Medium wall: good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Resistant to solvents, acids and alkalis. Halogen-free. Packed in a sturdy display box. Barcode labeling per tube for quick and error-free billing. TREDUX MA47 is a medium wall 4:1 shrink tube with thermoplastic inner adhesive. All TREDUX shrink tubes are offered in 1 m lengths in practical boxes for the TREDUX display. TREDUX MA47 is available in 8 sizes from 12 mm to 95 mm in display boxes. Even components with large diameter differences can be shrunk with TREDUX MA47 thanks to the advantageous 4:1 shrink ratio. In addition to resistance to solvents, acids and alkalis, TREDUX MA47 offers good mechanical strength.
Sales unit: 2 pieces
Lieske Part No.: 902620

Viton ®-E is a robust high performance hose of very flexible fluoroelastomer, which is characterized by extremely high temperature resistance. It remains flexible even at low temperatures. It has excellent electrical, chemical and mechanical properties and is resistant to fuels and lubricants. The hose is VG-approved. Type: VITONE-1/8-FPM-BK item: 50 MTR
Sales unit: 50 meters
Lieske Part No.: 393900

Viton ®-E is a robust high performance pants of very flexible fluoroelastomer, Which is Characterized by extremely high temperature resistance. It remains flexible even at low temperatures. It has excellent electrical, chemical and mechanical properties and is resistant to fuels and lubricants. The pant is VG-approved. Type: VITONE-1/4-FPM-BK item: 50 MTR
Sales unit: 50 meters
Lieske Part No.: 694580

Viton ®-E is a robust high performance hose of very flexible fluoroelastomer, which is characterized by extremely high temperature resistance. It remains flexible even at low temperatures. It has excellent electrical, chemical and mechanical properties and is resistant to fuels and lubricants. The hose is VG-approved. Type: VITONE-3/8-FPM-BK item: 25 MTR
Sales unit: 25 meters
Lieske Part No.: 390590

Standard wall (between thin and medium wall). Excellent mechanical and chemical resistance at very high temperatures. Highly resistant to fuels and lubricants. Very good fire protection properties. Approved for military technology. Viton-E is ideally suited for use in motorsports and generally in the engine compartment of vehicles due to its excellent mechanical and chemical resistance at high temperatures. Due to its excellent properties under extreme loads, the shrink tubing can be used in many different ways, e.g. in aviation and military technology.
Sales unit: 25 meters
Lieske Part No.: 524196

Viton ®-E is a robust high performance hose of very flexible fluoroelastomer, which is characterized by extremely high temperature resistance. It remains flexible even at low temperatures. It has excellent electrical, chemical and mechanical properties and is resistant to fuels and lubricants. The hose is VG-approved. Type: VITONE-3/4-FPM-BK item: 25 MTR
Sales unit: 25 meters
Lieske Part No.: 879057

Viton ®-E is a robust high performance hose of very flexible fluoroelastomer, which is characterized by extremely high temperature resistance. It remains flexible even at low temperatures. It has excellent electrical, chemical and mechanical properties and is resistant to fuels and lubricants. The hose is VG-approved. Type: VITONE-
FPM-BK-item: 25 MTR
Sales unit: 25 meters
Lieske Part No.: 803711

Viton ®-E is a robust high performance hose of very flexible fluoroelastomer, which is characterized by extremely high temperature resistance. It remains flexible even at low temperatures. It has excellent electrical, chemical and mechanical properties and is resistant to fuels and lubricants. The hose is VG-approved. Type: VITONE-2-FPM-BK Quantity:
5 MTR
Sales unit: 75 meters
Lieske Part No.: 806931

Quantity: 25 ST.
Sales unit: 125 pieces
Lieske Part No.: 914894

Type: TF31-1.5/0.5 PEX BK 300 M

Sales unit: 300 meters
Lieske Part No.: 132971

Thin-walled: flexible, lightweight, space-saving. 3:1 covers a larger application area, increased contact pressure. Very good fire protection properties. Fast shrinking. Low shrink temperature. Wide variety of colors and sizes. TF31 is used where increased fire protection requirements are required. It can be used for insulating and sheathing cables and lines.
Sales unit: 150 meters
Lieske Part No.: 2055817

Type: TF31-12/4 PEX BK 100 M

Sales unit: 100 meters
Lieske Part No.: 854495

Type: TF31-40/13 PEX BK 60 M

Sales unit: 60 meters
Lieske Part No.: 356838

Dünnwandig: flexibel, leicht, platzsparend. 3:1 deckt größeren Anwendungsbereich ab, erhöhter Anpressdruck. Sehr gute Brandschutzeigenschaften. Schnell schrumpfend. Niedrige Schrumpftemperatur. Große Vielfalt an Farben und Größen. TF31 findet dort Verwendung, wo erhöhte Anforderungen an den Brandschutz gestellt werden. Er kann zur Isolierung und Ummantelung von Kabeln und Leitungen verwendet werden.
Sales unit: 30 meters
Lieske Part No.: 221321

Thin-walled: flexible, lightweight, space-saving. 3:1 covers a larger application area, increased contact pressure. Very good fire protection properties. Fast shrinking. Low shrink temperature. Wide variety of colors and sizes. TF31 is used where increased fire protection requirements are required. It can be used for insulating and sheathing cables and lines.
Sales unit: 30 meters
Lieske Part No.: 1324302

Thin-walled: flexible, light, space-saving. 3:1 covers a larger application area, increased contact pressure. Transparent even after complete shrinkage. Good mechanical and chemical resistance. Protects markings optimally. High dielectric strength. Halogen-free. TF34 is ideal for protecting markings and remains transparent even after complete shrinkage. Possible mechanical and chemical damage to the markings is prevented and the marking remains legible for longer.
Sales unit: 30 meters
Lieske Part No.: 1241691

Thin-walled: flexible, lightweight, space-saving. 3:1 covers a larger application area, increased contact pressure. Very good fire protection properties. Fast shrinking. Low shrink temperature. Wide variety of colors and sizes. TF31 is used where increased fire protection requirements are required. It can be used for insulating and sheathing cables and lines.
Sales unit: 30 meters
Lieske Part No.: 1565144

Thin-walled: flexible, lightweight, space-saving. 3:1 covers a larger application area, increased contact pressure. Very good fire protection properties. Fast shrinking. Low shrink temperature. Wide variety of colors and sizes. TF31 is used where increased fire protection requirements are required. It can be used for insulating and sheathing cables and lines.
Sales unit: 30 meters
Lieske Part No.: 1241690

The high shrink ratio of TF3
it possible to shrink-large diameter differences. Only six sizes cover cable diameter
mm from up to 33mm, so that a reduced procurement costs and reduced space requirement results. TF3
is also characterized by good fire-protection properties and is UL VW
admitted.The roles of 3 m are particularly suitable for the average needs. Type: TF3
-3 /
3-BK-M item: 3 MTR
Sales unit: 30 meters
Lieske Part No.: 105374

The high shrink ratio of TF31 it possible to shrink-large differences in diameter.
Typical applications include the isolation and identification of cables and wires, and protection against duty harnesses. Inventory can be reduced significantly as only a few sizes cover a wide number of cable diameters.
Type: TF31-3 / 1-RD
Quantity: 30 MTR
Sales unit: 30 meters
Lieske Part No.: 367817

Thin-walled: flexible, light, space-saving. 3:1 covers a larger application area, increased contact pressure. Transparent even after complete shrinkage. Good mechanical and chemical resistance. Protects markings optimally. High dielectric strength. Halogen-free. TF34 is ideal for protecting markings and remains transparent even after complete shrinkage. Possible mechanical and chemical damage to the markings is prevented and the marking remains legible for longer.
Sales unit: 150 meters
Lieske Part No.: 977087

Type: TF31-3/1 PEX YE 30 M

Sales unit: 30 meters
Lieske Part No.: 664936

The high shrink ratio of TF31 it possible to shrink-large differences in diameter.
Typical applications include the isolation and identification of cables and wires, and protection against duty harnesses. Inventory can be reduced significantly as only a few sizes cover a wide number of cable diameters.
Type: TF31-3 / 1-GN
Quantity: 30 MTR
Sales unit: 30 meters
Lieske Part No.: 137345

Type: TF3
-3 /
PEX BU 3 M item: 3 MTR
Sales unit: 30 meters
Lieske Part No.: 930349

Quantity: 30 MTR
Sales unit: 150 meters
Lieske Part No.: 932969

Thin-walled: flexible, lightweight, space-saving. 3:1 covers a larger application area, increased contact pressure. Very good fire protection properties. Fast shrinking. Low shrink temperature. Wide variety of colors and sizes. TF31 is used where increased fire protection requirements are required. It can be used for insulating and sheathing cables and lines.
Sales unit: 30 meters
Lieske Part No.: 1241689

The high shrink ratio TF31 of permits for shrink to large differences in diameter. Only six sizes cover cable diameter from 1mm to 33mm, so that a reduced procurement costs and reduced space requirement. TF31 is also characterized by very good fire protection properties and is UL approved RV1. The roles of 30m are particularly suitable for the average needs. Type: TF31-6 / 2-BK-30M item: 30 MTR
Sales unit: 30 meters
Lieske Part No.: 669537

Thin-walled: flexible, lightweight, space-saving. 3:1 covers a larger application area, increased contact pressure. Very good fire protection properties. Fast shrinking. Low shrink temperature. Wide variety of colors and sizes. TF31 is used where increased fire protection requirements are required. It can be used for insulating and sheathing cables and lines.
Sales unit: 30 meters
Lieske Part No.: 2056041

The highly flexible, halogen-free heat-shrink tubing TF34 has very good insulating properties. TF34 is optimal for protecting identification solutions, as the hose remains transparent even after complete shrinkage.
Type: TF34-6 / 2-CL
Quantity: 30 MTR
Sales unit: 60 meters
Lieske Part No.: 921016

Type: TF31-6 / 2 PEX YE 30 M item: 30 MTR
Sales unit: 30 meters
Lieske Part No.: 769546

Dünnwandig: flexibel, leicht, platzsparend. 3:1 deckt größeren Anwendungsbereich ab, erhöhter Anpressdruck. Sehr gute Brandschutzeigenschaften. Schnell schrumpfend. Niedrige Schrumpftemperatur. Große Vielfalt an Farben und Größen. TF31 findet dort Verwendung, wo erhöhte Anforderungen an den Brandschutz gestellt werden. Er kann zur Isolierung und Ummantelung von Kabeln und Leitungen verwendet werden.
Sales unit: 30 meters
Lieske Part No.: 973420

Thin-walled: flexible, lightweight, space-saving. 3:1 covers a larger application area, increased contact pressure. Very good fire protection properties. Fast shrinking. Low shrink temperature. Wide variety of colors and sizes. TF31 is used where increased fire protection requirements are required. It can be used for insulating and sheathing cables and lines.
Sales unit: 30 meters
Lieske Part No.: 1565143

Dünnwandig: flexibel, leicht, platzsparend. 3:1 deckt größeren Anwendungsbereich ab, erhöhter Anpressdruck. Sehr gute Brandschutzeigenschaften. Schnell schrumpfend. Niedrige Schrumpftemperatur. Große Vielfalt an Farben und Größen. TF31 findet dort Verwendung, wo erhöhte Anforderungen an den Brandschutz gestellt werden. Er kann zur Isolierung und Ummantelung von Kabeln und Leitungen verwendet werden.
Sales unit: 30 meters
Lieske Part No.: 500224

The high shrink ratio of TF31 it possible to shrink-large diameter differences.
Typical applications include the isolation and identification of cables and wires, and protection against duty harnesses. Inventory can be reduced significantly as only a few sizes cover a wide number of cable diameters.
Type: TF31-6 / 2-WH
Quantity: 30 MTR
Sales unit: 30 meters
Lieske Part No.: 550888

The high shrink ratio TF31 of Permits to shrink-large diameter differences. Only six sizes cover cable Diameters from 1mm to 33mm, so did a reduced procurement costs and reduced space requirement results. TF31 is so Characterized by good fire-protection properties and is UL . approved RV1 . The rolls of 30m are particularly suitable for the average needs Type: TF31-9/3 item: 30 MTR
Sales unit: 30 meters
Lieske Part No.: 161045

Type: TF34-9/3 PEX CL 30 M

Sales unit: 60 meters
Lieske Part No.: 985522

Type: TF31-9/3-YE

Sales unit: 30 meters
Lieske Part No.: 821537

Dünnwandig: flexibel, leicht, platzsparend. 3:1 deckt größeren Anwendungsbereich ab, erhöhter Anpressdruck. Sehr gute Brandschutzeigenschaften. Schnell schrumpfend. Niedrige Schrumpftemperatur. Große Vielfalt an Farben und Größen. TF31 findet dort Verwendung, wo erhöhte Anforderungen an den Brandschutz gestellt werden. Er kann zur Isolierung und Ummantelung von Kabeln und Leitungen verwendet werden.
Sales unit: 30 meters
Lieske Part No.: 500225

Type: TF31-9/3 30 M BU PEX item: 30 MTR
Sales unit: 30 meters
Lieske Part No.: 252076

Quantity: 30 MTR
Sales unit: 30 meters
Lieske Part No.: 938487

Thin-walled: flexible, lightweight, space-saving. 3:1 covers a larger application area, increased contact pressure. Very good fire protection properties. Fast shrinking. Low shrink temperature. Wide variety of colors and sizes. TF31 is used where increased fire protection requirements are required. It can be used for insulating and sheathing cables and lines.
Sales unit: 30 meters
Lieske Part No.: 2056042

Type: TF31-12/4-BK-30M

Sales unit: 30 meters
Lieske Part No.: 797607

Quantity: 30 MTR
Sales unit: 30 meters
Lieske Part No.: 472408

The highly flexible, halogen-free heat-shrink tubing TF34 has very good insulating properties. TF34 is optimal for protecting identification solutions, as the hose remains transparent even after complete shrinkage.
Type: TF34-12 / 4-CL
Quantity: 30 MTR
Sales unit: 60 meters
Lieske Part No.: 353148

The high shrink ratio of TF31 it possible to shrink-large differences in diameter.
Typical applications include the isolation and identification of cables and wires, and protection against duty harnesses. Inventory can be reduced significantly as only a few sizes cover a wide number of cable diameters.
Type: TF31-12 / 4-YE
Quantity: 30 MTR
Sales unit: 30 meters
Lieske Part No.: 564677

Dünnwandig: flexibel, leicht, platzsparend. 3:1 deckt größeren Anwendungsbereich ab, erhöhter Anpressdruck. Sehr gute Brandschutzeigenschaften. Schnell schrumpfend. Niedrige Schrumpftemperatur. Große Vielfalt an Farben und Größen. TF31 findet dort Verwendung, wo erhöhte Anforderungen an den Brandschutz gestellt werden. Er kann zur Isolierung und Ummantelung von Kabeln und Leitungen verwendet werden.
Sales unit: 30 meters
Lieske Part No.: 197720

Thin-walled: flexible, lightweight, space-saving. 3:1 covers a larger application area, increased contact pressure. Very good fire protection properties. Fast shrinking. Low shrink temperature. Wide variety of colors and sizes. TF31 is used where increased fire protection requirements are required. It can be used for insulating and sheathing cables and lines.
Sales unit: 30 meters
Lieske Part No.: 1324301

Type: TF31-12/4 PEX 30 M

Sales unit: 30 meters
Lieske Part No.: 456000

Type: TF31-12/4 PEX WH 30 M

Sales unit: 30 meters
Lieske Part No.: 735091

The high shrink ratio of TF31 it possible to shrink-large diameter differences. But six sizes cover cable diameters from 1mm to 33mm, so that a reduced procurement costs and reduced space requirement results. TF31 is also characterized by very good fire protection properties and is approved according to UL VW1. The rolls of 30m are particularly suitable for the average needs.
Type: TF31-18 / 6-BK-30M
Quantity: 30 MTR
Sales unit: 30 meters
Lieske Part No.: 996550