Tool for quickly and safely dismantling the recessed downlight and separating the reflector from the rest of the luminaire body. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 1868622

Installation frame for installing M73 recessed lights in M84 ceilings with concealed support rails. Also suitable in combination with M73 recessed lights for installation in sawn ceilings. Required ceiling thickness 15 - 60 mm. Surface coated in white (RAL 9016). Please note installation instructions. Accessories available for 10 years after the invoice date subject to reasonable changes in the interests of progress.
Lieske Part No.: 1868617

Truss attachment for Jovie 50/70 top-mounted light with mast attachment MB D60.... Spigot size Ø 60 mm. Version with 15° tilt angle. Made of hot-dip galvanized steel. With stainless steel fastening material (M12 x 40). The truss attachment is used to accommodate a mast attachment Z MB and can be mounted on suitable objects in a variety of ways. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 2131521

Suspension accessories for luminaires of the series: 2330 M73/M84... G3 .
Lieske Part No.: 2039297

Through-wiring made of heat-resistant individual cables. For use in combination with lamp D1/H1 and lamp D1/H1 with coupling (ZLK SAN) D/H1 or D/H2 and lamp D1/H1 with dummy module D/H (BL) L60 or L75. 3-core version, Ø 1.5 mm2. Packaging unit 1 set. Accessories available for 10 years after the invoice date subject to reasonable changes in the interest of progress.
Lieske Part No.: 1053491

Through-wiring made of heat-resistant individual cables. For use in combination with lamp D2/H2 and lamp D2/H2 as well as lamp D2/H2 with coupling (ZLK SAN) D/H1 or D/H2 and lamp D2/H2 with dummy module D/H (BL) L60 or L75 or L150 as well as in combination with lamp D1/H1 with dummy module D/H (BL) L150. For use in combination with lamp D1/H1 and lamp D2/H2. With this combination, the through-wiring must be cut to length. 3-core version, Ø 1.5 mm2. Packaging unit 1 set. Accessories available for 10 years after the invoice date subject to reasonable changes in the interest of progress.
Lieske Part No.: 1053492

Transparent power cable with integrated snap-in strain relief. 3-core version, Ø 1.5 mm2. Cable length 1000 mm. Packaging unit consisting of 1 piece. Width 130 mm, height 150 mm. Accessories available for 10 years after the invoice date subject to reasonable changes in the interest of progress.
Lieske Part No.: 1053494

Transparent power cable with integrated snap-in strain relief. 3-core version, Ø 1.5 mm2. Cable length 2000 mm. Packaging unit consisting of 1 piece. Width 130 mm, height 150 mm. Accessories available for 10 years after the invoice date subject to reasonable changes in the interest of progress.
Lieske Part No.: 1053495

Transparent power cable with integrated snap-in strain relief. 5-core version, Ø 1.5 mm2. Cable length 1000 mm. Packaging unit consisting of 1 piece. Width 130 mm, height 150 mm. Accessories available for 10 years after the invoice date subject to reasonable changes in the interests of progress.
Lieske Part No.: 1053496

Transparent power cable with integrated snap-in strain relief. 7-core version, Ø 1.5 mm2. Cable length 2000 mm. Packaging unit consisting of 1 piece. Width 130 mm, height 150 mm. Accessories available for 10 years after the invoice date subject to reasonable changes in the interest of progress.
Lieske Part No.: 2092885

Y-cable suspension for suspension lengths up to: 2000 mm. Packaging unit consisting of 1 piece. Accessories available for 10 years after the invoice date subject to reasonable changes in the interest of progress.
Lieske Part No.: 1053499

Mounting frame for ceiling mounting. For use in combination with a luminaire from the series: ArimoFit G2 M84... . Made of sheet steel, white powder-coated (RAL 9016). Dimensions (L x W): 622 mm x 622 mm, H = 57 mm. For flush mounting in the ceiling. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 2051735

Mounting frame for ceiling mounting. For use in combination with a luminaire from the series: ArimoFit G2 M59... . Made of sheet steel, white powder-coated (RAL 9016). Dimensions (L x W): 1547 mm x 310 mm, H = 57 mm. For flush mounting in the ceiling. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 2062580

Mounting accessories for installation in sawn ceiling openings. For luminaires from the Arimo Fit M84 G2 / M57 G2 series.
Lieske Part No.: 2051738

Mounting accessories for installation in sawn ceiling openings. For luminaires from the Arimo Fit M59 G2 series.
Lieske Part No.: 2062581

End cap made of thermoplastically fused ASA / TPE with a high-quality, matt surface structure and surface quality in accordance with VDI30. For protection class-compliant power supply (IP66), the end cap is equipped with 3 self-sealing membranes for cable cross-sections 7 mm - 13 mm and 3 pre-stamped power supply points for PG screw connections (M20 / M25). For replacement or exchange. Packaging unit 2 pieces. Color light gray. Module length 75 mm. Accessories available 10 years after the invoice date subject to reasonable changes in the interest of progress.
Lieske Part No.: 2037159

Renovation plate for covering existing ceiling cutouts in renovation applications. For round downlights of the 2325 G3 C07 series... . For ceiling cutouts Ø 220 -250 mm.
Lieske Part No.: 2069758

Renovation plate for covering existing ceiling cutouts in renovation applications. For round downlights of the 2325 G3 C05... series. For ceiling cutouts Ø 160 -200 mm.
Lieske Part No.: 2069757

Mounting frame for ceiling mounting of recessed luminaires Siella G8... M84 / Valineo G4... M84.
Lieske Part No.: 2128707

Accessories, mounting bracket, mounting accessories for WLS27 line lights, snap bracket for WLS27 line light, material: polycarbonate, 5.3 mm hole for fastening, contains: 2x snap clips
Lieske Part No.: 1920125

E14 sockets, three-part smooth jacket, jacket lock, black material: PET GF, T190, nominal value: 2/250 socket terminals: 0.5-2.5qmm molded thread: M10x1 weight: 23g type: 54000, design: Edison socket, nipple thread: M10x1, fastening type: screw fastening, socket: E14, material: plastic, color: white, with starter holder: no
Lieske Part No.: 461467

E14 sockets, three-part external thread jacket 28x2 IEC 399mAntel lock, whiteMaterial: PET GF, T190, Nominal value: 2/250 Socket terminals: 0.5-2.5qmm Molded thread: M10x1 Weight: 23g Type: 54100, Design: Edison socket Nipple thread: M10x1 Fastening type: Screw fastening Color: black, Socket: E14 Material: Plastic With starter holder: No
Lieske Part No.: 211898

E27 sockets, three-part smooth jacket, jacket lock Material: PET GF, T190, Nominal value: 4/250 Socket terminals: 0.5-2.5qmm Molded thread: M10x1 Weight: 34g Type: 52800 black Color: black Socket: E27 Material: plastic Nipple thread: M10x1 Design: Edison socket Mounting type: screw fastening, With starter holder: No
Lieske Part No.: 450644

E27 sockets, three-part smooth jacket, jacket lock material: PET GF, T190, nominal value: 4/250 socket terminals: 0.5-2.5qmm nipple thread: M10x1 weight: 34g type: 52800 brass-colored, design: Edison socket, nipple thread: M10x1, fastening type: screw fastening, socket: E27, color: brass, material: plastic, with starter holder: no
Lieske Part No.: 1324204

E27 sockets, three-part external thread jacket 40x2.5 IEC 399mAntel lock, whiteMaterial: PET GF, T190, Nominal value: 4/250 Socket terminals: 0.5-2.5qmm Molded thread: M10x1 Weight: 34g Type: 52900, Design: Edison socket Nipple thread: M10x1 Fastening type: Screw fastening Socket: E27, Material: Plastic Color: white With starter holder: No
Lieske Part No.: 1324203

Fc2 socket Housing: Ceramic, T250 Nominal value: 10/250/5kV, Contacts: Ni Cable: Cu tinned, fine-stranded 1qmm, Si insulation max. D3.6mm, length: 300mm Fastening screws M4, captive Weight: 102g rigid fastening Type: 02574 When using sockets for lamps with ignition pulses max. 20kV, the lamp manufacturer is responsible for compliance with creepage distances and clearances. Material: Ceramic, Design: Screw socket Fastening type: Screw fastening Socket: Fc2 With starter holder: No Color: white
Lieske Part No.: 286007

Fc2 socket Housing: Ceramic, T250 Nominal value: 10/250/5kV, Contacts: Ni Cable: Cu tinned, fine-stranded 1qmm, Si insulation max. D3.6mm, length: 300mm Fastening screws M4, captive Weight: 102g Movable fastening type 02575 When using sockets for lamps with ignition pulses max. 20kV, the lamp manufacturer is responsible for compliance with creepage distances and clearances. Material: Ceramic, Socket: Fc2, Fastening type: Screw fastening, Design: Screw socket, Color: white, With starter holder: No
Lieske Part No.: 356327

E 27 Thermoplasfassungen
Nominal value 4/250, socket terminals
Screw rings Thermoplastic
E 14 Ø 43.0 mm height 15 mm
Color: white

Type: 100125
Quantity: 1 unit.
Lieske Part No.: 412217

Candle sleeves for E14 candle sockets Material: plastic, white Height: 65mm Weight: 6.5g Type: 05310 with drop, Design: Edison socket, Material: plastic, Socket: E14, Color: white, With starter holder: No
Lieske Part No.: 533192

Candle sleeves for E14 candle sockets Material: Plastic, white Height: 85mm Weight: 7.5g Type: 05311 with drop Design: Edison socket Material: Plastic Socket: E14 With starter holder: No Color: white
Lieske Part No.: 129894

Candle sleeves for E14 candle sockets Material: plastic, white Height: 100mm Weight: 8g Type: 05312 with drop, Design: Edison socket, Material: plastic, Socket: E14, With starter holder: No, Color: white
Lieske Part No.: 644663

Candle sleeves for E14 candle holders Material: Plastic, white Height: 85mm Weight: 7.5g Type: 05314 without drops Material: Plastic Socket: E14 Version: Edison socket With starter holder: No Color: white
Lieske Part No.: 797552

Candle sleeves for E14 candle sockets Material: plastic, white Height: 100mm Weight: 8g Type: 05315 without drop Design: Edison socket Socket: E14 Material: plastic Color: white With starter holder: No
Lieske Part No.: 864379

Metal screw rings
Ø 14 E, 40.0 mm, height 12.5 mm
Color: chrome Type: 100194


Quantity: 1 unit.
Lieske Part No.: 119834

Metal screw rings e
4 Ø, 4 mm, height
2.5 mm Color: brass color type:

96 Quantity:
ST.
Lieske Part No.: 975126

Metal screw rings
E 27 Ø 54.0 mm, height 14.0 mm
Color: chrome

Type: 100217
Quantity: 1 unit.
Lieske Part No.: 290418

E metal screw rings Ø 27, 54, mm, height
4 mm Color: brass color type:
2
9 item:
ST.
Lieske Part No.: 104996

E 27 Thermoplasfassungen rating 4/25, socket screw ring terminals Thermoplastic E 27 Ø, 55 mm height
5 mm Colour: white Type:
27 Quantity:
ST.
Sales unit: 50 pieces
Lieske Part No.: 907832

G 5 through-hole and surface mount
lateral. Locking lugs, screw terminals, with slot for screw fastening
Color: white

Type: 100305
Quantity: 1 unit.
Lieske Part No.: 623707

G5 built-in socket Housing: PC, white, T110 Nominal value: 2/500 Single plug-in terminals: 0.5-1qmm Rear split pins for wall thickness up to 1.2mm Weight: 2.6g Type: 09205 With starter holder: No Material: Plastic, Design: Built-in socket Mounting type: Plug-in mounting Socket: G5 Color: white
Lieske Part No.: 804320

Starterholders
For starters, DIN, screw terminals, Durchgengslöcher for screws M3 & M4 Type: 100315


Quantity: 1 unit.
Lieske Part No.: 607685

G
3 sockets, IP67 / IP54 dust and water proof, for luminaires of protection class I or II plug-in terminals, white, springy length adjustment, silicone gasket with Anschraubfuß execution: T
2 (38 mm) Type:
384 sales unit:
ST.
Lieske Part No.: 913313

G
3 sockets, IP67 / IP54 dust and water proof, for luminaires of protection class I or II plug-in terminals, white, springy length adjustment, silicone gasket with Anschraubfuß Type: T 8 (26 mm) Type:
387 Quantity:
ST.
Lieske Part No.: 796801

Lampholders for compact fluorescent lamps
Lamp holder for T Lamps
Steel zinc plated through hole M4 / M3, 5
Type: T 8 (26 mm)

Type: 100442
Quantity: 1 unit.
Lieske Part No.: 498774

Lampholders for compact fluorescent lamp holder for T-light steel zinc plated through hole M4 / M3, 5 Execution: T
2 (38 mm) Type:
444 sales unit:
ST.
Lieske Part No.: 904352

Material: plastic, type of accessories: other
Lieske Part No.: 980187

G13 double sockets for lamps T8 and T12, light point height: 25mm, light point spacing: 76mm housing: PC, white, rotor: PBT GF, white, T130, nominal value: 2/500, double plug-in terminals on the underside: 0.5-1qmm (lamp circuit) single plug-in terminals on the underside: 0.5-1qmm (starter circuit) plug-in foot for wall thickness 0.6-1mm weight: 21g with starter holder. without cam, design: double socket, color: white, with starter holder: no, socket: G13, fastening type: plug-in fastening, material: plastic, nipple thread: without
Lieske Part No.: 133661

G13 double sockets for lamps T8 and T12, light point height: 25mm, light point spacing: 76mm Housing: PC, white, rotor: PBT GF, white, T130, nominal value: 2/500, double plug-in terminals on the underside: 0.5-1qmm (lamp circuit) single plug-in terminals on the underside: 0.5-1qmm (starter circuit) plug-in foot for wall thickness 0.6-1mm Weight: 21g without starter holder. without cams, material: plastic, fastening type: plug-in fastening, socket: G13, design: double socket, colour: white, with starter holder: no
Lieske Part No.: 195892

Lampholders for compact fluorescent lamps

G 13 double version

Einsteckfuß, double-clamp terminals, with starter intake

Features: without cams

Model: 100548 Package: 1 PC.
Lieske Part No.: 392769

Ballasts

super flat design: 18 x 41 mm

with socket for TC, TC-D, 230V / 50Hz



Lamp power (Watts): 2 x 5-9 W

Model: 100552 Package: 1 PC.
Lieske Part No.: 149793