Cable Ties in Fixing hardware

Type: CTM3-PA66-WH-C1 item: 5000 ST.
Sales unit: 7000 pieces
Lieske Part No.: 565588

Curved design for additional cable protection. Easy installation using a screw or bolt. High security, especially in areas with high vibration. Various sizes and materials available. Specially designed for securing heavy cable bundles, these mounting bases can be used in many industries from agriculture to truck manufacturing. They offer a very secure fastening and can be used in combination with cable ties up to 8.3 mm wide.
Sales unit: 10000 pieces
Lieske Part No.: 1131361

These bases are used wherever cables and wires with larger diameters need to be attached, e.g. B. in agricultural machinery or truck construction. They can be combined with cable ties up to 8.3 mm wide. Sales unit: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 1131360

Compact, flat design. Suitable for applications with minimal space. Can be combined with cable ties up to 5 mm wide. 4-way looping direction for use in line or at a 90° angle. Due to their small dimensions, the robust CTAM bases with 4-way cable tie holder are particularly suitable for limited space, e.g. in telecommunications, in control cabinets and in equipment or plant construction.
Sales unit: 100 pieces
Lieske Part No.: 2048842

Compact, flat design. Suitable for applications with minimal space. Can be combined with cable ties up to 5 mm wide. 4-way looping direction for use in line or at a 90° angle. Due to their small dimensions, the robust CTAM bases with 4-way cable tie holder are particularly suitable for limited space, e.g. in telecommunications, in control cabinets and in equipment or plant construction.
Sales unit: 100 pieces
Lieske Part No.: 1596655

Type: CTAM2-PA66-NA-C1 item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 297584

For applications with tight installation situations. Secure fastening using the expansion anchor. The TM1SF fastening element is used to hold a cable tie in tight spaces. It is used wherever a simple and quick fastening is required.
Sales unit: 100 pieces
Lieske Part No.: 350796

Screwable mounting bases. Bundled goods to the side for screwing. Compact design. Can be combined with cable ties up to 4.6 mm wide. Secure hold even with larger bundle diameters. Due to the lateral guidance of the cable and line bundle, these bases are ideal for installation in tight spaces, especially for fastening in corners and on edges, as the hole can be offset by a few millimeters.
Sales unit: 500 pieces
Lieske Part No.: 970743

Screwable mounting bases. Bundled goods to the side for screwing. Compact design. Can be combined with cable ties up to 4.6 mm wide. Secure hold even with larger bundle diameters. Due to the lateral routing of the cable and line bundle, these bases are ideal for installation in tight spaces. Particularly for fastening in corners and on edges, as the hole can be offset by a few millimeters.
Sales unit: 500 pieces
Lieske Part No.: 567364

Screwable mounting bases. Bundled goods to the side for screwing. Compact design. Can be combined with cable ties up to 4.6 mm wide. Secure hold even with larger bundle diameters. Due to the lateral routing of the cable and line bundle, these bases are ideal for installation in tight spaces. Particularly for fastening in corners and on edges, as the hole can be offset by a few millimeters.
Sales unit: 500 pieces
Lieske Part No.: 426612

For single or multiple cables. Simply place cables in the square holder. Lockable to prevent accidental removal. Expansion anchors for easy and safe installation. The WPC holders are used in many industrial areas, including in the frame profiles of control cabinets or inside household appliances, where they can be installed without losing space.
Lieske Part No.: 2054886

For single or multiple cables. Simply place cables in the square holder. Lockable to prevent accidental removal. Expansion anchors for easy and safe installation. The WPC holders are used in many industrial areas, including in the frame profiles of control cabinets or inside household appliances, where they can be installed without losing space.
Sales unit: 500 pieces
Lieske Part No.: 2054884

For single or multiple cables. Simply place cables in the square holder. Lockable to prevent accidental removal. Expansion anchors for easy and safe installation. The WPC holders are used in many industrial areas, including in the frame profiles of control cabinets or inside household appliances, where they can be installed without losing space.
Sales unit: 500 pieces
Lieske Part No.: 818186

For single or multiple cables. Simply place cables in the square holder. Lockable to prevent accidental removal. Expansion anchors for easy and safe installation. The WPC holders are used in many industrial areas, including in the frame profiles of control cabinets or inside household appliances, where they can be installed without losing space.
Sales unit: 500 pieces
Lieske Part No.: 2054885

Ideal for routing cable bundles in parallel. For cable ties up to 9 mm wide. The LOK04 ring offers an easy way to bundle cables and lines and route them in parallel at the same time.
Sales unit: 20000 pieces
Lieske Part No.: 2058193

Type: LOK01B PA6HIR BK 100 ST
Sales unit: 9000 pc
Sales unit: 100 pieces
Lieske Part No.: 478333

Type: TY5K2 PA66HS NA 100 ST sales unit: 1 unit.
Lieske Part No.: 586606

Time-saving fastening solution. Base consists of two parts. Simply push into the fastening hole. Can be combined with cable ties of different widths. The TY5 wedge bases are used wherever efficient fastening and high fastening security are required, even under vibrations. The two-part wedge remains firmly anchored in the drill hole after insertion.
Sales unit: 100 pieces
Lieske Part No.: 940230

Type: TY5K3 PA66W BK 100 ST sales unit: 1 ST.
Sales unit: 2000 pieces
Lieske Part No.: 646455

The head of the divider takes up a defined position when assembled. Easy assembly, no tools required. Bundled goods run at a defined distance from the surface directly above the welding stud. Primarily developed for the automotive industry, these welding stud holders are also used in all other areas where cables and lines need to be safely guided using welding or threaded studs.
Sales unit: 500 pieces
Lieske Part No.: 455249

2-part cable tie with EdgeClip, pre-assembled. The head of the tie can be moved to the optimal bundle position. Type EC9, EC10, EC21 and EC22 for bundle diameters from 1 mm. For edges of 1-3 mm. Elements from the EdgeClip series are a very good alternative wherever holes and weld studs cannot be drilled and adhesives cannot be used due to higher temperatures. The EdgeClip series is used for bundling and fastening cable harnesses and hoses, mainly in the automotive, construction and electrical industries, as well as in cable harness production.
Sales unit: 500 pieces
Lieske Part No.: 2058132

Pre-assembled two-part fastening ties with EdgeClip. The head of the cable tie can still be moved after fastening. For the smallest bundle diameters from 1 mm. For edges of 3 - 6 mm. The combination of cable ties and EdgeClip is suitable wherever holes cannot be drilled or where bonding fails due to high temperatures. These solutions are widely used for fastening and bundling cables, lines and pipes, e.g. in the automotive, construction and electrical industries as well as in cable harness production.
Sales unit: 500 pieces
Lieske Part No.: 325608

Type: T50ROSEC24 PA66HS,PA66HIRHS BK 500 ST
Sales unit: 3000 pc
Sales unit: 500 pieces
Lieske Part No.: 842027

2-part cable tie with EdgeClip, pre-assembled. The head of the tie can be moved to the optimal bundle position. Type EC9, EC10, EC21 and EC22 for bundle diameters from 1 mm. For edges of 1-3 mm. Elements from the EdgeClip series are a very good alternative wherever holes and weld studs cannot be drilled and adhesives cannot be used due to higher temperatures. The EdgeClip series is used for bundling and fastening cable harnesses and hoses, mainly in the automotive, construction and electrical industries, as well as in cable harness production.
Sales unit: 500 pieces
Lieske Part No.: 446943

2-part cable tie with EdgeClip, pre-assembled. The head of the tie can be moved to the optimal bundle position. Type EC9, EC10, EC21 and EC22 for bundle diameters from 1 mm. For edges of 1-3 mm. Elements from the EdgeClip series are a very good alternative wherever holes and weld studs cannot be drilled and adhesives cannot be used due to higher temperatures. The EdgeClip series is used for bundling and fastening cable harnesses and hoses, mainly in the automotive, construction and electrical industries, as well as in cable harness production.
Sales unit: 500 pieces
Lieske Part No.: 1216592

Quantity: 4000 ST.
Sales unit: 500 pieces
Lieske Part No.: 438109

Type: T50SOSEC21 PA66HS, PA66HIRHS BK 500 ST Package: 4000 ST.
Sales unit: 500 pieces
Lieske Part No.: 127229

2-part cable tie with EdgeClip, pre-assembled. The head of the tie can be moved to the optimal bundle position. Type EC9, EC10, EC21 and EC22 for bundle diameters from 1 mm. For edges of 1 - 3 mm. Elements from the EdgeClip series are a very good alternative wherever holes and weld studs cannot be drilled and adhesives cannot be used due to higher temperatures. The EdgeClip family is used for bundling and fastening cable harnesses and hoses, primarily in the automotive, construction and electrical industries, as well as in cable harness production.
Sales unit: 500 pieces
Lieske Part No.: 2055564

Type: T50ROSEC20-MC5-BK-D1
Sales unit: 500 pc
Sales unit: 500 pieces
Lieske Part No.: 466192

2-part cable tie with slatted base, pre-assembled. The head of the tie can be moved to the optimal bundle position. Easy assembly, no tools required. Protects against dirt and dust penetration through plates. Various sheet thicknesses can be used with a single slatted base part. Also for blind holes with threads. The tie was developed primarily for fastening cable harnesses in the automotive industry. Due to its simple and user-friendly application, the fastening tie is also used in other industries, e.g. in aviation, switchgear and in the manufacture of household appliances.
Sales unit: 500 pieces
Lieske Part No.: 2058135

2-part cable tie with EdgeClip, pre-assembled. Easy assembly, no tools required. The head of the tie can be moved to the optimal bundling position. For edges of 1 - 2.5 mm or 1 - 3 mm. Rotatable cable tie for flexible cable routing. This combination of cable tie and Edge Clip is suitable wherever holes cannot be drilled or where an adhesive fails due to high temperatures. These solutions are widely used for fastening and bundling cables, lines and pipes, e.g. in the automotive, construction and electrical industries as well as in cable harness production.
Sales unit: 500 pieces
Lieske Part No.: 2048215

2-part cable tie with slatted base, pre-assembled. The head of the tie can be moved to the optimal bundle position. Easy assembly, no tools required. Protects against dirt and dust penetration through plates. Various sheet thicknesses can be used with a single slatted base part. Also for blind holes with thread. These fastening ties are used wherever efficient work combined with high holding forces is required. They can be used in control cabinet and vehicle construction, for example.
Sales unit: 500 pieces
Lieske Part No.: 1216590

2-part cable tie with slatted base, pre-assembled. The head of the tie can be moved to the optimal bundle position. Easy assembly, no tools required. Protects against dirt and dust penetration through plates. Various sheet thicknesses can be used with a single slatted base part. Also for blind holes with thread. These fastening ties are used wherever efficient work combined with high holding forces is required. They can be used in control cabinet and vehicle construction, for example.
Sales unit: 500 pieces
Lieske Part No.: 2058139

Fastening tie. 2-part with hose holder. Rotatable 360°. This internally toothed fastening tie makes it possible to attach the hose or cable to an existing cable harness. This product can be freely rotated 360° and can be installed flexibly.
Sales unit: 500 pieces
Lieske Part No.: 2058140

2-part cable tie with slatted base, pre-assembled. The head of the tie can be moved to the optimal bundle position. Easy assembly, no tools required. Protects against dirt and dust penetration through plates. Various sheet thicknesses can be used with a single slatted base part. Also for blind holes with thread. These fastening ties are used wherever efficient work combined with high holding forces is required. They can be used in control cabinet and vehicle construction, for example.
Sales unit: 500 pieces
Lieske Part No.: 2058141

Fastening ties. 2-part with hose holder. Rotatable 360°. These internally toothed fastening straps offer the option of attaching a wire or hose to an existing wiring harness. With a full 360-degree rotation, the hose or cable can be oriented in any direction in relation to the main wiring harness.
Sales unit: 6000 pieces
Lieske Part No.: 2058145

2-part cable tie with slatted base, pre-assembled. The head of the tie can be moved to the optimal bundle position. Easy assembly, no tools required. Protects against dirt and dust penetration through plates. Various sheet thicknesses can be used with a single slatted base part. Also for blind holes with thread. These fastening ties are used wherever efficient work combined with high holding forces is required. They can be used in control cabinet and vehicle construction, for example.
Sales unit: 100 pieces
Lieske Part No.: 1565692

2-part cable tie with EdgeClip, pre-assembled. Easy assembly, no tools required. The head of the cable tie can be moved to the optimal bundling position. For edges of 1 - 2.5 mm or 1 - 3 mm. Rotatable cable tie for flexible cable routing. This combination of cable tie and Edge Clip is suitable wherever holes cannot be drilled or where an adhesive fails due to high temperatures. These solutions are widely used for fastening and bundling cables, lines and pipes, e.g. in the automotive, construction and electrical industries as well as in cable harness production.
Sales unit: 1000 pieces
Lieske Part No.: 2058136

2-part cable tie with coupler, pre-assembled. The head of the tie can be brought into the optimal bundle position. Also suitable for subsequent assembly of bundled goods. For parallel guidance of two bundles that can be rotated 90° to each other. The coupler is a connector for up to two cable ties that enables parallel cable routing. The cable tie holder is designed so that each cable tie can be flexibly rotated 90°. This ensures a high level of flexibility during subsequent assembly. The connector can be fitted with one or two cable ties. The coupler also enables subsequent assembly of bundles.
Sales unit: 500 pieces
Lieske Part No.: 2049028

2-part cable tie with slatted base, pre-assembled. The head of the tie can be moved to the optimal bundle position. Easy assembly, no tools required. Protects against dirt and dust penetration through plates. Various sheet thicknesses can be used with a single slatted base part. Also for blind holes with threads. The tie was developed primarily for fastening cable harnesses in the automotive industry. Due to its simple and user-friendly application, the fastening tie is also used in other industries, e.g. in aviation, switchgear and in the manufacture of household appliances.
Sales unit: 500 pieces
Lieske Part No.: 2058146

2-part cable tie with EdgeClip, pre-assembled. The head of the tie can be moved to the optimal bundle position. Type EC9, EC10, EC21 and EC22 for bundle diameters from 1 mm. For edges of 1 - 3 mm. Elements from the EdgeClip series are a very good alternative wherever holes and weld studs cannot be drilled and adhesives cannot be used due to higher temperatures. The EdgeClip family is used for bundling and fastening cable harnesses and hoses, primarily in the automotive, construction and electrical industries, as well as in cable harness production.
Sales unit: 500 pieces
Lieske Part No.: 1237633

2-part cable tie with EdgeClip, pre-assembled. The head of the tie can be moved to the optimal bundle position. Type EC9, EC10, EC21 and EC22 for bundle diameters from 1 mm. For edges of 1-3 mm. Elements from the EdgeClip series are a very good alternative wherever holes and weld studs cannot be drilled and adhesives cannot be used due to higher temperatures. The EdgeClip series is used for bundling and fastening cable harnesses and hoses, mainly in the automotive, construction and electrical industries, as well as in cable harness production.
Sales unit: 500 pieces
Lieske Part No.: 2048214

2-part cable tie with base part, pre-assembled. The head of the tie can be brought into the optimal bundle position. Perfect form fit on the bundled goods thanks to the H-design. Very robust design. Good alternative to metal clamps. Withstands vibrations and displacement forces. High tightening torque thanks to the metal bushing. Heavy-duty mounts are used by automobile and truck manufacturers, particularly on engine wiring harnesses. These parts are also used in other areas with difficult requirements.
Sales unit: 50 pieces
Lieske Part No.: 2058370

2-part cable tie with blind hole clamp, pre-assembled. High extraction forces due to the all-round metal clamp. The head of the tie can be brought into the optimal bundle position. Easy assembly, no tools required. Plate protects against the ingress of dirt and dust. Suitable for blind holes with or without threads. These fastening ties are used wherever efficient work combined with high holding forces is required. Thanks to the all-round metal clamp, the blind hole clamp can be used for blind holes with and without threads. They are used in vehicle construction, shipbuilding and renewable energies.
Sales unit: 500 pieces
Lieske Part No.: 2058137

Rustproof stainless steel cable ties (316), equipped with RFID transponders. Particularly suitable for applications in harsh environments. With patented, non-removable locking head. Flexible, contactless data communication. Clear identification of objects through unique numbering. Faster data management compared to paper solutions. More precise documentation processes - prevention of human errors. Available as high frequency (HF/13.56 MHz) version and ultra high frequency (UHF/869 MHz) version. Rewritable. Signal color red as standard for better findability, black coating on request. RFID cable ties offer an innovative solution for clear and quick product identification. The cable ties made of stainless steel type 316 are equipped with a transponder and are ideal for all areas with high demands on holding power and durability in adverse environments. The numerous advantages of a cable tie are combined with RFID technology. This labeling solution is used primarily for securing, serializing, tracking and identifying products in the areas of asset management, electrical testing, inventory, rental and leasing services as well as maintenance and repair.
Sales unit: 50 pieces
Lieske Part No.: 1142227

2-part cable tie with blind hole clamp, pre-assembled. High extraction forces due to the all-round metal clamp. The head of the tie can be brought into the optimal bundle position. Easy assembly, no tools required. Plate protects against the ingress of dirt and dust. Suitable for blind holes with or without threads. These fastening ties are used wherever efficient work combined with high holding forces is required. Thanks to the all-round metal clamp, the blind hole clamp can be used for blind holes with and without threads. They are used in vehicle construction, shipbuilding and renewable energies.
Sales unit: 1000 pieces
Lieske Part No.: 2058138

Spring steel clamp with interlocking claws. For thin edges 0.5 - 2.5 mm. Small housings for limited installation space. 2-part cable tie with EdgeClip, pre-assembled. The head of the tie can be brought into the optimal bundling position. Elements from the EdgeClip series are a very good alternative wherever holes and weld studs cannot be drilled and adhesives cannot be used due to higher temperatures. The EdgeClip family is used to bundle and attach cable harnesses and hoses, mainly in the automotive industry. These EdgeClips are used where installation space is limited. Possible areas of application in the automotive industry include taillights or mirrors.
Sales unit: 500 pieces
Lieske Part No.: 2058128

Spring steel clamp with interlocking claws. For thin edges 0.5 - 2.5 mm. Small housings for limited installation space. 2-part cable tie with EdgeClip, pre-assembled. The head of the tie can be brought into the optimal bundling position. Elements from the EdgeClip series are a very good alternative wherever holes and weld studs cannot be drilled and adhesives cannot be used due to higher temperatures. The EdgeClip family is used to bundle and attach cable harnesses and hoses, mainly in the automotive industry. These EdgeClips are used where installation space is limited. Possible areas of application in the automotive industry include taillights or mirrors.
Sales unit: 500 pieces
Lieske Part No.: 2058129

2-part cable tie with EdgeClip, pre-assembled. The head of the tie can be brought into the optimal bundle position. For bundle diameters from 1 mm. For edges of 3 - 6 mm. Elements from the EdgeClip series are a very good alternative wherever holes and weld studs cannot be drilled and adhesives cannot be used due to higher temperatures. The EdgeClip family is used for bundling and fastening cable harnesses and hoses, mainly in the automotive industry.
Sales unit: 500 pieces
Lieske Part No.: 2058147

2-part cable tie with EdgeClip, pre-assembled. The head of the tie can be moved to the optimal bundle position. For bundle diameters from 1 mm. For edges of 3 - 6 mm. Elements from the EdgeClip series are a very good alternative wherever holes and weld studs cannot be drilled and adhesives cannot be used due to higher temperatures. The EdgeClip family is used for bundling and fastening cable harnesses and hoses, mainly in the automotive, construction and electrical industries.
Sales unit: 500 pieces
Lieske Part No.: 2058133