Accessories for an outdoor spotlight from the Lightstream® LED Maxi series: Hot-dip galvanized steel mast attachment. Suitable for mounting on the mast top. With stainless steel fastening screw set. Cable feed-through in the mast as strain relief and rainwater protection.
Lieske Part No.: 631678

Accessories for the Lightstream LED Maxi series of outdoor spotlights: Mast attachment for two Lightstream® LED Maxi. Axis-symmetrical arrangement rotated 180°. Suitable for mounting on the mast top. Mast attachment made of hot-dip galvanized sheet steel. With stainless steel fastening screw set. Cable feed-through in the mast as strain relief and rainwater protection.
Lieske Part No.: 632053

Accessories for the Lightstream LED Maxi series of outdoor spotlights: Mast attachment for two Lightstream® LED Maxi. Axis-symmetrical arrangement rotated 180°. Suitable for mounting on the mast top. Mast attachment made of hot-dip galvanized and powder-coated sheet steel. With stainless steel fastening screw set. Cable feed-through in the mast as strain relief and rainwater protection.
Lieske Part No.: 632066

Flat floor-mounted housing made of fibre-reinforced plastic (polypropylene) for conduit cabling.
Lieske Part No.: 660008

Deep floor installation housing made of fiber-reinforced plastic (polypropylene) for underground cable supply lines.
Lieske Part No.: 860908

Base piece for the deep floor installation housing.
Lieske Part No.: 1334194

Accessory for Lightstream LED Maxi series outdoor spotlights with rotationally symmetrical light distribution: replacement mounting bracket. For attachment to the mast top in a horizontal position.
Lieske Part No.: 860942

Accessories for Lightstream LED Maxi series outdoor spotlights with asymmetrical light distribution: replacement mounting bracket. For mounting on the wall or in a vertical position on the floor or ceiling.
Lieske Part No.: 860944

Wall bracket for mounting on the wall. Projection 500 mm, unpainted. Spotlight mounting on the front angle profile either vertically or horizontally. Concealed cable routing in the profile tube with additional inlet in front of the mounting plate.
Lieske Part No.: 342586

Wall bracket for mounting on the wall. Projection 1000 mm, unpainted. Spotlight mounting on the front angle profile either vertically or horizontally. Concealed cable routing in the profile tube with additional inlet in front of the mounting plate.
Lieske Part No.: 550768

Ground piece made of aluminium with anti-sink protection and fastening set.
Lieske Part No.: 861269

Ground piece made of aluminium with anti-sink protection and fastening set.
Lieske Part No.: 145352

Installation frame made of powder-coated sheet steel, white. For mounting the light in suspended ceilings. Installation depth at least 300 mm.
Lieske Part No.: 619515

Ceiling and wall mounting bracket made of metal, black. Wall mounting: unshielded and with reflector.
Lieske Part No.: 145355

Pendant set, whiteAccessories, D 202 H 56LP 1500
Lieske Part No.: 1344171

Retaining clamps, unpaintedAccessories, L 81 W 18 H 116
Lieske Part No.: 550799

Powder-coated sheet steel housing. Downlight can be locked without tools. For recessed downlight Toledo Flat Square 110x110. Not suitable for DALI versions.
Lieske Part No.: 1344168

Powder-coated sheet steel housing. Downlight can be locked without tools. For recessed downlight Toledo Flat Square 172x172.
Lieske Part No.: 1344167

Powder-coated sheet steel mounting housing. Downlight can be locked without tools. For recessed downlight Toledo Flat Square 225x225. Not suitable for version with HF motion detector.
Lieske Part No.: 145358

Powder-coated sheet steel housing. Downlight can be locked without tools. For recessed downlight Toledo Flat Square 300x300.
Lieske Part No.: 1344166

Ground piece made of aluminium with anti-sink protection and fastening set.
Lieske Part No.: 619612

Ground piece made of aluminium with anti-sink protection and fastening set.
Lieske Part No.: 1341203

Clip-on glare shield. Rotates 360 degrees. Powder-coated stainless steel.
Lieske Part No.: 1352388

Blind plug for screw cap.
Lieske Part No.: 1586831

Insert frame for grid ceilings, module size 600. Frame made of sheet steel, powder-coated. For recessed downlight Toledo Flat D 495.
Lieske Part No.: 1586861

Insert frame for grid ceilings, module size 625. Frame made of sheet steel, powder-coated. For recessed downlight Toledo Flat D 495.
Lieske Part No.: 1343845

RZB-Lighting, grey, D 48 H 50
Lieske Part No.: 1586846

Mounting frame made of powder-coated sheet steel, white.
Lieske Part No.: 2091062

Accessories: Mounting box made of white powder-coated metal.
Lieske Part No.: 2092047

Accessories: Mounting box made of white powder-coated metal.
Lieske Part No.: 2091063

Plastic installation housing. Can be shortened on site.
Lieske Part No.: 2090228

Swivel mounting 0° - 90° for mounting profile 23
Lieske Part No.: 2096220

Chrome-plated tubular pendulum, including power cable and fastening material. Special pendulum lengths available on request.
Lieske Part No.: 1352086

Chrome-plated tubular pendulum, including power cable and fastening material. Special pendulum lengths available on request.
Lieske Part No.: 1352099

Chrome-plated tubular pendulum, including power cable and fastening material. Special pendulum lengths available on request.
Lieske Part No.: 1352098

Ground spike, blackAccessories, D 90 H 245
Lieske Part No.: 1597912

Attachment frame for ceiling light Centryxx IP65, for use as a wall light. Frame made of sheet steel, powder-coated.
Lieske Part No.: 1352095

Mounting frame made of powder-coated sheet steel, white.
Lieske Part No.: 1597927

Accessories: Mounting box made of white powder-coated metal.
Lieske Part No.: 2092048

Accessories: Mounting box made of white powder-coated metal.
Lieske Part No.: 2091064

Fabric shade with classic chintz fabric. Cylinder shape. Chintz outer surface, color according to color code (FC). Color code must be specified when ordering. Order satin cover as a separate accessory.
Lieske Part No.: 1352082

Accessories: Fastening set for on-site rope or chain suspension. With mounting plate and strain relief.
Lieske Part No.: 1351327

Accessories: Fastening set for on-site rope or chain suspension. With mounting plate and strain relief.
Lieske Part No.: 2090229

Bracket for subsequent tool-free installation for attaching a fabric shade. Powder-coated metal ring. With M4 threaded pins and knurled nuts made of plastic. For surface-mounted/pendant light Toledo Flat Round D 150. For mounting the Toledo Flatliner 200 fabric shade.
Lieske Part No.: 2090244

Bracket for subsequent tool-free installation for attaching a fabric shade. Powder-coated metal ring. With M4 threaded pins and knurled nuts made of plastic. For surface-mounted/pendant light Toledo Flat Round D 192. For mounting the Toledo Flatliner 242 fabric shade.
Lieske Part No.: 1351326

Bracket for subsequent tool-free installation for attaching a fabric shade. Powder-coated metal ring. With M4 threaded pins and knurled nuts made of plastic. For surface-mounted/pendant light Toledo Flat Round D 257. For mounting the Toledo Flatliner 307 fabric shade.
Lieske Part No.: 1351325

RZB-Lighting, black, L 170 W 71 H 35
Lieske Part No.: 2090246

3 pieces
Lieske Part No.: 2090248

Accessories: Mounting plate for ceiling mounting with holes in suspension brackets for hanging various pendulum suspensions. Optional for on-site rope or chain suspension.
Lieske Part No.: 1351323

Accessories for lights for central emergency power supply: Pendant set. Consists of ceiling canopy (D 108 mm, H 53 mm) plastic (ABS) white. Ceiling plate including connection terminal and quick fastening for pendant tube. Pendant tube d 10 mm chrome-plated metal, can be shortened on site. Mounting plate for attachment to the light. With connecting cable through pendant tube.
Lieske Part No.: 1351322