Drawbar with E27 socket with external thread including screw ring With lamp terminal Snap-on roof cap: DEGM No. 9206220.2 Load capacity: max. 6kg Pendulum length: 70cm Extension length/standard: approx. 120cm Canopy diameter: 73mm/90mm Canopy can be screwed Snap-on roof cap color-coordinated Cables: H03VVH2-F, 2x0.75qmm H03VV-F, 2x0.75qmm VDE-compliant installation, individually tested white RAL 9010 Number of cores: 2 Color: white Nominal cross-section: 0.75qmm
Lieske Part No.: 731404

Drawbar with E27 socket with external thread including screw ring With lamp terminal Snap-on roof cap: DEGM No. 9206220.2 Load capacity: max. 6kg Pendulum length: 70cm Extension length/standard: approx. 120cm Canopy diameter: 73mm/90mm Canopy can be screwed Snap-on roof cap color-coordinated Cables: H03VVH2-F, 2x0.75qmm, H03VV-F, 2x0.75qmm VDE-compliant installation, individually tested brown RAL 8014, color: brown Number of cores: 2 Nominal cross-section: 0.75qmm
Lieske Part No.: 742249

Drawbar with E27 socket with external thread including screw ring With lamp terminal Snap-on roof cap: DEGM No. 9206220.2 Load capacity: max. 6kg Pendulum length: 70cm Extension length/standard: approx. 120cm Canopy diameter: 73mm/90mm Canopy can be screwed Snap-on roof cap color-coordinated Cables: H03VVH2-F, 2x0.75qmm, H03VV-F, 2x0.75qmm VDE-compliant installation, individually tested gold, Color: Gold, Nominal cross-section: 0.75qmm, Number of cores: 2
Lieske Part No.: 318820

Round cables For incandescent and halogen lamps Cotton insulated Designation: H03RT-F Other colors on request Length: 100m Ring sheath material: Textile Nominal voltage U: 300V Nominal conductor cross-section: 0.75qmm Number of cores: 3 Permissible cable external temperature, in motion: 60°C
Lieske Part No.: 498227

Table clamp for all magnifying, rod and flexible hose lights, clamp width: 0 - 65 mm.
Lieske Part No.: 1055086

Table clamp for all magnifying glasses, rod and flexible hose lights, clamp width: 0 - 45 mm.
Lieske Part No.: 2050021

Table base for MINELA and RING LED, black.
Lieske Part No.: 2050022

Magnetic base with a diameter of 89 mm and a height of 8.5 mm. Mounting hole 63.6 x 63.6 mm for standard base.
Lieske Part No.: 1989948

Table clamps DIVA, clamping range 0 - 139 mm, model TKC, black.
Lieske Part No.: 2050024

Table clamp PARA.MI, span 10 - 35 mm, vertical connection, model TKF 1 / 35 A, black.
Lieske Part No.: 2050025

Adapter PARA.MI, with slot nut M4, Allen screw, horizontal connection, black.
Lieske Part No.: 2050026

Lamp holder for FLAT LED surface-mounted light, adjustable.
Lieske Part No.: 2050027

Connection cable for TAMETO for connecting through-wired lights, 3 m cable, CEE 7/7 (Schuko plug) - Wieland GST18i3.
Lieske Part No.: 1989336

Wall bracket for MINELA, RING LED, ROCIA rod lights, ROCIA flexible tube lights and ABLTL, black.
Lieske Part No.: 2050029

ATARO slip-on pin, insertion depth 20 - 28 mm, ø 36 mm, black.
Lieske Part No.: 2050030

Socket for workplace lights, insertion depth 27 mm, black.
Lieske Part No.: 2050031

Connection cable for LUMATRIS (< 48 W), MACH LED PLUS (24 V without DV), HEAD LED, ONE LED (without DV), MKEL and RL 25 LE, 3 m cable, 5 x 0.5 mm², M12 socket: straight, 5-pin, A-coded, DV: through-wired (for chaining several lights).
Lieske Part No.: 2050033

Connection socket for MACH LED PLUS (24 V with through-wiring), ONE LED (through-wiring) and RL 25 LE, cable passage 6 - 8 mm, wires <= 1.5 mm², M12 socket: straight, 4-pin, A-coded.
Lieske Part No.: 2050034

Connection plug for MACH LED PLUS (24 V with DV) and ONE LED (DV), cable outlet 6 - 8 mm, wires <= 1.5 mm², M12 connector: straight, 4-pin, A-coded, DV: through-wired (for chaining several lights).
Lieske Part No.: 2050035

Connection socket for MACH LED PLUS (100 / 120 / 220 - 240 V), cable outlet 6 - 8 mm, wires <= 1.5 mm², M12 socket: straight, 4-pin, S-coded.
Lieske Part No.: 2050036

Connection socket for MACH LED PLUS (100 / 120 / 220 - 240 V), cable passage 8 - 10 mm, wires <= 1.5 mm², M12 socket: straight, 4-pin, S-coded.
Lieske Part No.: 2050037

Support rail made of galvanized sheet steel, with integrated current-carrying profile and colored marking.
Lieske Part No.: 1989440

Sealing clamp for mounting rail in IP54 application, for increased chemical resistance.
Lieske Part No.: 1989339

Power supply (electrical) rigid for wires (<= 2.5mm²), including cable entry, 5-pole.
Lieske Part No.: 1989340

Fastening: Suspension with wire rope, 3000 mm, including eyelet for hook (ceiling).
Lieske Part No.: 1989446

Fastening: Suspension with hooks, including quick adjustment.
Lieske Part No.: 1989342

Installation frame for LUMATRIS, for luminaire size 246 x 95 mm, silver grey.
Lieske Part No.: 2050038

Installation frame for LUMATRIS, for luminaire size 596 x 95 mm, silver grey.
Lieske Part No.: 2050039

Installation frame for LUMATRIS, for luminaire size 770 x 95 mm, silver grey.
Lieske Part No.: 2050040

Lamp holder set for MACH LED PLUS.forty, adjustable +/-90°.
Lieske Part No.: 2050041

Protective cap for MACH LED PLUS (DV) and ONE LED (DV), 10 pieces for M12 socket, DV: Through-wired (for chaining several lights).
Lieske Part No.: 2050042

Light holder set for TAMETO for C-rails (pair), adjustable, black.
Lieske Part No.: 2050043

Lamp holder set for MACH LED PLUS.seventy, adjustable +/-65°.
Lieske Part No.: 2050044

Lamp holder set for RL 40.
Lieske Part No.: 2038984

Lamp holder set for WLA system light in dusty grey, special feature 90° angle.
Lieske Part No.: 1989439

Wire rope for TAUREO and ACANEO, 3000 mm, threaded rod M8 for trapeze hanger.
Lieske Part No.: 2050045

Wire rope for TAUREO and ACANEO, 3000 mm, carabiner for eyebolts (ceiling).
Lieske Part No.: 2050046

Table clamp AVENUE, clamping range 0 - 70 mm, model TK 1 / 70, black.
Lieske Part No.: 2050047

Chain suspension for tool-free connection of the support rail using CLIX technology. Height adjustable. Fastening spring made of stainless spring steel V2A. Dimensions: 112 x 56 x 30 mm Weight: 0.08 kg
Lieske Part No.: 632965

Ceiling sensor for the detection of the incident sunlight through the window in the room, with built-in slide switch next to the terminal to switch to a higher sensitivity (up to
Or lux to 5 lux), for connection to daylight-dependent control units, using standard installation materials. The connections are made via screw terminals, housing made of flame-retardant polycarbonate, halogen-free, suitable for mounting on the ceiling, IP2 protection, protection class II, Ambient temperature 5 ° C. ... Type: 2 73
9 6 item:
ST.
Lieske Part No.: 962276

Type: 2 9285
8 item:
ST.
Lieske Part No.: 828709

Suction Cup Weight:
kg Type: 2 935455 Quantity:
ST.
Lieske Part No.: 512235

Bus power supply to the bus system with
up to 5VDC
bus, cascadable, Continuous short circuit protection. On the output side connection for bus line, polarity reversible, to supply the terminal and connection of signal relay, using standard installation material error feedback to the system possible, including status LED to indicate the operating status. Housing made &#8203;&#8203;of flame-retardant polycarbonate, halogen-free, suitable for panel mounting on 35mm DIN rail according to EN 22 5, IP2 protection, ambient temperature to 5 ° C. Type: 2 975247 Quantity:
ST.
Lieske Part No.: 734523

Flexible connector to connect LINELIGHT lights around corners and curves. Weight: 0.63 kg
Lieske Part No.: 2090528

White cap rail cut from plastic. Weight: 0.1kg Type: 22,065,758


Quantity: 1 unit.
Lieske Part No.: 657731

Wall fastener for tool-free connection of trunking using CLIX technology. Mounting spring made of stainless steel V2A.Maximum tensile load 3 kg. Dimensions: 4 x 7 x 5 mm, weight:
kg Type: 22
28
4 item:
ST.
Lieske Part No.: 864242

DIN rail shim made of profiled steel sheet coated with white polyester resin enamel. Simple connection via electrical feed-set. Dimensions:
x 6 x 54 mm, weight:
, 7 kg Type: 22
28 2 Quantity:
ST.
Lieske Part No.: 969876

Rail made of profiled steel sheet coated with white polyester resin enamel.

Conductor embedded in an integrated Stromleitprofil. 5 network cables and 2 x 2 conductors for the integration of emergency based on two separate circuits independently and as a 2 wire control line. Simple connection via electrical feed-set. Dimensions: 25 x 6 x 54 mm, Weight: 4.5 kg Type: 22
28 42 Quantity:
ST.
Lieske Part No.: 970050

Rail made of profiled steel sheet coated with white polyester resin enamel.

Conductor embedded in an integrated Stromleitprofil. 5 network cables and 2 x 2 conductors for the integration of emergency based on two separate circuits independently and as a 2 wire control line. Simple connection via electrical feed-set. Dimensions: 35 x 6 x 54 mm, weight: 6,
kg Type: 22
28 77 Quantity:
ST.
Lieske Part No.: 704508

Circle control device with angular buttons for calling up three room scenarios (so-called moods). The active mood is displayed with a green LED. Central come/go button, which is pressed when entering and leaving the room. If the 'go' mood is active (room user absent), the come/go button is illuminated in red to aid orientation. In addition, the operator has two equipment button rockers available to intervene in the active mood, which can be used to adjust two of the room's trades. The housing and buttons are made of plastic, with a satin finish, white. All buttons are printed with intuitive pictograms. Installation takes place in a simple standard Euro box or a UK metal back box (not included in delivery); screws are not visible after installation. The control device is connected to the bus and optionally to the supply (both can be reversed) using a screw terminal. The power supply is via an external power supply 24VDC or AC, 300mW (not included) or directly via the bus. Dimensions: 87 x 87 x 13 mm, weight: 0.15 kg.
Lieske Part No.: 553429