Renovation panel for covering existing ceiling cutouts in renovation applications. For ceiling cutouts Ø 230 - 260 mm. Colour white. Accessories available for 10 years after the invoice date subject to reasonable changes in the interests of progress.
Lieske Part No.: 1331198

Mounting brackets for installing the lights in ceilings with visible and concealed support rails and sawn ceiling openings. For BelvisoAct C2 semi-recessed lights. 1 set (4 pieces). Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 1327115

Lieske Part No.: 291907

Lieske Part No.: 291921

Installation housing for round surface-mounted luminaires PolaronIQ WD1/WD1D. For flush-mounting the luminaire in walls and ceilings. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 846343

Installation housing for round surface-mounted luminaires PolaronIQ WD2/WD2D, WD1-2/ WD1-2D. For flush-mounting the luminaire in walls and ceilings. For use in combination with concrete casting box Polaron IQ WD2 BE. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 846590

Semi-recessed housing for round surface-mounted luminaire PolaronIQ WD1. Packaging unit consisting of 1 piece. Accessories available for 10 years after the invoice date subject to reasonable changes in the interest of progress.
Lieske Part No.: 846321

Semi-recessed housing for Polaron IQ WD2/WD2D, WD1-2/WD1-2D. Packaging unit consisting of 1 piece. Accessories available for 10 years after the invoice date subject to reasonable changes in the interest of progress.
Lieske Part No.: 846540

Mounting accessories for sawn ceiling openings and system ceilings with concealed support rails. For ArimoS MRX LED recessed luminaires M73 / M84. For Creavo recessed luminaires M84. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 1327241

Semi-recessed housing for Polaron IQ WD2/WD2D, WD1-2/WD1-2D. With reinforced support plate, system dimensions 600 x 600 (M73). For downlight installation in closed ceilings with low load-bearing capacity. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 846564

Semi-recessed housing for Polaron IQ WD2/WD2D, WD1-2/WD1-2D. With reinforced support plate, system dimensions 625 x 625 (M84). For downlight installation in closed ceilings with low load-bearing capacity. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 846578

Installation housing for round surface-mounted luminaires PolaronIQ WD2/WD2D. With reinforced support plate, system dimensions 600 x 600 (M73). For downlight installation in closed ceilings with low load-bearing capacity. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 846719

Installation housing for round surface-mounted luminaires PolaronIQ WD2/WD2D. With reinforced support plate, system dimensions 600 x 600 (M73). For downlight installation in closed ceilings with low load-bearing capacity. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 846738

In-ground pot made of weather-resistant PVC pipe. For LED in-ground spotlight Lutera 100.
Lieske Part No.: 590417

Mounting accessories for flush installation of the ceiling canopy in sawn ceilings. For luminaire type PolaronIQ H2... . Accessories available for 10 years after the invoice date subject to reasonable changes in the interests of progress.
Lieske Part No.: 1337001

Concrete casting housing for round surface-mounted luminaires PolaronIQ WD 2..., WD 1-2... . When using the concrete casting housing, the installation housing (Polaron IQ WD2 C1) must be ordered separately to attach the luminaires. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 661124

Mounting accessories for installation in system ceilings with concealed support rails. For ArimoS MRX LED recessed luminaires M46 / M57. For Creavo recessed luminaires M57 / M59. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 608702

Mounting plate for reinforcing ceiling panels and for installing the downlight in ceilings with a low load-bearing capacity. For Inplana C07 LED downlight. Made of sheet steel, Sendzimir galvanized. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 1344962

Concrete casting housing for the installation of downlights including ballast box in concrete ceilings. For luminaire type Inplana C09... . Accessories available for 10 years after the invoice date subject to reasonable changes in the interests of progress.
Lieske Part No.: 147867

For downlight installation in modular ceilings and closed ceilings with low load-bearing capacity. Accessories for use in modular ceilings, module 600. For luminaire type Inplana C09... . Made of sheet steel, Sendzimir galvanized. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 1344961

For downlight installation in modular ceilings and closed ceilings with low load-bearing capacity. Accessories for use in modular ceilings, module 625. For luminaire type Inplana C09... . Made of sheet steel, Sendzimir galvanized. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 1344788

Mast clamp made of stainless steel. For luminaire type Faciella.
Lieske Part No.: 1352044

Accessories for installing lights in panel ceilings (module 100). Suitable for Solvan Flow C1/D1 recessed lights. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 1346706

Accessories for installing lights in panel ceilings (module 100). Suitable for recessed lights Solvan Flow C2/C3, D2/D3. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 1346705

Lieske Part No.: 876851

3-point cable suspension with transparent power cable and white ceiling connection box. With 3-pole connection cable 3 x 0.75 mm2. For suspension lengths up to 2000 mm. Accessories for Onplana D07... . Accessories available for 10 years after the invoice date subject to reasonable changes in the interest of progress.
Lieske Part No.: 214790

Mast attachment made of welded, hot-dip galvanized steel tube for mounting 2 side-mounted lights. For masts with mast top Ø 76 mm. Supporting piece Ø 60 x 200 mm, angle of inclination 5°. With plastic cover similar to RAL 7032, pebble gray. Fastened to the mast using 2 x 3 mounted hexagon socket screws M 8x12 (SW 4 mm) made of stainless steel. For the Cuvia, Lumega IQ, Lumega series, an additional reducer 0970/60 is required for each light.
Lieske Part No.: 643188

Ceiling mounting accessories, 2-part. For LED high bay spotlights Mirona Fit 2L/4L/8L. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 176921

Adjustable wall mounting bracket, 2-part. For LED high bay spotlights Mirona Fit 2L/4L. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interest of progress.
Lieske Part No.: 1351877

Lieske Part No.: 713101

Mains connection cable for pendant lights type: Solvan Flow H...ETDD / ...ET+EB3. Pendant light, direct-indirect light distribution. 5-core version, Ø 1.5 mm2. Cable length 2000 mm. With integrated snap-in strain relief. Accessories available for 10 years after the invoice date subject to reasonable changes in the interests of progress.
Lieske Part No.: 1346247

Head pieces made of PMMA. For LED surface-mounted and suspended luminaires Solvan Flow D/H. For individual luminaires and light strip ends. Color white. Delivery includes 2 pieces. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 450158

Head pieces made of PMMA. For LED surface-mounted and hanging luminaires Solvan Flow D/H. For individual luminaires and light strip ends. Color: silver-gray. Delivery includes 2 pieces. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 1346245

Lieske Part No.: 353586

Lieske Part No.: 353612

Steel band suspension, 1 pair, rustproof, 1.0 m long, for damp room luminaires.
Lieske Part No.: 628373

Mounting accessories for Nextrema 4000-8... / 6000-8... /Olexeon/Oleveon Fit/Aragon Fit/. Bracket for suspended mounting. Accessories available for 10 years after the invoice date, subject to reasonable modifications in the interests of improvement.
Lieske Part No.: 1346439

Accessory set for achieving protection class IP 54 when mounted on the ceiling. Specifically for lights from the Onplana D07 series. Consists of a replacement cover with an embedded seal for the ceiling finish and a sealing ring for use between the light head and the surface-mounted housing. Made of sheet steel, powder-coated white. Outside diameter 234 mm. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 1186931

Ceiling connection box, square, white. For connecting the power supply to ceiling outlets. Dimensions (L x W): 132.8 mm x 67.2 mm, height 30.6 mm.
Lieske Part No.: 1349820

Ceiling connection box, square, silver-grey. For connecting the power supply to ceiling outlets. Dimensions (L x W): 132.8 mm x 67.2 mm, height 30.6 mm.
Lieske Part No.: 1350305

Ceiling connection box, square, white. With integrated light management module LiveLink WLAN controller. For connecting the power supply cable to ceiling outlets. Dimensions (L x W): 361 mm x 67.2 mm, height 31 mm.
Lieske Part No.: 1350297

Rope suspension for suspension lengths up to: 2000 mm. For lights from the Luceo Slim series. Weight 0.1kg.

Lieske Part No.: 1350265

Y-cable suspension for suspension lengths up to: 2000 mm. For pendant lights from the Luceos series. Dimensions (L x W): 160 mm x 120 mm, H = 20 mm. Packaging unit 1 piece, for one suspension point. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 1350257

Ceiling mounting system for luminaires from the Luceos series. The ceiling mounting system already includes a connection head piece. The second head piece must be ordered separately. For ceiling mounting luminaires from the Luceos D2 series. Made of sheet steel, white powder-coated. Dimensions (L x W): 1515 mm x 239.5 mm, H = 35 mm. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 1951249

Installation accessories for Actison Fit lights in sawn ceilings (310 mm). Sheet steel, powder-coated, white. Ceiling cutout 1555 mm x 335 mm. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 1102600

Standpipe for bollard light. For use in the modular LED bollard light system 8841/8851. With safety socket 230 V, 16 A. The safety socket is equipped with increased contact protection. Height 836.5 mm, outer diameter 170 mm. Color anthracite, similar to DB703 with metallic effect, highly weatherproof, powder-coated. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interest of progress.
Lieske Part No.: 1593606

Casting housing with fastening set for flush installation of the Invego Square W2 wall light. A special tool for removing the light is included in the delivery.
Lieske Part No.: 1866258

Casting housing with fastening set for flush installation of the Invego wall light Circ W2. A special tool for removing the light is included in the delivery.
Lieske Part No.: 1866278

Casting housing with fastening set for flush installation of the Invego wall light Rec W1. A special tool for removing the light is included in the scope of delivery.
Lieske Part No.: 1866253

Tool for quickly and safely dismantling the recessed downlight and separating the reflector from the rest of the luminaire body. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 1868622