Wire rope suspension with feed (1 piece) for DALI, height adjustable, ceiling box made of ABS in black, silver or white, ceiling box for screw mounting, fastening in profile groove from the top of the housing via suspension slide, connecting cable (5 x 1.5 mm², pre-assembled, length: 3000 mm), ceiling box silver/black with black connecting cable and ceiling box white with white connecting cable
Standards: CE, RoHS
Length: 3000 mm
Weight: 0.665 kg
Lieske Part No.: 2023407

Wire rope suspension with feed (1 piece) for DALI, height adjustable, ceiling box made of ABS in black, silver or white, ceiling box for screw mounting, fastening in profile groove from the top of the housing via suspension slide, connecting cable (5 x 1.5 mm², pre-assembled, length: 3000 mm), ceiling box silver/black with black connecting cable and ceiling box white with white connecting cable
Standards: CE, RoHS
Length: 3000 mm
Weight: 0.665 kg
Lieske Part No.: 2023408

Wire rope suspension with feed (1 piece) for DALI, height adjustable, ceiling box made of ABS in black, silver or white, ceiling box for screw mounting, fastening in profile groove from the top of the housing via suspension slide, connecting cable (5 x 1.5 mm², pre-assembled, length: 3000 mm), ceiling box silver/black with black connecting cable and ceiling box white with white connecting cable
Standards: CE, RoHS
Length: 3000 mm
Weight: 0.665 kg
Lieske Part No.: 2023480

Wire rope suspension with feed (1 piece) for DALI, height adjustable, ceiling box made of ABS in black, silver or white, ceiling box for screw mounting, fastening in profile groove from the top of the housing via suspension slide, connecting cable (5 x 1.5 mm², pre-assembled, length: 5000 mm), ceiling box silver/black with black connecting cable and ceiling box white with white connecting cable
Standards: CE, RoHS
Length: 5000 mm
Weight: 0.988 kg
Lieske Part No.: 2014711

Connector set for surfaces and corners >= 45° (2 pieces), for joining individual profiles with mitre on flat surfaces, material: die-cast zinc, fastening in profile groove via opposing eccentric locks, 5-pin connection cable included
Standards: CE, RoHS
Dimensions (LxWxH): 145 x 4 x 15 mm
Weight: 0.120 kg
Lieske Part No.: 1003394

Opal cover piece made of polycarbonate, suitable for acrylic glass profile LK-Z 045 AOV-001/..., tool-free snap-in into light channel profile
Standards: CE, RoHS
Dimensions (LxWxH): 2 x 45 x 15 mm
Weight: 0.003 kg
Lieske Part No.: 1003742

End piece acrylic glass profile opal protruding (height: 13 mm, length: 1500 mm), material: PMMA, suitable for Lichtkanal 070 profiles LK-P 045.001, LK-P 045.003 and LK-P 045.005.1, tool-free snap-in into Lichtkanal profile
Standards: CE, RoHS
Dimensions (LxWxH): 1500 x 45 x 13 mm
Weight: 0.599 kg
Lieske Part No.: 1003743

End cap (2 pieces) made of polycarbonate, suitable for Lichtkanal 060 profiles LK-P 060.001, tool-free snap-in into profile
Standards: CE, RoHS
Dimensions (LxWxH): 60 x 5 x 50 mm
Weight: 0.070 kg
Lieske Part No.: 1597903

End cover (2 pieces) made of polycarbonate, consisting of end cover and attachable cover edge, suitable for Lichtkanal 060 profile LK-P 060.002, tool-free snap-in into profile
Standards: CE, RoHS
Dimensions (LxWxH): 69 x 5 x 55 mm
Weight: 0.095 kg
Lieske Part No.: 1597901

Wall bracket (1 piece) made of sheet steel, can be hung in profile, simple screw mounting
Standards: CE, RoHS
Dimensions (LxWxH): 88 x 58 x 55 mm
Distance from wall: 32 mm
Weight: 0.114 kg
Lieske Part No.: 1778526

Opal acrylic glass pre-attached (length to measure), opal acrylic glass profile protruding (10 mm) made of PMMA, suitable for Lichtkanal 060 profile LK-P 060.002, tool-free snap-in into Lichtkanal profile
Standards: CE, RoHS
Dimensions (WxH): 69 x 10 mm
Weight: 0.348 kg
Lieske Part No.: 1598016

Opal cover piece made of polycarbonate, suitable for acrylic glass profile LK-Z 060 AOV-002/..., tool-free snap-in into light channel profile
Standards: CE, RoHS
Dimensions (LxWxH): 2 x 69 x 10 mm
Weight: 0.007 kg
Lieske Part No.: 1598014

End piece acrylic glass profile opal protruding (height: 10 mm, length: 1500 mm), material: PMMA, suitable for Lichtkanal 060 profile LK-P 060.002, tool-free snap-in into Lichtkanal profile
Standards: CE, RoHS
Dimensions (LxWxH): 1500 x 69 x 10 mm
Weight: 0.522 kg
Lieske Part No.: 1598015

Wire rope suspension without feed (1 piece), height adjustable, ceiling fastener for screw mounting, fastening in profile groove from top of housing via suspension slide
Standards: CE, RoHS
Length: 3000 mm
Weight: 0.048 kg
Lieske Part No.: 1778512

Wire rope suspension without feed (1 piece), height adjustable, ceiling fastener for screw mounting, fastening in profile groove from top of housing via suspension slide
Standards: CE, RoHS
Length: 5000 mm
Weight: 0.065 kg
Lieske Part No.: 1597899

Adapter for 3-phase power rail (suitable for wire rope suspension), housing made of polycarbonate, tensile load: max. 50 N, bending moment: max. 2.5 Nm, mechanical locking and phase selection, on/off switch, cable diameter: max. 7.5 mm
Standards: UKCA, CE, RoHS
Dimensions (LxWxH): 68 x 52 x 70 mm
Weight: 0.051 kg
Lieske Part No.: 2069739

Spotlight with LED array. Can be used in industrial plants at different light point heights and, among other things, for illuminating buildings and advertising spaces and illuminating parking lots. Luminaire housing made of weatherproof and UV-resistant, glass fiber reinforced plastic and reflector housing made of die-cast aluminum, similar to RAL 9005. Reflector housing can be swiveled and locked by 90°. Lamp and device compartment thermally separated. Sealing system consisting of age-resistant, dimensionally stable silicone/synthetic rubber. Can be used indoors and outdoors in accordance with protection class IP 65. Protection class II. Cover pane made of single-pane safety glass (ESG) or PC (shatterproof), crystal clear with internal aluminum reflector (MIRO-SILVER®). Luminaire ready for installation and connection. Built-in operating device, supply voltage 230-240 V AC/DC. Two M20 cable membranes on the front. Two additional, concealed M20 cable membranes on the rear. Ceiling or wall mounting using an aluminum mounting bracket.
Lieske Part No.: 1894994

Spotlight with LED array. Can be used in industrial plants at different light point heights and, among other things, for illuminating buildings and advertising spaces and illuminating parking lots. Luminaire housing made of weatherproof and UV-resistant, glass fiber reinforced plastic and reflector housing made of die-cast aluminum, similar to RAL 9005. Reflector housing can be swiveled and locked by 90°. Lamp and device compartment thermally separated. Sealing system consisting of age-resistant, dimensionally stable silicone/synthetic rubber. Can be used indoors and outdoors in accordance with protection class IP 65. Protection class II. Cover pane made of single-pane safety glass (ESG) or PC (shatterproof), crystal clear with internal aluminum reflector (MIRO-SILVER®). Luminaire ready for installation and connection. Built-in operating device, supply voltage 230-240 V AC/DC. Two M20 cable membranes on the front. Two additional, concealed M20 cable membranes on the rear. Ceiling or wall mounting using an aluminum mounting bracket.
Lieske Part No.: 1956023

Spotlight with LED array. Can be used in industrial plants at different light point heights and, among other things, for illuminating buildings and advertising spaces and illuminating parking lots. Luminaire housing made of weatherproof and UV-resistant, glass fiber reinforced plastic and reflector housing made of die-cast aluminum, similar to RAL 9005. Reflector housing can be swiveled and locked by 90°. Lamp and device compartment thermally separated. Sealing system consisting of age-resistant, dimensionally stable silicone/synthetic rubber. Can be used indoors and outdoors in accordance with protection class IP 65. Protection class II. Cover pane made of single-pane safety glass (ESG) or PC (shatterproof), crystal clear with internal aluminum reflector (MIRO-SILVER®). Luminaire ready for installation and connection. Built-in operating device, supply voltage 230-240 V AC/DC. Two M20 cable membranes on the front. Two additional, concealed M20 cable membranes on the rear. Ceiling or wall mounting using an aluminum mounting bracket.
Lieske Part No.: 1956024

Cross-braced frames for surface mounting of panel lights. Product features: Frame made of extruded aluminum. Product advantages: Ready to install thanks to pre-assembled magnetic corners. Cross bracing for increased stability.
Lieske Part No.: 1349977

High-voltage version for halogen GU10 GZ10 lamps +
white

Color: white
Price For: 1
Lieske Part No.: 116569

LED strip connector with a cable length of 5cm. For solder-free connection of 2 LED strips - even around corners.
Lieske Part No.: 1989560

Lamp holder for snapping into or onto indicator lights.
Lieske Part No.: 599785

Structural accessories L-shaped node for SDT IP20. Node suitable for pendant mounting, order through-wiring set SDT-KDV separately. Suspension is not possible on the light strip connector, accessory for SDT system.
Lieske Part No.: 975517

Structural accessories Wiring kit for node 2xmale+female 7-pin, 7x2.5mm², 600mm for SDT. Wiring kit node Wiring kit node 2xmale+female 7-pin, 7x2.5mm², 600mm for SDT. Connection plugs and sockets are included in delivery. Accessories for SDT system.
Lieske Part No.: 815520

Structural accessories Rail connector detachable for SRT IP64. Connector IP64
Lieske Part No.: 1867573

Protective accessories front side for SRT. End caps IP20 (2 pcs.)
Lieske Part No.: 1867565

Installation accessories installation spring set for Agila 600/625 with cut-out ceilings. Installation set for cut-out ceilings on Agila 600/625.
Lieske Part No.: 1867563

Structural accessories for alevo-AVAWF vw. mechanical light strip connector for alevo wallwasher pendant mounting
Lieske Part No.: 2037163

Mounting accessories universal mounting aid for alevo-AVAMP surface mounts, for multiple use and time-saving marking of the mounting holes. Mounting aid for the mounting holes.
Lieske Part No.: 2116185

Structural accessories LB connector with cable feedthrough and through-wiring for ballea. Connector with cable feedthrough and through-wiring, straight arrangement for ballea-BAM.
Lieske Part No.: 1980656

Renovation solution greenKit-Type1 for Cubus and Lura T5, module length/1500, simple, quick installation with magnetic closure, housing made of painted sheet steel. Perfectly suited as a replacement for a conventional T5 lamp. Direct light distribution, in combination with the grid and the linear lens made of satin PMMA, the glare control is maintained. The uniform light source ensures homogeneous illumination, the glare limitation of the existing luminaire is maintained.
Lieske Part No.: 2094435

Renovation solution greenKit-Type1 for Cubus and Lura T5, module length/1500, simple, quick installation with magnetic closure, housing made of painted sheet steel. Perfectly suited as a replacement for a conventional T5 lamp. Direct light distribution, in combination with the grid and the linear lens made of satin PMMA, the glare control is maintained. The uniform light source ensures homogeneous illumination, the glare limitation of the existing luminaire is maintained.
Lieske Part No.: 2094436

Light connector F-LINE, 100mm, silver, 1 piece, for pendant mounting.
Lieske Part No.: 348193

End piece for EBRPL 1..
Lieske Part No.: 420096

Mains supply unit, 5-pin, single-wire IP20/54, 1 piece
Lieske Part No.: 755407

Mains supply unit, 7-pin, single-wire IP20/54, 1 piece
Lieske Part No.: 714310

Mains feed. Power cable 5-pin, single-phase IP20/54, oil-resistant, 1 pc.
Lieske Part No.: 1013063

3-phase mains monitoring relay with test function. Suitable for use in systems in accordance with DIN VDE0108. For installation in sub-distribution boards to detect undervoltage and power failure in single-phase or three-phase networks with a width of 18 mm. With test function and status LED for each input phase.
Lieske Part No.: 244007

ISO socket for line lamps. Single plastic socket. Without strain relief for connecting cable.
Lieske Part No.: 379047

Multi-adapter for 3-phase power rails from all well-known manufacturers and for RZB 3-phase DALI power rails, plastic. Rotatable phase selector switch with off switch and mechanical locking. With protective contact socket. Only suitable for lighting or lighting accessories!
Lieske Part No.: 443096

Multi-adapter for 3-phase busbars from all well-known manufacturers, plastic. Rotatable phase selector switch with off switch and mechanical locking.
Lieske Part No.: 474645

Accessories: Installation box for point outlet. Plastic housing. Suitable for ceiling thicknesses 0 mm to 35 mm.
Lieske Part No.: 659454

RZB-Lighting, white, L 300
Lieske Part No.: 251848

RZB-Lighting, white, L 600
Lieske Part No.: 675722

Accessories: Mounting set for on-site rope or chain suspension. With mounting plate and strain relief (for GSUN 4 with flat cover only suitable for lighting applications).
Lieske Part No.: 141493

The TW 500 switch is a switching and network monitoring module that enables mixed operation of escape sign and emergency lights in different circuit types on the permanent circuit of a group or central battery system. The prerequisite is that the lights are suitable for operation on AC and DC and, if applicable, the operating devices are suitable for use in emergency lighting in accordance with EN 50172.
Lieske Part No.: 260122

Ceiling mounting set consisting of 4 mounting cylinders (ø 30 mm, H 38 mm). Not suitable for Tunable White version
Lieske Part No.: 704121

Accessories for an outdoor spotlight from the Lightstream® LED Maxi series: Hot-dip galvanized steel mast attachment. Suitable for mounting on the mast top. With stainless steel fastening screw set. Cable feed-through in the mast as strain relief and rainwater protection.
Lieske Part No.: 631678

Accessories for the Lightstream LED Maxi series of outdoor spotlights: Mast attachment for two Lightstream® LED Maxi. Axis-symmetrical arrangement rotated 180°. Suitable for mounting on the mast top. Mast attachment made of hot-dip galvanized sheet steel. With stainless steel fastening screw set. Cable feed-through in the mast as strain relief and rainwater protection.
Lieske Part No.: 632053