. Fastening ties with expansion anchors are used to securely bundle and fasten cable harnesses and hoses in control cabinet construction, the automotive industry and the aerospace industry. This fastening solution is used to secure cable harnesses. We offer a variety of plate thicknesses and hole sizes for every application.
Sales unit: 500 pieces
Lieske Part No.: 2092998

Type: BMS-100
Sales unit: 1 pc
Lieske Part No.: 140455

Type: SAC1 ST WH 100 ST
Sales unit: 100 pc
Sales unit: 100 pieces
Lieske Part No.: 248424

Type: LKCRF1 PA66 BK 500 ST item: ST 13000.
Sales unit: 13000 pieces
Lieske Part No.: 428642

Design enables secure form-fitting to the bundled goods. Conventional cable clamps can be replaced. Stocking different clamp sizes is no longer necessary. For heavy-duty cable ties up to 13.5 mm wide. Bundles can be maintained by simply replacing cable ties. Developed for the automotive and truck industries, Heavy Duty Mounts (HDM) are used wherever robust, secure and permanent bundling is required. Rail vehicle construction and the defense and agricultural industries are also focus markets.
Sales unit: 100 pieces
Lieske Part No.: 1131197

Clamps that are pushed onto an edge. Reopenable fastening elements with EdgeClip. Also for subsequent installation. Low-vibration guidance of even larger pipes and cables. Can be closed with one hand, noticeable locking. The covers can be opened for maintenance or subsequent installation. EC27 also secures smaller bundles rattling-free using a spring. EdgeClips are used in the automotive and electrical industries when holes cannot be drilled or no other fastening points are available.
Sales unit: 500 pieces
Lieske Part No.: 2058362

Screwable mounting base. Easy installation using standard screws. Particularly suitable for secure hold in the event of vibrations. The cable tie can be looped in from four sides for quick and flexible installation. The main areas of application are in control cabinet construction, in industrial series production and in areas where the large base plate must ensure stable fastening.
Sales unit: 100 pieces
Lieske Part No.: 2057130

Self-adhesive mounting base. Synthetic rubber adhesive for universal applications. Largest possible adhesive surface. 4-way looping direction of the cable ties for quick and flexible assembly. The main areas of application for the self-adhesive TY-ITS bases are in control cabinet construction, in industrial series production and in areas where the large base plate must ensure stable fastening, but screw fastening is not possible.
Sales unit: 12000 pieces
Lieske Part No.: 2056978

Self-adhesive mounting base. Synthetic rubber adhesive for universal applications. Largest possible adhesive surface. 4-way looping direction of the cable tie for quick and flexible installation. Can also be fixed quickly and easily with a screw. The main areas of application for the self-adhesive TY-ITS bases are in control cabinet construction, in industrial series production and in areas where the large base plate must ensure stable fastening, but screw fastening is not possible.
Sales unit: 200 pieces
Lieske Part No.: 2056979

Fast and easy fixing with a screw. The main areas of application for the self-adhesive TY-ITS bases are in control cabinet construction, in industrial series production and in areas where the large base plate must ensure stable fastening, but screw fastening is not possible.
Sales unit: 6000 pieces
Lieske Part No.: 2056980

EdgeClips can be installed by simply sliding them on. The integrated metal clip holds the clip firmly on the edge. The metal clip is made of specially coated spring steel. If neither drilling nor adhesive can be used.
Sales unit: 500 pieces
Lieske Part No.: 2058363

Design enables secure form-fitting to the bundled goods. Conventional cable clamps can be replaced. Stocking different clamp sizes is no longer necessary. For heavy-duty cable ties up to 13.5 mm wide. Bundles can be maintained by simply replacing cable ties. Developed for the automotive and truck industries, Heavy Duty Mounts (HDM) are used wherever robust, secure and permanent bundling is required. Rail vehicle construction and the defense and agricultural industries are also focus markets.
Lieske Part No.: 1346802

EdgeClips can be installed by simply sliding them on. The integrated metal clip holds the clip firmly on the edge. The metal clip is made of specially coated spring steel. If neither drilling nor adhesive can be used.
Sales unit: 1000 pieces
Lieske Part No.: 2058364

For parallel guidance of two bundles that can be rotated 360° relative to each other. The H-design ensures a good form fit to the bundled goods. The head of the tie can be brought into the optimal bundle position. For cable ties up to 12.7 mm wide. Also for subsequent assembly of bundled goods. These elements were developed for the automotive and truck industries, but can be used in any area where a connection of two bundles and a defined distance are required.
Lieske Part No.: 2058192

Quantity: 10000 ST.
Sales unit: 100 pieces
Lieske Part No.: 960496

Curved design for additional cable protection. Easy installation using a screw or bolt. High security, especially in areas with high vibration. Various sizes and materials available. Specially designed for securing heavy cable bundles, these mounting bases can be used in many industries from agriculture to truck manufacturing. They offer a very secure fastening and can be used in combination with cable ties up to 8.3 mm wide.
Sales unit: 100 pieces
Lieske Part No.: 1133119

Easy installation, no tools required. Protects against dirt and dust penetration through plates. Defined bundle diameter. For subsequent installation of bundled goods. This fastening element enables flexible processing of cables and hoses. The bundled goods are simply pressed into the clip and held there by slats. It is possible to accommodate several cables and add cables later. The clip also allows radial twisting of the bundled goods.
Sales unit: 5000 pieces
Lieske Part No.: 2058365

Compact, flat design. Suitable for applications with minimal space. Can be combined with cable ties up to 5 mm wide. 4-way looping direction for use in line or at a 90° angle. CTAM sockets made of PEEK are used in applications where special material properties are required. On the one hand, these sockets can be installed in areas with high continuous temperatures of up to + 240 °C, e.g. for attachments to the exhaust system or in the engine compartment. In the semiconductor industry, products made of PEEK are used in test laboratories, among other things, to minimize the influence of external gases. Due to the good resistance to radiation, the sockets are suitable for use in medical technology/X-ray technology. The good resistance to acids and other chemicals speaks for use in the chemical industry. CTAM sockets can be an excellent replacement for previous metal solutions.
Sales unit: 100 pieces
Lieske Part No.: 982322

Sales Unit: 100 ST.
Sales unit: 5000 pieces
Lieske Part No.: 948700

The combination of base and cable tie means that a wide range of different clamp diameters can be replaced. Cable ties can be looped in from two sides. Made from stainless steel grade SS316 (V4A). Excellent chemical and temperature resistance. Quick and easy processing. Robust and permanent fixation of all types of bundles. The P-Mount stainless steel bases are suitable for reliable fastening of cables, hoses, protective pipes and pipelines in extreme environments. In combination with stainless steel cable ties from the MBT-S and MBT-H series, they offer a system solution in the areas of shipbuilding, oil and gas production, industrial machinery and vehicles as well as in the food industry and energy supply including renewable energies.
Sales unit: 100 pieces
Lieske Part No.: 1135080

The combination of base and cable tie means that a wide range of different clamp diameters can be replaced. Cable ties can be looped in from two sides. Made from stainless steel grade SS316 (V4A). Excellent chemical and temperature resistance. Quick and easy processing. Robust and permanent fixation of all types of bundles. The stainless steel bases of the SSPC series, in combination with stainless steel cable ties, enable reliable fastening of cables, hoses, protective pipes and pipelines in extreme environments. The bases can be used with metal cable ties up to a width of 10 mm. A first-class system solution for shipbuilding, oil and gas production, industrial machinery and vehicles, as well as for the food industry and energy supply.
Sales unit: 100 pieces
Lieske Part No.: 1135079

Sales Unit: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 172140

Sales unit: 56000 pieces
Lieske Part No.: 2057131

Striking blue for easy visual recognition. Compact design with a slight curvature. Offers a secure hold for the bundled goods. Can be detected by metal devices (result depends on the respective application). Easy installation using a screw. Can be combined with MCT / MCTS cable ties. Particularly suitable for a secure hold in the event of vibrations. Greatly reduced risk of contamination (e.g. of food). Can be used as part of the HACCP process*. MCKR bases in a curved design are used wherever cables and lines with a larger diameter need to be attached. Even in applications with high vibrations, such as production and packaging systems within the food industry, these bases offer a secure hold for the bundled goods.
Sales unit: 100 pieces
Lieske Part No.: 1131194

Striking blue for easy visual recognition. Compact, flat design. Detectable via metal devices (result depends on the respective application). 4-way looping direction for quick and flexible installation. Even individual pieces can be detected due to the homogeneous distribution of the metal particles. Greatly reduced risk of contamination (e.g. of food). Can be used as part of the HACCP process*. These bases are characterized above all by their compact and flat design and are an ideal addition to our MCTS cable ties. The homogeneously distributed metal components make the product optimally detectable and therefore predestined for use in the food and pharmaceutical industries. With the MCCTAM bases, the cable tie can be looped in all 4 directions, which means that the bundle can run in two directions.
Sales unit: 100 pieces
Lieske Part No.: 2058366

Clearly defined cable routing with up to three bundles. Simple fastening using welded bolts. Inner bore M8 and outer diameter 15 mm, 8 mm recess. Maximum bundle protection thanks to smooth surface. Weight reduction compared to a metal holder. Thermal, electrical and vibration decoupling. Made of glass fiber reinforced plastic, corrosion-free. Maintenance of the bundled goods possible by simply replacing the cable ties. This 3-way spacer for fastening ties was developed to guide up to 3 bundles safely.
Sales unit: 500 pieces
Lieske Part No.: 468064

Striking blue for easy visual recognition. Compact design with a slight curvature. Offers a secure hold for the bundled goods. Can be detected by metal devices (result depends on the respective application). Easy installation using a screw. Can be combined with MCT / MCTS cable ties. Particularly suitable for a secure hold in the event of vibrations. Greatly reduced risk of contamination (e.g. of food). Can be used as part of the HACCP process*. MCKR bases in a curved design are used wherever cables and lines with a larger diameter need to be attached. Even in applications with high vibrations, such as production and packaging systems within the food industry, these bases offer a secure hold for the bundled goods. They can be combined with cable ties up to 8.3 mm wide.
Sales unit: 100 pieces
Lieske Part No.: 149650

Clearly defined cable routing with up to three bundles. Easy fastening using an M8 screw. Maximum bundle protection thanks to a smooth surface. Weight reduction compared to a metal holder. Thermal, electrical and vibration decoupling. Made of glass fiber reinforced plastic, corrosion-free. Maintenance of the bundled goods possible by simply replacing the cable ties. This 3-way spacer for fastening ties was developed to guide up to 3 bundles safely.
Sales unit: 500 pieces
Lieske Part No.: 2058367

Striking blue for easy visual recognition. The cable tie can be looped in from four sides for quick and flexible installation. Can be detected by metal devices (result depends on the respective application and equipment). Even individual pieces can be detected due to a homogeneous distribution of the metal particles. Greatly reduced risk of food contamination. Can support quality assurance in food production, for example within the framework of HACCP. MCMB bases are the ideal addition to our MCT cable ties. They are used wherever cables and lines need to be securely fastened or cable bundles need to be laid. Even in environments with high vibrations, such as in food production and automated packaging machines, these mounting bases are an optimal solution.
Sales unit: 100 pieces
Lieske Part No.: 2058368

Striking blue for easy visual recognition. The cable tie can be looped in from four sides for quick and flexible installation. Can be detected by metal devices (result depends on the respective application and equipment). Even individual pieces can be detected due to a homogeneous distribution of the metal particles. Greatly reduced risk of food contamination. Can support quality assurance in food production, for example within the framework of HACCP. MCMB bases are the ideal addition to our MCT cable ties. They are used wherever cables and lines need to be securely fastened or cable bundles need to be laid. Even in environments with high vibrations, such as in food production and automated packaging machines, these mounting bases are an optimal solution.
Sales unit: 100 pieces
Lieske Part No.: 2058369

Suitable for use with cable ties from HellermannTyton (max. width of 7.9 mm). Made of durable TPU - also suitable for applications in salt water conditions. Flexible, contactless data communication. Clear identification of objects through unique numbering. Faster data management compared to paper solutions. More precise documentation processes - preventing human errors. Robust and resistant in harsh environments and against cleaning processes. High frequency (HF/13.56 MHz). Rewritable. Yellow as a signal color for better findability. RFID products offer an innovative solution for clear and fast product identification. The CRADLE with an integrated transponder is used on standard cable ties. Areas of application for RFID products include securing, serializing, tracking and identifying products in the areas of asset management, electrical testing, inventory, rental and leasing services as well as maintenance and repair.
Sales unit: 100 pieces
Lieske Part No.: 1142300

Suitable for bundle diameters from 19.4 mm up to 36.0 mm. One-piece ratchet closure enables uncomplicated installation during pre- and final assembly. A wide range of configuration options cover a wide range of diameters and applications. Stock levels can be reduced. The clamp holder guides and centers the bundle, preventing crushing. Uncomplicated release function for quick adjustment and simplified maintenance. Impact-modified, heat- and UV-stabilized PA66. Long durability indoors and outdoors. Integrated steel mounting plate tolerates assembly with high torque. The fastening plate is chemical and salt spray resistant. Special inserts made of soft material are available for sensitive bundled goods. Separate tightening aid enables defined contact pressure using a hand tool (EVO series). The Ratchet P-Clamp product family offers a high degree of flexibility when guiding and fastening cables, pipes or lines. Their robust design and durable materials make them ideal for heavy-duty applications indoors and outdoors. The one-piece fastening clamp is closed by hand to the desired diameter. The release function allows the bundle to be removed easily and non-destructively using a simple flat-head screwdriver. The clamp can be reused without having to change its position.
Sales unit: 160 pieces
Lieske Part No.: 2048044

Suitable for bundle diameters from 19.4 mm up to 36.0 mm. One-piece ratchet closure enables uncomplicated installation during pre- and final assembly. A wide range of configuration options cover a wide range of diameters and applications. Stock levels can be reduced. The clamp holder guides and centers the bundle, preventing crushing. Uncomplicated release function for quick adjustment and simplified maintenance. Impact-modified, heat- and UV-stabilized PA66. Long durability indoors and outdoors. Integrated steel mounting plate tolerates assembly with high torque. The fastening plate is chemical and salt spray resistant. Special inserts made of soft material are available for sensitive bundled goods. Separate tightening aid enables defined contact pressure using a hand tool (EVO series). The Ratchet P-Clamp product family offers a high degree of flexibility when guiding and fastening cables, pipes or lines. Their robust design and durable materials make them ideal for heavy-duty applications indoors and outdoors. The one-piece fastening clamp is closed by hand to the desired diameter. The release function allows the bundle to be removed easily and non-destructively using a simple flat-head screwdriver. The clamp can be reused without having to change its position.
Sales unit: 160 pieces
Lieske Part No.: 2048218

Suitable for bundle diameters from 35.1 mm up to 51.0 mm. One-piece ratchet closure enables uncomplicated installation during pre- and final assembly. A wide range of configuration options cover a wide range of diameters and applications. Stock levels can be reduced. The clamp holder guides and centers the bundle, preventing crushing. Uncomplicated release function for quick adjustment and simplified maintenance. Impact-modified, heat- and UV-stabilized PA66. Long durability indoors and outdoors. Integrated steel mounting plate tolerates assembly with high torque. The fastening plate is chemical and salt spray resistant. Special inserts made of soft material are available for sensitive bundled goods. Separate tightening aid enables defined contact pressure using a hand tool (EVO series). The Ratchet P-Clamp product family offers a high degree of flexibility when guiding and fastening cables, pipes or lines. Their robust design and durable materials make them ideal for heavy-duty applications indoors and outdoors. The one-piece fastening clamp is closed by hand to the desired diameter. The release function allows the bundle to be removed easily and non-destructively using a simple flat-head screwdriver. The clamp can be reused without having to change its position.
Sales unit: 160 pieces
Lieske Part No.: 2048045

Tightening aid for defined contact pressure. The tightening aid can be used with the help of the EVO series. Soft clamp inserts provide additional protection for the bundled goods. In addition to the Ratchet P-Clamp cable clamps, various accessories are available. The tightening aid enables a defined contact pressure using a hand tool from the EVO series and ensures a high level of process reliability. For sensitive bundled goods, special inserts made of soft material are available for each clamp size. The inserts also provide additional protection in applications with strong vibrations.
Sales unit: 100 pieces
Lieske Part No.: 2048229

Ratchet P-Clamp A-Series for bundle diameters from 6.2 mm to 13.7 mm. One-piece ratchet lock design allows easy installation during pre- or final assembly. Multiple configurations for a wide range of diameters and applications, reducing parts inventory. The interior of the clamp is designed to guide and center the bundle to avoid pinching. Easy release allows for quick adjustments and maintenance. Impact-resistant, heat- and UV-stabilized PA66 ensures long durability indoors and outdoors. The steel mounting plate can withstand high torques and is treated against chemicals and salt spray. The Ratchet P-Clamp product family offers high flexibility when guiding and fastening cables, pipes or lines. Its robust design and durable materials make it ideal for heavy-duty applications indoors and outdoors. The one-piece fastening clamp is closed by hand to the desired diameter. The release function allows the bundle to be removed easily and non-destructively using a simple flat-head screwdriver. The clamp can be reused without having to change its position.
Sales unit: 300 pieces
Lieske Part No.: 2048217