BEGA connection column 71230, stationary. Without installation inserts for a maximum of 4 inserts. Cast aluminum, aluminum and stainless steel coating technology BEGA Unidure®, color graphite. 3 cable entries for through-wiring of the mains connection cable max. ø 17 mm. With mounting plate for screwing onto a foundation or onto the anchor unit 70895. Dimensions: 75 x 500 x 155 mm.
Lieske Part No.: 675385

BEGA screw-on base 71243, made of hot-dip galvanized steel, in accordance with EN ISO 1461 for screwing onto a foundation. Powder-coated, color graphite. 4 mounting holes, width 13.5 mm.
Lieske Part No.: 670915

BEGA connection column 71253, stationary. Built-in components: 2 earthed sockets 16 A, 250 volts. Protection class IP 44. Cast aluminum, aluminum and stainless steel coating technology BEGA Unidure®, color graphite. 3 cable entries for through-wiring of the mains connection cable max. ø 17 mm. With mounting plate for screwing onto a foundation or onto the anchor unit 70895. Dimensions: 105 x 550 x 165 mm.
Lieske Part No.: 675386

BEGA connection column 71254, stationary. Built-in components: 1 earthed socket 16 A, 250 volts. Plug type F: system commonly used in Germany and Europe. 1 universal on/off switch 1-pole 10 A, 250 V ?. Protection class IP 44. Cast aluminum, aluminum and stainless steel coating technology BEGA Unidure®, color graphite. 3 cable entries for through-wiring the mains connection cable max. ø 17 mm. With mounting plate for screwing onto a foundation or onto the anchor unit 70895. Dimensions: 105 x 550 x 165 mm.
Lieske Part No.: 675387

BEGA connection column 71255, stationary. Without installation inserts for a maximum of 2 inserts. Cast aluminum, aluminum and stainless steel coating technology BEGA Unidure®, color graphite. 3 cable entries for through-wiring of the mains connection cable max. ø 17 mm. With mounting plate for screwing onto a foundation or onto the anchor unit 70895. Dimensions: 105 x 550 x 165 mm.
Lieske Part No.: 675389

BEGA blind cover 71257 for connection columns without installation inserts. The blind cover is used to properly close unused installation openings on the connection columns 71 230 and 71 255.
Lieske Part No.: 675492

BEGA BugSaver® control unit in device box 71304. Ready-to-connect unit for installation, e.g. in light masts, bollard lights and suspended ceilings, as well as for all types of installation outside of lights or groups of lights. Control unit for BEGA BugSaver® top-mounted lights for switching the colour temperature from 3000 K to 1800 K to protect nocturnal insects. Power can also be reduced. Switching is carried out either by a switched control phase or by virtual midnight calculation. Integrated DALI power supply for up to 9 DALI operating devices (2 mA each).
Lieske Part No.: 675480

BEGA BugSaver control unit in connection box 71305 for installation in light masts. Control unit for BEGA BugSaver luminaires for switching the colour temperature from 3000 K to 1800 K to protect nocturnal insects. Power can also be reduced. Switching is carried out either by a switched control phase or by virtual midnight calculation. Integrated DALI power supply for up to 9 DALI operating devices (2 mA each).
Lieske Part No.: 675379

Insert pictogram arrow right according to ISO 7010 for luminaire type Atlantic LED S. Version: Insert sheet/plate Meaning of the pictogram: Escape route Double-sided: No
Lieske Part No.: 1335643

Rope suspension for Exit Cube 33x22 LED luminaire. 4 ceiling mounting sleeves and ropes. Suspension height continuously adjustable (max. 1.5m). Type of accessory: Rope suspension Color: Silver Material: Steel
Lieske Part No.: 672248

Accessory for luminaire type Style CG-S. Quick mounting kit with clamps and optional spacers. Type of accessory: mounting kit Color: gray Material: plastic
Lieske Part No.: 1991314

Symmetrical optics and glare protection for FlexiTech SE
Lieske Part No.: 1910179

Rope suspension set for CrystalWay lights 20m or 30m version
Lieske Part No.: 1425823

CrystalWay installation frame simple, for ceiling installation, 30m
Lieske Part No.: 1770677

CrystalWay mounting frame with cover, for ceiling installation, 20m
Lieske Part No.: 1425824

CrystalWay mounting frame with cover, for ceiling installation, 30m
Lieske Part No.: 1770646

A07VV-F 3x0.75 qmm suspension cable Transparent
ELECTRICAL DATA AT +20°C
Conductor resistance: 28 Ohm/km
Insulation resistance: > 500 MOhm*km
Capacity: nom 65 nF/km
Test voltage: 3kV DC
Temperature range: -20 / + 80°C
Voltage range: 600 Volt
Outside diameter: approx. 5.8 mm
Lieske Part No.: 100733

Transparent connection cable Type: 5 x 75 mm round,
meter type: LINE A 7VV F-TRAN item:
MTR
Lieske Part No.: 972682

Sales unit: 30 meters
Lieske Part No.: 415205

Lieske Part No.: 651743

Type: 79548.000
Sales unit: 1 pc
Lieske Part No.: 445487

Black pendulum tube: metal, powder-coated. D13mm, L 1040mm. Canopy: plastic. D64mm, H 73mm. Load 20kg.
Lieske Part No.: 752086

Sales unit: 1 ST.
Lieske Part No.: 1054597

Sales unit: 1 ST.
Lieske Part No.: 1599041

Wire rope: D1.50mm, L 2500mm. Fastening sleeve: metal. Canopy: plastic, white. D105mm, H 43mm. Cable entry for 5x1.5mmq sheathed cable or spiral cable. Strain relief. Connection terminal. Load 20kg.
Lieske Part No.: 507330

Sales unit: 1 ST.
Lieske Part No.: 1925671

Sales unit: 1 ST.
Lieske Part No.: 1925672

Sales unit: 1 ST.
Lieske Part No.: 1925673

Sales unit: 1 ST.
Lieske Part No.: 1925674

for cable diameters 8-23mm. Plastic shells, 2-component PUR casting resin. L 150mm, W 70mm, H 46mm.
Lieske Part No.: 858563

Metal, hot-dip galvanized. Cable entry. Weight 1.75kg
Lieske Part No.: 483783

Mounting plate with threaded rods and fastening screws. Assembly of the individual parts must be carried out on site. Weight 0.76kg
Lieske Part No.: 804437

Corrosion-resistant cast aluminum, no-rinse surface treated. Graphite powder coated twice. Weight 1.70kg
Lieske Part No.: 648264

with 4 cable entries 7-25mm. Plastic. D102mm, L 305mm. IP68 3m Weight 0.47kg
Lieske Part No.: 980593

for fastening busbars in the plaster profile.
Lieske Part No.: 316806

Black for suspension on power rail. Metal.
Lieske Part No.: 100464

White plastic. Protective conductor right. ENEC10, VDE
Lieske Part No.: 344457

White plastic. Through-wiring. Feed-in possible. ENEC10, VDE
Lieske Part No.: 536136

Black plastic. Feed-in possible. Through-wiring. ENEC10, VDE
Lieske Part No.: 508581

Metal, galvanized. The suspension can be subsequently inserted into the ERCO track from above. Load 15kg. L 30mm, H 47mm.
Lieske Part No.: 680963

Spring steel, galvanized. Load 20kg. L 33mm. Distance from ceiling 14mm.
Lieske Part No.: 955330

With two screws. Aluminum, anodized. Load 30kg. L 50mm, H 26mm.
Lieske Part No.: 706194

for connecting plaster profiles.
Lieske Part No.: 544847

Plastic/steel. Load 10kg. L 67mm.
Lieske Part No.: 593128

with M4 threaded pin and two nuts. Plastic/steel. Load 10kg. L 55mm.
Lieske Part No.: 827708

for M5 screws, with retaining spring. Cast aluminum. Load 10kg.
Lieske Part No.: 399856

White for suspension on feed. Metal.
Lieske Part No.: 252619

White for hanging on corner connector. Metal.
Lieske Part No.: 526911

White for suspension on T-connector. Metal.
Lieske Part No.: 632441

Metal, white. For concealing ceiling cutouts that are too large. When ordering, please state inner and outer diameters.
Lieske Part No.: 754660