Thin-walled: flexible, lightweight, space-saving. 3:1 covers a larger application area, increased contact pressure. Very good fire protection properties. Fast shrinking. Low shrink temperature. Wide variety of colors and sizes. TF31 is used where increased fire protection requirements are required. It can be used for insulating and sheathing cables and lines.
Sales unit: 30 meters
Lieske Part No.: 2056044

Type: TF31-24/8 PEX BK 30 M

Sales unit: 30 meters
Lieske Part No.: 762743

Dünnwandig: flexibel, leicht, platzsparend. 3:1 deckt größeren Anwendungsbereich ab, erhöhter Anpressdruck. Sehr gute Brandschutzeigenschaften. Schnell schrumpfend. Niedrige Schrumpftemperatur. Große Vielfalt an Farben und Größen. TF31 findet dort Verwendung, wo erhöhte Anforderungen an den Brandschutz gestellt werden. Er kann zur Isolierung und Ummantelung von Kabeln und Leitungen verwendet werden.
Sales unit: 30 meters
Lieske Part No.: 197410

The highly flexible, halogen free heat shrink tubing TF34 provides very good insulation. TF34 is ideal for the protection of identification solutions, because the hose remains transparent even after complete shrinkage. Type: TF34-24 / 8-CL item: 30 MTR
Sales unit: 60 meters
Lieske Part No.: 777116

Quantity: 30 MTR
Sales unit: 30 meters
Lieske Part No.: 197391

The high shrink ratio of TF31 it possible to shrink-large differences in diameter.
Typical applications include the isolation and identification of cables and wires, and protection against duty harnesses. Inventory can be reduced significantly as only a few sizes cover a wide number of cable diameters.
Type: TF31-24 / 8-GN
Quantity: 30 MTR
Sales unit: 30 meters
Lieske Part No.: 497770

Type: TF31-24/8-BU

Sales unit: 30 meters
Lieske Part No.: 900489

Type: TF31-24 / 8 PEX 30 M item: 30 MTR
Sales unit: 30 meters
Lieske Part No.: 524208

Thin-walled: flexible, lightweight, space-saving. 3:1 covers a larger application area, increased contact pressure. Very good fire protection properties. Fast shrinking. Low shrink temperature. Wide variety of colors and sizes. TF31 is used where increased fire protection requirements are required. It can be used for insulating and sheathing cables and lines.
Sales unit: 30 meters
Lieske Part No.: 2056045

The high shrink ratio TF31 of permits for shrink to large differences in diameter. Only six sizes cover cable diameter from 1mm to 33mm, so that a reduced procurement costs and reduced space requirement. TF31 is also characterized by very good fire protection properties and is UL approved RV1. The roles of 30m are particularly suitable for the average needs. Type: TF31-40 / 13-BK-30M item: 30 MTR
Sales unit: 30 meters
Lieske Part No.: 713043

The high shrink ratio TF31 of permits for shrink to large differences in diameter. Typical applications include, among others, the isolation and identification of wires and cables, and protection against light duty harnesses. Inventory can be reduced significantly as only a few sizes cover a wide number of cable diameters. Type: TF31-40 / 13 RD-item: 30 MTR
Sales unit: 30 meters
Lieske Part No.: 817183

Type: TF34-40/13 PEX CL 30 M

Sales unit: 30 meters
Lieske Part No.: 851297

Type: TF31-40/13 PEX YE 30 M

Sales unit: 30 meters
Lieske Part No.: 925263

Type: TF31-40/13 PEX GN 30 M

Sales unit: 30 meters
Lieske Part No.: 679387

The high shrink ratio of TF31 it possible to shrink-large differences in diameter.
Typical applications include the isolation and identification of cables and wires, and protection against duty harnesses. Inventory can be reduced significantly as only a few sizes cover a wide number of cable diameters.
Type: TF31-40 / 13-BU
Quantity: 30 MTR
Sales unit: 30 meters
Lieske Part No.: 658827

Type: TF31-40/13 PEX 30 M

Sales unit: 30 meters
Lieske Part No.: 163778

Type: TF31-40/13 PEX WH 30 M

Sales unit: 30 meters
Lieske Part No.: 157809

Type: TF31-3/1 PEX BK 150 M

Sales unit: 150 meters
Lieske Part No.: 988609

Type: TF31-6/2-BK

Sales unit: 150 meters
Lieske Part No.: 455332

The high shrink ratio TF31 of permits for shrink to large differences in diameter. Typical applications include, among others, the isolation and identification of wires and cables, and protection against light duty harnesses. Inventory can be reduced significantly as only a few sizes cover a wide number of cable diameters. Type: TF31-18 / 6-BK item: 60 MTR
Sales unit: 60 meters
Lieske Part No.: 720933

Quantity: 60 MTR
Sales unit: 60 meters
Lieske Part No.: 910259

Type: TFE2-30-1220-PTFE-CL

Sales unit: 50 pieces
Lieske Part No.: 949548

Type: TFE2-28-1220-PTFE-CL

Sales unit: 50 pieces
Lieske Part No.: 795317

Thin-walled: lightweight, space-saving. Extreme mechanical and chemical resistance at very high temperatures. Very smooth PTFE surface ensures good sliding properties and easy cleaning. TFE2 and TFE4 offer excellent sliding properties coupled with exceptional chemical resistance and a very high operating temperature.
Sales unit: 200 pieces
Lieske Part No.: 1581159

Thin-walled: lightweight, space-saving. Extreme mechanical and chemical resistance at very high temperatures. Very smooth PTFE surface ensures good sliding properties and easy cleaning. TFE2 and TFE4 offer excellent sliding properties coupled with exceptional chemical resistance and a very high operating temperature.
Sales unit: 100 pieces
Lieske Part No.: 562150

Thin-walled: lightweight, space-saving. Extreme mechanical and chemical resistance at very high temperatures. Very smooth PTFE surface ensures good sliding properties and easy cleaning. TFE2 and TFE4 offer excellent sliding properties coupled with exceptional chemical resistance and a very high operating temperature.
Sales unit: 50 pieces
Lieske Part No.: 786736

Thin-walled: lightweight, space-saving. Extreme mechanical and chemical resistance at very high temperatures. Very smooth PTFE surface ensures good sliding properties and easy cleaning. TFE2 and TFE4 offer excellent sliding properties coupled with exceptional chemical resistance and a very high operating temperature.
Sales unit: 100 pieces
Lieske Part No.: 1425856

Type: TFE2-14-1220-PTFE-CL

Sales unit: 50 pieces
Lieske Part No.: 799499

Thin-walled: lightweight, space-saving. Extreme mechanical and chemical resistance at very high temperatures. Very smooth PTFE surface ensures good sliding properties and easy cleaning. TFE2 and TFE4 offer excellent sliding properties coupled with exceptional chemical resistance and a very high operating temperature.
Sales unit: 100 pieces
Lieske Part No.: 935641

Thin-walled: lightweight, space-saving. Extreme mechanical and chemical resistance at very high temperatures. Very smooth PTFE surface ensures good sliding properties and easy cleaning. TFE2 and TFE4 offer excellent sliding properties coupled with exceptional chemical resistance and a very high operating temperature.
Sales unit: 50 pieces
Lieske Part No.: 820598

Thin-walled: lightweight, space-saving. Extreme mechanical and chemical resistance at very high temperatures. Very smooth PTFE surface ensures good sliding properties and easy cleaning. TFE2 and TFE4 offer excellent sliding properties coupled with exceptional chemical resistance and a very high operating temperature.
Sales unit: 50 pieces
Lieske Part No.: 723053

Thin-walled: lightweight, space-saving. Extreme mechanical and chemical resistance at very high temperatures. Very smooth PTFE surface ensures good sliding properties and easy cleaning. TFE2 and TFE4 offer excellent sliding properties coupled with exceptional chemical resistance and a very high operating temperature.
Sales unit: 100 pieces
Lieske Part No.: 997466

Thin-walled: lightweight, space-saving. Extreme mechanical and chemical resistance at very high temperatures. Very smooth PTFE surface ensures good sliding properties and easy cleaning. TFE2 and TFE4 offer excellent sliding properties coupled with exceptional chemical resistance and a very high operating temperature.
Sales unit: 100 pieces
Lieske Part No.: 978918

Type: TFE2-2-1220-PTFE-CL

Sales unit: 100 pieces
Lieske Part No.: 613901

Thin-walled: lightweight, space-saving. Extreme mechanical and chemical resistance at very high temperatures. Very smooth PTFE surface ensures good sliding properties and easy cleaning. TFE2 and TFE4 offer excellent sliding properties coupled with exceptional chemical resistance and a very high operating temperature.
Sales unit: 100 pieces
Lieske Part No.: 1581141

Thin-walled: flexible, lightweight, space-saving. Extreme mechanical and chemical resistance at very high temperatures. Very smooth PTFE surface ensures good sliding properties and easy cleaning. TFE2 and TFE4 offer excellent sliding properties coupled with exceptional chemical resistance and a very high operating temperature.
Sales unit: 50 pieces
Lieske Part No.: 656868

Thin-walled: flexible, lightweight, space-saving. Extreme mechanical and chemical resistance at very high temperatures. Very smooth PTFE surface ensures good sliding properties and easy cleaning. TFE2 and TFE4 offer excellent sliding properties coupled with exceptional chemical resistance and a very high operating temperature.
Sales unit: 200 pieces
Lieske Part No.: 1322059

Thin-walled: flexible, lightweight, space-saving. Extreme mechanical and chemical resistance at very high temperatures. Very smooth PTFE surface ensures good sliding properties and easy cleaning. TFE2 and TFE4 offer excellent sliding properties coupled with exceptional chemical resistance and a very high operating temperature.
Sales unit: 50 pieces
Lieske Part No.: 538640

Thin-walled: flexible, lightweight, space-saving. Extreme mechanical and chemical resistance at very high temperatures. Very smooth PTFE surface ensures good sliding properties and easy cleaning. TFE2 and TFE4 offer excellent sliding properties coupled with exceptional chemical resistance and a very high operating temperature.
Sales unit: 25 pieces
Lieske Part No.: 357044

Thin-walled: flexible, lightweight, space-saving. Extreme mechanical and chemical resistance at very high temperatures. Very smooth PTFE surface ensures good sliding properties and easy cleaning. TFE2 and TFE4 offer excellent sliding properties coupled with exceptional chemical resistance and a very high operating temperature.
Sales unit: 25 pieces
Lieske Part No.: 886434

Thin-walled: flexible, lightweight, space-saving. Extreme mechanical and chemical resistance at very high temperatures. Very smooth PTFE surface ensures good sliding properties and easy cleaning. TFE2 and TFE4 offer excellent sliding properties coupled with exceptional chemical resistance and a very high operating temperature.
Sales unit: 25 pieces
Lieske Part No.: 1581140

Type: TFE4-3/4-1220PTFE-CL

Sales unit: 25 pieces
Lieske Part No.: 798774

Type: TFE4-1 PTFE CL 25 ST

Sales unit: 25 pieces
Lieske Part No.: 994916

Thin-walled: flexible, lightweight, space-saving. Extreme mechanical and chemical resistance at very high temperatures. Very smooth PTFE surface ensures good sliding properties and easy cleaning. TFE2 and TFE4 offer excellent sliding properties coupled with exceptional chemical resistance and a very high operating temperature.
Sales unit: 100 pieces
Lieske Part No.: 489511

Thin-walled: flexible, light, space-saving. 4:1 covers a larger application area, higher contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Very good fire protection properties. Resistant to chemicals. Good dielectric strength. EPS is used in a variety of electronic applications as a seal and protection, such as plugs, connections and branches. Due to the high dielectric strength, EPS provides reliable protection even at higher voltage peaks. EPS-400 offers a higher contact pressure due to the higher shrink ratio.
Sales unit: 100 meters
Lieske Part No.: 1580395

Thin-walled: flexible, light, space-saving. 4:1 covers a larger application area, higher contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Very good fire protection properties. Resistant to chemicals. Good dielectric strength. EPS is used in a variety of electronic applications as a seal and protection, such as plugs, connections and branches. Due to the high dielectric strength, EPS provides reliable protection even at higher voltage peaks. EPS-400 offers a higher contact pressure due to the higher shrink ratio.
Sales unit: 25 meters
Lieske Part No.: 1580394

Thin-walled: flexible, light, space-saving. 4:1 covers a larger application area, higher contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Very good fire protection properties. Resistant to chemicals. Good dielectric strength. EPS is used in a variety of electronic applications as a seal and protection, such as plugs, connections and branches. Due to the high dielectric strength, EPS provides reliable protection even at higher voltage peaks. EPS-400 offers a higher contact pressure due to the higher shrink ratio.
Sales unit: 25 meters
Lieske Part No.: 2054899

Type: EPS400-4/1-PEX-BK

Sales unit: 300 meters
Lieske Part No.: 441212

Type: EPS-400-8/2 PEX BK 150 M

Sales unit: 150 meters
Lieske Part No.: 658910

Thin-walled: flexible, light, space-saving. 4:1 covers a larger application area, higher contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Very good fire protection properties. Resistant to chemicals. Good dielectric strength. EPS is used in a variety of electronic applications as a seal and protection, such as plugs, connections and branches. Due to the high dielectric strength, EPS provides reliable protection even at higher voltage peaks. EPS-400 offers a higher contact pressure due to the higher shrink ratio.
Sales unit: 100 meters
Lieske Part No.: 1580409