Type: TK20-25.4 / 12.7 PVDF CL 15 ST
Sales unit: 15 pieces
Lieske Part No.: 292927

TK20, item number: 311-03819
Heat shrink tubing 2:1 transparent
Properties:
Highly transparent, semi-rigid heat shrink tubing TK20
Thin-walled and resistant
Self-extinguishing
For higher operating temperatures
Very good mechanical strength
Good chemical resistance
Meets various industry standards
Sections 1.2 m long
Application
This heat shrink tubing is used for insulation and protection used against mechanical stress, especially at high temperatures. It also offers protection for cable connections and solder joints, but also for fragile objects such as glass bodies, pipettes or fluorescent tubes. This is particularly the case when additional chemicals are used.
TK20 is suitable for the following industrial sectors:
electrical wholesale
, defense industry
Sales unit: 10 pieces
Lieske Part No.: 148513

Dünnwandig: leicht, platzsparend. Gute mechanische Festigkeit durch halbsteifes Material. Hochtransparent auch nach vollständiger Schrumpfung. Sehr gute Brandschutzeigenschaften. Sehr gute mechanische und chemische Beständigkeit bei hohen Temperaturen. Zulassung für Wehrtechnik. TK20 wird zur Isolierung und zum Schutz vor mechanischer und chemischer Beanspruchung, besonders bei hohen Temperaturen, verwendet. TK20 schützt auch Leitungsverbindungen und Lötstellen, sowie zerbrechliche Objekte, wie beispielsweise Glaskörper, Pipetten oder Leuchtstoffröhren.
Lieske Part No.: 149147

Thin-walled: flexible, light, space-saving. 3:1 covers a larger application area, increased contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Very good fire protection properties. Very low development of toxic gases in the event of a fire. Approved for rail vehicles. Halogen-free. TA37 is used where there are special requirements for the fire behavior of materials and components. This is the case in buildings and means of transport with high concentrations of people, material assets or safety requirements. These include, for example, rail vehicles, tunnel systems, hospitals, airport buildings, schools, elevator systems, etc. The factory-applied inner adhesive protects cable connections and plugs against moisture and dust.
Sales unit: 50 pieces
Lieske Part No.: 1331568

Dünnwandig: flexibel, leicht, platzsparend. 3:1 deckt größeren Anwendungsbereich ab, erhöhter Anpressdruck. Thermoplastischer Innenkleber zum Schutz gegen äußere Einflüsse und zur Zugentlastung. Sehr gute Brandschutzeigenschaften. Sehr niedrige Entwicklung giftiger Gase im Brandfall. Zulassung für Schienenfahrzeuge. Halogenfrei. TA37 wird dort eingesetzt, wo es besondere Anforderungen an das Brandverhalten von Materialien und Komponenten gibt. Dies ist in Gebäuden und Verkehrsmitteln mit hohen Personenkonzentrationen, Sachwerten oder Sicherheitsanforderungen der Fall. Hierzu gehören zum Beispiel Schienenfahrzeuge, Tunnelanlagen, Krankenhäuser, Flughafengebäude, Schulen, Aufzugsanlagen etc. Durch den werkseitig eingebrachten Innenkleber werden Kabelverbindungen und Stecker gegen Feuchtigkeit und Staub geschützt.
Sales unit: 50 pieces
Lieske Part No.: 2144408

Thin-walled: flexible, light, space-saving. 3:1 covers a larger application area, increased contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Very good fire protection properties. Very low development of toxic gases in the event of a fire. Approved for rail vehicles. Halogen-free. TA37 is used where there are special requirements for the fire behavior of materials and components. This is the case in buildings and means of transport with high concentrations of people, material assets or safety requirements. These include, for example, rail vehicles, tunnel systems, hospitals, airport buildings, schools, elevator systems, etc. The factory-applied inner adhesive protects cable connections and plugs against moisture and dust.
Sales unit: 50 pieces
Lieske Part No.: 989832

Thin-walled: flexible, light, space-saving. 3:1 covers a larger application area, increased contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Very good fire protection properties. Very low development of toxic gases in the event of a fire. Approved for rail vehicles. Halogen-free. TA37 is used where there are special requirements for the fire behavior of materials and components. This is the case in buildings and means of transport with high concentrations of people, material assets or safety requirements. These include, for example, rail vehicles, tunnel systems, hospitals, airport buildings, schools, elevator systems, etc. The factory-applied inner adhesive protects cable connections and plugs against moisture and dust.
Sales unit: 25 pieces
Lieske Part No.: 2057352

Thin-walled: flexible, light, space-saving. 3:1 covers a larger application area, increased contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Very good fire protection properties. Very low development of toxic gases in the event of a fire. Approved for rail vehicles. Halogen-free. TA37 is used where there are special requirements for the fire behavior of materials and components. This is the case in buildings and means of transport with high concentrations of people, material assets or safety requirements. These include, for example, rail vehicles, tunnel systems, hospitals, airport buildings, schools, elevator systems, etc. The factory-applied inner adhesive protects cable connections and plugs against moisture and dust.
Sales unit: 25 pieces
Lieske Part No.: 1331567

Thin-walled: flexible, light, space-saving. 3:1 covers a larger application area, increased contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Very good fire protection properties. Very low development of toxic gases in the event of a fire. Approved for rail vehicles. Halogen-free. TA37 is used where there are special requirements for the fire behavior of materials and components. This is the case in buildings and means of transport with high concentrations of people, material assets or safety requirements. These include, for example, rail vehicles, tunnel systems, hospitals, airport buildings, schools, elevator systems, etc. The factory-applied inner adhesive protects cable connections and plugs against moisture and dust.
Sales unit: 15 pieces
Lieske Part No.: 1135082

Dünnwandig: flexibel, leicht, platzsparend. 3:1 deckt größeren Anwendungsbereich ab, erhöhter Anpressdruck. Thermoplastischer Innenkleber zum Schutz gegen äußere Einflüsse und zur Zugentlastung. Sehr gute Brandschutzeigenschaften. Sehr niedrige Entwicklung giftiger Gase im Brandfall. Zulassung für Schienenfahrzeuge. Halogenfrei. TA37 wird dort eingesetzt, wo es besondere Anforderungen an das Brandverhalten von Materialien und Komponenten gibt. Dies ist in Gebäuden und Verkehrsmitteln mit hohen Personenkonzentrationen, Sachwerten oder Sicherheitsanforderungen der Fall. Hierzu gehören zum Beispiel Schienenfahrzeuge, Tunnelanlagen, Krankenhäuser, Flughafengebäude, Schulen, Aufzugsanlagen etc. Durch den werkseitig eingebrachten Innenkleber werden Kabelverbindungen und Stecker gegen Feuchtigkeit und Staub geschützt.
Lieske Part No.: 511041

Dünnwandig: flexibel, leicht, platzsparend. 3:1 deckt größeren Anwendungsbereich ab, erhöhter Anpressdruck. Thermoplastischer Innenkleber zum Schutz gegen äußere Einflüsse und zur Zugentlastung. Sehr gute Brandschutzeigenschaften. Sehr niedrige Entwicklung giftiger Gase im Brandfall. Zulassung für Schienenfahrzeuge. Halogenfrei. TA37 wird dort eingesetzt, wo es besondere Anforderungen an das Brandverhalten von Materialien und Komponenten gibt. Dies ist in Gebäuden und Verkehrsmitteln mit hohen Personenkonzentrationen, Sachwerten oder Sicherheitsanforderungen der Fall. Hierzu gehören zum Beispiel Schienenfahrzeuge, Tunnelanlagen, Krankenhäuser, Flughafengebäude, Schulen, Aufzugsanlagen etc. Durch den werkseitig eingebrachten Innenkleber werden Kabelverbindungen und Stecker gegen Feuchtigkeit und Staub geschützt.
Lieske Part No.: 637742

Thin-walled: flexible, light, space-saving. 3:1 covers a larger application area, increased contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Very good fire protection properties. Very low development of toxic gases in the event of a fire. Approved for rail vehicles. Halogen-free. TA37 is used where there are special requirements for the fire behavior of materials and components. This is the case in buildings and means of transport with high concentrations of people, material assets or safety requirements. These include, for example, rail vehicles, tunnel systems, hospitals, airport buildings, schools, elevator systems, etc. The factory-applied inner adhesive protects cable connections and plugs against moisture and dust.
Sales unit: 5 pieces
Lieske Part No.: 1135081

Thin-walled: flexible, light, space-saving. 3:1 covers a larger application area, increased contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Very good fire protection properties. Very low development of toxic gases in the event of a fire. Approved for rail vehicles. Halogen-free. TA37 is used where there are special requirements for the fire behavior of materials and components. This is the case in buildings and means of transport with high concentrations of people, material assets or safety requirements. These include, for example, rail vehicles, tunnel systems, hospitals, airport buildings, schools, elevator systems, etc. The factory-applied inner adhesive protects cable connections and plugs against moisture and dust.
Lieske Part No.: 1129380

Type: TR27-3.2/1.6 PEX BK 150 M

Sales unit: 150 meters
Lieske Part No.: 542519

Type: TR27-4.8/2.4 PEX BK 60 M

Sales unit: 60 meters
Lieske Part No.: 999548

The thin-walled, halogen free heat shrink tube TR27 is self-extinguishing and has excellent fire retardant properties. Available in versions with and without adhesive. Also available as a thick-walled version SR27. Type: TR27-6.4/3.2 PEX BK 6 M Pack: 6 MTR
Sales unit: 60 meters
Lieske Part No.: 701444

Type: TR27-9.5/4.8 PEX BK 60 M

Sales unit: 60 meters
Lieske Part No.: 749992

Dünnwandig: flexibel, leicht, platzsparend. Sehr gute Brandschutzeigenschaften. Sehr niedrige Entwicklung giftiger Gase im Brandfall. Zulassung für Schienenfahrzeuge. Halogenfrei. TR27 wird dort eingesetzt, wo es besondere Anforderungen an das Brandverhalten von Materialien und Komponenten gibt. Dies ist in Gebäuden und Verkehrsmitteln mit hohen Personenkonzentrationen, Sachwerten oder Sicherheitsanforderungen der Fall. Hierzu gehören zum Beispiel Schienenfahrzeuge, Tunnelanlagen, Krankenhäuser, Flughafengebäude, Schulen, Aufzugsanlagen etc.
Sales unit: 60 meters
Lieske Part No.: 636257

Thin-walled: flexible, light, space-saving. Very good fire protection properties. Very low development of toxic gases in the event of a fire. Approved for rail vehicles. Halogen-free. TR27 is used where there are special requirements for the fire behavior of materials and components. This is the case in buildings and means of transport with high concentrations of people, material assets or safety requirements. These include, for example, rail vehicles, tunnels, hospitals, airport buildings, schools, elevators, etc.
Sales unit: 60 meters
Lieske Part No.: 1316444

Thin-walled: flexible, light, space-saving. Very good fire protection properties. Very low development of toxic gases in the event of a fire. Approved for rail vehicles. Halogen-free. TR27 is used where there are special requirements for the fire behavior of materials and components. This is the case in buildings and means of transport with high concentrations of people, material assets or safety requirements. These include, for example, rail vehicles, tunnels, hospitals, airport buildings, schools, elevators, etc.
Sales unit: 60 meters
Lieske Part No.: 2055168

Dünnwandig: flexibel, leicht, platzsparend. Sehr gute Brandschutzeigenschaften. Sehr niedrige Entwicklung giftiger Gase im Brandfall. Zulassung für Schienenfahrzeuge. Halogenfrei. TR27 wird dort eingesetzt, wo es besondere Anforderungen an das Brandverhalten von Materialien und Komponenten gibt. Dies ist in Gebäuden und Verkehrsmitteln mit hohen Personenkonzentrationen, Sachwerten oder Sicherheitsanforderungen der Fall. Hierzu gehören zum Beispiel Schienenfahrzeuge, Tunnelanlagen, Krankenhäuser, Flughafengebäude, Schulen, Aufzugsanlagen etc.
Sales unit: 60 meters
Lieske Part No.: 636261

Type: TA32-3/1-1200-BK

Sales unit: 500 pieces
Lieske Part No.: 810652

Type: TA32-4.5/1.5-1200-BK

Sales unit: 250 pieces
Lieske Part No.: 472880

This heat shrink tubing are coated with adhesive and provide an excellent seal against moisture. Both hoses are approved UL224.
Type: TA32-6 / 2 PEX BK 250 ST
Quantity: 250 ST.
Sales unit: 250 pieces
Lieske Part No.: 342541

Type: TA32-9/3 PEX BK 125 ST

Sales unit: 125 pieces
Lieske Part No.: 981422

This heat shrink tubing are coated with adhesive and provide an excellent seal against moisture. Both hoses are approved UL224. Type: TA32-12 / 4 PEX BK 125 ST Package: 125 ST.
Sales unit: 125 pieces
Lieske Part No.: 399644

This heat shrink tubing are coated with adhesive and provide an excellent seal against moisture. Both hoses are approved UL224. Type: TA32-18 / 6 to 1200-BK item: 75 ST.
Sales unit: 75 pieces
Lieske Part No.: 524135

Quantity: 75 ST.
Sales unit: 75 pieces
Lieske Part No.: 910255

Quantity: 10 ST.
Sales unit: 10 pieces
Lieske Part No.: 197723

This heat shrink tubing coated coated with adhesive and provide an excellent seal against moisture. Both hoses are approved UL224.
Type: TA42-4 / 1-1200-BK
Quantity: 250 ST.
Sales unit: 250 pieces
Lieske Part No.: 200560

This heat shrink tubing are coated coated with adhesive and provide an excellent seal against moisture. Both hoses are approved UL224. Type: TA42-8 / 2-1200 BK-item: 125 ST.
Sales unit: 125 pieces
Lieske Part No.: 208925

This heat shrink tubing are coated coated with adhesive and provide an excellent seal against moisture. Both hoses are approved UL224. Type: TA42-12 / 3 PEX BK 125 ST Package: 125 ST.
Sales unit: 125 pieces
Lieske Part No.: 508751

This heat shrink tubing coated coated with adhesive and provide an excellent seal against moisture. Both hoses are approved UL224.
Type: TA42-16 / 4 PEX BK 125 ST
Quantity: 125 ST.
Sales unit: 125 pieces
Lieske Part No.: 322086

This heat shrink tubing are coated coated with adhesive and provide an excellent seal against moisture. Both hoses are approved UL224. Type: TA42-24 / 6 PEX BK 75 ST Package: 75 ST.
Sales unit: 75 pieces
Lieske Part No.: 681094

This heat shrink tubing coated coated with adhesive and provide an excellent seal against moisture. Both hoses are approved UL224.
Type: TA42-32 / 8 PEX BK 10 ST
Quantity: 10 ST.
Sales unit: 10 pieces
Lieske Part No.: 394488

This heat shrink tubing coated coated with adhesive and provide an excellent seal against moisture. Both hoses are approved UL224.
Type: TA42-52 / 13 PEX BK 10 ST
Quantity: 10 ST.
Sales unit: 10 pieces
Lieske Part No.: 320433

Thin-walled: flexible, light, space-saving. 3:1 covers a larger application area, increased contact pressure. Very good fire protection properties. Resistant to solvents, acids and alkalis. Packed in sturdy display boxes, TREDUX enables individual combination of the desired hose sizes. Barcode marking per hose for quick and error-free billing. TREDUX is a thin-walled, flexible shrink tubing with a shrink rate of 2:1 and 3:1. All TREDUX shrink tubing is offered in 1 m lengths in practical boxes for the TREDUX display. TREDUX is available in 9 sizes from 1.5 mm to 101.6 mm in the colors black and green-yellow in a display box. Even components with large diameter differences can be shrunk with TREDUX thanks to the advantageous 3:1 shrink rate.
Sales unit: 20 pieces
Lieske Part No.: 401854

Thin-walled: flexible, light, space-saving. 3:1 covers a larger application area, increased contact pressure. Very good fire protection properties. Resistant to solvents, acids and alkalis. Packed in sturdy display boxes, TREDUX enables individual combination of the desired hose sizes. Barcode marking per hose for quick and error-free billing. TREDUX is a thin-walled, flexible shrink tubing with a shrink rate of 2:1 and 3:1. All TREDUX shrink tubing is offered in 1 m lengths in practical boxes for the TREDUX display. TREDUX is available in 9 sizes from 1.5 mm to 101.6 mm in the colors black and green-yellow in a display box. Even components with large diameter differences can be shrunk with TREDUX thanks to the advantageous 3:1 shrink rate.
Sales unit: 20 pieces
Lieske Part No.: 248047

Thin-walled: flexible, light, space-saving. 3:1 covers a larger application area, increased contact pressure. Very good fire protection properties. Resistant to solvents, acids and alkalis. Packed in sturdy display boxes, TREDUX enables individual combination of the desired hose sizes. Barcode marking per hose for quick and error-free billing. TREDUX is a thin-walled, flexible shrink tubing with a shrink rate of 2:1 and 3:1. All TREDUX shrink tubing is offered in 1 m lengths in practical boxes for the TREDUX display. TREDUX is available in 9 sizes from 1.5 mm to 101.6 mm in the colors black and green-yellow in a display box. Even components with large diameter differences can be shrunk with TREDUX thanks to the advantageous 3:1 shrink rate.
Sales unit: 20 pieces
Lieske Part No.: 686438

Thin-walled: flexible, light, space-saving. 3:1 covers a larger application area, increased contact pressure. Very good fire protection properties. Resistant to solvents, acids and alkalis. Packed in sturdy display boxes, TREDUX enables individual combination of the desired hose sizes. Barcode marking per hose for quick and error-free billing. TREDUX is a thin-walled, flexible shrink tubing with a shrink rate of 2:1 and 3:1. All TREDUX shrink tubing is offered in 1 m lengths in practical boxes for the TREDUX display. TREDUX is available in 9 sizes from 1.5 mm to 101.6 mm in the colors black and green-yellow in a display box. Even components with large diameter differences can be shrunk with TREDUX thanks to the advantageous 3:1 shrink rate.
Lieske Part No.: 230004

Thin-walled: flexible, light, space-saving. 3:1 covers a larger application area, increased contact pressure. Very good fire protection properties. Resistant to solvents, acids and alkalis. Packed in sturdy display boxes, TREDUX enables individual combination of the desired hose sizes. Barcode marking per hose for quick and error-free billing. TREDUX is a thin-walled, flexible shrink tubing with a shrink rate of 2:1 and 3:1. All TREDUX shrink tubing is offered in 1 m lengths in practical boxes for the TREDUX display. TREDUX is available in 9 sizes from 1.5 mm to 101.6 mm in the colors black and green-yellow in a display box. Even components with large diameter differences can be shrunk with TREDUX thanks to the advantageous 3:1 shrink rate.
Lieske Part No.: 914786

Thin-walled: flexible, light, space-saving. 3:1 covers a larger application area, increased contact pressure. Very good fire protection properties. Resistant to solvents, acids and alkalis. Packed in sturdy display boxes, TREDUX enables individual combination of the desired hose sizes. Barcode marking per hose for quick and error-free billing. TREDUX is a thin-walled, flexible shrink tubing with a shrink rate of 2:1 and 3:1. All TREDUX shrink tubing is offered in 1 m lengths in practical boxes for the TREDUX display. TREDUX is available in 9 sizes from 1.5 mm to 101.6 mm in the colors black and green-yellow in a display box. Even components with large diameter differences can be shrunk with TREDUX thanks to the advantageous 3:1 shrink rate.
Sales unit: 15 pieces
Lieske Part No.: 194854

Thin-walled: flexible, light, space-saving. 3:1 covers a larger application area, increased contact pressure. Very good fire protection properties. Resistant to solvents, acids and alkalis. Packed in sturdy display boxes, TREDUX enables individual combination of the desired hose sizes. Barcode marking per hose for quick and error-free billing. TREDUX is a thin-walled, flexible shrink tubing with a shrink rate of 2:1 and 3:1. All TREDUX shrink tubing is offered in 1 m lengths in practical boxes for the TREDUX display. TREDUX is available in 9 sizes from 1.5 mm to 101.6 mm in the colors black and green-yellow in a display box. Even components with large diameter differences can be shrunk with TREDUX thanks to the advantageous 3:1 shrink rate.
Lieske Part No.: 275822

Thin-walled: flexible, light, space-saving. 3:1 covers a larger application area, increased contact pressure. Very good fire protection properties. Resistant to solvents, acids and alkalis. Packed in sturdy display boxes, TREDUX enables individual combination of the desired hose sizes. Barcode marking per hose for quick and error-free billing. TREDUX is a thin-walled, flexible shrink tubing with a shrink rate of 2:1 and 3:1. All TREDUX shrink tubing is offered in 1 m lengths in practical boxes for the TREDUX display. TREDUX is available in 9 sizes from 1.5 mm to 101.6 mm in the colors black and green-yellow in a display box. Even components with large diameter differences can be shrunk with TREDUX thanks to the advantageous 3:1 shrink rate.
Lieske Part No.: 328321

Thin-walled: flexible, light, space-saving. 3:1 covers a larger application area, increased contact pressure. Very good fire protection properties. Resistant to solvents, acids and alkalis. Packed in sturdy display boxes, TREDUX enables individual combination of the desired hose sizes. Barcode marking per hose for quick and error-free billing. TREDUX is a thin-walled, flexible shrink tubing with a shrink rate of 2:1 and 3:1. All TREDUX shrink tubing is offered in 1 m lengths in practical boxes for the TREDUX display. TREDUX is available in 9 sizes from 1.5 mm to 101.6 mm in the colors black and green-yellow in a display box. Even components with large diameter differences can be shrunk with TREDUX thanks to the advantageous 3:1 shrink rate.
Lieske Part No.: 241966

Thin-walled: flexible, light, space-saving. 3:1 covers a larger application area, increased contact pressure. Very good fire protection properties. Resistant to solvents, acids and alkalis. Packed in sturdy display boxes, TREDUX enables individual combination of the desired hose sizes. Barcode marking per hose for quick and error-free billing. TREDUX is a thin-walled, flexible shrink tubing with a shrink rate of 2:1 and 3:1. All TREDUX shrink tubing is offered in 1 m lengths in practical boxes for the TREDUX display. TREDUX is available in 9 sizes from 1.5 mm to 101.6 mm in the colors black and green-yellow in a display box. Even components with large diameter differences can be shrunk with TREDUX thanks to the advantageous 3:1 shrink rate.
Lieske Part No.: 531373

Heat shrinkable tubing m lengths TREDUX The shrinkage rate up to 3:
allows different applications with less tubes. The thin and flexible tubes shrink in quickly and provide good insulation properties and mechanical protection. The favorable length of
m allows individual configuration of the required hose sizes. Material: Polyolefin, cross-linked (POX) Black / green-yellow Operating temperature: -55 ° C to +
25 ° C Flammability: 6 sec. Max, according to ASTM D 267
Min Supplied inside: 38,
max. Degree of shrinkage:
9,
Wall thickness nom.:
, 2 Type: TREDUX 38,
/
9,

ST.
Lieske Part No.: 910296

Thin-walled: flexible, light, space-saving. 3:1 covers a larger application area, increased contact pressure. Very good fire protection properties. Resistant to solvents, acids and alkalis. Packed in sturdy display boxes, TREDUX enables individual combination of the desired hose sizes. Barcode marking per hose for quick and error-free billing. TREDUX is a thin-walled, flexible shrink tubing with a shrink rate of 2:1 and 3:1. All TREDUX shrink tubing is offered in 1 m lengths in practical boxes for the TREDUX display. TREDUX is available in 9 sizes from 1.5 mm to 101.6 mm in the colors black and green-yellow in a display box. Even components with large diameter differences can be shrunk with TREDUX thanks to the advantageous 3:1 shrink rate.
Sales unit: 6 pieces
Lieske Part No.: 567345

Thin-walled: flexible, light, space-saving. 3:1 covers a larger application area, increased contact pressure. Very good fire protection properties. Resistant to solvents, acids and alkalis. Packed in sturdy display boxes, TREDUX enables individual combination of the desired hose sizes. Barcode marking per hose for quick and error-free billing. TREDUX is a thin-walled, flexible shrink tubing with a shrink rate of 2:1 and 3:1. All TREDUX shrink tubing is offered in 1 m lengths in practical boxes for the TREDUX display. TREDUX is available in 9 sizes from 1.5 mm to 101.6 mm in the colors black and green-yellow in a display box. Even components with large diameter differences can be shrunk with TREDUX thanks to the advantageous 3:1 shrink rate.
Sales unit: 6 pieces
Lieske Part No.: 633272

Thin-walled: flexible, light, space-saving. 3:1 covers a larger application area, increased contact pressure. Very good fire protection properties. Resistant to solvents, acids and alkalis. Packed in sturdy display boxes, TREDUX enables individual combination of the desired hose sizes. Barcode marking per hose for quick and error-free billing. TREDUX is a thin-walled, flexible shrink tubing with a shrink rate of 2:1 and 3:1. All TREDUX shrink tubing is offered in 1 m lengths in practical boxes for the TREDUX display. TREDUX is available in 9 sizes from 1.5 mm to 101.6 mm in the colors black and green-yellow in a display box. Even components with large diameter differences can be shrunk with TREDUX thanks to the advantageous 3:1 shrink rate.
Sales unit: 3 pieces
Lieske Part No.: 557133