UBIQUITI NETWORKS U6-Mesh Ubiquiti Unifi Access Point Mesh / Indoor-Outdoor / WiFi 6 Mesh 4x4 Access Point /
|
189,96 EUR |
|
|
( 226,05 EUR incl. VAT ) ≈ £158.81 | ≈ $209.91 plus delivery charges: 55,00 € |
|
| Made to order · Delivery time approx. 20 workdaysinfo_outline | |
| Lieske Part No.: | 1970233 |
|---|---|
| Mfg Part No: | U6-Mesh |
| UPC/EAN: | 8100100782782 |
| Weight: | 0.85 kg |
Further Access Points from UBIQUITI NETWORKSFurther products in category Access Points
All products of UBIQUITI NETWORKS
Product information for UBIQUITI NETWORKS U6-Mesh:
The Ubiquiti U6-Mesh is an Access Point for WiFi 6 (802.11ax) networks, suitable for both indoor and outdoor use. It serves as a Mesh-Access Point to extend and optimise wireless network coverage in home and business environments. The device features high performance and supports modern wireless technologies such as MU-MIMO and OFDMA, ensuring efficient data transmission and even distribution of network resources.
Applications
The U6-Mesh is designed for indoor and outdoor use, with its waterproof housing rated to protection class IPX5 ensuring reliable operation in rain and humidity. It is suitable for residential and office applications where seamless WLAN coverage across multiple rooms or building areas is required. The Plug-and-Play functionality allows for quick setup without extensive configuration, making it suitable even for users without advanced network knowledge.
Features and Specifications in Detail
The Access Point supports two radio bands: the 2.4-GHz band with 2x2 MIMO and the 5-GHz band with 4x4 MIMO. The total throughput rate reaches up to 5.3 Gbit/s, with the 5-GHz band achieving a maximum rate of 4.8 Gbit/s and the 2.4-GHz band reaching 573.5 Mbit/s. Support for 160 MHz channel width in the 5-GHz band enables higher bandwidth and improved uplink capacity, especially in mesh topologies. The maximum transmit power is 22 dBm in the 2.4-GHz band and 26 dBm in the 5-GHz band, ensuring sufficient range for typical use cases.
Technology Explained Simply
The MU-MIMO (Multi-User Multiple Input Multiple Output) technology allows simultaneous data transmission to multiple clients, increasing network efficiency. OFDMA (Orthogonal Frequency Division Multiple Access) divides the frequency band into smaller channels to optimise data transmission for multiple devices simultaneously. The 4x4 MIMO configuration in the 5-GHz band provides four data streams, increasing overall throughput. Antenna gains are 3 dBi in the 2.4-GHz band and 5 dBi in the 5-GHz band, supporting targeted signal radiation.
Compatibility and Accessories
The U6-Mesh is compatible with the UniFi Network Software, supporting versions from 6.2.51 onwards. Management is performed via the web application or mobile app. The device can be combined with other Ubiquiti products such as the UniFi High Efficiency Dual-Band Directional Mesh Antenna (UMA-D) or the FiberPoE (F-POE-G2) to extend network performance. A PoE adapter is included in the delivery scope, enabling power supply over the network cable according to 802.3af. Alternatively, the device can be connected to a PoE switch with 48 V.
Mounting and Installation
Mounting is possible via wall, table, or mast mounting, with the required mounting materials included in the delivery scope. Ceiling mounting is optional, requiring a separate holder (e.g. FlexHD-CM-3). Installation is simple and performed via the UniFi software, with setup completed in minutes.
Operational Advantages
The U6-Mesh supports a high number of simultaneous clients (300+), making it suitable for larger networks. Support for VLAN (802.1Q), QoS, and guest traffic isolation enables structured network management. The operating temperature range is from -30 °C to 60 °C, ensuring usability in various environments. The maximum power consumption is 11.4 W, enabling energy-efficient operation. Certifications CE, FCC, and IC confirm compliance with applicable standards.
Applications
The U6-Mesh is designed for indoor and outdoor use, with its waterproof housing rated to protection class IPX5 ensuring reliable operation in rain and humidity. It is suitable for residential and office applications where seamless WLAN coverage across multiple rooms or building areas is required. The Plug-and-Play functionality allows for quick setup without extensive configuration, making it suitable even for users without advanced network knowledge.
Features and Specifications in Detail
The Access Point supports two radio bands: the 2.4-GHz band with 2x2 MIMO and the 5-GHz band with 4x4 MIMO. The total throughput rate reaches up to 5.3 Gbit/s, with the 5-GHz band achieving a maximum rate of 4.8 Gbit/s and the 2.4-GHz band reaching 573.5 Mbit/s. Support for 160 MHz channel width in the 5-GHz band enables higher bandwidth and improved uplink capacity, especially in mesh topologies. The maximum transmit power is 22 dBm in the 2.4-GHz band and 26 dBm in the 5-GHz band, ensuring sufficient range for typical use cases.
Technology Explained Simply
The MU-MIMO (Multi-User Multiple Input Multiple Output) technology allows simultaneous data transmission to multiple clients, increasing network efficiency. OFDMA (Orthogonal Frequency Division Multiple Access) divides the frequency band into smaller channels to optimise data transmission for multiple devices simultaneously. The 4x4 MIMO configuration in the 5-GHz band provides four data streams, increasing overall throughput. Antenna gains are 3 dBi in the 2.4-GHz band and 5 dBi in the 5-GHz band, supporting targeted signal radiation.
Compatibility and Accessories
The U6-Mesh is compatible with the UniFi Network Software, supporting versions from 6.2.51 onwards. Management is performed via the web application or mobile app. The device can be combined with other Ubiquiti products such as the UniFi High Efficiency Dual-Band Directional Mesh Antenna (UMA-D) or the FiberPoE (F-POE-G2) to extend network performance. A PoE adapter is included in the delivery scope, enabling power supply over the network cable according to 802.3af. Alternatively, the device can be connected to a PoE switch with 48 V.
Mounting and Installation
Mounting is possible via wall, table, or mast mounting, with the required mounting materials included in the delivery scope. Ceiling mounting is optional, requiring a separate holder (e.g. FlexHD-CM-3). Installation is simple and performed via the UniFi software, with setup completed in minutes.
Operational Advantages
The U6-Mesh supports a high number of simultaneous clients (300+), making it suitable for larger networks. Support for VLAN (802.1Q), QoS, and guest traffic isolation enables structured network management. The operating temperature range is from -30 °C to 60 °C, ensuring usability in various environments. The maximum power consumption is 11.4 W, enabling energy-efficient operation. Certifications CE, FCC, and IC confirm compliance with applicable standards.
| General | |
| WLAN standard | 802.11ax |
| Radio bands | 2.4 GHz and 5 GHz |
| MIMO configuration 2.4 GHz | 2x2 |
| MIMO configuration 5 GHz | 4x4 |
| Throughput rate 2.4 GHz | 573,5 Mbit/s |
| Throughput rate 5 GHz | 4,8 Gbit/s |
| Total throughput rate | 5,3 Gbit/s |
| Transmit power 2.4 GHz | 22 dBm |
| Transmit power 5 GHz | 26 dBm |
| Antenna gain 2.4 GHz | 3 dBi |
| Antenna gain 5 GHz | 5 dBi |
| Current supply | PoE (802.3af) |
| Supported voltage range | 44–57 V DC |
| Maximum power consumption | 11,4 W |
| Network interface | 1x GbE RJ45 port |
| Management interfaces | Ethernet, Bluetooth |
| Degree of protection | IPX5 |
| Operation temperature | -30 to 60 °C |
| Operating humidity | 5 to 95 % non-condensing |
| Certifications | CE, FCC, IC |
| Simultaneous clients | 300+ |
| BSSID per radio | 8 |
| VLAN | 802.1Q |
| QoS | Rate limiting per user, guest traffic isolation |
| Software support | UniFi Network Version 6.2.51 and higher |
| Mounting types | Wall, table, pole mounting (included in delivery), ceiling mounting (optional) |
| Housing material | plastic, aluminium |
| Materials mounting | Plastic |
| LEDs | White, Blue |
| Button | reset to factory settings |
| DFS | |
Questions & answers
What is the delivery time of UBIQUITI NETWORKS U6-Mesh Ubiquiti Unifi Access Point Mesh / Indoor-Outdoor / WiFi 6 Mesh 4x4 Access Point / ?
The article UBIQUITI NETWORKS U6-Mesh Ubiquiti Unifi Access Point Mesh / Indoor-Outdoor / WiFi 6 Mesh 4x4 Access Point / is currently not in stock and must be ordered on a per-order basis.
According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of UBIQUITI NETWORKS U6-Mesh to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you UBIQUITI NETWORKS U6-Mesh Ubiquiti Unifi Access Point Mesh / Indoor-Outdoor / WiFi 6 Mesh 4x4 Access Point / always at the best possible price. We can give you a discount of 2% on UBIQUITI NETWORKS U6-Mesh Ubiquiti Unifi Access Point Mesh / Indoor-Outdoor / WiFi 6 Mesh 4x4 Access Point / if you choose payment in advance on ordering.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.
Fitting accessory for UBIQUITI NETWORKS U6-Mesh Ubiquiti Unifi Access Point Mesh / Indoor-Outdoor / WiFi 6 Mesh 4x4 Access Point /
 |
 Allnet ALL95100 TP Cat 6 surge and lightning protection surge protector
The Allnet ALL95100 is a surge protector for network cables, housed in a compact metal housing, and inserted between the network cable and the device to be protected. It protects sensitive devices ...Lieske Part No.: 232880 Mfg Part No: ALL95100 |
18,90 EUR
 ≈ £15.80 | ≈ $20.88
Delivery time from supplier's stock (ca.) 4 workdaysinfo_outline
|
 |
Allnet ALL0488v6 PoE injector Gigabit PoE & PoE+ (15.4W/30W) / plastic housing /
ALLNET PoE injector Gigabit PoE IEEE802.3af Intelligent power supply via network without switch With the ALLNET ALL0488V6 Power over Ethernet injector you can install your PoE-capable IP devices such ... Lieske Part No.: 533144 Mfg Part No: ALL0488v6 |
-7% 19,72 EUR 21,25 EUR
≈ £16.49 | ≈ $21.79
Delivery time from supplier's stock (ca.) 4 workdaysinfo_outline
|
 |
UBIQUITI NETWORKS ETH-SP-G2 Ubiquiti Ethernet Surge Protector, Gen 2
The ETH-SP-G2 from Ubiquiti Networks is an ESD protection device for high-speed networks in outdoor environments. It protects outdoor Ethernet devices from transient voltage surges caused by ... Lieske Part No.: 1119027 Mfg Part No: ETH-SP-G2 |
11,95 EUR
≈ £9.99 | ≈ $13.20
Made to order · Delivery date not yet confirmedinfo_outline
|
 |
UBIQUITI NETWORKS UMA-D Ubiquiti UniFi High Efficiency Dual-Band Directional Mesh Antenna,
Ubiquiti Unifi Antenna Directional Dual-Band Antenna for UAP-AC-M The UMA-D is a dual-band, dual-polarity antenna optimized for 802.11ac. It offers a directional beam pattern and a three-axis ball ... Lieske Part No.: 1138309 Mfg Part No: UMA-D |
82,12 EUR
≈ £68.65 | ≈ $90.74
On order · Expected to be available from 01.01.2199info_outline
|
 |
Allnet ALL-SG8610PMJ Switch full managed Layer2+ 10 Port • 8x GbE • PoE Budget 130W • 8x PoE at • 2x SFP • 48,3 cm ( 19 inch ) • fanless • JSON API •
Industry-Electronics Switch full managed Layer2+ 10 Port • 8x GbE • PoE Budget 130W • 8x PoE at • 2x SFP • 48,3 cm ( 19 inch ) • Lüfterlos • JSON API • ALL-SG8610PMJJ Highlights: ... Lieske Part No.: 1160285 Mfg Part No: ALL-SG8610PMJ |
-12% 190,80 EUR 217,55 EUR
≈ £159.51 | ≈ $210.83
Delivery time from supplier's stock (ca.) 4 workdaysinfo_outline
|
 |
UBIQUITI NETWORKS F-POE-G2 Ubiquiti FiberPoE,
Connects remote PoE devices and provides data and power over fiber optic and DC cables. Reliable Gigabit PoE runs over long distances Reliable 24V/50V PoE passive transport Enhanced ESD protection and ... Lieske Part No.: 1467804 Mfg Part No: F-POE-G2 |
29,49 EUR
≈ £24.65 | ≈ $32.59
Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline
|
 |
UBIQUITI NETWORKS FlexHD-CM-3 Ubiquiti Ceiling Mount for UniFi FlexHD
Ceiling mount for FlexHD and U6 Mesh access points. Compatible with the U6 Mesh, FlexHD Mounts to a suspended ceiling panel, a drywall ceiling* or a solid ceiling Sliding bracket with locking thread ... Lieske Part No.: 1782192 Mfg Part No: FlexHD-CM-3 |
44,26 EUR 45,24 EUR
≈ £37.00 | ≈ $48.91
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
UBIQUITI NETWORKS UACC-LRE Ubiquiti Long-Range In-/Outdoor Ethernet Repeater PoE in/out
Long range Gigabit Ethernet adapter that receives PoE/PoE+ and provides passthrough PoE output. Extend PoE connections up to 1 km* (1) GbE RJ45 port for PoE/PoE+ input (1) GbE RJ45 port for ... Lieske Part No.: 2125426 Mfg Part No: UACC-LRE |
30,44 EUR
≈ £25.45 | ≈ $33.64
Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline
|
 |
UBIQUITI NETWORKS U-PoE Ubiquiti PoE Injector • PoE • 15 W • GbE •
Ein Adapter, der UniFi-PoE-Geräte mit Strom versorgen, die Abhängigkeit von der PoE-Switch-Stromversorgung reduzieren und eine Gigabit-LAN-Verbindung bereitstellen kann. Highlights: Liefert bis zu ... Lieske Part No.: 2178143 Mfg Part No: U-PoE |
8,41 EUR
≈ £7.03 | ≈ $9.29
Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline
|