BEGA installation housing 13522 for installing lights in insulated facades. Suitable for insulation thicknesses of 120 to 200 mm. Installation housing made of polystyrene. Dimensions: 327 x 123 x 200 mm.
Lieske Part No.: 1587455

BEGA plaster frame 13529. Suitable for installation housing 10490. Plaster frame made of stainless steel. Dimensions: 255 x 255 x 35 mm.
Lieske Part No.: 1342347

BEGA Smart Tower 13567 for the LED lighting system BEGA Plug & Play. Housing made of plastic (polyamide), glass fiber reinforced, color graphite. With 5 m connection cable H05RN-F 3 G 1 qmm with free cable end. Secondary: 48 V = DC · 0 - 50 W. 4 outputs, individually switchable and dimmable, for connecting lights and distributors. Connected load max. 50 W. Protection class IP 65. Dimensions: Ø 130 x 75 mm.
Lieske Part No.: 1596211

BEGA installation housing 13599 for flush installation in concrete ceilings. Suitable for installation in both precast and in-situ concrete ceilings. Installation housing made of aluminum. 2 opposing cable entries for installation pipes max. ø 30 mm. Dimensions: Ø 245 x 195 mm. Installation opening Ø 135 mm.
Lieske Part No.: 1867279

BEGA installation housing 13602 for flush installation in concrete ceilings. Suitable for installation in both precast and in-situ concrete ceilings. Installation housing made of aluminum. 2 opposing cable entries for installation pipes max. ø 30 mm. Dimensions: Ø 265 x 230 mm. Installation opening Ø 155 mm.
Lieske Part No.: 1780660

BEGA installation housing 13603 for installation in concrete ceilings that are to be plastered. Suitable for installation in both precast and in-situ concrete ceilings. Installation housing made of aluminum. 2 opposing cable entries for installation pipes max. ø 30 mm. Dimensions: Ø 265 x 205 mm. Installation opening Ø 155 mm.
Lieske Part No.: 1780616

BEGA 70027 Zigbee button module IP 20 with integrated 2.4 GHz antenna for use indoors and anywhere where a higher protection class is not required. 4 inputs for potential-free buttons. Can be used as a router or coordinator in Zigbee networks. Voltage 100 - 240 V, 50 / 60 Hz.
Lieske Part No.: 1333141

BEGA installation housing 70160 with installation insert for installation in masts and bollard lights. Installation housings can be installed in tubes with a diameter of > 82 x 2 mm and in square tubes with a cross-section of > 80 x 80 x 2 mm. Required installation opening ø 72 mm. Device carrier and flap made of reinforced Ultramid plastic, graphite color. Stainless steel fastening screws. Opening angle of the cover flaps max. 85°. With earthed socket D 16 A · 250 V AC with integrated, increased contact protection. Protection class IP 44 with hinged lid closed.
Lieske Part No.: 910993

BEGA installation housing 70162A with installation insert for installation in masts and bollard lights. Installation housings can be installed in tubes with a diameter of > 82 x 2 mm and in square tubes with a cross-section of > 80 x 80 x 2 mm. Required installation opening ø 72 mm. Housing is made of cast aluminum, color silver. Device carrier and flap made of reinforced Ultramid plastic, color graphite. Stainless steel fastening screws. Opening angle of the cover flaps max. 85°. With rocker switch, normally open, 10 A · 250 V AC. Protection class IP 44 with hinged lid closed.
Lieske Part No.: 1316163

BEGA safety socket 70179 - 10 A · 250 V AC. Swiss standard. With integrated, increased contact protection. Installation insert for installation in BEGA connection column 70380 · 70382 or replacement for BEGA accessories: 70375 · 70376 · 70377 · 70378. Device carrier and flap made of reinforced Ultramid plastic, graphite color. Stainless steel fastening screws. Opening angle of the cover flaps max. 85°.
Lieske Part No.: 874356

BEGA CEE surface-mounted socket TA 70191 in accordance with DIN 49440-1. 16 A, 200-250 V. For installation in the BEGA connection column 71 014, bollard light tube 84096 and replacement for BEGA connection column 71013 and bollard light tube 84095. Protection class IP 44 with closed hinged cover when installed in BEGA connection columns. Connection terminal and protective conductor terminal 4 mm².
Lieske Part No.: 1316161

BEGA mounting box 70217 for mounting a spotlight with a G½ connection thread in accordance with ISO 228 on pillars, walls or under ceilings. Protection class IP 65. Cast aluminum and stainless steel, graphite color. Two cable entries for through-wiring the mains connection cable up to Ø 7-10.5 mm, max. 5 G 1.5 mm². Dimensions: Ø 110 x 45 mm.
Lieske Part No.: 362780

BEGA general fastener with connection thread G½ 70252. For mounting spotlights with connection thread G½ e.g. on walls, ceilings or wooden structures. Stainless steel material number 1.4301. Partial thread ø 8 mm for wood or dowels. Screw-in depth 55 mm. Dowel ø 10 x 50 mm made of polyamide (nylon). Ready for connection with 5 m connection cable H05RN-F 3 G 1 qmm and power plug.
Lieske Part No.: 668065

Lieske Part No.: 1093342

BEGA mounting box 70294A for mounting a spotlight with connection thread G½ in accordance with ISO 228 on pillars, walls or under ceilings. Protection class IP 65. Cast aluminum and stainless steel, color silver. Two cable entries for through-wiring the mains connection cable up to Ø 7-10.5 mm, max. 5 G 1.5 mm². Dimensions: Ø 130 x 50 mm.
Lieske Part No.: 1316159

BEGA traverse 70379 with connection thread G½ according to DIN ISO 288 for mounting a BEGA spotlight on light masts or wall surfaces. Protection class IP 44. Cast aluminum, aluminum and stainless steel, color graphite. One cable entry for mains connection cable up to Ø 10.5 mm, max. 3 x 1.5 mm². For side mounting on a light mast with a minimum diameter of 60 mm.
Lieske Part No.: 505518

BEGA cover 70500. The attachable cover shields the light upwards or downwards. Stainless steel, material no. 1.4301, powder-coated, color graphite.
Lieske Part No.: 873427

BEGA cover 70502. The attachable cover shields the light upwards or downwards. Stainless steel, material no. 1.4301, powder-coated, color graphite.
Lieske Part No.: 209343

BEGA junction box 70555. Housing made of plastic (polyamide), glass fiber reinforced, color graphite. One cable gland for mains connection cable up to Ø 10.5 mm. Connection terminals 5 x 2.5 mm². Dimensions: 250 x 55 x 45 mm.
Lieske Part No.: 103102

BEGA 70588 The BEGA Smart Home Gateway integrates your Plug & Play installation into the local network. The free BEGA Smart Home app can be used to control and configure lights and other Zigbee components that work with the Zigbee radio standard. The BEGA Plug & Play system can be accessed via the Internet from anywhere in the world.
Lieske Part No.: 1333156

BEGA installation housing 70680 for the installation of recessed floor lights, can be rolled over for pressure loads of up to 2000 kg. Stainless steel, material number 1.4301. 1 cable entry for installation pipe max. ø 30 mm. Dimensions: Ø 280 x 191 mm. Installation opening Ø 185 mm.
Lieske Part No.: 594297

BEGA installation housing 70693 for the installation of recessed floor lights, can be rolled over for pressure loads of up to 2000 kg. Stainless steel, material number 1.4301. 1 cable entry for installation pipe max. ø 30 mm. 1.8 m water-resistant connection cable H07RN8-F 3 G 1.5 qmm with built-in water stopper and 1.2 m PVC installation pipe. Dimensions: Ø 270 x 170 mm. Installation opening Ø 138 mm.
Lieske Part No.: 316853

BEGA installation housing 70694 for the installation of recessed floor lights, can be rolled over for pressure loads of up to 2000 kg. Stainless steel, material number 1.4301. 1 cable entry for installation pipe max. ø 30 mm. Dimensions: Ø 350 x 210 mm. Installation opening Ø 254 mm.
Lieske Part No.: 316968

BEGA distribution box 70730 made of plastic for installation in the ground. Casting compound: 2-component hydrocarbon resin 275 ml. With seven cable entries with plug-in seals for cables Ø 5 - 20 mm. 5 connection terminals 5-pin 0.2 to 4 mm². Protection class IP 68. Dimensions: 98 x 98 x 51 mm.
Lieske Part No.: 332892

BEGA installation housing 70745 for the installation of recessed floor lights. Stainless steel, material number 1.4301. 2 opposing cable entries for installation pipes max. ø 30 mm. Dimensions: Ø 150 x 100 mm. Installation opening Ø 66 mm.
Lieske Part No.: 739381

BEGA installation housing 70778 for the installation of recessed floor lights. Stainless steel, material number 1.4301. 2 opposing cable entries for installation pipes max. ø 30 mm. Dimensions: Ø 120 x 100 mm. Installation opening Ø 27 mm.
Lieske Part No.: 382666

BEGA junction box 71064 for installation using wall bracket 71 036. Housing made of plastic (polyamide), glass fiber reinforced, graphite color. One cable gland for mains connection cable up to Ø 10.5 mm. Connection terminals 5 x 2.5 mm². Dimensions: 160 x 65 x 75 mm.
Lieske Part No.: 1139351

BEGA Smart Rotary Dimmer 71148. Radio rotary dimmer with integrated antenna for switching, dimming and regulating the light color of lights. For installation in switch and cavity boxes. Compatible with the switch ranges of common manufacturers. Configuration in the BEGA Smart app. Zigbee 3.0 certified. Configuration via BEGA Smart app. With integrated antenna. Radio frequency 2.4 GHz, 10 dBm (Zigbee + Bluetooth). Range up to 30 m. Standby power: P0 = 0.2 W. Power: P = maximum 2.5 W. Connection terminals 0.5-1.5 mm². Supply voltage: 220-240 V AC/DC 0/50-60 Hz. Operating temperature: -20°C to 65°C. RoHS compliant WEEE 2012/19/EU.
Lieske Part No.: 1713832

BEGA ground piece 71178, made of hot-dip galvanized steel, in accordance with EN ISO 1461. Length 400 mm. A welded construction consisting of a base plate, pipe section and flange plate with threaded inserts with fastening screws M8 x 25 made of stainless steel, material no. 1.4301, side cable entry 70 x 30 mm. For fastening luminaires and light masts with base plate in the ground.
Lieske Part No.: 1055427

Paint care set for outdoor lights
Lieske Part No.: 1055428

BEGA UniLink 71180 mains plug with plug connection to portable lights. 0.5 m connecting cable X05RN-F FEP 2 x 1 mm² + 1G2.5 mm² with national mains plug and a plug connection to the high-performance spotlight with ground spike. Color: black. Plug type F: system commonly used in Germany and Europe. Plug type E: system commonly used in France and Belgium. Mains plug: protection class IP 44. Protection against the ingress of solid foreign bodies > 1 mm and splash water. Connecting plug: protection class IP 67 when plugged in and screwed on. Dustproof and protected against temporary submersion.
Lieske Part No.: 1055426

BEGA screw-on base 71191, made of hot-dip galvanized steel, in accordance with EN ISO 1461 for screwing onto a foundation. 4 long fixing holes, width 9 mm.
Lieske Part No.: 1780549

BEGA anchorage unit 71192, made of hot-dip galvanized steel, in accordance with EN ISO 1461. Length of anchorage unit 1400 mm. 2 opposing cable entries 100 x 30 mm.
Lieske Part No.: 1780548

BEGA connection housing 71246 for mounting surface-mounted floor lights on unpaved surfaces. Connection housing and adapter plate are made of steel, hot-dip galvanized in accordance with EN ISO 1461. 3 threaded inserts with fastening screws M8 x 25 made of stainless steel, pitch circle diameter 132 mm. 3 threaded inserts with fastening screws M6 x 25 made of stainless steel, pitch circle diameter 70 mm.
Lieske Part No.: 1053445

Our bollard lights are either screwed onto a foundation or secured into the ground with a BEGA ground piece. Hot-dip galvanized welded steel construction, consisting of base plate, pipe section and flange plate with threaded inserts made of stainless steel. Stainless steel mounting screws for connecting the lights to the base are included in the scope of delivery. Sales unit: 1 ST.
Lieske Part No.: 1346554

BEGA installation component 13216 ¿ track adapter type D ¿ for use indoors. For the integration of a BEGA system pendant luminaire into surface-mounted and recessed track systems 3-phase EUROSTANDARD-PLUS®. With LED power supply unit, DALI-controllable, for a current of 0.7 A, for the connection of a BEGA system pendant luminaire with a power of max. 29 W. Protection type IP 20. Protection class II. For the connection of a cable pendant 2 x 0.75 qmm, color black. Canopy surface color velvet white. Dimensions: 260 x 35 x height 110 mm.
Lieske Part No.: 666768

BEGA installation component 13218 ¿ track adapter type D ¿ for use indoors. For the integration of a BEGA system pendant luminaire into surface-mounted and recessed track systems 3-phase EUROSTANDARD-PLUS®. With LED power supply unit, DALI-controllable, for a current of 0.5 A, for the connection of a BEGA system pendant luminaire with an output of 2.5 - 21 W. Protection type IP 20. Protection class II. For the connection of a cable pendant 2 x 0.75 qmm, color white. Canopy surface color velvet white. Dimensions: 260 x 35 x height 110 mm.
Lieske Part No.: 666769

BEGA installation component 13220 ¿ track adapter type D ¿ for indoor use. For the integration of a BEGA system pendant light in surface-mounted and recessed track systems 3-phase EUROSTANDARD-PLUS®. With LED power supply, on/off, for a current of 350 mA, for the connection of a BEGA system pendant light with an output of 1.8 - 14.7 W. Protection type IP 20. Protection class II. For the connection of a cable pendant 2 x 0.5 mm², color white. Canopy surface velvet white. Dimensions: 235 x 35 x height 110 mm.
Lieske Part No.: 666770

BEGA installation component 13225 ¿ track adapter type D ¿ for indoor use. For the integration of a BEGA system pendant luminaire into surface-mounted and recessed track systems 3-phase EUROSTANDARD-PLUS®. Track adapter (DALI) for mains voltage ¿ without integrated power supply. Input voltage: 250 V - 50-60 Hz Protection type IP 20. Protection class I. For connecting a cable pendant 5 x 0.75 qmm with a steel cable, color white. Canopy surface color velvet black. Dimensions: 195 x 35 x height 100 mm.
Lieske Part No.: 666771

BEGA installation component 13232 ¿ surface-mounted canopy type B ¿ for indoor use. For mounting and electrical installation of a BEGA system pendant light on sloped and straight suspended ceilings. Suitable for sloped ceilings with a slope of 0-40°. With LED power supply, on/off, for a current of 350 mA, for connecting a BEGA system pendant light with an output of 3.5 - 15 W. Protection type IP 20. Protection class I. Canopy surface velvet white. Dimensions: 175 x 65 x height 65 mm.
Lieske Part No.: 666774

BEGA connection column 13543 with earth spike, portable, for use in private areas. Built-in components: 2 earthed sockets 16 A, 250 volts. Belgian/French standard. Plug type E. Housing and earth spike made of plastic (polyamide), glass fiber reinforced, color graphite. Protection class IP 44. With permanently connected connection cable H07RN-F 3 G 1.5 mm², length 5 m, with plug. Dimensions: 75 x 125 mm. Height above floor 160 mm.
Lieske Part No.: 327897

BEGA Smart Tower 13566 for the LED lighting system BEGA Plug & Play. Housing made of plastic (polyamide), glass fiber reinforced, graphite color. With 5 m connection cable H05RN-F 3 G 1 qmm, black with safety plug. Secondary: 48 V = DC · 0 - 50 W. 4 outputs, individually switchable and dimmable, for connecting lights and distributors. Connected load max. 50 W. Protection class IP 65. Dimensions: Ø 130 x 75 mm.
Lieske Part No.: 328885

BEGA Smart Extender 13568 for the BEGA Plug & Play LED lighting system. Housing made of plastic (polyamide), glass fiber reinforced, graphite color. With connecting cable H05RN-F 3 x 0.75 mm², length 5 m with 48 V plug. 4 outputs, individually switchable and dimmable, for connecting lights and distributors. Protection class IP 65. Dimensions: Ø 130 x 65 mm.
Lieske Part No.: 328887

BEGA 70039 antenna with wall bracket for mounting outside a luminaire. 2.4 GHz with SMA socket. Dimensions Ø 30 x 90 mm.
Lieske Part No.: 321452

BEGA 70049 Zigbee control module IP 20 with integrated 2.4 GHz antenna and DALI interface for use indoors and wherever a higher protection class is not required. DALI control output for joint switching and dimming of 5 DALI operating devices. Output for operating devices with a switching capacity of 2000 W · cos phi = 1, 1000 VA · cos phi = 0.5. Can be used as a router or coordinator in Zigbee networks. Voltage 100 - 240 V, 50 / 60 Hz.
Lieske Part No.: 321453

BEGA ZigBee circuit breaker no. 71021, with integrated 2.4 GHz antenna for DIN rail mounting. The control module can be used as a router or coordinator in ZigBee networks. Relay contact with a switching capacity of 3,600 VA, 16 A. Two inputs for conventional pushbutton or binary contacts. Supply voltage: 220-240 volts, 50 Hz. Operating temperature: -20° C to 45° C.
Lieske Part No.: 321454

BEGA Zigbee control module 71052 with integrated 2.4 GHz antenna for installation in switch and cavity boxes. The control module can be used as a router or coordinator in Zigbee networks. Module for installation in switch and cavity boxes with integrated 2.4 GHz antenna. Switching contact (triac) with a switching capacity of 2 x 500 VA · 2 A. Two inputs for conventional button or binary contacts. Flexible connection wires with connection terminals 2.5 mm², length 140 mm. Supply voltage: 220-240 V - 50 Hz.
Lieske Part No.: 321458

BEGA screw-on base 71199, made of hot-dip galvanized steel, in accordance with EN ISO 1461 for screwing onto a foundation. Powder-coated, color graphite. 4 mounting holes, width 30 mm.
Lieske Part No.: 667055

BEGA connection column 71228, stationary. Built-in components: 4 earthed sockets 16 A, 250 volts. Plug type F: system widely used in Germany and Europe. Protection class IP 44. Cast aluminum, aluminum and stainless steel coating technology BEGA Unidure®, color graphite. With mounting plate for screwing onto a foundation or onto the anchor unit 70895. 3 cable entries for through-wiring the mains connection cable max. ø 17 mm. Dimensions: 105 x 550 x 165 mm.
Lieske Part No.: 675383

BEGA connection column 71229, stationary. Built-in components: 3 earthed sockets 16 A, 250 volts. Plug type F: system common in Germany and Europe. 1 universal on/off switch 1-pole 10 A, 250 V ?. Protection class IP 44. Cast aluminum, aluminum and stainless steel coating technology BEGA Unidure®, color graphite. 3 cable entries for through-wiring the mains connection cable max. ø 17 mm. With mounting plate for screwing onto a foundation or onto the anchor unit 70895. Dimensions: 105 x 550 x 165 mm.
Lieske Part No.: 675384