Mounting accessories for chain suspension (1 point) CRAFT II plus in size L. Delivery consists of rail, chain and screws for fastening. Rail is attached to the ceiling with a screw and offers two fastening points for the chain suspension. The light can be suspended from the ceiling up to a maximum of 1.59 m. The minimum distance to the ceiling is 0.25 m.
Lieske Part No.: 2092749

Mounting set in white for CLARIS evolution L3080 lights. Complete set for single light and the first light for light strip mounting. Consists of 1 ceiling canopy in white, 2 ceiling fastening elements, 3 suspension cables in length for L3080 cable length 1200 mm in white, 1 strain relief, 4 connection terminals, 1 transparent connection cable, 5x1.5mm2 (not halogen-free).
Lieske Part No.: 2092480

Mounting set in white for CLARIS evolution L3080 lights. Complete set for single light and the first light for light strip mounting. Consists of 1 ceiling canopy in white, 2 ceiling fastening elements, 3 suspension cables in length for L3080 cable length 3100 mm in white, 1 strain relief, 4 connection terminals, 1 transparent connection cable, 5x1.5mm2 (not halogen-free).
Lieske Part No.: 2092481

Mounting set in white for LINARIA LED lights. Complete set for single light and the first light for strip light mounting. Consists of 1 ceiling canopy in white, 2 ceiling fastening elements, 2 suspension cables with a length of 1000 mm, 4 connection terminals.
Lieske Part No.: 2092768

Mounting accessories for chain suspension of the CRAFT II performance. Delivery includes a chain for mounting. With this accessory, the light can be suspended from the ceiling up to a maximum of 1.58 m. In combination with this accessory, the CRAFT II performance is certified for use in sports (BWS ball throwing safety certificate)
Lieske Part No.: 2093030

Mounting bracket for wall and ceiling mounting, 2-part and angle-adjustable for mounting on walls and ceilings, angle range adjustable in 15° increments (note installation instructions for ambient temperature range and angle range). Certified ball-proof (only for ceiling mounting) in combination with CRAFT II plus.
Lieske Part No.: 2093099

Mounting bracket for wall and ceiling mounting, 2-part and angle adjustable for mounting on walls and ceilings, angle range adjustable in 15° increments (note installation instructions for ambient temperature range and angle range).
Lieske Part No.: 2093031

The direct ceiling bracket is a mounting option that allows the light to be mounted very quickly and very close to the ceiling using an innovative snap-in mechanism. Certified ball-proof for ceiling mounting in combination with CRAFT II plus.
Lieske Part No.: 2093100

Canopy set consisting of 1 piece ceiling rosette round white, 5 pieces electrical connectors, 1 piece ceiling fastening element in white, 2 pieces suspension ropes in length 3 m, 1 piece washer
Lieske Part No.: 1920415

1 piece round ceiling rosette for installation in white, 5 pieces electrical connectors. Can be combined with other suspension accessories.
Lieske Part No.: 2093091

Fastening set for light strip installation (butt-to-butt installation). Set includes: 1 connector, 1 profile for surface/pendant mounting in white. Suspension accessories must be ordered separately. Number of lights n-1 set required per light strip.
Lieske Part No.: 2062574

Package: white control unit, bus supply, flexible and cost-effective scene and color temperature lighting control, for controlling up to 64 DALI-compatible operating devices that can change their color temperature. Control unit: with circularly aligned buttons for calling up three lighting scenarios. Central, illuminated come/go button and two rocker switches, one for the brightness and the other for the color temperature. Housing and buttons are made of white plastic, satin finish, dimensions: 87 x 87 x 13 mm. Easy installation in on-site single socket. Supply via DALI control line (no mains connection), current consumption 6mA (3 DALI loads). Power supply: for up to 64 participants or 100 DALI loads (max. 200mA). Short-circuit and voltage-proof against 230/240V external voltage. Made of flame-retardant polycarbonate, halogen-free. Installation in cable ducts or ceiling recess, permissible ambient temperature: 0°C to +50°C. Protection class IP20, dimensions: 101.5 x 29.5mm.
Lieske Part No.: 615293

Package: Silver control unit, bus supply, flexible and cost-effective scene and color temperature light control, for controlling up to 64 DALI-compatible control units that can change their color temperature. Control unit: with circularly aligned buttons for calling up three lighting scenarios. Central, illuminated come/go button and two rocker switches, one for brightness and the other for color temperature. Housing and buttons are made of silver plastic, satin finish, dimensions: 87 x 87 x 13 mm. Easy installation in on-site single socket. Supply via DALI control line (no mains connection), current consumption 6mA (3 DALI loads). Power supply: for up to 64 participants or 100 DALI loads (max. 200mA). Short-circuit and voltage-proof against 230/240V external voltage. Made of flame-retardant polycarbonate, halogen-free. Installation in cable ducts or ceiling recess, permissible ambient temperature: 0°C to +50°C. Protection class IP20, dimensions: 101.5 x 29.5mm.
Lieske Part No.: 480124

Decorative cover for closing a mast opening when no SUPERSYSTEM outdoor accent light is inserted into a mounting opening in the system column. Installation: mast mounting in system column (height 4.5m and 6m), made of steel, micro-structure paint in charcoal, matt. Dimensions: 430 mm x 44 mm x 4 mm. Weight: 0.5 kg.
Lieske Part No.: 2096294

Bar for LED light line, color rendering Ra > 80, color temperature 4000 K. Luminaire wired halogen-free. Dimensions: 1993 x 38 x 51 mm Weight: 2.4 kg. SLOIN slim consists of a channel, LED bar, cover and accessories, which must be configured and ordered separately. This product is part of the overall configuration.
Lieske Part No.: 627859

Ceiling-mounted luminaire with frameless aesthetics, 100% uniform illumination, laser-welded MPO+ micropyramid optics with light accent. Luminaire power: 59.7 W, DALI controllable luminaire with LED converter, LED service life 100,000 h until luminous flux drops to 95% of the initial value. Color tolerance (initial MacAdam): 3. Luminaire luminous flux: 5005 lm, luminaire luminous efficacy: 84 lm/W. Color rendering Ra > 90, color temperature (tunable) 2700-6500 K. LEDs coupled on both sides, light control based on highly efficient LitePrint(R) light guide technology in combination with multi-layer MPO+ micropyramid optics with seamless appearance and defined light coupling for glare-free light distribution with UGR < 19 and L65 < 3000 cd/m² in accordance with EN 12464, reduced luminance at steep angles to reduce glare from steeply inclined displays and for maximum flexibility, homogeneous resolution of the LED light points, laser-welded light chamber ensures contact protection and prevents the ingress of insects and dirt particles, easy to clean thanks to smooth outer cover made of high-purity polymethyl methacrylate, high-quality luminaire housing made of sheet steel, powder-coated with all-round optics frame without seam or joint in white, internal 5-pin screwless connection terminal, installation as a single luminaire or in cluster, lamp wired halogen-free, dimensions: 603 x 603 x 51 mm, weight: 9 kg.
Lieske Part No.: 2092702

Spare part for the SLOTLIGHT I LED Replacement product family. Profile 2262 (2x1/28)W made of acrylic glass (PMMA), satin partially transparent, diffuser pearl material. Dimensions: 2262 mm x 64 mm x 23 mm. Weight: 0.54 kg
Lieske Part No.: 996605

Ersatzteil für Produktfamilie SLOTLIGHT I LED Replacement. Profil 3356 (3x1/28)W aus Acrylglas (PMMA), satin teiltransparent, Diffuserperlmaterial. Abmessungen: 3356 mm x 64 mm x 23 mm. Gewicht: 0,8 kg
Lieske Part No.: 983624

Mounting housing
Lieske Part No.: 875552

External mast adapter, diameter 76mm, for road lighting.
Lieske Part No.: 2091225

Spare part for product family AMPHIBIA, fastening set made of ,
Lieske Part No.: 2090531

External mast adapter, diameter 76mm, for road lighting.
Lieske Part No.: 2091968

Rear bracket made of stainless steel (V4A) for all-round lateral cable entry for the ceiling and wall-mounted luminaire of the RESCLITE PROtect
Lieske Part No.: 2091256

Installation frame (2-way) with plastering frame (trimless) for plaster ceilings, plastering edges for sharp-edged and on-site filling of the installation joints with gypsum plaster, serves as a platform for flexible combination of the LED light modules DIAMO MD, the frame enables the built-in light modules to be rotatable (180°) and tiltable (2x20°, SP/FL/VFL), simple tool-free installation of the LED light modules in the installation frame using CLIX technology, frame made of polycarbonate (PC), white, plastering frame made of die-cast aluminum, tool-free ceiling installation of the installation frame using retaining springs for ceiling thicknesses 1-25 mm, ceiling cutout: 202x107mm, installation depth of the LED accent light modules: 150 mm, external dimensions of the frame: 222x127x79 mm, weight: 0.22 kg, note: LED light modules DIAMO MD must be ordered separately!
Lieske Part No.: 2090513

Clips for steel cable suspension (2 pieces), for tool-free pendulum assembly of the SUPERSYSTEM integral H-channel profile, clips made of extruded aluminum, black, dimensions: 20x44x53 mm, weight: 0.04 kg, Note: Steel cable suspensions must be ordered separately!
Lieske Part No.: 2091214

Spacers (2 pieces), for flush installation (trimless) of a SUPERSYSTEM integral system in a cavity ceiling, enable continuous built-in installation of a SUPERSYSTEM INTEGRAL system consisting of Zumtobel 3-phase/L3+DALI power tracks and SUPERSYSTEM INTEGRAL light/blind inserts, for fastening a Zumtobel power track system offset in depth, installation joints with plaster frames (trimless) must be provided on site for the SUPERSYSTEM INTEGRAL system, centering of the Zumtobel 3-phase/L3+DALI power track using installation aid (included in delivery, material: die-cast aluminum, black, distance between the holders maximum every 1000mm, designed for ceiling thicknesses of 12.5mm, dimensions: 51x145x87 mm, weight: 0.35 kg, note: observe ceiling substructure in accordance with DIN EN 13964!
Lieske Part No.: 2091203

Blind insert for continuous line, for closing module openings in the U or H channel profile, as well as for covering connectors and feeds, for closing gaps in the busbar system with surface mounting or pendant suspension or flush ceiling installation (trimless), with 8 mounting clips and 2 end plates, length: 2000mm, profile material: sharp-edged aluminum, extruded, white powder-coated, for cutting to the desired length on site, end plates: polycarbonate (PC), white, mounting clips: polycarbonate (PC), tool-free plug & play installation and deinstallation, dimensions: 2000x35x50 mm, weight: 1.75 kg
Lieske Part No.: 2091960

Installation ring (1-way) with cover ring, serves as a platform for flexible combination of the DIAMO MD LED light modules, the ring enables the built-in light module to be rotatable (180°) and tiltable (2x20°, SP/FL/VFL), simple tool-free installation of the LED light module in the installation ring using CLIX technology, ring made of die-cast aluminum, white, tool-free ceiling installation of the installation ring using fastening springs for ceiling thicknesses 1-25 mm, ceiling cutout: diameter 100 mm, installation depth of the LED accent light modules: 150 mm, external dimensions of the ring: diameter 111x77 mm, weight: 0.11 kg, note: LED light module DIAMO MD must be ordered separately!
Lieske Part No.: 1056611

Einbauprofil trimless zum deckenbündigen Einbau in Decken, als Anputzprofil, Länge: 4000mm, zum Anschluss von Profilen, Verbindern und elektrischer Einspeisung, Niedervolt-Stromschiene (48V) dient zur Aufnahme von SUPERSYSTEM II Strahlern und Lichteinsätzen mit Niedervolt-Adapter (48V), werkzeuglose Befestigung der Strahler und Lichteinsätze, Strahler und Lichteinsätze (dimmbar Dali only) sind über das Powerline Signal in der Niedervolt-Stromschiene einzeln adressier-/ steuerbar, Tragprofil aus Aluminiumstrangpressprofil schwarz, pulverbeschichtet, stirnseitige elektische Einspeisung bzw. Abdeckplatten separat zu bestellen, Abmessungen: 4000x64x31 mm, Gewicht: 2,8 kg Hinweis: Für bauseitigen Zuschnitt auf die gewünschte Länge, Set zur Pendelmontage bitte separat bestellen, auf Anfrage kann optional die Stromschienen-Öffnung durch ein Abdeckprofil geschlossen werden!
Lieske Part No.: 890253

Angle connector 90° (electrical) with feed, for mechanical and electrical angle connection (90°), consisting of two low-voltage power rails (U-profiles) each with 1000 mm, connector, cable bridge with contact clips, connecting cable (48V) and cover, connector made of sheet steel, cover made of polycarbonate (PC) painted white, connecting cable 3000 mm, weight: 1.43 kg
Lieske Part No.: 1343763

Lieske Part No.: 842536

3-way distributor, weight: 0.01 kg
Lieske Part No.: 1348277

6-way distributor, weight: 0.01 kg
Lieske Part No.: 1348276

Connecting cable (1 m), weight: 0.01 kg
Lieske Part No.: 1348275

H-covering profile (2 pieces), length: 2000mm, for covering the Zumtobel 3-phase / L3 + DALI power tracks and the SUPERSYSTEM integral power track light inserts (direct / indirect beam) as an H-channel profile, the top of the channel is used to accommodate the indirect beam light inserts, the light inserts are flush-mounted in the channel profile and enable a consistent appearance, material: aluminum, extruded, black powder-coated, for cutting to the desired length on site, simple tool-free installation using mounting clips, to be ordered separately (maximum every 500mm), tool-free pendulum installation of the SUPERSYSTEM INTEGRAL power track channel profile possible, dimensions: 2000x5x114 mm, weight: 2.33 kg, note: clips (black or white) and steel cables for pendulum suspension of the H-channel profile must be ordered separately! Note: For busbar systems with angle connectors, covering profiles with 45° mitre angles for the outside corners must be ordered separately or created on site. End plates for closing the H-channel profile ends and blind inserts for closing module openings can be ordered separately!
Lieske Part No.: 2091202

Mounting clips (5 pieces), for easy, tool-free installation of the U/H lamination profiles SUPERSYSTEM integral, clips made of polycarbonate (PC), black, tool-free installation, dimensions: 30x54x36 mm, weight: 0.03 kg, note: one mounting clip in the U/H lamination profile every 500 mm at most!
Lieske Part No.: 2091201

Suspension (set) consisting of: white suspension cover, steel rope: diameter 1.8 mm, length 2000 mm, Patentabhänger for stepless height adjustment, fastening the cover Patentabhängers or current rail side possible maximum tensile load: 20 kg Type: 60,280,061


Quantity: 1 unit.
Lieske Part No.: 193117

Suspension (set) consisting of: suspension cover black, steel wire: Diameter
, 8 mm, length 2 mm, Patentabhänger for stepless height adjustment, attachment of Patentabhängers cover or current rail side possible maximum tensile load: 2 kg Type: 6 28 62 Quantity:
ST.
Lieske Part No.: 853693

Steel cable suspension (set), consisting of: black suspension dome, steel cable: diameter 1.8 mm, length 5000 mm, patented hanger for stepless height adjustment, fastening of the patented hanger on the ceiling or conductor rail side possible, maximum tensile load: 20 kg
Lieske Part No.: 374131

Wall mounting bracket for fixing Zumtobel spotlights in horizontally or vertically mounted Zumtobel power tracks, material: made of die-cast aluminum, white, note: can only be used in Zumtobel 3-phase power tracks in combination with Zumtobel 3CU/3CD adapters, cannot be used with spotlights with ADAPTER-TRACKBOX
Lieske Part No.: 966894

Wall mounting bracket for fixing Zumtobel spotlights in horizontally or vertically mounted Zumtobel power tracks, material: made of die-cast aluminum, black, Note: Can only be used in Zumtobel 3-phase power tracks in combination with Zumtobel 3CU/3CD adapters, cannot be used with spotlights with ADAPTER-TRACKBOX
Lieske Part No.: 966896

Pendulum tube, white, diameter 13.5 mm, length 2000 mm, pendulum tube can be shortened on site, installation by means of screw fastening, weight: 1.5 kg
Lieske Part No.: 2096174

Pendulum tube, copper-coloured, diameter 13.5 mm, length 2000 mm, pendulum tube can be shortened on site, installation by means of screw fastening, weight: 1.5 kg
Lieske Part No.: 2096175

Lieske Part No.: 322171

L3+DALI initial feed, black, protective conductor on the left, polarization nose on the right, plastic parts made of polycarbonate (PC), cable entry on the front and from the side of the rail back, maximum current load of the phase: 16A, installation dimensions: 68x34x34 mm, overall dimensions: 110x34x34 mm
Lieske Part No.: 967856

L3+DALI center feed, white, protective conductor on the right, plastic parts made of polycarbonate (PC), cable entry from the side of the rail back, maximum current load of the phase: 16A, installation dimensions: 102x33x33 mm, overall dimensions: 187x33x33 mm
Lieske Part No.: 966784

L3+DALI center feed, black, protective conductor on the right, plastic parts made of polycarbonate (PC), cable entry from the side of the rail back, maximum current load of the phase: 16A, installation dimensions: 102x33x33 mm, overall dimensions: 187x33x33 mm
Lieske Part No.: 966788

L3+DALI angle connector, white, protective conductor inside, polarization nose outside, for mechanical and electrical connection of two power rails, for feeding two power rails, plastic parts made of polycarbonate (PC), cable entry from the side of the rail back, installation dimensions: 68x68x34 mm, overall dimensions: 110x110x34 mm
Lieske Part No.: 967849

L3+DALI angle connector, black, protective conductor inside, polarization nose outside, for mechanical and electrical connection of two power rails, for feeding two power rails, plastic parts made of polycarbonate (PC), cable entry from the side of the rail back, installation dimensions: 68x68x34 mm, overall dimensions: 110x110x34 mm
Lieske Part No.: 480246

L3+DALI angle connector, white, protective conductor outside, polarization nose inside, for mechanical and electrical connection of two power rails, for feeding two power rails, plastic parts made of polycarbonate (PC), cable entry from the side of the back of the rail, installation dimensions: 68x68x34 mm, overall dimensions: 110x110x34 mm
Lieske Part No.: 983473