Installation Material

Linergy TR is a terminal block for Linergy. It belongs to the lock washer terminal block with a nominal cross-section of 4 mm². The rated operating voltage is 600 V according to CSA/cURus and 500 V according to EN/IEC 60947-7-1. The rated current is 6.3A according to EN/IEC 60947-7-1, 6.3A according to CSA and 12A cURus. It has a black surface treatment. Assembly by clipping and side connection with 5x20mm fuse. Connection and disconnection can be done with a screwdriver. It is compatible with space enclosures for Prisma G, Prisma P, Pragma, Prisma PH, Prisma Pack, Spacial, Kaedra, TeSys. Sold in batches of 50 units. Ambient air temperature for operation is from -40 to 130 °C according to IEC 60216-1 and VDE 0304-T21. Certified according to several standards (CSA, cURus, EAC). It is compliant with Green Premium (RoHS/REACH).
Sales unit: 50 pieces
Lieske Part No.: 1850700

Linergy fuse disconnect terminal block, 4mm2, 6.3A, 1 Eb, 1x1, screw, black.
Sales unit: 50 pieces
Lieske Part No.: 1850699

Linergy TR is a terminal block for Linergy. It belongs to the lock washer terminal block with a nominal cross-section of 4 mm². The rated operating voltage is 600 V according to CSA/cURus and 500 V according to EN/IEC 60947-7-1. The rated current is 6.3A according to EN/IEC 60947-7-1, 6.3A according to CSA and 12A cURus. It has a black surface treatment. Assembly by clipping and side connection with 5x20mm fuse. Connection and disconnection can be done with a screwdriver. It is compatible with space enclosures for Prisma G, Prisma P, Pragma, Prisma PH, Prisma Pack, Spacial, Kaedra, TeSys. Sold in batches of 50 units. Ambient air temperature for operation is from -40 to 130 °C according to IEC 60216-1 and VDE 0304-T21. Certified according to several standards (CSA, cURus, EAC). It is compliant with Green Premium (RoHS/REACH).
Sales unit: 50 pieces
Lieske Part No.: 1850698

Linergy fuse disconnect terminal block, 16mm2, 10A, 1 Eb, 1x1, screw, black.
Sales unit: 50 pieces
Lieske Part No.: 1850697

Linergy fuse disconnect terminal block, 16mm2, 10A, 1 Eb, 1x1, screw, black.
Sales unit: 50 pieces
Lieske Part No.: 1850701

Linergy knife-edge terminal block, 4mm2, 20A, 1 level, 1x1, screw, orange.
Sales unit: 50 pieces
Lieske Part No.: 1850772

Screw connection technology. Feed-through terminals. Screw terminal block, feed-through, 2 points, 4 mm², white. Pack of 50.
Sales unit: 50 pieces
Lieske Part No.: 1850779

Linergy terminal block for feed-through, 4mm2, 32A, 1 level, 1x2, screw, grey.
Sales unit: 50 pieces
Lieske Part No.: 1850762

Linergy TR is a terminal block for Linergy. It belongs to the Linergy feed-through terminal block with a nominal cross-section of 4 mm². The rated operating voltage is 150V according to cURus, 500V according to EN/IEC 60947-7-1 and 352V according to ATEX Exe II Ex II 2 GD. The rated current is 32A according to EN/IEC 60947-7-1, 30A according to CSA/cURus and 29A according to ATEX Exe II Ex II 2 GD. It has a grey surface treatment. Snap-on assembly and side connection using single-level 1x1 screw terminals. Connection and disconnection can be done with a screwdriver. It is compatible with space enclosures for Prisma G, Prisma P, Pragma, Prisma PH, Prisma Pack, Spacial, Kaedra, TeSys. Sold in batches of 50 units. Ambient air temperature for operation is from -40 to 130 °C according to IEC 60216-1 and VDE 0304-T21. Certified according to several standards (ATEX, CSA, cURus, DNV, GL, LR, IEC-Ex, EAC). It is compliant with Green Premium (RoHS/REACH).
Sales unit: 50 pieces
Lieske Part No.: 1850774

Linergy TR is a terminal block for Linergy. It belongs to the Linergy feed-through terminal block with a nominal cross-section of 4 mm². The rated operating voltage is 600 V according to CSA/cURus, 800 V according to EN/IEC 60947-7-1 and 440 V according to ATEX Exe II Ex II 2 GD. The rated current is 30A according to EN/IEC 60947-7-1, 30A according to CSA/cURus and 25.5A according to ATEX Exe II Ex II 2 GD. It has a gray surface treatment. Assembly by snap-on and side connection by means of double-deck 1x1 screw terminals. Connection and disconnection can be done with a screwdriver. It is compatible with spatial enclosures for Prisma G, Prisma P, Pragma, Prisma PH, Prisma Pack, Spacial, Kaedra, TeSys. Sold in batches of 50 units. Ambient air temperature for operation is from -40 to 130 °C according to IEC 60216-1 and VDE 0304-T21. Certified according to several standards (ATEX, CSA, cURus, DNV, GL, LR, IEC-Ex, EAC). It is compliant with Green Premium (RoHS/REACH).
Sales unit: 50 pieces
Lieske Part No.: 1850790

Linergy earthing terminal, 4mm2, one level, 1x1, screw, green-yellow.
Sales unit: 50 pieces
Lieske Part No.: 1850702

Screw connection technology. Protective conductor terminal blocks. Screw terminal block, protective conductor, 4 points, 4 mm², double-deck. PU 50.
Sales unit: 50 pieces
Lieske Part No.: 1850703

Screw connection technology. Protective conductor terminal blocks. Screw terminal block, protective conductor, 2 points, 50 mm². PU 10.
Sales unit: 10 pieces
Lieske Part No.: 1850777

Screw connection technology. Feed-through terminals. Screw terminal block, feed-through, 2 points, 6mm². PU 50.
Sales unit: 50 pieces
Lieske Part No.: 1850778

Screw connection technology. Feed-through terminals. Screw terminal block, feed-through, 2 points, 6mm², blue. Pack of 50.
Sales unit: 50 pieces
Lieske Part No.: 1850761

Screw connection technology. Protective conductor terminal blocks. Screw terminal block, protective conductor, 2 points, 6mm². PU 50.
Sales unit: 50 pieces
Lieske Part No.: 1850690

Screw connection technology. Feed-through terminals. Screw terminal block, feed-through, 2 points, 70 mm². PU 10.
Sales unit: 10 pieces
Lieske Part No.: 1850776

Harmony Relay. Label plate for attaching to the RXZE2 relay socket of the RXM miniature relays, except RXZE2M114 and RXZE2S114S.
Sales unit: 100 pieces
Lieske Part No.: 415115

Connector set for Modicon M171/M172 I/O expansion modules. Suitable for version with 14 I/O.
Lieske Part No.: 1859984

Connector set for Modicon M171/M172 I/O expansion modules. Suitable for version with 27 I/O.
Lieske Part No.: 1859983

Connector set for Modicon M172 I/O expansion modules. Suitable for version with 12 I/O.
Lieske Part No.: 1869197

Connector set for Modicon M172 PLC controllers. Suitable for version with 28 I/O.
Lieske Part No.: 1859798

Connector set for Modicon M172 PLC controllers. Suitable for version with 42 I/O.
Lieske Part No.: 1859797

Dieser OsiSense XS flache (40 x 40 x 40 x 15 mm) induktive Näherungssensor hat ein PBT-Gehäuse. Er hat einen Schaltabstand von 25 mm, Schließer-Funktion und einen 1/2--20 unf-Stecker. Es hat eine Versorgungsspannung von 24 bis 240VAC/dc. Dieser universelle flache induktive Näherungssensor hat eine größere Reichweite. Es ist dank 4 Schraubenbefestigungspunkten direkt auf einer Fläche montierbar und ist CCC, ECOLAB, CSA, UL zertifiziert.
Lieske Part No.: 945832

Dieser OsiSense XS Revolverkopf (40 x 40 x 117 mm) mit induktivem Näherungssensor hat ein PBT-Gehäuse. Er hat einen Schaltabstand von 40mm, Öffner oder Schließer (wählbar) Funktion und eine m20 Kabeleinführung. Es hat eine Versorgungsspannung von 24 bis 240VAC/dc. Dieser universelle flache induktive Näherungssensor hat eine größere Reichweite. Es ist dank 4 Schraubenbefestigungspunkten direkt auf einer Fläche montierbar und ist CCC, ECOLAB, CSA, UL zertifiziert.
Lieske Part No.: 605684

Accessories: Mounting accessories Pipe clamp (1 pair) Stainless steel material 1.4571 2' with support and 4 screws M8 also for mast
Lieske Part No.: 541593

Accessories: Mounting accessories Support rail 3.065mm painted steel Housing painted steel Support rail system TRS 1000 EAN/GTIN:4041254205564
Lieske Part No.: 752004

Accessories: Mounting accessories Support rail 4.595mm painted steel Housing painted steel Support rail system TRS 1000 EAN/GTIN:4041254205571
Lieske Part No.: 857527

Accessories: Mounting accessories Connector galvanized steel for support rail connection Housing galvanized steel Support rail system TRS 1000 EAN/GTIN:4041254205588
Lieske Part No.: 903981

Accessories: Mounting accessories Swing hook galvanized steel for chain pendulum Housing galvanized steel Support rail system TRS 1000 EAN/GTIN:4041254205595
Lieske Part No.: 363228

Accessories: Mounting accessories Cover strip 1.538mm plastic housing Plastic mounting rail system TRS 1000 EAN/GTIN:4041254205618
Lieske Part No.: 127244

Accessories: Mounting accessories End cap (1 pair) Plastic housing Plastic mounting rail system TRS 1000 EAN/GTIN:4041254206110
Lieske Part No.: 597276

Accessories: Mounting accessories Luminaire suspension (1 pair) Galvanized steel Housing Galvanized steel Support rail system TRS 1000 EAN/GTIN:4041254206127
Lieske Part No.: 338325

Accessories: Mounting accessories Ceiling rail made of stainless steel for mounting rail fastening Housing made of stainless steel Mounting rail system TRS 2000 EAN/GTIN:4041254162195
Lieske Part No.: 265273

Accessories: Mounting accessories Ring nut stainless steel for chain pendulum Housing stainless steel Support rail system TRS 2000 EAN/GTIN:4041254162249
Lieske Part No.: 947585

Accessories: Mounting accessories Ceiling rail made of stainless steel for mounting rail fastening Housing made of stainless steel Mounting rail system TRS 2000 EAN/GTIN:4041254162256
Lieske Part No.: 933713

Accessories: Mounting accessories Luminaire suspension (1 pair) Stainless steel housing Stainless steel mounting rail system TRS 2000 EAN/GTIN:4041254162263
Lieske Part No.: 515247

Use the 3M Scotchlok UR-2 connector with its special insulation displacement contact to create a reliable electrical connection to wires in communication cables. The conductor is inserted into the U-contact connector, creating a spring-loaded connection. This removes the insulation and presses all conductors together with a firm, elastic pressure in one motion. The conductor insulation does not need to be removed. 3M Scotchlok connectors are factory filled with sealant that protects against corrosion and moisture. They are also available in a dry version for indoor use. Various sizes and wire combinations are available to meet all requirements. Solid wire size 0.4 mm to 0.9 mm with a maximum insulation diameter of 2.08 mm.
Sales unit: 100 pieces
Lieske Part No.: 695350

3MT ScotchCodeT Leitungs-Marker-Dispenser mit Beschriftung sind kompakte und praktische Kabelmarkierungssysteme. Mit dem Dispenser können Sie mit einem Permanentmarker eigene, selbstlaminierende Etiketten schreiben.
Schreiben Sie maßgeschneiderte, selbstlaminierende Etiketten mit den 3MT ScotchCodeT Leitungs-Marker-Dispenser mit Beschriftung. Dieser einzigartige, ergonomisch entwickelte Dispenser besteht aus langlebigem Kunststoff, der die gestanzten Klebemarker schützt. Er enthält ein Klebeband mit einer transparenten Vinylfolie mit einem druckempfindlichen Acrylhaftklebstoff. Das Klebeband widersteht einem weiten Temperaturbereich von -40 °C bis 80 °C und ist damit ideal für industrielle elektrische Anwendungen. Geeignet für den Einsatz auf Fernsehern, Sicherheits- und Sprinklersystemen, Steckern, Schläuchen, Autoalarmanlagen, Schläuchen, Lüftungsöffnungen, Golfschlägern und mehr.
Sales unit: 10 pieces
Lieske Part No.: 148535

3MT Cold Shrink Insulation Tubing 8420 and 8430 are EPDM tubing that is a unique cold shrink connection system. The products are supplied pre-stretched on a retractable support coil, allowing efficient and easy assembly. When the support coil is retracted after the tubing is positioned, the tubing shrinks to form a watertight seal. The active deformation of the specially formulated material ensures a permanent seal and insulation from the environment.
3MT Cold Shrink Insulation Tubing Series 8420 and 8430 are especially useful for electrical insulation on all solid dielectric (rubber or plastic) insulated wires and cable splices up to 1,000 V. They are suitable for indoor and outdoor use. They often provide good physical protection and environmental shielding for communication lines and other non-electrical applications (including cable jacket repairs). The operating temperature range is -40 °C to 90 °C. In applications where the product is continuously exposed to UV radiation, it should be wrapped with, for example, Scotch® Super 33+T Vinyl Insulation Tape or Scotch® Self-Vulcanizing Silicone Rubber Tape 70.
Sales unit: 10 pieces
Lieske Part No.: 218207

8420 and 8430 cold shrink insulation tubing is EPDM tubing that is a unique cold shrink connection system. The products are supplied pre-stretched on a retractable support coil, allowing efficient and easy assembly. When the support coil is retracted after the tubing is positioned, the tubing shrinks to form a watertight seal. The active deformation of the specially formulated material ensures a permanent seal and insulation from the environment.
8420 and 8430 series cold shrink insulation tubing is especially useful for electrical insulation on all solid dielectric (rubber or plastic) insulated wires and cable splices up to 1,000 V. They are suitable for indoor and outdoor use. They often provide good physical protection and environmental shielding on communication lines and other non-electrical applications (including cable jacket repairs). The temperature range is -40 °C to 90 °C. In applications where the product is continuously exposed to UV radiation, it should be wrapped with Super 33+T vinyl insulation tape or Self-vulcanizing silicone rubber tape 70, for example.
Sales unit: 10 pieces
Lieske Part No.: 876880

Cable marking tape SDR is available as a refill roll for the STD cable marker dispenser as individual numbers, letters or symbols.
Use the cable marking tape refill roll to easily identify terminal blocks, strips, panel wires or switchgear for maintenance and repair. This thin, conformable tape is printed with easy-to-read characters. Made from polyester, the tape is resistant to tarnish, oil, solvents and water. Ideal for phase identification on large or small wires/cables, hoses and spare parts. It is compatible with STD cable markers, which allow for quick and easy use.
Sales unit: 10 pieces
Lieske Part No.: 806668

Cable marking tape SDR is available as a refill roll for the STD cable marker dispenser as individual numbers, letters or symbols.
Use the cable marking tape refill roll to easily identify terminal blocks, strips, panel wires or switchgear for maintenance and repair. This thin, conformable tape is printed with easy-to-read characters. Made from polyester, the tape is resistant to tarnish, oil, solvents and water. Ideal for phase identification on large or small wires/cables, hoses and spare parts. It is compatible with STD cable markers, which allow for quick and easy use.
Sales unit: 10 pieces
Lieske Part No.: 323989

Heat-shrink compression connectors for electrically perfect connections and effective protection against moisture.
The 3MT ScotchlokT heat-shrink compression connectors can be used in installation technology wherever you want to connect single-wire conductors using compression technology. After heat-shrinking, the connectors also provide insulation that protects against moisture. This makes them particularly suitable for use in non-air-conditioned rooms or outdoors. The seamless connectors are made of tinned copper and are surrounded by an insulating layer of polyolefin with an inner coating of hot-melt adhesive. They can withstand a maximum voltage of 600 volts and their maximum operating temperature is 105 °C. The compression connectors are available in red, blue and yellow with a maximum conductor cross-section between 1.0 and 6.0 square millimeters. The maximum corresponds to the conductor cross-section. The ScotchlokT heat-shrink compression connectors are UL and CSA listed for use on flexible cables up to 600V.
Sales unit: 125 pieces
Lieske Part No.: 118268

The HDCW heat shrink tubing is designed for the quick repair of damaged cable sheaths. This winding sleeve is suitable for use for cable and splice insulation up to 1,000 V and can be used as cable sheath material up to 35 kV. It is made of cross-linked polyolefin and has an adhesive that ensures a seal against moisture.
HDCW heat shrink tubing offers excellent protection against mechanical stress. This winding sleeve with hot melt adhesive ensures a permanent and moisture-resistant seal. It is made of cross-linked polyolefin that can withstand adverse application conditions. The design of the winding sleeve enables installation in confined spaces with normal heating. Meets the requirements of ANSI C119.1 and is RoHS compliant.
Sales unit: 5 pieces
Lieske Part No.: 846896

The HDCW heat shrink tubing is designed for the quick repair of damaged cable sheaths. This winding sleeve is suitable for use for cable and splice insulation up to 1,000 V and can be used as cable sheath material up to 35 kV. It is made of cross-linked polyolefin and has an adhesive that ensures a seal against moisture.
HDCW heat shrink tubing offers excellent protection against mechanical stress. This winding sleeve with hot melt adhesive ensures a permanent and moisture-resistant seal. It is made of cross-linked polyolefin that can withstand adverse application conditions. The design of the winding sleeve enables installation in confined spaces with normal heating. Meets the requirements of ANSI C119.1 and is RoHS compliant.
Sales unit: 5 pieces
Lieske Part No.: 804885

The HDCW heat shrink tubing is designed for the quick repair of damaged cable sheaths. This winding sleeve is suitable for use for cable and splice insulation up to 1,000 V and can be used as cable sheath material up to 35 kV. It is made of cross-linked polyolefin and has an adhesive that ensures a seal against moisture.
HDCW heat shrink tubing offers excellent protection against mechanical stress. This winding sleeve with hot melt adhesive ensures a permanent and moisture-resistant seal. It is made of cross-linked polyolefin that can withstand adverse application conditions. The design of the winding sleeve enables installation in confined spaces with normal heating. Meets the requirements of ANSI C119.1 and is RoHS compliant.
Sales unit: 5 pieces
Lieske Part No.: 496222

The cold shrink insulation tubes 8420 and 8430 are EPDM tubes that represent a unique cold shrink connection system. The products are supplied pre-stretched on a removable support coil, which enables efficient and easy installation. When the support coil is pulled out after positioning the tube, the tube shrinks and forms a watertight seal. The active deformation of the specially formulated material ensures permanent sealing and insulation from the environment.
Cold shrink tubes are used to insulate all plastic or rubber insulated cables. The products are supplied pre-stretched on a removable support coil, which enables efficient and easy installation. After assembly, the cold shrink tube provides reliable protection against moisture thanks to its constant radial contact pressure. Its good thermal stability and resistance to acids, alkalis, ozone and UV radiation guarantee long-lasting functionality.
Sales unit: 10 pieces
Lieske Part No.: 205992

Effective cable protection with the simplest application - the coaxial sealing kit does not require any tools for installation.
The 3MT cold shrink coaxial cable sealing kit 98-KC reliably protects coaxial connectors and antenna entries indoors and outdoors from moisture. It is especially suitable for applications with mobile phone antennas and base stations. The cold shrink kit also ensures flexible kink protection. Its simple and quick installation by pulling out the support spiral enables reliable installation even without special tools, such as shrink burners. After installation, the cold shrink tubing provides reliable protection against moisture thanks to its constant radial contact pressure. Its very good thermal stability and resistance to acids, alkalis, ozone and UV radiation guarantee long-lasting functionality.
Sales unit: 10 pieces
Lieske Part No.: 911975

8420 and 8430 cold shrink insulation tubing is EPDM tubing that is a unique cold shrink connection system. The products are supplied pre-stretched on a retractable support coil, allowing efficient and easy assembly. When the support coil is retracted after the tubing is positioned, the tubing shrinks to form a watertight seal. The active deformation of the specially formulated material ensures a permanent seal and insulation from the environment.
8420 and 8430 series cold shrink insulation tubing is especially useful for electrical insulation on all solid dielectric (rubber or plastic) insulated wires and cable splices up to 1,000 V. They are suitable for indoor and outdoor use. They often provide good physical protection and environmental shielding on communication lines and other non-electrical applications (including cable jacket repairs). The temperature range is -40 °C to 90 °C. In applications where the product is continuously exposed to UV radiation, it should be wrapped with Super 33+T vinyl insulation tape or Self-vulcanizing silicone rubber tape 70, for example.
Sales unit: 10 pieces
Lieske Part No.: 689075