Rail made of profiled steel sheet coated with white polyester resin enamel.

Conductor embedded in an integrated Stromleitprofil. 5 network cables and 2 x 2 conductors for the integration of emergency based on two separate circuits independently and as a 2 wire control line. Simple connection via electrical feed-set. Dimensions: 25 x 6 x 54 mm, Weight: 4.5 kg Type: 22
28 42 Quantity:
ST.
Lieske Part No.: 970050

Rail made of profiled steel sheet coated with white polyester resin enamel.

Conductor embedded in an integrated Stromleitprofil. 5 network cables and 2 x 2 conductors for the integration of emergency based on two separate circuits independently and as a 2 wire control line. Simple connection via electrical feed-set. Dimensions: 35 x 6 x 54 mm, weight: 6,
kg Type: 22
28 77 Quantity:
ST.
Lieske Part No.: 704508

10 year block battery, type VLRA, sealed, rechargeable 10 year design life at 20° ambient temperature High performance grid plates (lead/calcium) Fleece technology ABS housing and cover Recessed poles with copper core, screwable inside Extremely low gassing, low self-discharge No transport restrictions 100% recyclable Maintenance-free over the entire service life The battery pack must not be stored without a battery charge for longer than 2 months after delivery. The battery pack must be connected to the system after 2 months at the latest. If these instructions are not followed, any liability or warranty claims will be rejected.
Lieske Part No.: 771199

10 year block battery, type VLRA, sealed, rechargeable 10 year design life at 20° ambient temperature High performance grid plates (lead/calcium) Fleece technology ABS housing and cover Recessed poles with copper core, screwable inside Extremely low gassing, low self-discharge No transport restrictions 100% recyclable Maintenance-free over the entire service life The battery pack must not be stored without a battery charge for longer than 2 months after delivery. The battery pack must be connected to the system after 2 months at the latest. If these instructions are not followed, any liability or warranty claims will be rejected.
Lieske Part No.: 570539

10 year block battery, type VLRA, sealed, rechargeable 10 year design life at 20° ambient temperature High performance grid plates (lead/calcium) Fleece technology ABS housing and cover Recessed poles with copper core, screwable inside Extremely low gassing, low self-discharge No transport restrictions 100% recyclable Maintenance-free over the entire service life The battery pack must not be stored without a battery charge for longer than 2 months after delivery. The battery pack must be connected to the system after 2 months at the latest. If these instructions are not followed, any liability or warranty claims will be rejected.
Lieske Part No.: 453464

L-connector white. Dimensions: 135mm x 365mm x 60mm. Weight: 1.62 kg Type: 22,157,274


Quantity: 1 unit.
Lieske Part No.: 328209

T-connector white. Dimensions: 500mm x 365mm x 60mm. Weight: 2.18 kg Type: 22,157,279


Quantity: 1 unit.
Lieske Part No.: 655001

Suspension type: 22
57562 item:
ST.
Lieske Part No.: 925869

Strain relief made of galvanized sheet steel, with integrated device for clamping the feed cables.
Lieske Part No.: 926833

Elliptical canopy with 5 single-pole terminals in white made of plastic polycarbonate (PC) with clamping options.
Lieske Part No.: 377195

Optionaler mechanischer Kanalverbinder (1 Stück)
Lieske Part No.: 365172

CG surface-mounted optics made of white powder-coated aluminum, consisting of two reflector wings to reduce the UGR value: High-efficiency UGR < 19 and high-output UGR < 22 are achieved. The CG optics are optimized for the WideBeam lights. Mounting aid for CG surface-mounted optics using an add-on clip on the end caps of the LED lights. Dimensions: 1000 x 84 x 2 mm Weight: 0.7 kg
Lieske Part No.: 688134

Anbauoptik CG aus Aluminium pulverbeschichtet in weiß bestehend aus zwei Reflektorflügeln zur Reduktion des UGR Wertes: High-Efficiency UGR < 19 und High-Output UGR < 22 wird damit erreicht. Die CG-Optik ist für die WideBeam Leuchten optimiert. Montagehilfe für Anbauoptik CG mittels Add-on Clip an den Endkappen der LED Leucht. Abmessungen: 1498 x 84 x 2 mm Gewicht: 1 kg
Lieske Part No.: 889626

CG surface-mounted optics made of white powder-coated aluminum, consisting of two reflector wings to reduce the UGR value: High-efficiency UGR < 19 and high-output UGR < 22 are achieved. The CG optics are optimized for WideBeam lights. Mounting aid for CG surface-mounted optics using an add-on clip on the end caps of the LED lights. Dimensions: 1996 x 84 x 2 mm Weight: 1.3 kg
Lieske Part No.: 688149

End cap set made of plastic in white. End cap set is not included in the scope of delivery of the TECON C LED WW Wallwasher. Weight: 0.1 kg
Lieske Part No.: 688160

Black electrical feed made of profiled sheet steel for the electrical connection of the light strip. Plug-in connection terminals for 5 power cables, 2 x 2 emergency lighting cables and 2 control cables. Contact protection for current conducting profile and end caps included. Dimensions: 344 x 63 x 56 mm, weight: 0.68 kg
Lieske Part No.: 1104935

Support rail made of profiled sheet steel in black. 11 conductors embedded in an integrated current conducting profile. 5 power cables (5 x 2.5mm²/16A) and 2 x 2 conductors (4 x 1.5mm²/10A) for the integration of emergency lighting using two independently separated circuits and 2 conductors (2 x 1.5mm²/10A) as a control cable. Tool-free connection via electrical feed-in set. Dimensions: 4001 x 69 x 60 mm, weight: 6.9 kg
Lieske Part No.: 1104936

2 pcs. end caps made of aluminum, black powder-coated including fastening screws.
Lieske Part No.: 1104937

Bar for LED light line, color rendering Ra > 80, color temperature 4000 K. Luminaire wired halogen-free. Dimensions: 1993 x 38 x 51 mm Weight: 2.4 kg. SLOIN slim consists of a channel, LED bar, cover and accessories, which must be configured and ordered separately. This product is part of the overall configuration.
Lieske Part No.: 627859

Ceiling-mounted luminaire with frameless aesthetics, 100% uniform illumination, laser-welded MPO+ micropyramid optics with light accent. Luminaire power: 59.7 W, DALI controllable luminaire with LED converter, LED service life 100,000 h until luminous flux drops to 95% of the initial value. Color tolerance (initial MacAdam): 3. Luminaire luminous flux: 5005 lm, luminaire luminous efficacy: 84 lm/W. Color rendering Ra > 90, color temperature (tunable) 2700-6500 K. LEDs coupled on both sides, light control based on highly efficient LitePrint(R) light guide technology in combination with multi-layer MPO+ micropyramid optics with seamless appearance and defined light coupling for glare-free light distribution with UGR < 19 and L65 < 3000 cd/m² in accordance with EN 12464, reduced luminance at steep angles to reduce glare from steeply inclined displays and for maximum flexibility, homogeneous resolution of the LED light points, laser-welded light chamber ensures contact protection and prevents the ingress of insects and dirt particles, easy to clean thanks to smooth outer cover made of high-purity polymethyl methacrylate, high-quality luminaire housing made of sheet steel, powder-coated with all-round optics frame without seam or joint in white, internal 5-pin screwless connection terminal, installation as a single luminaire or in cluster, lamp wired halogen-free, dimensions: 603 x 603 x 51 mm, weight: 9 kg.
Lieske Part No.: 2092702

Spare part for the SLOTLIGHT I LED Replacement product family. Profile 2262 (2x1/28)W made of acrylic glass (PMMA), satin partially transparent, diffuser pearl material. Dimensions: 2262 mm x 64 mm x 23 mm. Weight: 0.54 kg
Lieske Part No.: 996605

Ersatzteil für Produktfamilie SLOTLIGHT I LED Replacement. Profil 3356 (3x1/28)W aus Acrylglas (PMMA), satin teiltransparent, Diffuserperlmaterial. Abmessungen: 3356 mm x 64 mm x 23 mm. Gewicht: 0,8 kg
Lieske Part No.: 983624

Einbauprofil 'trimless' zum deckenbündigen Einbau in Decken, als Anputzprofil, Länge: 4000mm, zum Anschluss von Profilen, Verbindern und elektrischer Einspeisung, Niedervolt-Stromschiene (48V) dient zur Aufnahme von SUPERSYSTEM II Strahlern und Lichteinsätzen mit Niedervolt-Adapter (48V), werkzeuglose Befestigung der Strahler und Lichteinsätze, Strahler und Lichteinsätze (dimmbar Dali only) sind über das Powerline Signal in der Niedervolt-Stromschiene einzeln adressier-/ steuerbar, Tragprofil aus Aluminiumstrangpressprofil schwarz, pulverbeschichtet, stirnseitige elektische Einspeisung bzw. Abdeckplatten separat zu bestellen, Abmessungen: 4000x64x31 mm, Gewicht: 2,8 kg Hinweis: Für bauseitigen Zuschnitt auf die gewünschte Länge, Set zur Pendelmontage bitte separat bestellen, auf Anfrage kann optional die Stromschienen-Öffnung durch ein Abdeckprofil geschlossen werden!
Lieske Part No.: 890253

Wall mounting bracket for fixing Zumtobel spotlights in horizontally or vertically mounted Zumtobel power tracks, material: made of die-cast aluminum, white, note: can only be used in Zumtobel 3-phase power tracks in combination with Zumtobel 3CU/3CD adapters, cannot be used with spotlights with ADAPTER-TRACKBOX
Lieske Part No.: 966894

Wall mounting bracket for fixing Zumtobel spotlights in horizontally or vertically mounted Zumtobel power tracks, material: made of die-cast aluminum, black, Note: Can only be used in Zumtobel 3-phase power tracks in combination with Zumtobel 3CU/3CD adapters, cannot be used with spotlights with ADAPTER-TRACKBOX
Lieske Part No.: 966896

Planar ring for PANOS infinity DA (R) 68 mm, for flush-mounted installation of PANOS infinity recessed luminaires (flush-mounted/trimless version), made of aluminium, painted white, perforated with plastering edge, dimensions: diameter 82 x 41 mm
Lieske Part No.: 381360

Frame to adapt VOYAGER One surface-mounted luminaire to recessed version. Frame assembly is tool-free.
Lieske Part No.: 2091239

Surface-mounted housing for 622 x 622 mm Omega Pro 2 luminaire. Housing: steel, painted Dimensions: 637 x 640 x 75 mm Weight: 2.43 kg
Lieske Part No.: 2091977

Installation frame for a 622 x 622mm Omega Pro 2 light in a plasterboard ceiling with a thickness of 12-50 mm. The installation frame is made of spot-welded sheet steel and is supplied with 4 height-adjustable leveling elements. The frame is powder-coated white, similar to RAL 9016. In order to properly insert the light into the mounting frame (including CKIT / CKIT+), there must be a clear space of 200 mm in the ceiling, and the distance to the wall should be at least 150 mm. Dimensions: 655 x 655 x 91 mm Ceiling cutout: 640 x 640mm. Weight: 1.97 kg
Lieske Part No.: 2091975

Mounting frame for flush mounting
Lieske Part No.: 2092713

Rope mounting set for ceiling mounting
Lieske Part No.: 2092714

Threaded rod, white, threaded rod M4, length
mm, laminated with plastic pipe, cut for height adjustment on site, fine adjustment by turning the threaded rod with a canopy to conceal the mechanical fasteners, maximum tensile load: 2 kg Type: S25 539 Quantity:
ST.
Lieske Part No.: 754179

Threaded rod, black, M4 threaded rod, length 1000 mm, laminated with plastic tube for height adjustment cut on site, fine adjustment by turning the threaded rod with a canopy to conceal the mechanical fasteners, maximum tensile load: 20 kg Type: S2505400


Quantity: 1 unit.
Lieske Part No.: 183445

3-phase connector, black, on the distance without mechanical connection of two power rails, Dimensions: 84x84x27 mm Type: S28 339 Quantity:
ST.
Lieske Part No.: 502218