Angled 90°. With lip for strain relief for plugs. Mechanical protection for the plug/cable transition. Fastening eyelet. For use with round plugs according to VG standard. Approved for military technology. Heat-shrinkable molded parts for use on electrical and electronic cable harnesses.
Lieske Part No.: 2055820

Type: 1157-4-G-PEX-BK
Sales unit: 1 pc
Lieske Part No.: 885511

Type 1209-1-G BK PES 1 unit sales unit: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 466934

45 ° Branched parts (Y-pieces) are used for easy, time-saving insulation of the branching point of a cable on the individual wires. Additionally assume Branched hurry the mechanical strain relief in cable harnesses. Type: 1303-1 G-PEX-BK Quantity: 1 ea.
Sales unit: 100 pieces
Lieske Part No.: 494698

Easy creation of 30° and 45° branches in cable harnesses. Mechanical protection for branching points. Bulging: sufficient space for connectors. Approved for military technology. Optionally with factory-applied thermoplastic inner adhesive for sealing and strain relief. Heat-shrinkable molded parts for use on electrical and electronic cable harnesses.
Sales unit: 100 pieces
Lieske Part No.: 2094955

Einfaches Erstellen von 30° und 45° Abzweigungen in Kabelbäumen. Mechanischer Schutz für Verzweigstellen. Bauchig: ausreichend Platz für Verbinder. Zulassung für Wehrtechnik. Optional mit werkseitig eingebrachten thermoplastischem Innenkleber zur Abdichtung und Zugentlastung. Wärmeschrumpfende Formteile für die Verwendung an elektrischen und elektronischen Kabelbäumen. Verkaufseinheit: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 493488

Type: PEC-3/1 PEX BK 1000 ST item: 50 ST.
Sales unit: 50 pieces
Lieske Part No.: 803735

Type: PEC-6/2 PEX BK 1000 ST item: 50 ST.
Sales unit: 50 pieces
Lieske Part No.: 455833

The PEC-Series can be quickly and easily processed like a shrink tube. Through the inner glue and glue factory conclusion contained this shrinkable caps also offer a safe and clean seal. The advantageous shrink ratio of 3: 1 (up to 4: 1 available on request) and the different diameters allow a wide range of applications. Other diameters and lengths available on request. Type: PEC-9/3 item: 50 ST.
Sales unit: 50 pieces
Lieske Part No.: 859430

PEC (Pinched End Caps). Thermoplastic inner adhesive for protection against external influences and for strain relief. Quick and easy processing. High shrink ratio covers a wide range of applications. PEC end caps offer excellent mechanical and electrical properties for protecting cable connections and cable splices in electrical engineering. These products are also suitable outside of electrical engineering for general protection of, for example, cable ends, small housings or pipes.
Sales unit: 50 pieces
Lieske Part No.: 1101092

Fast and easy processing. Robust material protects against mechanical stress. Thermoplastic inner adhesive for protection against external influences and for strain relief. Advantageous shrinkage rate for a wide range of applications. Also available with air valves for compressed air-monitored telecommunications cable systems on request. Helashrink end caps are used to seal cable ends indoors and outdoors and are suitable for all common plastic-insulated cables with a mains voltage of 0.6 - 1 kV.
Lieske Part No.: 1349153

Fast and easy processing. Robust material protects against mechanical stress. Thermoplastic inner adhesive for protection against external influences and for strain relief. Advantageous shrinkage rate for a wide range of applications. Also available with air valves for compressed air-monitored telecommunications cable systems on request. Helashrink end caps are used to seal cable ends indoors and outdoors and are suitable for all common plastic-insulated cables with a mains voltage of 0.6 - 1 kV.
Sales unit: 24 pieces
Lieske Part No.: 1131354

Fast and easy processing. Robust material protects against mechanical stress. Thermoplastic inner adhesive for protection against external influences and for strain relief. Advantageous shrinkage rate for a wide range of applications. Also available with air valves for compressed air-monitored telecommunications cable systems on request. Helashrink end caps are used to seal cable ends indoors and outdoors and are suitable for all common plastic-insulated cables with a mains voltage of 0.6 - 1 kV.
Sales unit: 16 pieces
Lieske Part No.: 1596960

Fast and easy processing. Robust material protects against mechanical stress. Thermoplastic inner adhesive for protection against external influences and for strain relief. Advantageous shrinkage rate for a wide range of applications. Also available with air valves for compressed air-monitored telecommunications cable systems on request. Helashrink end caps are used to seal cable ends indoors and outdoors and are suitable for all common plastic-insulated cables with a mains voltage of 0.6 - 1 kV.
Lieske Part No.: 1131344

Type: 1617-1-B8W2 PEX BK 1 ST
Sales unit: 1 pc
Lieske Part No.: 124334

Easy creation of branches in cable harnesses. Mechanical protection for branching points. Low profile: space-saving design. Military and general performance use
Sales unit: 100 pieces
Lieske Part No.: 1239037

Easy creation of branches in cable harnesses. Mechanical protection for branching points. Low profile: space-saving design. Military and general performance use
Sales unit: 100 pieces
Lieske Part No.: 1563682

Sales Unit: 1 ST.
Lieske Part No.: 678508

Thick-walled: very good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Thermochromatic dots (TCP) as a shrink indicator. Locking rail enables cable repair without the cable end. Resistant to chemicals and alkaline earths. High weather resistance. Halogen-free. Packed in a set for simple and easy handling. RMS cable repair sleeves are placed around the affected area and closed with a locking rail. During the subsequent shrinking, the hot-melt adhesive on the inside seals the damaged area watertight and also compensates for unevenness in the cable surface.
Lieske Part No.: 1330812

Thick-walled: very good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Thermochromatic dots (TCP) as a shrink indicator. Locking rail enables cable repair without the cable end. Resistant to chemicals and alkaline earths. High weather resistance. Halogen-free. Packed in a set for simple and easy handling. RMS cable repair sleeves are placed around the affected area and closed with a locking rail. During the subsequent shrinking, the hot-melt adhesive on the inside seals the damaged area watertight and also compensates for unevenness in the cable surface.
Lieske Part No.: 343925

Thick-walled: very good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Thermochromatic dots (TCP) as a shrink indicator. Locking rail enables cable repair without the cable end. Resistant to chemicals and alkaline earths. High weather resistance. Halogen-free. Packed in a set for simple and easy handling. RMS cable repair sleeves are placed around the affected area and closed with a locking rail. During the subsequent shrinking, the hot-melt adhesive on the inside seals the damaged area watertight and also compensates for unevenness in the cable surface.
Lieske Part No.: 1565689

Thick-walled: very good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Thermochromatic dots (TCP) as a shrink indicator. Locking rail enables cable repair without the cable end. Resistant to chemicals and alkaline earths. High weather resistance. Halogen-free. Packed in a set for simple and easy handling. RMS cable repair sleeves are placed around the affected area and closed with a locking rail. During the subsequent shrinking, the hot-melt adhesive on the inside seals the damaged area watertight and also compensates for unevenness in the cable surface.
Lieske Part No.: 1132274

Thick-walled: very good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Thermochromatic dots (TCP) as a shrink indicator. Locking rail enables cable repair without the cable end. Resistant to chemicals and alkaline earths. High weather resistance. Halogen-free. Packed in a set for simple and easy handling. RMS cable repair sleeves are placed around the affected area and closed with a locking rail. During the subsequent shrinking, the hot-melt adhesive on the inside seals the damaged area watertight and also compensates for unevenness in the cable surface.
Lieske Part No.: 1132261

Sales Unit: 1 ST.
Lieske Part No.: 312012

Thick-walled: very good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Thermochromatic dots (TCP) as a shrink indicator. Locking rail enables cable repair without the cable end. Resistant to chemicals and alkaline earths. High weather resistance. Halogen-free. Packed in a set for simple and easy handling. RMS cable repair sleeves are placed around the affected area and closed with a locking rail. During the subsequent shrinking, the hot-melt adhesive on the inside seals the damaged area watertight and also compensates for unevenness in the cable surface.
Lieske Part No.: 2057154

Thick-walled: very good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Thermochromatic dots (TCP) as a shrink indicator. Locking rail enables cable repair without the cable end. Resistant to chemicals and alkaline earths. High weather resistance. Halogen-free. Packed in a set for simple and easy handling. RMS cable repair sleeves are placed around the affected area and closed with a locking rail. During the subsequent shrinking, the hot-melt adhesive on the inside seals the damaged area watertight and also compensates for unevenness in the cable surface.
Lieske Part No.: 1132275

Thick-walled: very good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Thermochromatic dots (TCP) as a shrink indicator. Locking rail enables cable repair without the cable end. Resistant to chemicals and alkaline earths. High weather resistance. Halogen-free. Packed in a set for simple and easy handling. RMS cable repair sleeves are placed around the affected area and closed with a locking rail. During the subsequent shrinking, the hot-melt adhesive on the inside seals the damaged area watertight and also compensates for unevenness in the cable surface.
Lieske Part No.: 344054

Thick-walled: very good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Thermochromatic dots (TCP) as a shrink indicator. Locking rail enables cable repair without the cable end. Resistant to chemicals and alkaline earths. High weather resistance. Halogen-free. Packed in a set for simple and easy handling. RMS cable repair sleeves are placed around the affected area and closed with a locking rail. During the subsequent shrinking, the hot-melt adhesive on the inside seals the damaged area watertight and also compensates for unevenness in the cable surface.
Lieske Part No.: 2129567

Thick-walled: very good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Thermochromatic dots (TCP) as a shrink indicator. Locking rail enables cable repair without the cable end. Resistant to chemicals and alkaline earths. High weather resistance. Halogen-free. Packed in a set for simple and easy handling. RMS cable repair sleeves are placed around the affected area and closed with a locking rail. During the subsequent shrinking, the hot-melt adhesive on the inside seals the damaged area watertight and also compensates for unevenness in the cable surface.
Lieske Part No.: 1565688

Thick-walled: very good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Thermochromatic dots (TCP) as a shrink indicator. Locking rail enables cable repair without the cable end. Resistant to chemicals and alkaline earths. High weather resistance. Halogen-free. Packed in a set for simple and easy handling. RMS cable repair sleeves are placed around the affected area and closed with a locking rail. During the subsequent shrinking, the hot-melt adhesive on the inside seals the damaged area watertight and also compensates for unevenness in the cable surface.
Lieske Part No.: 2057159

Sales Unit: 1 ST.
Lieske Part No.: 935268

Sales Unit: 1 ST.
Lieske Part No.: 928171

Sales Unit: 1 ST.
Lieske Part No.: 928098

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 176 meters
Lieske Part No.: 1346801

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 176 meters
Lieske Part No.: 1131364

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 110 meters
Lieske Part No.: 1346794

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 110 meters
Lieske Part No.: 2058380

Schrumpfrate 3:1. Verfügbar in den Farben Schwarz, Blau, Rot, Weiß und Gelb. Sonderfarben auf Anfrage. Kabeldurchmesser 1 mm bis 39 mm. Gute mechanische Festigkeit und gute Beständigkeit gegen organische Lösungsmittel und Chemikalien. Hochflexibel. Lieferung in praktischen, wiederverschließbaren Kartons. TCGT ist ein 3:1 Schrumpfschlauch im Endlosformat, welcher beidseitig bedruckt werden kann. Dieser Schrumpfschlauch eignet sich hervorragend zur Kennzeichnung von Kabeln und Leitungen im Schaltschrankbau, in der Automatisationstechnik, Medizintechnik und in der Kabelkonfektion. Er wird auf handlichen Rollen geliefert. Diese passen optimal in die von HellermannTyton angebotenen Drucksysteme. Werden Schlauchzuschnitte benötigt, ist dies problemlos mit dem optionalen Schneide- oder Perforationsmesser möglich. Verkaufseinheit: 110 MTR
Sales unit: 110 meters
Lieske Part No.: 687530

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 110 pieces
Lieske Part No.: 1131351

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 72 meters
Lieske Part No.: 2058381

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 54 meters
Lieske Part No.: 2058382

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 54 meters
Lieske Part No.: 2058383

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 26 meters
Lieske Part No.: 1131365

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 26 meters
Lieske Part No.: 2058384

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 26 meters
Lieske Part No.: 2058385

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 26 meters
Lieske Part No.: 1346793

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 26 meters
Lieske Part No.: 1346792

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 26 meters
Lieske Part No.: 1346791

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 26 meters
Lieske Part No.: 1346790

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 10 meters
Lieske Part No.: 1131123