Cable Ties in Fixing hardware

Sockel ANP für Kabelbinder SES-QUICK ist ein selbstklebender Sockel zur schnellen Befestigung von leichten Kabeln mittels SES-QUICK Kabelbinder. Dieser Sockel kann zusätzlich noch verschraubt werden. Flammwidrigkeit V2 nach UL94, halogenfre Verkaufseinheit: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 499285

Base ANP for cable ties SES-QUICK is a self-adhesive base for the quick fastening of light cables using SES-QUICK cable ties. This base can also be screwed on. Flame retardancy V2 according to UL94, halogen-free
Sales unit: 100 pieces
Lieske Part No.: 394138

Schraubsockel für Kabelbinder SES-QUICK 4,8mm Breite. Flammwidrigkeit V2 nach UL94, halogenfrei und RoHS-konform. Verkaufseinheit: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 499286

The curved mounting bases of the TM series are made of polyamide 6.6 and are available in natural and black. Cable ties up to 4.7mm and up to 9mm can be used. The temperature range is -40 to +85°C. The
Sales unit: 100 pieces
Lieske Part No.: 455863

The curved mounting bases of the TM series are made of polyamide 6.6 and are available in natural and black. Cable ties up to 4.7mm and up to 9mm can be used. The temperature range is -40 to +85°C. The
Sales unit: 100 pieces
Lieske Part No.: 455913

Base with rivet for SES-QUICK cable ties are inserted into an existing hole and secured with a rivet. This base has flame retardancy V2 according to UL94, is halogen-free and RoHS compliant.
Lieske Part No.: 456298

Base with rivet for SES-QUICK cable ties are inserted into an existing hole and secured with a rivet. This base has flame retardancy V2 according to UL94, is halogen-free and RoHS compliant.
Sales unit: 100 pieces
Lieske Part No.: 456306

Base with rivet for SES-QUICK cable ties are inserted into an existing hole and secured with a rivet. This base has flame retardancy V2 according to UL94, is halogen-free and RoHS compliant.
Sales unit: 100 pieces
Lieske Part No.: 456309

Base with rivet for SES-QUICK cable ties are inserted into an existing hole and secured with a rivet. This base has flame retardancy V2 according to UL94, is halogen-free and RoHS compliant.
Sales unit: 100 pieces
Lieske Part No.: 456345

Base with rivet for SES-QUICK cable ties are inserted into an existing hole and secured with a rivet. This base has flame retardancy V2 according to UL94, is halogen-free and RoHS compliant.
Sales unit: 100 pieces
Lieske Part No.: 456438

Twister cable ties SES-TW are designed for quick installation indoors. The cable harness is placed in the bend and the two ends are twisted together. The Twister cable tie has flame retardancy V2 according to UL94 and is halogen
Sales unit: 100 pieces
Lieske Part No.: 188817

Unsere Kabelbinder SES-QUICK SL sind vielseitig einsetzbar. Unter anderem zur Bündelung und Befestigung von Leitungen, Kabeln, Schläuchen etc.. Die Kabelbinder sind halogenfrei und entsprechen der RoHS-Richtlinie. Flammwidrigkeit V2 nach UL Verkaufseinheit: 1000 ST.
Sales unit: 1000 pieces
Lieske Part No.: 499287

Unsere Kabelbinder SES-QUICK SL sind vielseitig einsetzbar. Unter anderem zur Bündelung und Befestigung von Leitungen, Kabeln, Schläuchen etc.. Die Kabelbinder sind halogenfrei und entsprechen der RoHS-Richtlinie. Flammwidrigkeit V2 nach UL Verkaufseinheit: 1000 ST.
Sales unit: 1000 pieces
Lieske Part No.: 499288

Unsere Kabelbinder SES-QUICK SL sind vielseitig einsetzbar. Unter anderem zur Bündelung und Befestigung von Leitungen, Kabeln, Schläuchen etc.. Die Kabelbinder sind halogenfrei und entsprechen der RoHS-Richtlinie. Flammwidrigkeit V2 nach UL Verkaufseinheit: 1000 ST.
Sales unit: 1000 pieces
Lieske Part No.: 499289

Our SES-QUICK SL cable ties are versatile. They can be used for bundling and fastening wires, cables, hoses, etc. The cable ties are halogen-free and comply with the RoHS directive. Flame retardancy V2 according to UL
Sales unit: 100 pieces
Lieske Part No.: 456466

Unsere Kabelbinder SES-QUICK SL sind vielseitig einsetzbar. Unter anderem zur Bündelung und Befestigung von Leitungen, Kabeln, Schläuchen etc.. Die Kabelbinder sind halogenfrei und entsprechen der RoHS-Richtlinie. Flammwidrigkeit V2 nach UL Verkaufseinheit: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 499290

Unsere Kabelbinder SES-QUICK SL sind vielseitig einsetzbar. Unter anderem zur Bündelung und Befestigung von Leitungen, Kabeln, Schläuchen etc.. Die Kabelbinder sind halogenfrei und entsprechen der RoHS-Richtlinie. Flammwidrigkeit V2 nach UL Verkaufseinheit: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 499292

Unsere Kabelbinder SES-QUICK SL sind vielseitig einsetzbar. Unter anderem zur Bündelung und Befestigung von Leitungen, Kabeln, Schläuchen etc.. Die Kabelbinder sind halogenfrei und entsprechen der RoHS-Richtlinie. Flammwidrigkeit V2 nach UL Verkaufseinheit: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 499295

Unsere Kabelbinder SES-QUICK SL sind vielseitig einsetzbar. Unter anderem zur Bündelung und Befestigung von Leitungen, Kabeln, Schläuchen etc.. Die Kabelbinder sind halogenfrei und entsprechen der RoHS-Richtlinie. Flammwidrigkeit V2 nach UL Verkaufseinheit: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 499296

Unsere Kabelbinder SES-QUICK SL sind vielseitig einsetzbar. Unter anderem zur Bündelung und Befestigung von Leitungen, Kabeln, Schläuchen etc.. Die Kabelbinder sind halogenfrei und entsprechen der RoHS-Richtlinie. Flammwidrigkeit V2 nach UL Verkaufseinheit: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 499297

Unsere Kabelbinder SES-QUICK SL sind vielseitig einsetzbar. Unter anderem zur Bündelung und Befestigung von Leitungen, Kabeln, Schläuchen etc.. Die Kabelbinder sind halogenfrei und entsprechen der RoHS-Richtlinie. Flammwidrigkeit V2 nach UL Verkaufseinheit: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 499299

Unsere Kabelbinder SES-QUICK SL MDE können durch Metallpartikel jederzeit detektiert werden. Die Kabelbinder sind für die Lebensmittel- sowie Pharmaindustrie und HACCP bestens geeignet. Die Kabelbinder sind halogenfrei und entsprechen der R Verkaufseinheit: 100 ST.
Lieske Part No.: 512133

Unsere Kabelbinder SES-QUICK SL MDE können durch Metallpartikel jederzeit detektiert werden. Die Kabelbinder sind für die Lebensmittel- sowie Pharmaindustrie und HACCP bestens geeignet. Die Kabelbinder sind halogenfrei und entsprechen der R Verkaufseinheit: 100 ST.
Lieske Part No.: 507394

Unsere Kabelbinder SES-QUICK SL MDE können durch Metallpartikel jederzeit detektiert werden. Die Kabelbinder sind für die Lebensmittel- sowie Pharmaindustrie und HACCP bestens geeignet. Die Kabelbinder sind halogenfrei und entsprechen der R Verkaufseinheit: 100 ST.
Lieske Part No.: 507395

Unsere Kabelbinder SES-QUICK SL MDE können durch Metallpartikel jederzeit detektiert werden. Die Kabelbinder sind für die Lebensmittel- sowie Pharmaindustrie und HACCP bestens geeignet. Die Kabelbinder sind halogenfrei und entsprechen der R Verkaufseinheit: 100 ST.
Lieske Part No.: 499329

Unsere Kabelbinder SES-QUICK SL MDE können durch Metallpartikel jederzeit detektiert werden. Die Kabelbinder sind für die Lebensmittel- sowie Pharmaindustrie und HACCP bestens geeignet. Die Kabelbinder sind halogenfrei und entsprechen der R Verkaufseinheit: 100 ST.
Lieske Part No.: 512134

Unsere Metallbinder INOX-BALL-QUICK werden dort eingesetzt, wo herkömmliche Kabelbinder nicht eingesetzt werden können. Dieser Metallbinder besteht aus Edelstahl 316 und eignet sich besonders für korrosive Bereiche wie z.B. Schiffbau, Bergb Verkaufseinheit: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 499331

Our INOX-MULTI-QUICK metal ties are used where conventional cable ties cannot be used. This metal tie is made of stainless steel 316 and is particularly suitable for corrosive areas such as shipbuilding, mining
Sales unit: 100 pieces
Lieske Part No.: 587343

Our INOX-MULTI-QUICK metal ties are used where conventional cable ties cannot be used. This metal tie is made of stainless steel 316 and is particularly suitable for corrosive areas such as shipbuilding, mining
Sales unit: 100 pieces
Lieske Part No.: 456478

Die Befestigungssockel aus Polyamid, in schwarz, sind für den Gebrauch mit unseren Installationskabelbindern der Serie SM, Breite 90mm, geeignet. Der Sockel in in PA6 eignet sich für den Innenanwendungen, während der Sockel in PA12 eher für Verkaufseinheit: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 499332

The polyamide mounting bases, in black, are suitable for use with our SM series installation cable ties, width 90mm. The base in PA6 is suitable for indoor applications, while the base in PA12 is more suitable for
Sales unit: 100 pieces
Lieske Part No.: 913027

The polyamide mounting bases, in black, are suitable for use with our SM series installation cable ties, width 90mm. The base in PA6 is suitable for indoor applications, while the base in PA12 is more suitable for
Sales unit: 100 pieces
Lieske Part No.: 908205

Die Befestigungssockel aus Polyamid, in schwarz, sind für den Gebrauch mit unseren Installationskabelbindern der Serie SM, Breite 90mm, geeignet. Der Sockel in in PA6 eignet sich für den Innenanwendungen, während der Sockel in PA12 eher für Verkaufseinheit: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 499334

Unser PLIOCATCH mit Stecksockel eignet sich zum Verbau in Maschinen oder Schaltschränken. Kabel und Leitungen können ganz einfach hinzugefügt oder entfernt werden. Unser PLIOCATCH ist halogenfrei und RoHS-konform. Verkaufseinheit: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 512136

Our waxed ABSA binding cord made of polyamide 6 enables cable bundles to be tied firmly. When tied, the cord lies flat. This means that no conductors are damaged. This binding method was developed for telecommunications technology
Lieske Part No.: 460378

Our waxed ABSA binding cord made of polyamide 6 enables cable bundles to be tied firmly. When tied, the cord lies flat. This means that no conductors are damaged. This binding method was developed for telecommunications technology
Lieske Part No.: 460423

The PLIO GZ-02 mounting base is suitable for attaching wiring ducts to perforated support walls or rails.
Sales unit: 20 pieces
Lieske Part No.: 763827

Fire protection class: Not relevant
Burning droplets: Not relevant
Smoke development: Not relevant
Acid development: Not relevant
Description: ODB 54 retrofit kit foam rubber patch cable seal
Lieske Part No.: 1329118

Fire protection class: Not relevant
Burning drippings: Not relevant
Smoke development: Not relevant
Acid development: Not relevant
Description: Velcro set (4 pcs.) for cable routing
Lieske Part No.: 854830

Fire protection class: Not relevant
Burning droplets: Not relevant
Smoke development: Not relevant
Acid development: Not relevant
Description: ODB 54 retrofit kit cable ties for gas/water blocker
Lieske Part No.: 1329117

The ERG50 and ERG120 cable tie tools as well as the new ERG50P pneumatic cable tie tool from ABB are characterized by exceptional reliability and performance, improved ergonomics and comfortable handling. These ergonomic tools with adjustable tightening tension and automatic cutting function are ideal for the effective processing of many types of plastic cable ties in industry (OEMs, maintenance and repair shops) as well as for other applications in trade and technology.
Lieske Part No.: 238657

ABB has an extensive product range of processing tools for all types of cable ties. The range includes both cost-effective and simple tools for small quantities, as well as robust and ergonomic processing tools for tensioning and automatically cutting the cable ties for larger quantities.
Lieske Part No.: 950705

ABB has an extensive product range of processing tools for all types of cable ties. The range includes both cost-effective and simple tools for small quantities, as well as robust and ergonomic processing tools for tensioning and automatically cutting the cable ties for larger quantities.
Lieske Part No.: 566811

The brown Ty-Rap steel nose cable tie made of polyamide 6.6 is available in several lengths and widths and different tensile strengths. This series is mainly suitable for indoor applications. The corrosion-resistant, anti-magnetic steel nose made of type 316 stainless steel in the cable tie head guarantees the strongest and most secure hold that can be found on the market. The powerful and reliable Ty-Rap can be used under the most adverse conditions such as vibration, heat or cold. The rounded edges and contours of the head and the tie ensure user-friendly handling and prevent the insulation of the cables and lines from being damaged by sharp edges or serrations. In addition, the smooth body without ratchet teeth or grooves reduces the number of overstressed areas. The light nubs on the inside of the band ensure that the tie sits firmly on the cable bundle. A large selection of accessories complements the range.
Sales unit: 1000 pieces
Lieske Part No.: 123752

The black UV-resistant Ty-Rap steel nose cable tie made of polyamide 6.6 is available in several lengths and widths and different tensile strengths. This series is especially suitable for outdoor installations. The cable tie is packaged in recyclable plastic bags with Euro holes and contains 2% carbon for military specifications. The corrosion-resistant, anti-magnetic steel nose made of type 316 stainless steel in the cable tie head guarantees the strongest and most secure hold that can be found on the market. The powerful and reliable Ty-Rap can be used in the most adverse conditions such as vibration, heat or cold. The rounded edges and contours of the head and the tie ensure user-friendly handling and prevent the insulation of the cables and lines from being damaged by sharp edges or serrations. In addition, the smooth body without ratchet teeth or grooves reduces the number of overstressed areas. The light nubs on the inside of the band ensure that the tie sits firmly on the cable bundle. A large selection of accessories complements the range.
Sales unit: 100 pieces
Lieske Part No.: 569541

The natural-colored Ty-Rap steel nose cable tie made of polyamide 6.6 is available in several lengths and widths and different tensile strengths. This series is mainly suitable for indoor applications and is packaged in recyclable plastic bags with Euro holes. The corrosion-resistant, anti-magnetic steel nose made of type 316 stainless steel in the cable tie head guarantees the strongest and most secure hold that can be found on the market. The powerful and reliable Ty-Rap can be used in the most adverse conditions such as vibration, heat or cold. The rounded edges and contours of the head and the tie ensure user-friendly handling and prevent the insulation of the cables and lines from being damaged by sharp edges or serrations. In addition, the smooth body without ratchet teeth or grooves reduces the number of overstressed areas. The light nubs on the inside of the band ensure that the tie sits firmly on the cable bundle. A large selection of accessories complements the range.
Sales unit: 100 pieces
Lieske Part No.: 521856

The natural-colored Ty-Rap steel nose cable tie made of polyamide 6.6 is available in several lengths and widths and different tensile strengths. This series is mainly suitable for indoor applications. The corrosion-resistant, anti-magnetic steel nose made of type 316 stainless steel in the cable tie head guarantees the strongest and most secure hold that can be found on the market. The powerful and reliable Ty-Rap can be used under the most adverse conditions such as vibration, heat or cold. The rounded edges and contours of the head and the tie ensure user-friendly handling and prevent the insulation of the cables and lines from being damaged by sharp edges or serrations. In addition, the smooth body without ratchet teeth or grooves reduces the number of overstressed areas. The light nubs on the inside of the band ensure that the tie sits firmly on the cable bundle. A large selection of accessories complements the range.
Sales unit: 1000 pieces
Lieske Part No.: 293640

The black UV-resistant Ty-Rap steel nose cable tie made of polyamide 6.6 is available in several lengths and widths and different tensile strengths. This series is especially suitable for outdoor installations. The corrosion-resistant, anti-magnetic steel nose made of type 316 stainless steel in the cable tie head guarantees the strongest and most secure hold that can be found on the market. The powerful and reliable Ty-Rap can be used under the most adverse conditions such as vibration, heat or cold. The rounded edges and contours of the head and the tie ensure user-friendly handling and prevent the insulation of the cables and lines from being damaged by sharp edges or serrations. In addition, the smooth body without ratchet teeth or grooves reduces the number of overstressed areas. The light nubs on the inside of the band ensure that the tie sits firmly on the cable bundle. A large selection of accessories complements the range.
Sales unit: 1000 pieces
Lieske Part No.: 768717

The natural-colored Ty-Rap steel nose cable tie made of polyamide 6.6 is available in several lengths and widths and different tensile strengths. This series is mainly suitable for indoor applications. The corrosion-resistant, anti-magnetic steel nose made of type 316 stainless steel in the cable tie head guarantees the strongest and most secure hold that can be found on the market. The powerful and reliable Ty-Rap can be used under the most adverse conditions such as vibration, heat or cold. The rounded edges and contours of the head and the tie ensure user-friendly handling and prevent the insulation of the cables and lines from being damaged by sharp edges or serrations. In addition, the smooth body without ratchet teeth or grooves reduces the number of overstressed areas. The light nubs on the inside of the band ensure that the tie sits firmly on the cable bundle. A large selection of accessories complements the range.
Sales unit: 1000 pieces
Lieske Part No.: 105028

The black UV-resistant Ty-Rap steel nose cable tie made of polyamide 6.6 is available in several lengths and widths and different tensile strengths. This series is especially suitable for outdoor installations. The corrosion-resistant, anti-magnetic steel nose made of type 316 stainless steel in the cable tie head guarantees the strongest and most secure hold that can be found on the market. The powerful and reliable Ty-Rap can be used under the most adverse conditions such as vibration, heat or cold. The rounded edges and contours of the head and the tie ensure user-friendly handling and prevent the insulation of the cables and lines from being damaged by sharp edges or serrations. In addition, the smooth body without ratchet teeth or grooves reduces the number of overstressed areas. The light nubs on the inside of the band ensure that the tie sits firmly on the cable bundle. A large selection of accessories complements the range.
Sales unit: 1000 pieces
Lieske Part No.: 105041