Counterweight for luminaire type ... ETDD. Accessories available for 10 years after the invoice date, subject to reasonable modifications in the interests of progress.
Lieske Part No.: 430433

Luminaire 10 years, spare parts (LED module, control gear, optical system) available 15 years after invoice date subject to reasonable changes in the interests of progress.
Lieske Part No.: 903437

Replacement seal. For LED recessed floor spotlight Lutera 100.
Lieske Part No.: 967458

Stainless steel end plate, square. For LED recessed floor spotlight Lutera 100.
Lieske Part No.: 153100

Cover glass, anti-slip. For LED recessed floor spotlight Lutera 100.
Lieske Part No.: 967947

Floor-mounted pot made of weather-resistant PVC pipe. For luminaire type Lutera 200.
Lieske Part No.: 153138

Stainless steel end plate, round.
Lieske Part No.: 153139

Mounting plate for reinforcing ceiling panels with a system size of 625 mm. Design C2 for downlights Ø 226 mm. Also suitable for installing downlights in closed ceilings with a low load-bearing capacity. Made of sheet steel, Sendzimir galvanized.
Lieske Part No.: 769266

Feed accessories for Atirion rope suspension... 1 set.
Lieske Part No.: 790490

Link chain, 20 m. For ball-proof, hanging installation of the lights. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 371762

Ball roll-off bracket for Actison LED (265 mm) / Actison Fit (310 mm) lights. Installation only in conjunction with support rail 110N··· and mounting bracket Actison TS1. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interest of progress.
Lieske Part No.: 993881

Heat-resistant through-wiring for Actison strip lights. Heat resistance up to 105 °C. Consists of 7 individual conductors 1.5mm2. The light is equipped with a 5-pin connection terminal for through-wiring. The scope of delivery includes corresponding terminals for additional wires. With PG grommet. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interest of progress.
Lieske Part No.: 209416

Installation frame for Fidesca-SD 625...414/24 W, FidescaSD G3. System dimensions 625 x 625 (M84). Length 623 mm, width 45 mm, height 44 mm. Accessories available for 10 years after the invoice date subject to reasonable changes in the interests of progress.
Lieske Part No.: 160009

Installation housing for round surface-mounted luminaires PolaronIQ WD1/WD1D. For flush-mounting the luminaire in walls and ceilings. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 846343

Installation housing for round surface-mounted luminaires PolaronIQ WD2/WD2D, WD1-2/ WD1-2D. For flush-mounting the luminaire in walls and ceilings. For use in combination with concrete casting box Polaron IQ WD2 BE. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 846590

Semi-recessed housing for Polaron IQ WD2/WD2D, WD1-2/WD1-2D. Packaging unit consisting of 1 piece. Accessories available for 10 years after the invoice date subject to reasonable changes in the interest of progress.
Lieske Part No.: 846540

Semi-recessed housing for Polaron IQ WD2/WD2D, WD1-2/WD1-2D. With reinforced support plate, system dimensions 600 x 600 (M73). For downlight installation in closed ceilings with low load-bearing capacity. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 846564

Semi-recessed housing for Polaron IQ WD2/WD2D, WD1-2/WD1-2D. With reinforced support plate, system dimensions 625 x 625 (M84). For downlight installation in closed ceilings with low load-bearing capacity. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 846578

Installation housing for round surface-mounted luminaires PolaronIQ WD2/WD2D. With reinforced support plate, system dimensions 600 x 600 (M73). For downlight installation in closed ceilings with low load-bearing capacity. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 846719

Installation housing for round surface-mounted luminaires PolaronIQ WD2/WD2D. With reinforced support plate, system dimensions 600 x 600 (M73). For downlight installation in closed ceilings with low load-bearing capacity. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 846738

In-ground pot made of weather-resistant PVC pipe. For LED in-ground spotlight Lutera 100.
Lieske Part No.: 590417

Concrete casting housing for the installation of downlights including ballast box in concrete ceilings. For luminaire type Inplana C09... . Accessories available for 10 years after the invoice date subject to reasonable changes in the interests of progress.
Lieske Part No.: 147867

3-point cable suspension with transparent power cable and white ceiling connection box. With 3-pole connection cable 3 x 0.75 mm2. For suspension lengths up to 2000 mm. Accessories for Onplana D07... . Accessories available for 10 years after the invoice date subject to reasonable changes in the interest of progress.
Lieske Part No.: 214790

Mast attachment made of welded, hot-dip galvanized steel tube for mounting 2 side-mounted lights. For masts with mast top Ø 76 mm. Supporting piece Ø 60 x 200 mm, angle of inclination 5°. With plastic cover similar to RAL 7032, pebble gray. Fastened to the mast using 2 x 3 mounted hexagon socket screws M 8x12 (SW 4 mm) made of stainless steel. For the Cuvia, Lumega IQ, Lumega series, an additional reducer 0970/60 is required for each light.
Lieske Part No.: 643188

Ceiling mounting accessories, 2-part. For LED high bay spotlights Mirona Fit 2L/4L/8L. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 176921

Head pieces made of PMMA. For LED surface-mounted and suspended luminaires Solvan Flow D/H. For individual luminaires and light strip ends. Color white. Delivery includes 2 pieces. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 450158

Through-wiring made of heat-resistant individual cables. For use in combination with lamp D1/H1 and lamp D1/H1 with coupling (ZLK SAN) D/H1 or D/H2 and lamp D1/H1 with dummy module D/H (BL) L60 or L75. 3-core version, Ø 1.5 mm2. Packaging unit 1 set. Accessories available for 10 years after the invoice date subject to reasonable changes in the interest of progress.
Lieske Part No.: 1053491

Through-wiring made of heat-resistant individual cables. For use in combination with lamp D2/H2 and lamp D2/H2 as well as lamp D2/H2 with coupling (ZLK SAN) D/H1 or D/H2 and lamp D2/H2 with dummy module D/H (BL) L60 or L75 or L150 as well as in combination with lamp D1/H1 with dummy module D/H (BL) L150. For use in combination with lamp D1/H1 and lamp D2/H2. With this combination, the through-wiring must be cut to length. 3-core version, Ø 1.5 mm2. Packaging unit 1 set. Accessories available for 10 years after the invoice date subject to reasonable changes in the interest of progress.
Lieske Part No.: 1053492

End cap made of thermoplastically fused ASA / TPE with a high-quality, matt surface structure and surface quality in accordance with VDI30. For protection class-compliant power supply (IP66), the end cap is equipped with 3 self-sealing membranes for cable cross-sections 7 mm - 13 mm and 3 pre-stamped power supply points for PG screw connections (M20 / M25). For replacement or exchange. Packaging unit 2 pieces. Color light gray. Module length 75 mm. Accessories available 10 years after the invoice date subject to reasonable changes in the interest of progress.
Lieske Part No.: 2037159

Accessories, mounting bracket, mounting accessories for WLS27 line lights, snap bracket for WLS27 line light, material: polycarbonate, 5.3 mm hole for fastening, contains: 2x snap clips
Lieske Part No.: 1920125

Lampholders for compact fluorescent lamps
Lamp holder for T Lamps
Steel zinc plated through hole M4 / M3, 5
Type: T 8 (26 mm)

Type: 100442
Quantity: 1 unit.
Lieske Part No.: 498774

E
4 metal frames rated value 2/25, female Klemmn barrier coat, cover with earth clamp smooth drum with nipple thread M
x
Color: chrome Type:

863 sales unit:
ST.
Lieske Part No.: 924065

E 27 Thermoplasfassungen
Rated 4/250, socket terminals
externally threaded shell, with threaded nipple M 10 x 1
Color: black

Type: 102050
Quantity: 1 unit.
Lieske Part No.: 623556

E 27 metal frames
nominally 4/250, socket terminals jacket lock, ground terminal in the lid
smooth drum with nipple thread M 10 x 1
Color: brass color type: 102803


Quantity: 1 unit.
Lieske Part No.: 161372

Lampholders for compact fluorescent G
3 building frames mounting height 5 mm, push-in terminals, mounting base with slots, 5 locking positions, temperature, concentration camp T version: without starter Capture Type: 6546 Quantity:



ST.
Lieske Part No.: 888259

Lampholders for mains voltage halogen lamps R7s sockets aluminum, M3 screws through holes, temperature concentration camp. T3 Usable cable length 35 mm Type: Line
, Mm ² Type:
9265 sales unit:
ST.
Lieske Part No.: 960579

Coupling for extending pre-assembled connecting cables Type: WU-VB-KP-1-1, Suitable for: other, Type: other, With screw connectors: No
Lieske Part No.: 346807

Lamp holder for TC-F, TC-L lamps Material: stainless steel Insert base for 8.5x10.5mm Weight: 1.5g Type: 93059, Mounting type: Plug-in mounting, Design: Connection element and socket, Nipple thread: without, Material: Steel, Socket: 2G11, Color: other, With starter holder: No
Lieske Part No.: 113343

EasyConnect RGB PCB-PCB connector with cable max. permissible current: 1.5A Number of wires: 4 (wire cross-section: 0.205qmm/AWG24) PVC-free Order no.: 535976, Type: other, Number of conductors: 4, Nominal conductor cross-section branch cable: 0.205qmm
Lieske Part No.: 549493

Strain relief, white For cables: H03VV-F 2X0.5 or H03VV-F 2X0.75m Material: PA Weight: 0.9g Type: 09606, Type of accessory: other Material: plastic Color: white
Lieske Part No.: 310807

Threaded pipe material: brass, bare thread: M10x1 length: 50mm, material: brass, colour: other, screw thread over the full length: yes, length: 50mm, dimension: 1mm
Lieske Part No.: 581786

Threaded pipe material: brass, bare Thread: M10x1 Length: 100mm Material: brass Color: other Dimension: 1mm Length: 100mm Screw thread over the full length: Yes
Lieske Part No.: 864911

Threaded pipe material: brass, bare thread: M8x1 length: 25mm, length: 25mm, dimension: 1mm, material: brass, surface: other, color: other, screw thread over the full length: yes
Lieske Part No.: 812723

Round cables For incandescent and halogen lamps Cotton insulated Designation: H03RT-F Other colors on request Length: 100m Ring sheath material: Textile Nominal voltage U: 300V Nominal conductor cross-section: 0.75qmm Number of cores: 3 Permissible cable external temperature, in motion: 60°C
Lieske Part No.: 498227

Chain suspension for tool-free connection of the support rail using CLIX technology. Height adjustable. Fastening spring made of stainless spring steel V2A. Dimensions: 112 x 56 x 30 mm Weight: 0.08 kg
Lieske Part No.: 632965

Type: 2 9285
8 item:
ST.
Lieske Part No.: 828709

Suction Cup Weight:
kg Type: 2 935455 Quantity:
ST.
Lieske Part No.: 512235

White cap rail cut from plastic. Weight: 0.1kg Type: 22,065,758


Quantity: 1 unit.
Lieske Part No.: 657731

Wall fastener for tool-free connection of trunking using CLIX technology. Mounting spring made of stainless steel V2A.Maximum tensile load 3 kg. Dimensions: 4 x 7 x 5 mm, weight:
kg Type: 22
28
4 item:
ST.
Lieske Part No.: 864242

DIN rail shim made of profiled steel sheet coated with white polyester resin enamel. Simple connection via electrical feed-set. Dimensions:
x 6 x 54 mm, weight:
, 7 kg Type: 22
28 2 Quantity:
ST.
Lieske Part No.: 969876