General
WLAN standard	802.11ax
Radio bands	2.4 GHz and 5 GHz
MIMO configuration 2.4 GHz	2x2
MIMO configuration 5 GHz	4x4
Throughput rate 2.4 GHz	573,5 Mbit/s
Throughput rate 5 GHz	4,8 Gbit/s
Total throughput rate	5,3 Gbit/s
Transmit power 2.4 GHz	22 dBm
Transmit power 5 GHz	26 dBm
Antenna gain 2.4 GHz	3 dBi
Antenna gain 5 GHz	5 dBi
Current supply	PoE (802.3af)
Supported voltage range	44–57 V DC
Maximum power consumption	11,4 W
Network interface	1x GbE RJ45 port
Management interfaces	Ethernet, Bluetooth
Degree of protection	IPX5
Operation temperature	-30 to 60 °C
Operating humidity	5 to 95 % non-condensing
Certifications	CE, FCC, IC
Simultaneous clients	300+
BSSID per radio	8
VLAN	802.1Q
QoS	Rate limiting per user, guest traffic isolation
Software support	UniFi Network Version 6.2.51 and higher
Mounting types	Wall, table, pole mounting (included in delivery), ceiling mounting (optional)
Housing material	plastic, aluminium
Materials mounting	Plastic
LEDs	White, Blue
Button	reset to factory settings
DFS

The Ubiquiti U6-Mesh is an Access Point for WiFi 6 (802.11ax) networks, suitable for both indoor and outdoor use. It serves as a Mesh-Access Point to extend and optimise wireless network coverage in home and business environments. The device features high performance and supports modern wireless technologies such as MU-MIMO and OFDMA, ensuring efficient data transmission and even distribution of network resources.

Applications

The U6-Mesh is designed for indoor and outdoor use, with its waterproof housing rated to protection class IPX5 ensuring reliable operation in rain and humidity. It is suitable for residential and office applications where seamless WLAN coverage across multiple rooms or building areas is required. The Plug-and-Play functionality allows for quick setup without extensive configuration, making it suitable even for users without advanced network knowledge.

Features and Specifications in Detail

The Access Point supports two radio bands: the 2.4-GHz band with 2x2 MIMO and the 5-GHz band with 4x4 MIMO. The total throughput rate reaches up to 5.3 Gbit/s, with the 5-GHz band achieving a maximum rate of 4.8 Gbit/s and the 2.4-GHz band reaching 573.5 Mbit/s. Support for 160 MHz channel width in the 5-GHz band enables higher bandwidth and improved uplink capacity, especially in mesh topologies. The maximum transmit power is 22 dBm in the 2.4-GHz band and 26 dBm in the 5-GHz band, ensuring sufficient range for typical use cases.

Technology Explained Simply

The MU-MIMO (Multi-User Multiple Input Multiple Output) technology allows simultaneous data transmission to multiple clients, increasing network efficiency. OFDMA (Orthogonal Frequency Division Multiple Access) divides the frequency band into smaller channels to optimise data transmission for multiple devices simultaneously. The 4x4 MIMO configuration in the 5-GHz band provides four data streams, increasing overall throughput. Antenna gains are 3 dBi in the 2.4-GHz band and 5 dBi in the 5-GHz band, supporting targeted signal radiation.

Compatibility and Accessories

The U6-Mesh is compatible with the UniFi Network Software, supporting versions from 6.2.51 onwards. Management is performed via the web application or mobile app. The device can be combined with other Ubiquiti products such as the UniFi High Efficiency Dual-Band Directional Mesh Antenna (UMA-D) or the FiberPoE (F-POE-G2) to extend network performance. A PoE adapter is included in the delivery scope, enabling power supply over the network cable according to 802.3af. Alternatively, the device can be connected to a PoE switch with 48 V.

Mounting and Installation

Mounting is possible via wall, table, or mast mounting, with the required mounting materials included in the delivery scope. Ceiling mounting is optional, requiring a separate holder (e.g. FlexHD-CM-3). Installation is simple and performed via the UniFi software, with setup completed in minutes.

Operational Advantages

The U6-Mesh supports a high number of simultaneous clients (300+), making it suitable for larger networks. Support for VLAN (802.1Q), QoS, and guest traffic isolation enables structured network management. The operating temperature range is from -30 °C to 60 °C, ensuring usability in various environments. The maximum power consumption is 11.4 W, enabling energy-efficient operation. Certifications CE, FCC, and IC confirm compliance with applicable standards.