Type: 223-2 B8W PEX-BK 1 ST
Lieske Part No.: 459819

Type: 304-1-G-PEX-BK

Sales unit: 100 pieces
Lieske Part No.: 145983

Type: 306-1-G-PEX-BK

Lieske Part No.: 876968

Einfaches Erstellen von Abzweigungen in Kabelbäumen. Mechanischer Schutz für Verzweigstellen. Thermoplastischer Innenkleber zum Schutz gegen äußere Einflüsse und zur Zugentlastung. Bauchig: ausreichend Platz für Verbinder. Kabelausbrüche werden aus einem harten vernetzten Polyolefin mit einem Flammschutzmittel hergestellt. Dieses ermöglicht den Einsatz im Innen- sowie im Außenbereich. Die Formteile bieten hervorragenden elektrischen und mechanischen Schutz. Die mit Innenkleber beschichteten Formteile bieten eine zuverlässige Abdichtung gegenüber Umwelteinflüssen und sind für 2,3,4, 5 und 6 adrige Kabel erhältlich.
Lieske Part No.: 498660

Type: 4

-
PES BK-G
ST
ST.
Sales unit: 100 pieces
Lieske Part No.: 550509

Easy creation of branches in cable harnesses. Mechanical protection for branching points. Thermoplastic inner adhesive for protection against external influences and for strain relief. Bulging: sufficient space for connectors. Cable breakouts are made from a hard cross-linked polyolefin with a flame retardant. This enables use both indoors and outdoors. The molded parts offer excellent electrical and mechanical protection. The molded parts coated with inner adhesive offer reliable sealing against environmental influences and are available for 2, 3, 4, 5 and 6-core cables.
Lieske Part No.: 974955

The molding has a very light and slim build and is used in the aerospace industry type: 24 - G-PEX-BK Quantity:



ST.
Sales unit: 100 pieces
Lieske Part No.: 102198

Angled 90°. With lip for strain relief for plugs. Mechanical protection for the plug/cable transition. For use with round plugs according to VG standard. Long cable entry for space-saving installation. Approved for military technology. Optionally with factory-applied thermoplastic inner adhesive for sealing and strain relief. Heat-shrinkable molded parts for use on electrical and electronic cable harnesses.
Sales unit: 100 pieces
Lieske Part No.: 731432

Angled 90°. With lip for strain relief for plugs. Mechanical protection for the plug/cable transition. For use with round plugs according to VG standard. Long cable entry for space-saving installation. Approved for military technology. Optionally with factory-applied thermoplastic inner adhesive for sealing and strain relief. Heat-shrinkable molded parts for use on electrical and electronic cable harnesses.
Sales unit: 100 pieces
Lieske Part No.: 780840

Type: 1152-4-G-PEX-BK

Sales unit: 10 pieces
Lieske Part No.: 347074

Angled 90°. With lip for strain relief for plugs. Mechanical protection for the plug/cable transition. Fastening eyelet. For use with round plugs according to VG standard. Approved for military technology. Heat-shrinkable molded parts for use on electrical and electronic cable harnesses.
Lieske Part No.: 2055819

Angled 90°. With lip for strain relief for plugs. Mechanical protection for the plug/cable transition. Fastening eyelet. For use with round plugs according to VG standard. Approved for military technology. Heat-shrinkable molded parts for use on electrical and electronic cable harnesses.
Lieske Part No.: 111000

Angled 90°. With lip for strain relief for plugs. Mechanical protection for the plug/cable transition. Fastening eyelet. For use with round plugs according to VG standard. Approved for military technology. Heat-shrinkable molded parts for use on electrical and electronic cable harnesses.
Lieske Part No.: 2056046

Angled 90°. With lip for strain relief for plugs. Mechanical protection for the plug/cable transition. Fastening eyelet. For use with round plugs according to VG standard. Approved for military technology. Heat-shrinkable molded parts for use on electrical and electronic cable harnesses.
Lieske Part No.: 963851

Type: 1156-4-G-PEX-BK

Lieske Part No.: 936517

Angled 90°. With lip for strain relief for plugs. Mechanical protection for the plug/cable transition. Fastening eyelet. For use with round plugs according to VG standard. Approved for military technology. Heat-shrinkable molded parts for use on electrical and electronic cable harnesses.
Lieske Part No.: 2055820

Abgewinkelt 90°. Mit Lippe zwecks Zugentlastung für Stecker. Mechanischer Schutz für den Übergang Stecker/Leitung. Befestigungsöse. Zur Verwendung mit Rundsteckern nach VG-Norm. Zulassung für Wehrtechnik. Wärmeschrumpfende Formteile für die Verwendung an elektrischen und elektronischen Kabelbäumen.
Lieske Part No.: 1278247

Type: 1157-4-G-PEX-BK

Lieske Part No.: 885511

Type 1209-1-G BK PES 1 unit
Sales unit: 100 pieces
Lieske Part No.: 466934

45 ° Branched parts (Y-pieces) are used for easy, time-saving insulation of the branching point of a cable on the individual wires. Additionally assume Branched hurry the mechanical strain relief in cable harnesses. Type: 1303-1 G-PEX-BK Quantity: 1 ea.
Sales unit: 100 pieces
Lieske Part No.: 494698

Easy creation of 30° and 45° branches in cable harnesses. Mechanical protection for branching points. Bulging: sufficient space for connectors. Approved for military technology. Optionally with factory-applied thermoplastic inner adhesive for sealing and strain relief. Heat-shrinkable molded parts for use on electrical and electronic cable harnesses.
Sales unit: 100 pieces
Lieske Part No.: 2094955

Type: PEC-3/1 PEX BK 1000 ST item: 50 ST.
Sales unit: 50 pieces
Lieske Part No.: 803735

Type: PEC-6/2 PEX BK 1000 ST item: 50 ST.
Sales unit: 50 pieces
Lieske Part No.: 455833

The PEC-Series can be quickly and easily processed like a shrink tube. Through the inner glue and glue factory conclusion contained this shrinkable caps also offer a safe and clean seal. The advantageous shrink ratio of 3: 1 (up to 4: 1 available on request) and the different diameters allow a wide range of applications. Other diameters and lengths available on request. Type: PEC-9/3 item: 50 ST.
Sales unit: 50 pieces
Lieske Part No.: 859430

PEC (Pinched End Caps). Thermoplastic inner adhesive for protection against external influences and for strain relief. Quick and easy processing. High shrink ratio covers a wide range of applications. PEC end caps offer excellent mechanical and electrical properties for protecting cable connections and cable splices in electrical engineering. These products are also suitable outside of electrical engineering for general protection of, for example, cable ends, small housings or pipes.
Sales unit: 50 pieces
Lieske Part No.: 1101092

Fast and easy processing. Robust material protects against mechanical stress. Thermoplastic inner adhesive for protection against external influences and for strain relief. Advantageous shrinkage rate for a wide range of applications. Also available with air valves for compressed air-monitored telecommunications cable systems on request. Helashrink end caps are used to seal cable ends indoors and outdoors and are suitable for all common plastic-insulated cables with a mains voltage of 0.6 - 1 kV.
Lieske Part No.: 1349153

Fast and easy processing. Robust material protects against mechanical stress. Thermoplastic inner adhesive for protection against external influences and for strain relief. Advantageous shrinkage rate for a wide range of applications. Also available with air valves for compressed air-monitored telecommunications cable systems on request. Helashrink end caps are used to seal cable ends indoors and outdoors and are suitable for all common plastic-insulated cables with a mains voltage of 0.6 - 1 kV.
Sales unit: 24 pieces
Lieske Part No.: 1131354

Fast and easy processing. Robust material protects against mechanical stress. Thermoplastic inner adhesive for protection against external influences and for strain relief. Advantageous shrinkage rate for a wide range of applications. Also available with air valves for compressed air-monitored telecommunications cable systems on request. Helashrink end caps are used to seal cable ends indoors and outdoors and are suitable for all common plastic-insulated cables with a mains voltage of 0.6 - 1 kV.
Sales unit: 16 pieces
Lieske Part No.: 1596960

Fast and easy processing. Robust material protects against mechanical stress. Thermoplastic inner adhesive for protection against external influences and for strain relief. Advantageous shrinkage rate for a wide range of applications. Also available with air valves for compressed air-monitored telecommunications cable systems on request. Helashrink end caps are used to seal cable ends indoors and outdoors and are suitable for all common plastic-insulated cables with a mains voltage of 0.6 - 1 kV.
Lieske Part No.: 1131344

Type: 1617-1-B8W2 PEX BK 1 ST

Lieske Part No.: 124334

Easy creation of branches in cable harnesses. Mechanical protection for branching points. Low profile: space-saving design. Military and general performance use
Sales unit: 100 pieces
Lieske Part No.: 1239037

Easy creation of branches in cable harnesses. Mechanical protection for branching points. Low profile: space-saving design. Military and general performance use
Sales unit: 100 pieces
Lieske Part No.: 1563682

Formschale: einteilig, farbig, wiederöffenbar, schlagfest, flammhemmend. Gefüllt mit RELICON Gel, hochisolierend, kennzeichnungsfrei. Mischen entfällt, einfachste Montage. UV und Wetter resistent. Unbegrenzt lagerfähig. Mit Verbinderblock. Montagefertig. System geprüft nach EN 50393 (entspricht DIN VDE 0278-393). IPX8 getestet. Die Geltechnologie von RELICON bietet besondere Vorteile. Sie ist einfach und schnell zu montieren. Die mit einem Filmscharnier verbundenen Formschalen sind aus schlagfestem Polypropylen (PP). Das RELICON Gel in der Schale übernimmt das Isolieren und Abdichten der Verbindung. Relifix ist eine universelle Verbindungs- und Abzweiggarnitur. Abhängig vom Klemmen-Typ kann sie für Verbindungen und Einzelabzweigungen benutzt werden. Sie wird verwendet mit Kunststoffkabeln und Leitungen aus PVC, PE, EPR und VPE wie N(A)YY, NYM und H05. Anwendungsgebiete: Im Niederspannungsnetz als Verbindungsgarnitur für beispielsweise die Außenbeleuchtung oder als Durchgangsgarnitur zur Kabelreparatur. In Installationskanälen und Innenräumen, im Erdreich, im Freien und im Wasser.
Lieske Part No.: 678508

Thick-walled: very good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Thermochromatic dots (TCP) as a shrink indicator. Locking rail enables cable repair without the cable end. Resistant to chemicals and alkaline earths. High weather resistance. Halogen-free. Packed in a set for simple and easy handling. RMS cable repair sleeves are placed around the affected area and closed with a locking rail. During the subsequent shrinking, the hot-melt adhesive on the inside seals the damaged area watertight and also compensates for unevenness in the cable surface.
Lieske Part No.: 1330812

Thick-walled: very good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Thermochromatic dots (TCP) as a shrink indicator. Locking rail enables cable repair without the cable end. Resistant to chemicals and alkaline earths. High weather resistance. Halogen-free. Packed in a set for simple and easy handling. RMS cable repair sleeves are placed around the affected area and closed with a locking rail. During the subsequent shrinking, the hot-melt adhesive on the inside seals the damaged area watertight and also compensates for unevenness in the cable surface.
Lieske Part No.: 343925

Thick-walled: very good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Thermochromatic dots (TCP) as a shrink indicator. Locking rail enables cable repair without the cable end. Resistant to chemicals and alkaline earths. High weather resistance. Halogen-free. Packed in a set for simple and easy handling. RMS cable repair sleeves are placed around the affected area and closed with a locking rail. During the subsequent shrinking, the hot-melt adhesive on the inside seals the damaged area watertight and also compensates for unevenness in the cable surface.
Lieske Part No.: 1565689

Thick-walled: very good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Thermochromatic dots (TCP) as a shrink indicator. Locking rail enables cable repair without the cable end. Resistant to chemicals and alkaline earths. High weather resistance. Halogen-free. Packed in a set for simple and easy handling. RMS cable repair sleeves are placed around the affected area and closed with a locking rail. During the subsequent shrinking, the hot-melt adhesive on the inside seals the damaged area watertight and also compensates for unevenness in the cable surface.
Lieske Part No.: 1132274

Thick-walled: very good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Thermochromatic dots (TCP) as a shrink indicator. Locking rail enables cable repair without the cable end. Resistant to chemicals and alkaline earths. High weather resistance. Halogen-free. Packed in a set for simple and easy handling. RMS cable repair sleeves are placed around the affected area and closed with a locking rail. During the subsequent shrinking, the hot-melt adhesive on the inside seals the damaged area watertight and also compensates for unevenness in the cable surface.
Lieske Part No.: 1132261

Dickwandig: sehr guter Abrieb-, Knick- und Schnittschutz. 4:1 deckt großen Anwendungsbereich ab, hoher Anpressdruck. Thermoplastischer Innenkleber zum Schutz gegen äußere Einflüsse und zur Zugentlastung. Thermochromatische Punkte (TCP) als Schrumpfindikator. Verschlussschiene ermöglicht Kabelreparatur ohne Kabelende. Beständig gegen Chemikalien und Erdalkalien. Hohe Witterungsbeständigkeit. halogenfrei. Verpackung im Set für eine einfache Handhabung. RMS Kabelreparaturmanschetten werden um die betroffene Stelle gelegt und mit einer Verschlussschiene verschlossen. Beim anschließenden Schrumpfen dichtet der innenseitige Heißschmelzkleber die Schadstelle wasserdicht ab und gleicht dabei zusätzlich Unebenheiten des Kabeluntergrundes aus.
Lieske Part No.: 312012

Thick-walled: very good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Thermochromatic dots (TCP) as a shrink indicator. Locking rail enables cable repair without the cable end. Resistant to chemicals and alkaline earths. High weather resistance. Halogen-free. Packed in a set for simple and easy handling. RMS cable repair sleeves are placed around the affected area and closed with a locking rail. During the subsequent shrinking, the hot-melt adhesive on the inside seals the damaged area watertight and also compensates for unevenness in the cable surface.
Lieske Part No.: 2057154

Thick-walled: very good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Thermochromatic dots (TCP) as a shrink indicator. Locking rail enables cable repair without the cable end. Resistant to chemicals and alkaline earths. High weather resistance. Halogen-free. Packed in a set for simple and easy handling. RMS cable repair sleeves are placed around the affected area and closed with a locking rail. During the subsequent shrinking, the hot-melt adhesive on the inside seals the damaged area watertight and also compensates for unevenness in the cable surface.
Lieske Part No.: 1132275

Thick-walled: very good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Thermochromatic dots (TCP) as a shrink indicator. Locking rail enables cable repair without the cable end. Resistant to chemicals and alkaline earths. High weather resistance. Halogen-free. Packed in a set for simple and easy handling. RMS cable repair sleeves are placed around the affected area and closed with a locking rail. During the subsequent shrinking, the hot-melt adhesive on the inside seals the damaged area watertight and also compensates for unevenness in the cable surface.
Lieske Part No.: 344054

Thick-walled: very good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Thermochromatic dots (TCP) as a shrink indicator. Locking rail enables cable repair without the cable end. Resistant to chemicals and alkaline earths. High weather resistance. Halogen-free. Packed in a set for simple and easy handling. RMS cable repair sleeves are placed around the affected area and closed with a locking rail. During the subsequent shrinking, the hot-melt adhesive on the inside seals the damaged area watertight and also compensates for unevenness in the cable surface.
Lieske Part No.: 2129567

Thick-walled: very good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Thermochromatic dots (TCP) as a shrink indicator. Locking rail enables cable repair without the cable end. Resistant to chemicals and alkaline earths. High weather resistance. Halogen-free. Packed in a set for simple and easy handling. RMS cable repair sleeves are placed around the affected area and closed with a locking rail. During the subsequent shrinking, the hot-melt adhesive on the inside seals the damaged area watertight and also compensates for unevenness in the cable surface.
Lieske Part No.: 1565688

Thick-walled: very good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Thermochromatic dots (TCP) as a shrink indicator. Locking rail enables cable repair without the cable end. Resistant to chemicals and alkaline earths. High weather resistance. Halogen-free. Packed in a set for simple and easy handling. RMS cable repair sleeves are placed around the affected area and closed with a locking rail. During the subsequent shrinking, the hot-melt adhesive on the inside seals the damaged area watertight and also compensates for unevenness in the cable surface.
Lieske Part No.: 2057159

Dickwandig: sehr guter Abrieb-, Knick- und Schnittschutz. 4:1 deckt großen Anwendungsbereich ab, hoher Anpressdruck. Thermoplastischer Innenkleber zum Schutz gegen äußere Einflüsse und zur Zugentlastung. Thermochromatische Punkte (TCP) als Schrumpfindikator. Verschlussschiene ermöglicht Kabelreparatur ohne Kabelende. Beständig gegen Chemikalien und Erdalkalien. Hohe Witterungsbeständigkeit. halogenfrei. Verpackung im Set für eine einfache Handhabung. RMS Kabelreparaturmanschetten werden um die betroffene Stelle gelegt und mit einer Verschlussschiene verschlossen. Beim anschließenden Schrumpfen dichtet der innenseitige Heißschmelzkleber die Schadstelle wasserdicht ab und gleicht dabei zusätzlich Unebenheiten des Kabeluntergrundes aus.
Lieske Part No.: 935268

Dickwandig: sehr guter Abrieb-, Knick- und Schnittschutz. 4:1 deckt großen Anwendungsbereich ab, hoher Anpressdruck. Thermoplastischer Innenkleber zum Schutz gegen äußere Einflüsse und zur Zugentlastung. Thermochromatische Punkte (TCP) als Schrumpfindikator. Verschlussschiene ermöglicht Kabelreparatur ohne Kabelende. Beständig gegen Chemikalien und Erdalkalien. Hohe Witterungsbeständigkeit. halogenfrei. Verpackung im Set für eine einfache Handhabung. RMS Kabelreparaturmanschetten werden um die betroffene Stelle gelegt und mit einer Verschlussschiene verschlossen. Beim anschließenden Schrumpfen dichtet der innenseitige Heißschmelzkleber die Schadstelle wasserdicht ab und gleicht dabei zusätzlich Unebenheiten des Kabeluntergrundes aus.
Lieske Part No.: 928171

Dickwandig: sehr guter Abrieb-, Knick- und Schnittschutz. 4:1 deckt großen Anwendungsbereich ab, hoher Anpressdruck. Thermoplastischer Innenkleber zum Schutz gegen äußere Einflüsse und zur Zugentlastung. Thermochromatische Punkte (TCP) als Schrumpfindikator. Verschlussschiene ermöglicht Kabelreparatur ohne Kabelende. Beständig gegen Chemikalien und Erdalkalien. Hohe Witterungsbeständigkeit. halogenfrei. Verpackung im Set für eine einfache Handhabung. RMS Kabelreparaturmanschetten werden um die betroffene Stelle gelegt und mit einer Verschlussschiene verschlossen. Beim anschließenden Schrumpfen dichtet der innenseitige Heißschmelzkleber die Schadstelle wasserdicht ab und gleicht dabei zusätzlich Unebenheiten des Kabeluntergrundes aus.
Lieske Part No.: 928098

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 176 meters
Lieske Part No.: 1346801

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 176 meters
Lieske Part No.: 1131364