Thin-walled: flexible, light, space-saving. 4:1 covers a larger application area, higher contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Very good fire protection properties. Resistant to chemicals. Good dielectric strength. EPS is used in a variety of electronic applications as a seal and protection, such as plugs, connections and branches. Due to the high dielectric strength, EPS provides reliable protection even at higher voltage peaks. EPS-400 offers a higher contact pressure due to the higher shrink ratio.
Sales unit: 100 meters
Lieske Part No.: 1580395

Thin-walled: flexible, light, space-saving. 4:1 covers a larger application area, higher contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Very good fire protection properties. Resistant to chemicals. Good dielectric strength. EPS is used in a variety of electronic applications as a seal and protection, such as plugs, connections and branches. Due to the high dielectric strength, EPS provides reliable protection even at higher voltage peaks. EPS-400 offers a higher contact pressure due to the higher shrink ratio.
Sales unit: 25 meters
Lieske Part No.: 1580394

Thin-walled: flexible, light, space-saving. 4:1 covers a larger application area, higher contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Very good fire protection properties. Resistant to chemicals. Good dielectric strength. EPS is used in a variety of electronic applications as a seal and protection, such as plugs, connections and branches. Due to the high dielectric strength, EPS provides reliable protection even at higher voltage peaks. EPS-400 offers a higher contact pressure due to the higher shrink ratio.
Sales unit: 25 meters
Lieske Part No.: 2054899

Type: EPS400-4/1-PEX-BK

Sales unit: 300 meters
Lieske Part No.: 441212

Type: EPS-400-8/2 PEX BK 150 M

Sales unit: 150 meters
Lieske Part No.: 658910

Thin-walled: flexible, light, space-saving. 4:1 covers a larger application area, higher contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Very good fire protection properties. Resistant to chemicals. Good dielectric strength. EPS is used in a variety of electronic applications as a seal and protection, such as plugs, connections and branches. Due to the high dielectric strength, EPS provides reliable protection even at higher voltage peaks. EPS-400 offers a higher contact pressure due to the higher shrink ratio.
Sales unit: 100 meters
Lieske Part No.: 1580409

Thin-walled: flexible, light, space-saving. 4:1 covers a larger application area, higher contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Very good fire protection properties. Resistant to chemicals. Good dielectric strength. EPS is used in a variety of electronic applications as a seal and protection, such as plugs, connections and branches. Due to the high dielectric strength, EPS provides reliable protection even at higher voltage peaks. EPS-400 offers a higher contact pressure due to the higher shrink ratio.
Sales unit: 100 meters
Lieske Part No.: 966545

Thin-walled: flexible, light, space-saving. 4:1 covers a larger application area, higher contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Very good fire protection properties. Resistant to chemicals. Good dielectric strength. EPS is used in a variety of electronic applications as a seal and protection, such as plugs, connections and branches. Due to the high dielectric strength, EPS provides reliable protection even at higher voltage peaks. EPS-400 offers a higher contact pressure due to the higher shrink ratio.
Sales unit: 50 meters
Lieske Part No.: 1580408

Type: EPS400-32/8-PEX-BK

Sales unit: 25 meters
Lieske Part No.: 499839

Standard wall: higher mechanical strength than thin-walled, more flexible than medium-walled. Highly flexible even at extreme sub-zero temperatures. Well suited for mobile applications. Very good mechanical strength even at high temperatures. Approved for military technology. The rubber-like material offers a high coefficient of friction. High chemical resistance, especially fuel, oil and sea water. SE28 is ideally suited for use in motorsports and generally in the engine compartment of vehicles due to its very good mechanical and chemical resistance at high temperatures. These properties and the resistance and elasticity at extreme sub-zero temperatures are also ideal for aviation and military technology.
Sales unit: 60 meters
Lieske Part No.: 1135032

Standardwandig: höhere mechanische Festigkeit als dünnwandig, flexibler als mittelwandig. Hochflexibel auch bei extremen Minustemperaturen. Gut geeignet für bewegliche Anwendungen. Sehr gute mechanische Festigkeit auch bei hohen Temperaturen. Zulassung für Wehrtechnik. Das gummiartige Material bietet einen hohen Reibungskoeffizient. Hohe Chemikalienbeständigkeit, insbesondere Treibstoff, Öl und Seewasser. SE28 ist durch die sehr gute mechanische und chemische Beständigkeit bei hohen Temperaturen bestens geeignet für den Einsatz im Motorsport und generell im Motorraum von Fahrzeugen. Eben diese Eigenschaften und die Beständigkeit und Elastizität bei extremen Minustemperaturen sind ebenso ideal für Luftfahrt- und Wehrtechnik.
Sales unit: 60 meters
Lieske Part No.: 172133

Quantity: 60 MTR
Sales unit: 60 meters
Lieske Part No.: 846724

Standard wall: higher mechanical strength than thin-walled, more flexible than medium-walled. Highly flexible even at extreme sub-zero temperatures. Well suited for mobile applications. Very good mechanical strength even at high temperatures. Approved for military technology. The rubber-like material offers a high coefficient of friction. High chemical resistance, especially fuel, oil and sea water. SE28 is ideally suited for use in motorsports and generally in the engine compartment of vehicles due to its very good mechanical and chemical resistance at high temperatures. These properties and the resistance and elasticity at extreme sub-zero temperatures are also ideal for aviation and military technology.
Sales unit: 60 meters
Lieske Part No.: 1135046

Quantity: 30 MTR
Sales unit: 30 meters
Lieske Part No.: 554462

Quantity: 30 MTR
Sales unit: 30 meters
Lieske Part No.: 554463

Quantity: 30 MTR
Sales unit: 30 meters
Lieske Part No.: 554939

Standard wall: higher mechanical strength than thin-walled, more flexible than medium-walled. Highly flexible even at extreme sub-zero temperatures. Well suited for mobile applications. Very good mechanical strength even at high temperatures. Approved for military technology. The rubber-like material offers a high coefficient of friction. High chemical resistance, especially fuel, oil and sea water. SE28 is ideally suited for use in motorsports and generally in the engine compartment of vehicles due to its very good mechanical and chemical resistance at high temperatures. These properties and the resistance and elasticity at extreme sub-zero temperatures are also ideal for aviation and military technology.
Sales unit: 30 meters
Lieske Part No.: 1135072

Highly abrasion-resistant and durable. Extremely resistant to high stresses. Retains its good performance properties even at high temperatures and mechanical stress. Resistant to chemicals, especially fuel, oil and sea water. Highly flexible. For the permanent protection of cables and lines in military technology, motorsports and aviation.
Sales unit: 60 meters
Lieske Part No.: 2057351

Hochabriebfest und widerstandsfähig. Extrem beständig bei hohen Beanspruchungen. Behält seine guten Gebrauchseigenschaften auch bei hohen Temperaturen und mechanischer Belastung. Beständig gegen Chemikalien, insbesondere Treibstoff, Öl und Seewasser. Hochflexibel. Zum dauerhaften Schutz von Kabeln und Leitungen in der Wehrtechnik, im Motorsport und in der Luftfahrt.
Sales unit: 30 meters
Lieske Part No.: 172135

Thin-walled: flexible, light, space-saving. Very good fire protection properties. Resistant to chemicals. Good dielectric strength. LVR is a fast-shrinking 2:1 shrink tubing for insulating and repairing cables. The low shrink temperature ensures a quick shrink result and makes the LVR ideal for fast series production.
Sales unit: 250 meters
Lieske Part No.: 667630

Thin-walled: flexible, light, space-saving. Very good fire protection properties. Resistant to chemicals. Good dielectric strength. LVR is a fast-shrinking 2:1 shrink tubing for insulating and repairing cables. The low shrink temperature ensures a quick shrink result and makes the LVR ideal for fast series production.
Sales unit: 250 meters
Lieske Part No.: 326073

Type: LVR-1/4-PVC-BK

Sales unit: 250 meters
Lieske Part No.: 511598

Thin-walled: flexible, light, space-saving. Very good fire protection properties. Resistant to chemicals. Good dielectric strength. LVR is a fast-shrinking 2:1 shrink tubing for insulating and repairing cables. The low shrink temperature ensures a quick shrink result and makes the LVR ideal for fast series production.
Sales unit: 75 meters
Lieske Part No.: 991194

Type: LVR-3/4-PVC-BK

Sales unit: 100 meters
Lieske Part No.: 435588

Thin-walled: flexible, light, space-saving. Very good fire protection properties. Resistant to chemicals. Good dielectric strength. LVR is a fast-shrinking 2:1 shrink tubing for insulating and repairing cables. The low shrink temperature ensures a quick shrink result and makes the LVR ideal for fast series production.
Sales unit: 100 meters
Lieske Part No.: 1232051

Hot melt adhesive tape for assembly or repair with shrink tubing or molded parts. Optimum moisture protection. Halogen-free. For use in conjunction with heat-shrinkable molded parts and tubes. Users usually keep products with and without inner adhesive in stock. However, if shrink products with inner adhesive are only occasionally required, the storage space required and the procurement costs required are too high. HMT200A is the optimal solution: shrink tubing or molded parts with inner adhesive no longer have to be stored separately.
Lieske Part No.: 572585

HIS service station offers space for 6 HIS boxes. Light and stable. Ideal storage at the workplace. Can be attached to the wall. Special scissors make it easier to cut the hoses to length. Practical ruler on the label for precisely cutting shrink tubing sections. HIS offers a complete range of 2:1 and 3:1 shrink tubing in small packages for practical storage in the HIS service station. All HIS shrink tubing is available in 3 m to 10 m lengths in practical dispenser boxes for the HIS service station. This means that the type, color and size of the hoses required can be selected quickly and easily and put together individually.
Lieske Part No.: 684112

ShrinKit 321-A Basic - mit Innenkleber, Artikelnummer: 380-03004
Warmschrumpfschlauchset 3:1 Basic mit Innenkleber schwarz

Eigenschaften:

Schrumpfschlauchset im attraktiven Koffer zur optimalen Montage und Kennzeichnung
Dünnwandige Warmschrumpfschläuche mit heißschmelzendem Innenkleber zum Schutz vor Feuchtigkeit und Korrosion
Transparenten Schläuche zum dauerhaften Schutz von Kennzeichnungslösungen
Weiterverwendung des leeren Koffers zum Aufbewahren von Nägeln, Schrauben usw.



Anwendung
Mit ShrinKit 321 setzt HellermannTyton einen neuen Schrumpfschlauch-Standard: Alle ShrinKit 321-Schläuche decken mit der optimalen Schrumpfrate von 3:1 einen breiten Anwendungsbereich ab.
ShrinKit 321-A Basic - mit Innenkleber ist für folgende Industrie-Branchen geeignet

Elektrogroßhandel
Elektroinstallation
Lieske Part No.: 914439

Thick-walled: very good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic internal adhesive for protection against external influences and for strain relief. Screw connector. Thermochromatic dots (green dots) as shrink indicator. Resistant to chemicals and alkaline earths. High weather resistance. Halogen-free. Packed in a set for easy handling. The LVK-C heat shrink connection set is used for universal connection of unarmored plastic cables and lines made of PVC, PE and VPE (e.g. N(A)YY, NYM, TT). It is suitable for use with press and screw connectors on aluminum and copper cables, nominal voltage 0.6/1.0 (1.2) kV.
Lieske Part No.: 1588244

Thick-walled: very good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic internal adhesive for protection against external influences and for strain relief. Screw connector. Thermochromatic dots (green dots) as shrink indicator. Resistant to chemicals and alkaline earths. High weather resistance. Halogen-free. Packed in a set for easy handling. The LVK-C heat shrink connection set is used for universal connection of unarmored plastic cables and lines made of PVC, PE and VPE (e.g. N(A)YY, NYM, TT). It is suitable for use with press and screw connectors on aluminum and copper cables, nominal voltage 0.6/1.0 (1.2) kV.
Lieske Part No.: 2058486

Thick-walled: very good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic internal adhesive for protection against external influences and for strain relief. Screw connector. Thermochromatic dots (green dots) as shrink indicator. Resistant to chemicals and alkaline earths. High weather resistance. Halogen-free. Packed in a set for easy handling. The LVK-C heat shrink connection set is used for universal connection of unarmored plastic cables and lines made of PVC, PE and VPE (e.g. N(A)YY, NYM, TT). It is suitable for use with press and screw connectors on aluminum and copper cables, nominal voltage 0.6/1.0 (1.2) kV.
Lieske Part No.: 2058487

Steckverbinderendgehäuse than just protection from the elements for circular connectors according to VG. The inner lip is an enhanced strain relief. Form portion 199-4-G for audio plugs has external ribs for improved grip. Type: 152-42-G-PEX-BK item: 1 ST.
Lieske Part No.: 396546

With lip for strain relief for plugs. Mechanical protection for the plug/cable transition. For use with round plugs according to VG standard. Fastening eyelet. Approved for military technology. Optionally with factory-applied thermoplastic inner adhesive for sealing and strain relief. Heat-shrinkable molded parts for use on electrical and electronic cable harnesses.
Sales unit: 10 pieces
Lieske Part No.: 2055170

Steckverbinderendgehäuse than just protection from the elements for circular connectors according to VG. The inner lip is an enhanced strain relief. Form portion 199-4-G for audio plugs has external ribs for improved grip. Type: 153-41-G-PEX-BK item: 50 ST.
Sales unit: 50 pieces
Lieske Part No.: 423378

The molding has excellent properties as a strain relief and mechanical protection type: 154-42-G-PEX-BK item: 1 ST.
Lieske Part No.: 649091

The molding has excellent properties as a strain relief and mechanical protection type:
55-42-G-PEX-BK item:
ST.
Lieske Part No.: 982376

With lip for strain relief for plugs. Mechanical protection for the plug/cable transition. For use with round plugs according to VG standard. Fastening eyelet. Approved for military technology. Optionally with factory-applied thermoplastic inner adhesive for sealing and strain relief. Heat-shrinkable molded parts for use on electrical and electronic cable harnesses.
Sales unit: 100 pieces
Lieske Part No.: 2055171

With lip for strain relief for plugs. Mechanical protection for the plug/cable transition. For use with round plugs according to VG standard. Fastening eyelet. Approved for military technology. Optionally with factory-applied thermoplastic inner adhesive for sealing and strain relief. Heat-shrinkable molded parts for use on electrical and electronic cable harnesses.
Lieske Part No.: 1051655

With lip for strain relief for plugs. Mechanical protection for the plug/cable transition. For use with round plugs according to VG standard. Approved for military technology. Optionally with factory-applied thermoplastic inner adhesive for sealing and strain relief. Heat-shrinkable molded parts for use on electrical and electronic cable harnesses.
Lieske Part No.: 2054898

With lip for strain relief for plugs. Ribs provide increased grip. Mechanical protection for the plug/cable transition. For use with round plugs according to VG standard. Approved for military technology. Optionally with factory-applied thermoplastic inner adhesive for sealing and strain relief. Heat-shrinkable molded parts for use on electrical and electronic cable harnesses.
Sales unit: 100 pieces
Lieske Part No.: 1315009

Type: 203-1-G-PEX-BK

Lieske Part No.: 625974

Easy creation of branches in cable harnesses. Mechanical protection for branching points. Insulation of splices according to VG standard. Bulging: sufficient space for connectors. Approved for military technology. Optionally with factory-applied thermoplastic inner adhesive for sealing and strain relief. Heat-shrinkable molded parts for use on electrical and electronic cable harnesses.
Sales unit: 100 pieces
Lieske Part No.: 1314992

Type: 206-1-G-PEX-BK

Lieske Part No.: 444825

Easy creation of branches in cable harnesses. Mechanical protection for branching points. Insulation of splices according to VG standard. Bulging: sufficient space for connectors. Approved for military technology. Optionally with factory-applied thermoplastic inner adhesive for sealing and strain relief. Heat-shrinkable molded parts for use on electrical and electronic cable harnesses.
Sales unit: 100 pieces
Lieske Part No.: 1580441

Type: 213-1-G-PEX-BK

Sales unit: 100 pieces
Lieske Part No.: 694679

Type: 216-3-B8W

Sales unit: 10 pieces
Lieske Part No.: 450998

Type: 223-2 B8W PEX-BK 1 ST
Lieske Part No.: 459819

Type: 304-1-G-PEX-BK

Sales unit: 100 pieces
Lieske Part No.: 145983

Type: 306-1-G-PEX-BK

Lieske Part No.: 876968

Einfaches Erstellen von Abzweigungen in Kabelbäumen. Mechanischer Schutz für Verzweigstellen. Thermoplastischer Innenkleber zum Schutz gegen äußere Einflüsse und zur Zugentlastung. Bauchig: ausreichend Platz für Verbinder. Kabelausbrüche werden aus einem harten vernetzten Polyolefin mit einem Flammschutzmittel hergestellt. Dieses ermöglicht den Einsatz im Innen- sowie im Außenbereich. Die Formteile bieten hervorragenden elektrischen und mechanischen Schutz. Die mit Innenkleber beschichteten Formteile bieten eine zuverlässige Abdichtung gegenüber Umwelteinflüssen und sind für 2,3,4, 5 und 6 adrige Kabel erhältlich.
Lieske Part No.: 498660