Through-wiring made of heat-resistant individual cables. For use in combination with lamp D1/H1 and lamp D1/H1 with coupling (ZLK SAN) D/H1 or D/H2 and lamp D1/H1 with dummy module D/H (BL) L60 or L75. 3-core version, Ø 1.5 mm2. Packaging unit 1 set. Accessories available for 10 years after the invoice date subject to reasonable changes in the interest of progress.
Lieske Part No.: 1053491

Through-wiring made of heat-resistant individual cables. For use in combination with lamp D2/H2 and lamp D2/H2 as well as lamp D2/H2 with coupling (ZLK SAN) D/H1 or D/H2 and lamp D2/H2 with dummy module D/H (BL) L60 or L75 or L150 as well as in combination with lamp D1/H1 with dummy module D/H (BL) L150. For use in combination with lamp D1/H1 and lamp D2/H2. With this combination, the through-wiring must be cut to length. 3-core version, Ø 1.5 mm2. Packaging unit 1 set. Accessories available for 10 years after the invoice date subject to reasonable changes in the interest of progress.
Lieske Part No.: 1053492

End cap made of thermoplastically fused ASA / TPE with a high-quality, matt surface structure and surface quality in accordance with VDI30. For protection class-compliant power supply (IP66), the end cap is equipped with 3 self-sealing membranes for cable cross-sections 7 mm - 13 mm and 3 pre-stamped power supply points for PG screw connections (M20 / M25). For replacement or exchange. Packaging unit 2 pieces. Color light gray. Module length 75 mm. Accessories available 10 years after the invoice date subject to reasonable changes in the interest of progress.
Lieske Part No.: 2037159

Accessories, mounting bracket, mounting accessories for WLS27 line lights, snap bracket for WLS27 line light, material: polycarbonate, 5.3 mm hole for fastening, contains: 2x snap clips
Lieske Part No.: 1920125

Lampholders for compact fluorescent lamps
Lamp holder for T Lamps
Steel zinc plated through hole M4 / M3, 5
Type: T 8 (26 mm)

Type: 100442
Quantity: 1 unit.
Lieske Part No.: 498774

E
4 metal frames rated value 2/25, female Klemmn barrier coat, cover with earth clamp smooth drum with nipple thread M
x
Color: chrome Type:

863 sales unit:
ST.
Lieske Part No.: 924065

E 27 Thermoplasfassungen
Rated 4/250, socket terminals
externally threaded shell, with threaded nipple M 10 x 1
Color: black

Type: 102050
Quantity: 1 unit.
Lieske Part No.: 623556

E 27 metal frames
nominally 4/250, socket terminals jacket lock, ground terminal in the lid
smooth drum with nipple thread M 10 x 1
Color: brass color type: 102803


Quantity: 1 unit.
Lieske Part No.: 161372

Lampholders for compact fluorescent G
3 building frames mounting height 5 mm, push-in terminals, mounting base with slots, 5 locking positions, temperature, concentration camp T version: without starter Capture Type: 6546 Quantity:



ST.
Lieske Part No.: 888259

Lampholders for mains voltage halogen lamps R7s sockets aluminum, M3 screws through holes, temperature concentration camp. T3 Usable cable length 35 mm Type: Line
, Mm ² Type:
9265 sales unit:
ST.
Lieske Part No.: 960579

Coupling for extending pre-assembled connecting cables Type: WU-VB-KP-1-1, Suitable for: other, Type: other, With screw connectors: No
Lieske Part No.: 346807

Lamp holder for TC-F, TC-L lamps Material: stainless steel Insert base for 8.5x10.5mm Weight: 1.5g Type: 93059, Mounting type: Plug-in mounting, Design: Connection element and socket, Nipple thread: without, Material: Steel, Socket: 2G11, Color: other, With starter holder: No
Lieske Part No.: 113343

EasyConnect RGB PCB-PCB connector with cable max. permissible current: 1.5A Number of wires: 4 (wire cross-section: 0.205qmm/AWG24) PVC-free Order no.: 535976, Type: other, Number of conductors: 4, Nominal conductor cross-section branch cable: 0.205qmm
Lieske Part No.: 549493

Strain relief, white For cables: H03VV-F 2X0.5 or H03VV-F 2X0.75m Material: PA Weight: 0.9g Type: 09606, Type of accessory: other Material: plastic Color: white
Lieske Part No.: 310807

Threaded pipe material: brass, bare thread: M10x1 length: 50mm, material: brass, colour: other, screw thread over the full length: yes, length: 50mm, dimension: 1mm
Lieske Part No.: 581786

Threaded pipe material: brass, bare Thread: M10x1 Length: 100mm Material: brass Color: other Dimension: 1mm Length: 100mm Screw thread over the full length: Yes
Lieske Part No.: 864911

Threaded pipe material: brass, bare thread: M8x1 length: 25mm, length: 25mm, dimension: 1mm, material: brass, surface: other, color: other, screw thread over the full length: yes
Lieske Part No.: 812723

Round cables For incandescent and halogen lamps Cotton insulated Designation: H03RT-F Other colors on request Length: 100m Ring sheath material: Textile Nominal voltage U: 300V Nominal conductor cross-section: 0.75qmm Number of cores: 3 Permissible cable external temperature, in motion: 60°C
Lieske Part No.: 498227

Chain suspension for tool-free connection of the support rail using CLIX technology. Height adjustable. Fastening spring made of stainless spring steel V2A. Dimensions: 112 x 56 x 30 mm Weight: 0.08 kg
Lieske Part No.: 632965

Type: 2 9285
8 item:
ST.
Lieske Part No.: 828709

Suction Cup Weight:
kg Type: 2 935455 Quantity:
ST.
Lieske Part No.: 512235

White cap rail cut from plastic. Weight: 0.1kg Type: 22,065,758


Quantity: 1 unit.
Lieske Part No.: 657731

Wall fastener for tool-free connection of trunking using CLIX technology. Mounting spring made of stainless steel V2A.Maximum tensile load 3 kg. Dimensions: 4 x 7 x 5 mm, weight:
kg Type: 22
28
4 item:
ST.
Lieske Part No.: 864242

DIN rail shim made of profiled steel sheet coated with white polyester resin enamel. Simple connection via electrical feed-set. Dimensions:
x 6 x 54 mm, weight:
, 7 kg Type: 22
28 2 Quantity:
ST.
Lieske Part No.: 969876

Rail made of profiled steel sheet coated with white polyester resin enamel.

Conductor embedded in an integrated Stromleitprofil. 5 network cables and 2 x 2 conductors for the integration of emergency based on two separate circuits independently and as a 2 wire control line. Simple connection via electrical feed-set. Dimensions: 25 x 6 x 54 mm, Weight: 4.5 kg Type: 22
28 42 Quantity:
ST.
Lieske Part No.: 970050

Rail made of profiled steel sheet coated with white polyester resin enamel.

Conductor embedded in an integrated Stromleitprofil. 5 network cables and 2 x 2 conductors for the integration of emergency based on two separate circuits independently and as a 2 wire control line. Simple connection via electrical feed-set. Dimensions: 35 x 6 x 54 mm, weight: 6,
kg Type: 22
28 77 Quantity:
ST.
Lieske Part No.: 704508

10 year block battery, type VLRA, sealed, rechargeable 10 year design life at 20° ambient temperature High performance grid plates (lead/calcium) Fleece technology ABS housing and cover Recessed poles with copper core, screwable inside Extremely low gassing, low self-discharge No transport restrictions 100% recyclable Maintenance-free over the entire service life The battery pack must not be stored without a battery charge for longer than 2 months after delivery. The battery pack must be connected to the system after 2 months at the latest. If these instructions are not followed, any liability or warranty claims will be rejected.
Lieske Part No.: 771199

10 year block battery, type VLRA, sealed, rechargeable 10 year design life at 20° ambient temperature High performance grid plates (lead/calcium) Fleece technology ABS housing and cover Recessed poles with copper core, screwable inside Extremely low gassing, low self-discharge No transport restrictions 100% recyclable Maintenance-free over the entire service life The battery pack must not be stored without a battery charge for longer than 2 months after delivery. The battery pack must be connected to the system after 2 months at the latest. If these instructions are not followed, any liability or warranty claims will be rejected.
Lieske Part No.: 570539

10 year block battery, type VLRA, sealed, rechargeable 10 year design life at 20° ambient temperature High performance grid plates (lead/calcium) Fleece technology ABS housing and cover Recessed poles with copper core, screwable inside Extremely low gassing, low self-discharge No transport restrictions 100% recyclable Maintenance-free over the entire service life The battery pack must not be stored without a battery charge for longer than 2 months after delivery. The battery pack must be connected to the system after 2 months at the latest. If these instructions are not followed, any liability or warranty claims will be rejected.
Lieske Part No.: 453464

L-connector white. Dimensions: 135mm x 365mm x 60mm. Weight: 1.62 kg Type: 22,157,274


Quantity: 1 unit.
Lieske Part No.: 328209

T-connector white. Dimensions: 500mm x 365mm x 60mm. Weight: 2.18 kg Type: 22,157,279


Quantity: 1 unit.
Lieske Part No.: 655001

Suspension type: 22
57562 item:
ST.
Lieske Part No.: 925869

Strain relief made of galvanized sheet steel, with integrated device for clamping the feed cables.
Lieske Part No.: 926833

Elliptical canopy with 5 single-pole terminals in white made of plastic polycarbonate (PC) with clamping options.
Lieske Part No.: 377195

Optionaler mechanischer Kanalverbinder (1 Stück)
Lieske Part No.: 365172

CG surface-mounted optics made of white powder-coated aluminum, consisting of two reflector wings to reduce the UGR value: High-efficiency UGR < 19 and high-output UGR < 22 are achieved. The CG optics are optimized for the WideBeam lights. Mounting aid for CG surface-mounted optics using an add-on clip on the end caps of the LED lights. Dimensions: 1000 x 84 x 2 mm Weight: 0.7 kg
Lieske Part No.: 688134

Anbauoptik CG aus Aluminium pulverbeschichtet in weiß bestehend aus zwei Reflektorflügeln zur Reduktion des UGR Wertes: High-Efficiency UGR < 19 und High-Output UGR < 22 wird damit erreicht. Die CG-Optik ist für die WideBeam Leuchten optimiert. Montagehilfe für Anbauoptik CG mittels Add-on Clip an den Endkappen der LED Leucht. Abmessungen: 1498 x 84 x 2 mm Gewicht: 1 kg
Lieske Part No.: 889626

CG surface-mounted optics made of white powder-coated aluminum, consisting of two reflector wings to reduce the UGR value: High-efficiency UGR < 19 and high-output UGR < 22 are achieved. The CG optics are optimized for WideBeam lights. Mounting aid for CG surface-mounted optics using an add-on clip on the end caps of the LED lights. Dimensions: 1996 x 84 x 2 mm Weight: 1.3 kg
Lieske Part No.: 688149

End cap set made of plastic in white. End cap set is not included in the scope of delivery of the TECON C LED WW Wallwasher. Weight: 0.1 kg
Lieske Part No.: 688160

Black electrical feed made of profiled sheet steel for the electrical connection of the light strip. Plug-in connection terminals for 5 power cables, 2 x 2 emergency lighting cables and 2 control cables. Contact protection for current conducting profile and end caps included. Dimensions: 344 x 63 x 56 mm, weight: 0.68 kg
Lieske Part No.: 1104935

Support rail made of profiled sheet steel in black. 11 conductors embedded in an integrated current conducting profile. 5 power cables (5 x 2.5mm²/16A) and 2 x 2 conductors (4 x 1.5mm²/10A) for the integration of emergency lighting using two independently separated circuits and 2 conductors (2 x 1.5mm²/10A) as a control cable. Tool-free connection via electrical feed-in set. Dimensions: 4001 x 69 x 60 mm, weight: 6.9 kg
Lieske Part No.: 1104936

2 pcs. end caps made of aluminum, black powder-coated including fastening screws.
Lieske Part No.: 1104937

Bar for LED light line, color rendering Ra > 80, color temperature 4000 K. Luminaire wired halogen-free. Dimensions: 1993 x 38 x 51 mm Weight: 2.4 kg. SLOIN slim consists of a channel, LED bar, cover and accessories, which must be configured and ordered separately. This product is part of the overall configuration.
Lieske Part No.: 627859

Ceiling-mounted luminaire with frameless aesthetics, 100% uniform illumination, laser-welded MPO+ micropyramid optics with light accent. Luminaire power: 59.7 W, DALI controllable luminaire with LED converter, LED service life 100,000 h until luminous flux drops to 95% of the initial value. Color tolerance (initial MacAdam): 3. Luminaire luminous flux: 5005 lm, luminaire luminous efficacy: 84 lm/W. Color rendering Ra > 90, color temperature (tunable) 2700-6500 K. LEDs coupled on both sides, light control based on highly efficient LitePrint(R) light guide technology in combination with multi-layer MPO+ micropyramid optics with seamless appearance and defined light coupling for glare-free light distribution with UGR < 19 and L65 < 3000 cd/m² in accordance with EN 12464, reduced luminance at steep angles to reduce glare from steeply inclined displays and for maximum flexibility, homogeneous resolution of the LED light points, laser-welded light chamber ensures contact protection and prevents the ingress of insects and dirt particles, easy to clean thanks to smooth outer cover made of high-purity polymethyl methacrylate, high-quality luminaire housing made of sheet steel, powder-coated with all-round optics frame without seam or joint in white, internal 5-pin screwless connection terminal, installation as a single luminaire or in cluster, lamp wired halogen-free, dimensions: 603 x 603 x 51 mm, weight: 9 kg.
Lieske Part No.: 2092702

Spare part for the SLOTLIGHT I LED Replacement product family. Profile 2262 (2x1/28)W made of acrylic glass (PMMA), satin partially transparent, diffuser pearl material. Dimensions: 2262 mm x 64 mm x 23 mm. Weight: 0.54 kg
Lieske Part No.: 996605

Ersatzteil für Produktfamilie SLOTLIGHT I LED Replacement. Profil 3356 (3x1/28)W aus Acrylglas (PMMA), satin teiltransparent, Diffuserperlmaterial. Abmessungen: 3356 mm x 64 mm x 23 mm. Gewicht: 0,8 kg
Lieske Part No.: 983624

Einbauprofil 'trimless' zum deckenbündigen Einbau in Decken, als Anputzprofil, Länge: 4000mm, zum Anschluss von Profilen, Verbindern und elektrischer Einspeisung, Niedervolt-Stromschiene (48V) dient zur Aufnahme von SUPERSYSTEM II Strahlern und Lichteinsätzen mit Niedervolt-Adapter (48V), werkzeuglose Befestigung der Strahler und Lichteinsätze, Strahler und Lichteinsätze (dimmbar Dali only) sind über das Powerline Signal in der Niedervolt-Stromschiene einzeln adressier-/ steuerbar, Tragprofil aus Aluminiumstrangpressprofil schwarz, pulverbeschichtet, stirnseitige elektische Einspeisung bzw. Abdeckplatten separat zu bestellen, Abmessungen: 4000x64x31 mm, Gewicht: 2,8 kg Hinweis: Für bauseitigen Zuschnitt auf die gewünschte Länge, Set zur Pendelmontage bitte separat bestellen, auf Anfrage kann optional die Stromschienen-Öffnung durch ein Abdeckprofil geschlossen werden!
Lieske Part No.: 890253

Wall mounting bracket for fixing Zumtobel spotlights in horizontally or vertically mounted Zumtobel power tracks, material: made of die-cast aluminum, white, note: can only be used in Zumtobel 3-phase power tracks in combination with Zumtobel 3CU/3CD adapters, cannot be used with spotlights with ADAPTER-TRACKBOX
Lieske Part No.: 966894

Wall mounting bracket for fixing Zumtobel spotlights in horizontally or vertically mounted Zumtobel power tracks, material: made of die-cast aluminum, black, Note: Can only be used in Zumtobel 3-phase power tracks in combination with Zumtobel 3CU/3CD adapters, cannot be used with spotlights with ADAPTER-TRACKBOX
Lieske Part No.: 966896

Planar ring for PANOS infinity DA (R) 68 mm, for flush-mounted installation of PANOS infinity recessed luminaires (flush-mounted/trimless version), made of aluminium, painted white, perforated with plastering edge, dimensions: diameter 82 x 41 mm
Lieske Part No.: 381360