Thick-walled: very good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic internal adhesive for protection against external influences and for strain relief. Screw connector. Thermochromatic dots (green dots) as shrink indicator. Resistant to chemicals and alkaline earths. High weather resistance. Halogen-free. Packed in a set for easy handling. The LVK-C heat shrink connection set is used for universal connection of unarmored plastic cables and lines made of PVC, PE and VPE (e.g. N(A)YY, NYM, TT). It is suitable for use with press and screw connectors on aluminum and copper cables, nominal voltage 0.6/1.0 (1.2) kV.
Lieske Part No.: 1588244

Thick-walled: very good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic internal adhesive for protection against external influences and for strain relief. Screw connector. Thermochromatic dots (green dots) as shrink indicator. Resistant to chemicals and alkaline earths. High weather resistance. Halogen-free. Packed in a set for easy handling. The LVK-C heat shrink connection set is used for universal connection of unarmored plastic cables and lines made of PVC, PE and VPE (e.g. N(A)YY, NYM, TT). It is suitable for use with press and screw connectors on aluminum and copper cables, nominal voltage 0.6/1.0 (1.2) kV.
Lieske Part No.: 2058486

Thick-walled: very good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic internal adhesive for protection against external influences and for strain relief. Screw connector. Thermochromatic dots (green dots) as shrink indicator. Resistant to chemicals and alkaline earths. High weather resistance. Halogen-free. Packed in a set for easy handling. The LVK-C heat shrink connection set is used for universal connection of unarmored plastic cables and lines made of PVC, PE and VPE (e.g. N(A)YY, NYM, TT). It is suitable for use with press and screw connectors on aluminum and copper cables, nominal voltage 0.6/1.0 (1.2) kV.
Lieske Part No.: 2058487

With lip for strain relief for plugs. Mechanical protection for the plug/cable transition. For use with round plugs according to VG standard. Approved for military technology. Optionally with factory-applied thermoplastic inner adhesive for sealing and strain relief. Heat-shrinkable molded parts for use on electrical and electronic cable harnesses.
Sales unit: 100 pieces
Lieske Part No.: 2094956

Steckverbinderendgehäuse than just protection from the elements for circular connectors according to VG. The inner lip is an enhanced strain relief. Form portion 199-4-G for audio plugs has external ribs for improved grip. Type: 152-42-G-PEX-BK item: 1 ST.
Lieske Part No.: 396546

With lip for strain relief for plugs. Mechanical protection for the plug/cable transition. For use with round plugs according to VG standard. Fastening eyelet. Approved for military technology. Optionally with factory-applied thermoplastic inner adhesive for sealing and strain relief. Heat-shrinkable molded parts for use on electrical and electronic cable harnesses.
Sales unit: 10 pieces
Lieske Part No.: 2055170

Steckverbinderendgehäuse than just protection from the elements for circular connectors according to VG. The inner lip is an enhanced strain relief. Form portion 199-4-G for audio plugs has external ribs for improved grip. Type: 153-41-G-PEX-BK item: 50 ST.
Sales unit: 50 pieces
Lieske Part No.: 423378

The molding has excellent properties as a strain relief and mechanical protection type: 154-42-G-PEX-BK item: 1 ST.
Lieske Part No.: 649091

The molding has excellent properties as a strain relief and mechanical protection type:
55-42-G-PEX-BK item:
ST.
Lieske Part No.: 982376

With lip for strain relief for plugs. Mechanical protection for the plug/cable transition. For use with round plugs according to VG standard. Fastening eyelet. Approved for military technology. Optionally with factory-applied thermoplastic inner adhesive for sealing and strain relief. Heat-shrinkable molded parts for use on electrical and electronic cable harnesses.
Sales unit: 100 pieces
Lieske Part No.: 2055171

With lip for strain relief for plugs. Mechanical protection for the plug/cable transition. For use with round plugs according to VG standard. Fastening eyelet. Approved for military technology. Optionally with factory-applied thermoplastic inner adhesive for sealing and strain relief. Heat-shrinkable molded parts for use on electrical and electronic cable harnesses.
Lieske Part No.: 1051655

With lip for strain relief for plugs. Mechanical protection for the plug/cable transition. For use with round plugs according to VG standard. Approved for military technology. Optionally with factory-applied thermoplastic inner adhesive for sealing and strain relief. Heat-shrinkable molded parts for use on electrical and electronic cable harnesses.
Lieske Part No.: 2054898

Type: 177-1-G PES BK 1 ST
Sales unit: 25 pc
Sales unit: 100 pieces
Lieske Part No.: 279594

With lip for strain relief for plugs. Ribs provide increased grip. Mechanical protection for the plug/cable transition. For use with round plugs according to VG standard. Approved for military technology. Optionally with factory-applied thermoplastic inner adhesive for sealing and strain relief. Heat-shrinkable molded parts for use on electrical and electronic cable harnesses.
Sales unit: 100 pieces
Lieske Part No.: 1315009

Type: 203-1-G-PEX-BK
Sales unit: 1 pc
Lieske Part No.: 625974

Easy creation of branches in cable harnesses. Mechanical protection for branching points. Insulation of splices according to VG standard. Bulging: sufficient space for connectors. Approved for military technology. Optionally with factory-applied thermoplastic inner adhesive for sealing and strain relief. Heat-shrinkable molded parts for use on electrical and electronic cable harnesses.
Sales unit: 100 pieces
Lieske Part No.: 1314992

Type: 206-1-G-PEX-BK
Sales unit: 1 pc
Lieske Part No.: 444825

Easy creation of branches in cable harnesses. Mechanical protection for branching points. Insulation of splices according to VG standard. Bulging: sufficient space for connectors. Approved for military technology. Optionally with factory-applied thermoplastic inner adhesive for sealing and strain relief. Heat-shrinkable molded parts for use on electrical and electronic cable harnesses.
Sales unit: 100 pieces
Lieske Part No.: 1580441

Type: 213-1-G-PEX-BK
Sales unit: 1 pc
Sales unit: 100 pieces
Lieske Part No.: 694679

Type: 216-3-B8W
Sales unit: 50 pc
Sales unit: 10 pieces
Lieske Part No.: 450998

Type: 223-2 B8W PEX-BK 1 ST sales unit: 1 ST.
Lieske Part No.: 459819

Type: 304-1-G-PEX-BK
Sales unit: 1 pc
Sales unit: 100 pieces
Lieske Part No.: 145983

Type: 306-1-G-PEX-BK
Sales unit: 1 pc
Lieske Part No.: 876968

Einfaches Erstellen von Abzweigungen in Kabelbäumen. Mechanischer Schutz für Verzweigstellen. Thermoplastischer Innenkleber zum Schutz gegen äußere Einflüsse und zur Zugentlastung. Bauchig: ausreichend Platz für Verbinder. Kabelausbrüche werden aus einem harten vernetzten Polyolefin mit einem Flammschutzmittel hergestellt. Dieses ermöglicht den Einsatz im Innen- sowie im Außenbereich. Die Formteile bieten hervorragenden elektrischen und mechanischen Schutz. Die mit Innenkleber beschichteten Formteile bieten eine zuverlässige Abdichtung gegenüber Umwelteinflüssen und sind für 2,3,4, 5 und 6 adrige Kabel erhältlich. Verkaufseinheit: 1 ST.
Lieske Part No.: 498660

Type: 4

-
PES BK-G
ST sales unit:
ST.
Sales unit: 100 pieces
Lieske Part No.: 550509

Easy creation of branches in cable harnesses. Mechanical protection for branching points. Thermoplastic inner adhesive for protection against external influences and for strain relief. Bulging: sufficient space for connectors. Cable breakouts are made from a hard cross-linked polyolefin with a flame retardant. This enables use both indoors and outdoors. The molded parts offer excellent electrical and mechanical protection. The molded parts coated with inner adhesive offer reliable sealing against environmental influences and are available for 2, 3, 4, 5 and 6-core cables.
Lieske Part No.: 974955

Type: 1121-1-G-PEX-BK
Sales unit: 1 pc
Sales unit: 100 pieces
Lieske Part No.: 170779

The molding has a very light and slim build and is used in the aerospace industry type: 24 - G-PEX-BK Quantity:



ST.
Sales unit: 100 pieces
Lieske Part No.: 102198

Angled 90°. With lip for strain relief for plugs. Mechanical protection for the plug/cable transition. For use with round plugs according to VG standard. Long cable entry for space-saving installation. Approved for military technology. Optionally with factory-applied thermoplastic inner adhesive for sealing and strain relief. Heat-shrinkable molded parts for use on electrical and electronic cable harnesses.
Sales unit: 100 pieces
Lieske Part No.: 731432

Angled 90°. With lip for strain relief for plugs. Mechanical protection for the plug/cable transition. For use with round plugs according to VG standard. Long cable entry for space-saving installation. Approved for military technology. Optionally with factory-applied thermoplastic inner adhesive for sealing and strain relief. Heat-shrinkable molded parts for use on electrical and electronic cable harnesses.
Sales unit: 100 pieces
Lieske Part No.: 780840

Type: 1152-4-G-PEX-BK
Sales unit: 1 pc
Sales unit: 10 pieces
Lieske Part No.: 347074

Angled 90°. With lip for strain relief for plugs. Mechanical protection for the plug/cable transition. Fastening eyelet. For use with round plugs according to VG standard. Approved for military technology. Heat-shrinkable molded parts for use on electrical and electronic cable harnesses.
Lieske Part No.: 2055819

Angled 90°. With lip for strain relief for plugs. Mechanical protection for the plug/cable transition. Fastening eyelet. For use with round plugs according to VG standard. Approved for military technology. Heat-shrinkable molded parts for use on electrical and electronic cable harnesses.
Lieske Part No.: 111000

Angled 90°. With lip for strain relief for plugs. Mechanical protection for the plug/cable transition. Fastening eyelet. For use with round plugs according to VG standard. Approved for military technology. Heat-shrinkable molded parts for use on electrical and electronic cable harnesses.
Lieske Part No.: 2056046

Angled 90°. With lip for strain relief for plugs. Mechanical protection for the plug/cable transition. Fastening eyelet. For use with round plugs according to VG standard. Approved for military technology. Heat-shrinkable molded parts for use on electrical and electronic cable harnesses.
Lieske Part No.: 963851

Type: 1156-4-G-PEX-BK
Sales unit: 1 pc
Lieske Part No.: 936517

Angled 90°. With lip for strain relief for plugs. Mechanical protection for the plug/cable transition. Fastening eyelet. For use with round plugs according to VG standard. Approved for military technology. Heat-shrinkable molded parts for use on electrical and electronic cable harnesses.
Lieske Part No.: 2055820

Type: 1157-4-G-PEX-BK
Sales unit: 1 pc
Lieske Part No.: 885511

Type 1209-1-G BK PES 1 unit sales unit: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 466934

45 ° Branched parts (Y-pieces) are used for easy, time-saving insulation of the branching point of a cable on the individual wires. Additionally assume Branched hurry the mechanical strain relief in cable harnesses. Type: 1303-1 G-PEX-BK Quantity: 1 ea.
Sales unit: 100 pieces
Lieske Part No.: 494698

Easy creation of 30° and 45° branches in cable harnesses. Mechanical protection for branching points. Bulging: sufficient space for connectors. Approved for military technology. Optionally with factory-applied thermoplastic inner adhesive for sealing and strain relief. Heat-shrinkable molded parts for use on electrical and electronic cable harnesses.
Sales unit: 100 pieces
Lieske Part No.: 2094955

Einfaches Erstellen von 30° und 45° Abzweigungen in Kabelbäumen. Mechanischer Schutz für Verzweigstellen. Bauchig: ausreichend Platz für Verbinder. Zulassung für Wehrtechnik. Optional mit werkseitig eingebrachten thermoplastischem Innenkleber zur Abdichtung und Zugentlastung. Wärmeschrumpfende Formteile für die Verwendung an elektrischen und elektronischen Kabelbäumen. Verkaufseinheit: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 493488

Type: PEC-3/1 PEX BK 1000 ST item: 50 ST.
Sales unit: 50 pieces
Lieske Part No.: 803735

Type: PEC-6/2 PEX BK 1000 ST item: 50 ST.
Sales unit: 50 pieces
Lieske Part No.: 455833

The PEC-Series can be quickly and easily processed like a shrink tube. Through the inner glue and glue factory conclusion contained this shrinkable caps also offer a safe and clean seal. The advantageous shrink ratio of 3: 1 (up to 4: 1 available on request) and the different diameters allow a wide range of applications. Other diameters and lengths available on request. Type: PEC-9/3 item: 50 ST.
Sales unit: 50 pieces
Lieske Part No.: 859430

PEC (Pinched End Caps). Thermoplastic inner adhesive for protection against external influences and for strain relief. Quick and easy processing. High shrink ratio covers a wide range of applications. PEC end caps offer excellent mechanical and electrical properties for protecting cable connections and cable splices in electrical engineering. These products are also suitable outside of electrical engineering for general protection of, for example, cable ends, small housings or pipes.
Sales unit: 50 pieces
Lieske Part No.: 1101092

Fast and easy processing. Robust material protects against mechanical stress. Thermoplastic inner adhesive for protection against external influences and for strain relief. Advantageous shrinkage rate for a wide range of applications. Also available with air valves for compressed air-monitored telecommunications cable systems on request. Helashrink end caps are used to seal cable ends indoors and outdoors and are suitable for all common plastic-insulated cables with a mains voltage of 0.6 - 1 kV.
Lieske Part No.: 1349153

Fast and easy processing. Robust material protects against mechanical stress. Thermoplastic inner adhesive for protection against external influences and for strain relief. Advantageous shrinkage rate for a wide range of applications. Also available with air valves for compressed air-monitored telecommunications cable systems on request. Helashrink end caps are used to seal cable ends indoors and outdoors and are suitable for all common plastic-insulated cables with a mains voltage of 0.6 - 1 kV.
Sales unit: 24 pieces
Lieske Part No.: 1131354

Fast and easy processing. Robust material protects against mechanical stress. Thermoplastic inner adhesive for protection against external influences and for strain relief. Advantageous shrinkage rate for a wide range of applications. Also available with air valves for compressed air-monitored telecommunications cable systems on request. Helashrink end caps are used to seal cable ends indoors and outdoors and are suitable for all common plastic-insulated cables with a mains voltage of 0.6 - 1 kV.
Sales unit: 16 pieces
Lieske Part No.: 1596960

Fast and easy processing. Robust material protects against mechanical stress. Thermoplastic inner adhesive for protection against external influences and for strain relief. Advantageous shrinkage rate for a wide range of applications. Also available with air valves for compressed air-monitored telecommunications cable systems on request. Helashrink end caps are used to seal cable ends indoors and outdoors and are suitable for all common plastic-insulated cables with a mains voltage of 0.6 - 1 kV.
Lieske Part No.: 1131344